60_Day_FR_Notice

22844

Federal Register / Vol. 75, No. 83 / Friday, April 30, 2010 / Notices

(2) Title of the Form/Collection: 2009
Census of Publicly Funded Forensic
Crime Laboratories.
(3) Agency form number, if any, and
the applicable component of the
Department of Justice sponsoring the
collection: The form number is CFCL–1,
Bureau of Justice Statistics, Office of
Justice Programs, U.S. Department of
Justice.
(4) Affected public who will be asked
or required to respond, as well as a brief
abstract: Respondents will represent
Federal, State, and local governments.
This information collection is a census
of public crime laboratories that perform
forensic analyses on criminal evidence.
The information will provide statistics
on laboratories’ capacity to analyze
forensic crime evidence, the number,
types, and sources of evidence received
per year, and the number, types, and
cost of analyses completed.
(5) An estimate of the total number of
respondents and the amount of time
estimated for an average respondent to
respond: It is estimated that 405
respondents will complete a 4.1 hour
form.
(6) An estimate of the total public
burden (in hours) associated with the
collection: The total hour burden to
complete the data collection is 1,660.5
annual burden hours.
If additional information is required
contact: Lynn Bryant, Department
Clearance Officer, United States
Department of Justice, Information
Management and Security Staff, Justice
Management Division, Suite 1600,
Patrick Henry Building, 601 D Street,
NW., Washington, DC 20530.

Schedule

Raw Opium (9600) .......................
Poppy Straw (9650) .....................
Concentrate of Poppy Straw
(9670).

II
II
II

The company plans to import the
listed controlled substances to
manufacture bulk controlled substance
intermediates for sale to its customers.
As explained in the Correction to
Notice of Application pertaining to
Rhodes Technologies, 72 FR 3417
(2007), comments and requests for
hearings on applications to import
narcotic raw material are not
appropriate.
As noted in a previous notice
published in the Federal Register on
September 23, 1975, (40 FR 43745), all
applicants for registration to import a
basic class of any controlled substance
in schedule I or II are, and will continue
to be, required to demonstrate to the
Deputy Assistant Administrator, Office
of Diversion Control, Drug Enforcement
Administration, that the requirements
for such registration pursuant to 21
U.S.C. 958(a); 21 U.S.C. 823(a); and 21
CFR 1301.34(b), (c), (d), (e), and (f) are
satisfied.
Dated: April 26, 2010.
Joseph T. Rannazzisi,
Deputy Assistant Administrator, Office of
Diversion Control, Drug Enforcement
Administration.
[FR Doc. 2010–10115 Filed 4–29–10; 8:45 am]
BILLING CODE 4410–09–P

DEPARTMENT OF JUSTICE

Dated: April 27, 2010.
Lynn Bryant,
Department Clearance Officer, PRA, United
States Department of Justice.

Drug Enforcement Administration

[FR Doc. 2010–10142 Filed 4–29–10; 8:45 am]

Pursuant to § 1301.33(a) of Title 21 of
the Code of Federal Regulations (CFR),
this is notice that on March 16, 2010,
Lonza Riverside, 900 River Road,
Conshohocken, Pennsylvania 19428,
made application by renewal to the
Drug Enforcement Administration
(DEA) to be registered as a bulk
manufacturer of the basic classes of
controlled substances listed in
schedules I and II:

BILLING CODE 4410–18–P

DEPARTMENT OF JUSTICE
Drug Enforcement Administration
Importer of Controlled Substances;
Notice of Application

wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1

Drug

This is notice that on March 15, 2010,
Penick Corporation, 33 Industrial Park
Road, Pennsville, New Jersey 08070,
made application by renewal to the
Drug Enforcement Administration
(DEA) for registration as an importer of
the basic classes of controlled
substances listed in schedule II.
Drug

Schedule

Coca Leaves (9040) .....................

VerDate Mar<15>2010

13:41 Apr 29, 2010

II

Jkt 220001

Manufacturer of Controlled
Substances; Notice of Application

Drug

Schedule

Gamma
hydroxybutyric
acid
(2010).
Amphetamine (1100) ....................
Methylphenidate (1724) ................

I
II
II

The company plans to manufacture
bulk active pharmaceutical ingredients
(APIs) for distribution to its customers.

