National Emission Standards
for Hazardous Air Pollutants: Leather Finishing Operations Residual
Risk and Technology Review (Renewal)
Extension without change of a currently approved collection
No
Regular
02/28/2025
Requested
Previously Approved
36 Months From Approved
02/28/2025
4
4
138
138
0
0
The National Emission Standards for
Hazardous Air Pollutants (NESHAP) for Surface Coating of Metal Coil
(40 CFR Part 63, Subpart SSSS) were promulgated on June 10, 2002,
and most recently amended on February 25, 2020. These regulations
apply to existing facilities and new facilities that are major
sources of hazardous air pollutants (HAP) at which a coil coating
line is operated. A coil coating line is a process in which special
equipment is used to apply an organic coating to the surface of
metal coils; the affected source at each plant site is the
collection of all coil coating lines at the site. The provisions of
this Subpart do not apply to coil coating lines that are part of
research or laboratory equipment or coil coating lines on which at
least 85 percent of the metal coil coated, based on surface area,
is less than 0.15 millimeters (0.006 inches) thick, unless the
coating line is controlled by a common control device. New
facilities include those that commenced construction or
reconstruction after the date of proposal. This information is
being collected to assure compliance with 40 CFR Part 63, Subpart
SSSS.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.