Download:
pdf |
pdf66456
Federal Register / Vol. 89, No. 158 / Thursday, August 15, 2024 / Notices
DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2011–0185]
Vehicle-Mounted Elevating and
Rotating Work Platforms (Aerial Lifts);
Extension of the Office of Management
and Budget’s (OMB) Approval of
Information Collection (Paperwork)
Requirements
Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comments.
AGENCY:
OSHA solicits public
comments concerning the proposal to
extend the Office of Management and
Budget’s (OMB) approval of the
information collection requirements
specified in the Vehicle-Mounted
Elevating and Rotating Work Platforms
(Aerial Lifts). The purpose of the
requirements is to reduce workers’ risk
of death or serious injury by ensuring
that aerial lifts are in safe operating
condition.
DATES: Comments must be submitted
(postmarked, sent, or received) by
October 15, 2024.
ADDRESSES:
Electronically: You may submit
comments and attachments
electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Docket: To read or download
comments or other material in the
docket, go to https://
www.regulations.gov. Documents in the
docket are listed in the https://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the websites.
All submissions, including copyrighted
material, are available for inspection
through the OSHA Docket Office.
Contact the OSHA Docket Office at (202)
693–2350 (TTY (877) 889–5627) for
assistance in locating docket
submissions.
Instructions: All submissions must
include the agency name and OSHA
docket number (OSHA–2011–0185) for
the Information Collection Request
(ICR). OSHA will place all comments,
including any personal information, in
the public docket, which may be made
available online. Therefore, OSHA
cautions interested parties about
submitting personal information such as
social security numbers and birthdates.
For further information on submitting
comments, see the ‘‘Public
khammond on DSKJM1Z7X2PROD with NOTICES
SUMMARY:
VerDate Sep<11>2014
17:25 Aug 14, 2024
Jkt 262001
Participation’’ heading in the section of
this notice titled SUPPLEMENTARY
INFORMATION. FOR FURTHER INFORMATION
CONTACT: Seleda Perryman, Directorate
of Standards and Guidance, OSHA, U.S.
Department of Labor; telephone (202)
693–2222.
SUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of
the continuing effort to reduce
paperwork and respondent (i.e.,
employer) burden, conducts a
preclearance consultation program to
provide the public with an opportunity
to comment on proposed and
continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (PRA)
(44 U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, the collection
instruments are clearly understood, and
OSHA’s estimate of the information
collection burden is accurate. The
Occupational Safety and Health Act of
1970 (OSH Act) (29 U.S.C. 651 et seq.)
authorizes information collection by
employers as necessary or appropriate
for enforcement of the OSH Act or for
developing information regarding the
causes and prevention of occupational
injuries, illnesses, and accidents (29
U.S.C. 657). The OSH Act also requires
that OSHA obtain such information
with minimum burden upon employers,
especially those operating small
businesses, and to reduce to the
maximum extent feasible unnecessary
duplication of effort in obtaining
information (29 U.S.C. 657).
The following sections describe who
uses the information collected under
each requirement, as well as how they
use it. Manufacturer’s Certification of
Modifications (§ 1910.67(b)(2)). The
Standard requires that when aerial lifts
are ‘‘field modified’’ for uses other than
those intended by the manufacturer, the
manufacturer or other equivalent entity,
such as a nationally recognized testing
laboratory, must certify in writing that
the modification is in conformity with
all applicable provisions of ANSI
A92.2–1969 and the OSHA standard
and that the modified aerial lift is at
least as safe as the equipment was
before modification. Employers are to
maintain the certification record and
make it available to OSHA compliance
officers upon request. This record
provides assurance to employers,
workers, and compliance officers that
the modified aerial lift is safe for use,
thereby preventing failure while
workers are being elevated. The
PO 00000
Frm 00115
Fmt 4703
Sfmt 4703
certification record also provides the
most efficient means for the compliance
officers to determine that an employer is
complying with the Standard.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
agency’s functions to protect workers,
including whether the information is
useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information, and
transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
the approval of the information
collection requirements contained in
Vehicle-Mounted Elevating and Rotating
Work Platforms (Aerial Lifts). There are
no adjustment or program changes
associated with this package. OSHA is
requesting that the burden hours remain
the same.