PO 00000

Frm 00109

Fmt 4703

Sfmt 4703

Any other such applicant, and any
person who is presently registered with
DEA to manufacture such substances,
may file comments or objections to the
issuance of the proposed registration
pursuant to 21 CFR 1301.33(a).
Any such written comments or
objections should be addressed, in
quintuplicate, to the Drug Enforcement
Administration, Office of Diversion
Control, Federal Register Representative
(ODL), 8701 Morrissette Drive,
Springfield, Virginia 22152; and must be
filed no later than June 29, 2010.
Dated: April 26, 2010.
Joseph T. Rannazzisi,
Deputy Assistant Administrator, Office of
Diversion Control, Drug Enforcement
Administration.
[FR Doc. 2010–10116 Filed 4–29–10; 8:45 am]
BILLING CODE 4410–09–P

DEPARTMENT OF LABOR
Occupational Safety and Health
Administration
[Docket No. OSHA–2010–0008]

Construction Fall Protection Systems
Criteria and Practices and Training
Requirements; Extension of the Office
of Management and Budget’s (OMB)
Approval of Information Collection
(Paperwork) Requirements
AGENCY: Occupational Safety and Health
Administration (OSHA), Labor.
ACTION: Request for public comment.
SUMMARY: OSHA solicits public
comments concerning its proposal to
extend OMB approval of the
information collection requirements
contained in the construction standards
on Fall Protection Systems Criteria and
Practices (29 CFR 1926.502) and
Training Requirements (29 CFR
1926.503).
DATES: Comments must be submitted
(postmarked, sent, or received) by June
29, 2010.
ADDRESSES: Electronically: You may
submit comments and attachments
electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal. Follow the
instructions online for submitting
comments.
Facsimile: If your comments,
including attachments, are not longer
than 10 pages, you may fax them to the
OSHA Docket Office at (202) 693–1648.
Mail, hand delivery, express mail,
messenger, or courier service: When
using this method, you must submit
three copies of your comments and
attachments to the OSHA Docket Office,

E:\FR\FM\30APN1.SGM

30APN1

Federal Register / Vol. 75, No. 83 / Friday, April 30, 2010 / Notices
OSHA Docket No. OSHA–2010–0008,
U.S. Department of Labor, Room N–
2625, 200 Constitution Avenue, NW.,
Washington, DC 20210. Deliveries
(hand, express mail, messenger, and
courier service) are accepted during the
Department of Labor’s and Docket
Office’s normal business hours, 8:15
a.m. to 4:45 p.m., e.t.
Instructions: All submissions must
include the Agency name and OSHA
docket number for this Information
Collection Request (ICR) (OSHA Docket
No. OSHA–2010–0008). All comments,
including any personal information you
provide, are placed in the public docket
without change, and may be made
available online at http://
www.regulations.gov. For further
information on submitting comments,
see the ‘‘Public Participation’’ heading in
the section of this notice titled
SUPPLEMENTARY INFORMATION.
Docket: To read or download
comments or other material in the
docket, go to http://www.regulations.gov
or the OSHA Docket Office at the
address above. All documents in the
docket (including this Federal Register
notice) are listed in the http://
www.regulations.gov index; however,
some information (e.g., copyrighted
material) is not publicly available to
read or download through the Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
You may also contact Theda Kenney or
Todd Owen at the address below to
obtain a copy of the ICR.
FOR FURTHER INFORMATION CONTACT:
Michael Buchet, Office of Construction
Services, Directorate of Construction,
OSHA, U.S. Department of Labor, Room
N–3476, 200 Constitution Avenue, NW.,
Washington, DC 20210; telephone (202)
693–2020.
SUPPLEMENTARY INFORMATION:

wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1

I. Background
The Department of Labor, as part of its
continuing effort to reduce paperwork
and respondent (i.e., employer) burden,
conducts a pre-clearance consultation
program to provide the public with an
opportunity to comment on proposed
and continuing information collection
requirements in accordance with the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506(c)(2)(A)). This program
ensures that information is in the
desired format, reporting burden (time
and costs) is minimal, collection
instruments are understandable, and
OSHA’s estimate of the information
collection burden is correct. The
Occupational Safety and Health Act of
1970 (the OSH Act) authorizes

VerDate Mar<15>2010

13:41 Apr 29, 2010

Jkt 220001

information collection by employers as
necessary or appropriate for
enforcement of the OSH Act, or for
developing information regarding the
causes and prevention of occupational
injuries, illnesses, and accidents (29
U.S.C. 657).
The Standards on Construction Fall
Protection Systems Criteria and
Practices (29 CFR 1926.502) and
Training Requirements (29 CFR
1926.503) ensure that employers
provide the required fall protection for
their workers. Accordingly, these
standards have the following paperwork
requirements: Paragraphs (c)(4)(ii) and
(k) of 29 CFR 1926.502, which specify
certification of safety nets and
development of fall protection plans,
respectively, and paragraph (b) of 29
CFR 1926.502, which requires
employers to certify training records.
The training certification requirement
specified in paragraph (b) of 29 CFR
1926.503 documents the training
provided to workers potentially exposed
to fall hazards. A competent person
must train these workers to recognize
fall hazards and in the use of procedures
and equipment that minimize these
hazards. An employer must verify
compliance with this training
requirement by preparing and
maintaining a written certification
record that contains the name or other
identifier of the worker receiving the
training, the date(s) of the training, and
the signature of the competent person
who conducted the training, or of the
employer.
II. Special Issues for Comment
OSHA has a particular interest in
comments on the following issues:
• Whether the proposed information
collection requirements are necessary
for the proper performance of the
Agency’s functions, including whether
the information is useful;
• The accuracy of OSHA’s estimate of
the burden (time and costs) of the
information collection requirements,
including the validity of the
methodology and assumptions used;
• The quality, utility, and clarity of
the information collected; and
• Ways to minimize the burden on
employers who must comply; for
example, by using automated or other
technological information collection
and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend
its approval of the collection of
information requirements contained in
the construction standards on Fall
Protection Systems Criteria and
Practices (29 CFR 1926.502) and

