Vehicle-Mounted Elevating and
Rotating Work Platforms Standard (Aerial Lifts) (29 CFR
1910.67)
Extension without change of a currently approved collection
No
Regular
10/25/2024
Requested
Previously Approved
36 Months From Approved
01/31/2025
1,000
1,000
17
17
0
0
The Standard requires that when aerial
lifts are "field modified" for uses other than those intended by
the manufacturer, the manufacturer or other equivalent entity, such
as a nationally recognized testing laboratory, must certify in
writing that the modification is in conformity with all applicable
provisions of ANSI A92.2-1969 and the OSHA standard and that the
modified aerial lift is at least as safe as the equipment was
before modification. Employers are to maintain the certification
record and make it available to OSHA compliance officers. This
record provides assurance to employers, workers, and compliance
officers that the modified aerial lift is safe for use; thereby,
preventing failure while workers are being elevated. The
certification record also provides the most efficient means for the
compliance officers to determine that an employer is complying with
the Standard.
US Code:
29
USC 657 Name of Law: Occupational Safety and Health Act
US Code: 29
USC 651 Name of Law: Occupational Safety and Health Act
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.