OSHA will summarize the comments
submitted in response to this notice and
will include this summary in the
request to OMB to extend the approval
of the information collection
requirements.
Type of Review: Extension of a
currently approved collection.
Title: Vehicle-Mounted Elevating and
Rotating Work Platforms (Aerial Lifts).
OMB Control Number: 1218–0230.
Affected Public: Business or other forprofits.
Number of Respondents: 1,000.
Number of Responses: 1,000.
Frequency of Responses: On occasion.
Average Time per Response: One
minute.
Estimated Total Burden Hours: 20.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) electronically at https://
www.regulations.gov, which is the
Federal eRulemaking Portal; or (2) by
facsimile (fax), if your comments,
including attachments, are not longer
E:\FR\FM\15AUN1.SGM
15AUN1
Federal Register / Vol. 89, No. 158 / Thursday, August 15, 2024 / Notices
than 10 pages you may fax them to the
OSHA Docket Office at (202) 693–1648.
All comments, attachments, and other
material must identify the agency name
and the OSHA docket number for the
ICR (Docket No. OSHA–2011–0185).
You may supplement electronic
submission by uploading document files
electronically.
Comments and submissions are
posted without change at https://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and dates of birth.
Although all submissions are listed in
the https://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download from this website. All
submission, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the https://
www.regulations.gov website to submit
comments and access the docket is
available at the website’s ‘‘User Tips’’
link. Contact the OSHA Docket Office at
(202) 693–2350, (TTY (877) 889–5627)
for information about materials not
available from the website, and for
assistance in using the internet to locate
docket submissions.
V. Authority and Signature
James S. Frederick, Deputy Assistant
Secretary of Labor for Occupational
Safety and Health, directed the
preparation of this notice. The authority
for this notice is the Paperwork
Reduction Act of 1995 (44 U.S.C. 3506
et seq.) and Secretary of Labor’s Order
No. 8–2020 (85 FR 58393).
Signed at Washington, DC, on July 29,
2024.
James S. Frederick,
Deputy Assistant Secretary of Labor for
Occupational Safety and Health.
[FR Doc. 2024–18323 Filed 8–14–24; 8:45 am]
BILLING CODE 4510–26–P
NUCLEAR REGULATORY
COMMISSION
I. Obtaining Information and
Submitting Comments
[Docket No. 11006611; NRC–2024–0139]
khammond on DSKJM1Z7X2PROD with NOTICES
Perma-Fix Northwest Richland, Inc.;
Export License Application
Nuclear Regulatory
Commission.
ACTION: Opportunity to provide
comments, request a hearing, and
petition for leave to intervene.
AGENCY:
The U.S. Nuclear Regulatory
Commission (NRC) received and is
considering issuing an export license
SUMMARY:
VerDate Sep<11>2014
17:25 Aug 14, 2024
Jkt 262001
(XW033), requested by Perma-Fix
Northwest Richland, Inc (PFNW) by
application dated June 18, 2024. The
application seeks the NRC’s approval to
return residual radioactive waste to the
country of origin, Mexico. The NRC is
providing notice of the opportunity to
comment, request a hearing, and
petition to intervene on PFNW’s
application.
DATES: Submit comments by September
16, 2024. A request for a hearing or
petition for leave to intervene must be
filed by September 16, 2024.
