FR 30 Day Notice

Federal Register / Vol. 89, No. 189 / Monday, September 30, 2024 / Notices
Authority: Public Law 91–575, 84
Stat. 1509 et seq., 18 CFR parts 806, 807,
and 808.
Dated: September 25, 2024.
Jason E. Oyler,
General Counsel and Secretary to the
Commission.
[FR Doc. 2024–22344 Filed 9–27–24; 8:45 am]
BILLING CODE 7040–01–P

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
[Docket No. 2020–0752]

Agency Information Collection
Activities: Requests for Comments;
Clearance of Renewed Approval of
Information Collection: Service
Difficulty Report
Federal Aviation
Administration (FAA), DOT.
ACTION: Notice and request for
comments.
AGENCY:

In accordance with the
Paperwork Reduction Act of 1995, FAA
invites public comments about our
intention to request the Office of
Management and Budget (OMB)
approval to renew an information
collection. The Federal Register Notice
with a 60-day comment period soliciting
comments on the following collection of
information was published on July 2,
2024. The collection involves operators
or repair stations report any
malfunctions and defects to the
Administrator. The information
collected allows the FAA to evaluate its
certification standards, maintenance
programs, and regulatory requirements.
It is also the basis for issuance of
Airworthiness Directives designed to
prevent unsafe conditions and
accidents.

SUMMARY:

Written comments should be
submitted by October 30, 2024.
ADDRESSES: Written comments and
recommendations for the proposed
information collection should be sent
within 30 days of publication of this
notice to www.reginfo.gov/public/do/
PRAMain. Find this particular
information collection by selecting
‘‘Currently under 30-day Review—Open
for Public Comments’’ or by using the
search function.
FOR FURTHER INFORMATION CONTACT:
Mark E. Williams by email at:
Mark.E.Williams@FAA.gov; phone:
(816) 329–4042.
SUPPLEMENTARY INFORMATION:
Public Comments Invited: You are
asked to comment on any aspect of this

ddrumheller on DSK120RN23PROD with NOTICES1

DATES:

VerDate Sep<11>2014

17:51 Sep 27, 2024

Jkt 262001

information collection, including (a)
Whether the proposed collection of
information is necessary for FAA’s
performance; (b) the accuracy of the
estimated burden; (c) ways for FAA to
enhance the quality, utility and clarity
of the information collection; and (d)
ways that the burden could be
minimized without reducing the quality
of the collected information.
OMB Control Number: 2120–0663.
Title: Service Difficulty Report.
Form Numbers: 8070–1, 8040–4.
Type of Review: Renewal of an
information collection.
Background: The Federal Register
Notice with a 60-day comment period
soliciting comments on the following
collection of information was published
on July 2, 2024 (89 FR 54951). This
collection affects certificate holders
operating under 14 CFR part 121, 125,
135, and 145 who are required to report
service difficulties and malfunction or
defect reports. The data collected
identifies mechanical failures,
malfunctions, and defects that may be a
hazard to the operation of an aircraft.
The FAA uses this data to identify
trends that may facilitate the early
detection of airworthiness problems.
When defects are reported which are
likely to exist on other products of the
same or similar design, the FAA may
disseminate safety information to a
particular section of the aviation
community.
Respondents: 36,000.
Frequency: Information is collected
on occasion.
Estimated Average Burden per
Response: 5 Minutes.
Estimated Total Annual Burden:
3,000.
Issued in Oklahoma City, OK, on
September 24, 2024.
Andrew Seliga,
Section Manager, Systems Management
Branch/Data Governance & Information
Support Tools, Flight Standards Service,
Office of Aviation Safety, AFS–950.
[FR Doc. 2024–22272 Filed 9–27–24; 8:45 am]
BILLING CODE 4910–13–P

DEPARTMENT OF TRANSPORTATION
Federal Highway Administration
Buy America Waiver Notification
Department of Transportation
(DOT), Federal Highway Administration
(FHWA).
ACTION: Notice.
AGENCY:

This notice provides
information regarding FHWA’s finding
that it is appropriate to grant a Buy

SUMMARY:

PO 00000

Frm 00185

Fmt 4703

Sfmt 4703

79685

America waiver to the Illinois
Department of Transportation (IDOT) for
the procurement of submersible pumps
with non-domestic iron and steel
components. Specifically, this waiver
covers the procurement by IDOT of 4
main, submersible pumps with
discharge capacity of 3,000 gallons per
minute (gpm) each and 2 low flow
submersible pumps with discharge
capacity of 921 gpm each (‘‘waiver
items’’), for the relocation of existing
Pump Station No. 37.
DATES: The applicable date of the waiver
is October 1, 2024.
FOR FURTHER INFORMATION CONTACT: For
questions about this notice, please
contact Mr. Brian Hogge, FHWA Office
of Infrastructure, 202–366–1562, or via
email at Brian.Hogge@dot.gov. For legal
questions, please contact Mr. David
Serody, FHWA Office of the Chief
Counsel, 202–366–1345, or via email at
David.Serody@dot.gov. Office hours for
FHWA are from 8:00 a.m. to 4:30 p.m.,
E.T., Monday through Friday, except
Federal holidays.
SUPPLEMENTARY INFORMATION:
Electronic Access
An electronic copy of this document
may be downloaded from the Federal
Register’s home page at:
www.FederalRegister.gov and the
Government Publishing Office’s
database at: www.GovInfo.gov.
Background
FHWA’s Buy America regulation in
23 CFR 635.410 requires a domestic
manufacturing process for any steel or
iron products (including protective
coatings) that are permanently
incorporated in a Federal-aid
construction project. The FHWA also
applies its Buy America requirements to
predominantly steel and iron
manufactured products and
predominantly steel and iron
components of manufactured products.
This means that for all predominantly
steel or iron materials, products, or
components delivered to a project site
for permanent incorporation into a
highway project using Title 23, U.S.C.
funds, all manufacturing processes,
including application of a coating, must
occur in the United States. FHWA’s Buy
America regulation also provides for a
waiver of the Buy America requirements
when satisfactory quality domestic steel
and iron products are not produced in
the United States in sufficient and
reasonably available quantities.
Background on the Waiver Items:
IDOT requested a Buy America waiver
for 4 main submersible pumps with a
discharge capacity of 3,000 gpm each

E:\FR\FM\30SEN1.SGM

30SEN1