NESHAP for Shipbuilding and
Ship Repair Facilities - Surface Coating (40 CFR part 63, subpart
II) (Renewal)
Extension without change of a currently approved collection
No
Regular
02/28/2025
Requested
Previously Approved
36 Months From Approved
02/28/2025
112
100
28,700
25,600
0
0
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for Shipbuilding and Ship Repair
Facilities - Surface Coating applies to owners or operators of
shipbuilding and ship repair facilities with primer and top -coat
applications in manufacturing processes and in ship repair
processes. Owners or operators of shipbuilding and ship repair
facilities are required to report startup, initial performance
test, and retest information. Facilities will also periodically
report emission exceedances, changes to equipment, and comply with
other requirements of the NESHAP. This information is being
collected to assure compliance with 40 CFR Part 63, Subpart
II.
There is a slight increase
adjustment in burden from the most recently approved ICR as
currently identified in the OMB Inventory of Approved Burdens. This
is due to two considerations. First, the regulations have not
changed over the past three years and are not anticipated to change
over the next three years. Second, the growth rate for this
industry is very low or non-existent, so there is no significant
change in the overall burden.
$13,700
No
No
No
No
No
No
No
Muntasir Ali 919 541-0833
ali.muntasir@epa.gov
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.