ADDRESSES: You may submit comments
by any of the following methods;
however, the NRC encourages electronic
comment submission through the
Federal rulemaking website:
• Federal rulemaking website: Go to
https://www.regulations.gov and search
for Docket ID NRC–2024–0139. Address
questions about Docket IDs in
Regulations.gov to Stacy Schumann;
telephone: 301–415–0624; email:
Stacy.Schumann@nrc.gov. For technical
questions contact the individual listed
in the FOR FURTHER INFORMATION
CONTACT section of this document.
• Email comments to:
Hearing.Docket@nrc.gov. If you do not
receive an automatic email reply
confirming receipt, then contact us at
301–415–1677.
• Fax comments to: Secretary, U.S.
Nuclear Regulatory Commission at 301–
415–1101.
• Mail comments to: Secretary, U.S.
Nuclear Regulatory Commission,
Washington, DC 20555–0001, ATTN:
Rulemakings and Adjudications Staff.
For additional direction on obtaining
information and submitting comments,
see ‘‘Obtaining Information and
Submitting Comments’’ in the
SUPPLEMENTARY INFORMATION section of
this document.
FOR FURTHER INFORMATION CONTACT:
Andrea Jones, Office of International
Programs, U.S. Nuclear Regulatory
Commission, Washington, DC 20555–
0001; telephone: 404–997–4443; email:
Andrea.Jones2@nrc.gov.
SUPPLEMENTARY INFORMATION:
A. Obtaining Information
Please refer to NRC–2024–0139 or
Docket No. 11006611 when contacting
the NRC about the availability of
information for this action. You may
obtain publicly available information
related to this action by the following
methods:
• Federal Rulemaking Website: Go to
https://www.regulations.gov and search
for Docket ID NRC–2024–0139.
PO 00000
Frm 00116
Fmt 4703
Sfmt 4703
66457
• NRC’s Agencywide Documents
Access and Management System
(ADAMS): You may obtain publicly
available documents online in the
ADAMS Public Documents collection at
https://www.nrc.gov/reading-rm/
adams.html. To begin the search, select
‘‘Begin Web-based ADAMS Search.’’ For
problems with ADAMS, please contact
the NRC’s Public Document Room (PDR)
reference staff at 1–800–397–4209, at
301–415–4737, or by email to
PDR.Resource@nrc.gov. The export
license application is available in
ADAMS under Accession No.
ML24205A240.
• NRC’s PDR: The PDR, where you
may examine and order copies of
publicly available documents, is open
by appointment. To make an
appointment to visit the PDR, please
send an email to PDR.Resource@nrc.gov
or call 1–800–397–4209 or 301–415–
4737, between 8 a.m. and 4 p.m. eastern
time (ET), Monday through Friday,
except Federal holidays.
B. Submitting Comments
The NRC encourages electronic
comment submission through the
Federal rulemaking website (https://
www.regulations.gov). Please include
NRC–2024–0139 or Docket No.
11006611 in your comment submission.
The NRC cautions you not to include
identifying or contact information that
you do not want to be publicly
disclosed in your comment submission.
The NRC will post all comment
submissions at https://
www.regulations.gov as well as enter the
comment submissions into ADAMS.
The NRC does not routinely edit
comment submissions to remove
identifying or contact information.
If you are requesting or aggregating
comments from other persons for
submission to the NRC, then you should
inform those persons not to include
identifying or contact information that
they do not want to be publicly
disclosed in their comment submission.
Your request should state that the NRC
does not routinely edit comment
submissions to remove such information
before making the comment
submissions available to the public or
entering the comment into ADAMS.
II. Discussion
On June 18, 2024, PFNW submitted
an application to the NRC for a license
to export treated radioactive waste of
Mexican origin. The source of the waste
is the Comisio´n Federal de Electricidad
(CFE) Laguna Verde Nuclear Power
Plant (CFE LVNPP), located in Veracruz,
Mexico. PFNW intends to receive
shipment of incoming waste consisting
E:\FR\FM\15AUN1.SGM
15AUN1
File Type | application/pdf |
File Modified | 2024-08-15 |
File Created | 2024-08-15 |