PO 00000

Frm 00110

Fmt 4703

Sfmt 4703

22845

Training Requirements (29 CFR
1926.503). OSHA is requesting a 26,974
burden hour reduction, from 484,082
hours to 457,108 as a result of new
information indicating that the
estimates of the number of safety net
certifications, safety net installations,
and fall protection plans should be
lowered. The Agency will summarize
the comments submitted in response to
this notice, and will include this
summary in its request to OMB to
extend the approval of these
information collection requirements.
Type of Review: Extension of a
currently approved collection.
Title: Construction Fall Protection
Systems Criteria and Practices (29 CFR
1926.502) and Training Requirements
(29 CFR 1926.503).
OMB Number: 1218–0197.
Affected Public: Business or other forprofits; Federal Government; State,
Local, or Tribal Government.
Number of Responses: 5,702,775.
Frequency of Recordkeeping: On
occasion, annually.
Average Time per Response: Time per
response ranges from 5 minutes (.08
hour) to certify a safety net to 1 hour to
develop a fall protection plan.
Estimated Total Burden Hours:
457,108.
Estimated Cost (Operation and
Maintenance): $0.
IV. Public Participation—Submission of
Comments on This Notice and Internet
Access to Comments and Submissions
You may submit comments in
response to this document as follows:
(1) Electronically at http://
www.regulations.gov, which is the
Federal eRulemaking Portal; (2) by
facsimile; (fax) or (3) by hard copy. All
comments, attachments, and other
material must identify the Agency name
and the OSHA docket number for this
ICR (Docket No. OSHA–2010–0008).
You may supplement electronic
submissions by uploading document
files electronically. If you wish to mail
additional materials in reference to an
electronic or facsimile submission, you
must submit them to the OSHA Docket
Office (see the section of this notice
titled ADDRESSES). The additional
materials must clearly identify your
electronic comments by your full name,
date, and docket number so the Agency
can attach them to your comments.
Because of security procedures, the
use of regular mail may cause a
significant delay in the receipt of
comments. For information about
security procedures concerning the
delivery of materials by hand, express
delivery, messenger, or courier service,
please contact the OSHA Docket Office

E:\FR\FM\30APN1.SGM

30APN1

22846

Federal Register / Vol. 75, No. 83 / Friday, April 30, 2010 / Notices

at (202) 693–2350, (TTY (877) 889–
5627).
Comments and submissions are
posted without change at http://
www.regulations.gov. Therefore, OSHA
cautions commenters about submitting
personal information such as social
security numbers and date of birth.
Although all submissions are listed in
the http://www.regulations.gov index,
some information (e.g., copyrighted
material) is not publicly available to
read or download through this Web site.
All submissions, including copyrighted
material, are available for inspection
and copying at the OSHA Docket Office.
Information on using the http://
www.regulations.gov Web site to submit
comments and access the docket is
available at the Web site’s ‘‘User Tips’’
link. Contact the OSHA Docket Office
for information about materials not
available through the Web site, and for
assistance in using the Internet to locate
docket submissions.
V. Authority and Signature
David Michaels, Ph.D., MPH,
Assistant Secretary of Labor for
Occupational Safety and Health,
directed the preparation of this notice.
The authority for this notice is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3506 et seq.) and Secretary of
Labor’s Order No. 5–2007 (72 FR
31160).
Signed at Washington, DC, on April 26,
2010.
David Michaels,
Assistant Secretary of Labor for Occupational
Safety and Health.
[FR Doc. 2010–10036 Filed 4–29–10; 8:45 am]
BILLING CODE 4510–26–P

DEPARTMENT OF LABOR
Employment and Training
Administration

wwoods2 on DSK1DXX6B1PROD with NOTICES_PART 1

[TA–W–72,524]

