In accordance
with 5 CFR 1320, the information collection is approved for three
years.
Inventory as of this Action
Requested
Previously Approved
12/31/2021
36 Months From Approved
12/31/2018
63
0
63
3,100
0
3,100
56,000
0
56,000
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for Inorganic Arsenic Emissions
from Glass Manufacturing Plants (40 CFR Part 61, Subpart N) apply
to each existing and new glass melting furnace that uses commercial
arsenic as a raw material located at a glass manufacturing plant.
These standards do not apply to pot furnaces; in addition, the
standards do not consider re-bricking as construction or
modification for the purposes of 40 CFR Section 61.05(a). New
facilities include those that commenced construction or
reconstruction after the date of proposal. In general, all NESHAP
standards require initial notifications, performance tests, and
periodic reports by the owners/operators of the affected
facilities. They are also required to maintain records of the
occurrence and duration of any startup, shutdown, or malfunction in
the operation of an affected facility, or any period during which
the monitoring system is inoperative. These notifications, reports,
and records are essential in determining compliance with 40 CFR
Part 61, Subpart N.
Patrick Yellin 202 564-2970
yellin.patrick@epa.gov
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.