Norgren Automation Solutions,
Including Workers Whose
Unemployment Insurance (UI) Wages
Are Paid Through Syron Engineering
Erie Engineering and Automation
Division, A Subsidiary of Norgren, Inc.:
Clinton Township, MI; Amended
Certification Regarding Eligibility To
Apply for Worker Adjustment
Assistance
In accordance with Section 223 of the
Trade Act of 1974, as amended (‘‘Act’’),
19 U.S.C. 2273, the Department of Labor
issued a Certification of Eligibility to
Apply for Worker Adjustment
Assistance on January 29, 2010,
applicable to workers of Norgren

VerDate Mar<15>2010

13:41 Apr 29, 2010

Jkt 220001

Automation Solutions, Erie Engineering
and Automation Division, a subsidiary
of Norgren, Inc., Clinton Township,
Michigan. The notice was published in
the Federal Register on March 5, 2010
(75 FR 10320).
At the request of the state, the
Department reviewed the certification
for workers of the subject firm. The
workers produced automation design
and build components.
New information shows that in April
2009 Norgren Automation Solutions
purchased Syron Engineering. Some
workers separated from employment at
the subject firm had their wages
reported under a separated
unemployment insurance (UI) tax
account under the name Syron
Engineering.
Accordingly, the Department is
amending this certification to property
reflect this matter.
The intent of the Department’s
certification is to include all workers of
the subject firm who were adversely
affected by an increase in imports of
automation design and build
components.
The amended notice applicable to
TA–W–72,524 is hereby issued as
follows:
All workers of Norgren Automation
Solutions, including workers whose
unemployment insurance (UI) wages are paid
through Syron Engineering, Erie Engineering
and Automation Division, a subsidiary of
Norgren, Inc., Clinton Township, Michigan,
who became totally or partially separated
from who became totally or partially
separated from employment on or after
October 1, 2008, through January 29, 2012,
and all workers in the group threatened with
total or partial separation from employment
on date of certification through two years
from the date of certification, are eligible to
apply for adjustment assistance under
Chapter 2 of Title II of the Trade Act of 1974,
as amended.
Signed at Washington, DC this 21st day of
April 2010.
Elliott S. Kushner
Certifying Officer, Division of Trade
Adjustment Assistance.
[FR Doc. 2010–9923 Filed 4–29–10; 8:45 am]
BILLING CODE 4510–FN–P

DEPARTMENT OF LABOR
Mine Safety and Health Administration
Petition for Modification
AGENCY: Mine Safety and Health
Administration (MSHA), Labor.
ACTION: Notice of petition for
modification of existing mandatory
safety standard.

PO 00000

Frm 00111

Fmt 4703

Sfmt 4703

SUMMARY: Section 101(c) of the Federal
Mine Safety and Health Act of 1977 and
30 CFR part 44 govern the application,
processing, and disposition of petitions
for modification. This notice is a
summary of a petition for modification
filed by the party listed below to modify
the application of existing mandatory
safety standard published in Title 30 of
the Code of Federal Regulations.
DATES: All comments on the petition
must be received by the Office of
Standards, Regulations and Variances
on or before June 1, 2010.
ADDRESSES: You may submit your
comments, identified by ‘‘docket
number’’ on the subject line, by any of
the following methods:
1. Electronic Mail: StandardsPetitions@dol.gov.
2. Facsimile: 1–202–693–9441.
3. Regular Mail: MSHA, Office of
Standards, Regulations and Variances,
1100 Wilson Boulevard, Room 2350,
Arlington, Virginia 22209–3939,
Attention: Patricia W. Silvey, Director,
Office of Standards, Regulations and
Variances.
4. Hand-Delivery or Courier: MSHA,
Office of Standards, Regulations and
Variances, 1100 Wilson Boulevard,
Room 2350, Arlington, Virginia 22209–
3939, Attention: Patricia W. Silvey,
Director, Office of Standards,
Regulations and Variances.
MSHA will consider only comments
postmarked by the U.S. Postal Service or
proof of delivery from another delivery
service such as UPS or Federal Express
on or before the deadline for comments.
Individuals who submit comments by
hand-delivery are required to check in
at the receptionist desk on the 21st
floor.
Individuals may inspect a copy of the
petition and comments during normal
business hours at the address listed
above.
FOR FURTHER INFORMATION CONTACT:
Barbara Barron, Office of Standards,
Regulations and Variances at 202–693–
9447 (Voice), barron.barbara@dol.gov
(E-mail), or 202–693–9441 (Telefax).
[These are not toll-free numbers].
SUPPLEMENTARY INFORMATION:

I. Background
Section 101(c) of the Federal Mine
Safety and Health Act of 1977 (Mine
Act) allows the mine operator or
representative of miners to file a
petition to modify the application of any
mandatory safety standard to a coal or
other mine if the Secretary determines
that: (1) An alternative method of
achieving the result of such standard
exists which will at all times guarantee
no less than the same measure of

E:\FR\FM\30APN1.SGM

30APN1