RFS2000 Independent Third Party Batch Verification Report

OMB Control No. ####-####

Expires MM/DD/YYYY

RFS2 Independent Third-Party Batch Verification (Report Form ID: RFS2000): Instructions for Completing

Who must report

• All independent third-party auditors that verify RIN’s as of September 16, 2014.

Reporting requirements

• 40 CFR 80.1451(g)(1) sets forth the additional reporting requirements (available at: http://www.ecfr.gov/cgi-bin/text-idx?SID=354294fee688f6d54979e2638c0decf5&node=se40.17.80_11451&rgn=div8).

• Enter a separate report line for each verified batch.

• Required fields and NA values – Certain report fields or parameters may be specific to select product types. If a report field does not apply to the reported batch, enter the value “NA”. Do not leave the field blank.

Reporting deadlines

• Independent third-party auditors shall report on a quarterly basis:

Production Calendar Quarter	Time Period Covered	Quarterly Report Deadline
Quarter 1	January 1 – March 31	June 1
Quarter 2	April 1 – June 30	September 1
Quarter 3	July 1 – September 30	December 1
Quarter 4	October 1 – December 31	March 31

How to submit reports

• EPA maintains report templates, electronic submission procedures and additional support options at https://www.epa.gov/fuels-registration-reporting-and-compliance-help/reporting-fuel-programs

Field Instructions

Field No.	Field Name	Units	Field Formats, Codes & Special Instructions
1.	Report Form ID		AAAAAA; Character. Enter REPORT FORM ID: RFS2000
2.	Report Type		A; Character. Specify if the data submitted in this report is original or if it is being resubmitted. Submit only one original report; any corrections or updates should be marked as a resubmission. O = Original R = Resubmission
3.	CBI		A; Character. Specify if the data contained within the report is claimed as Confidential Business Information (CBI) under 40 CFR Part 2, subpart B: Y = Confidential Business Information N = Non-Confidential Business Information
4.	Report Date		MM/DD/YYYY; Character. Enter the date the original or resubmitted report is created.
5.	Compliance Period Year		YYYY; Character. Enter the averaging/compliance year the report covers.
6.	Compliance Period Quarter		AA; Character. Enter the quarter under the compliance year this report covers.
7.	Independent Third-Party Auditor Company ID		AAAA; Character. Enter the EPA assigned four-character ID for the independent third-party auditor.
8.	Company ID of Audited Producer		AAAA; Character. Enter the EPA assigned four-character ID for the RIN originator, biointermediate producer, renewable electricity RIN generator, biogas producer or renewable electricity generator company. For imported renewable fuel, this is the company generating RINs on the imported renewable fuel and the four digit ID will not be the same as the renewable fuel producer company ID.
9.	Facility ID of Audited Producer		AAAAA; Character. Enter the EPA-assigned five-character ID or reporting ID for the RIN originator, biointermediate producer, renewable electricity RIN generator, biogas producer or renewable electricity generator facility. For imported renewable fuel, this is the import facility or PADD and will not be the same as the renewable fuel production facility ID. Enter “NA” for all non-imported renewable fuel.
10.	Renewable Fuel Producer Company ID		AAAA; Character. Enter the EPA assigned four-character ID for the renewable fuel producer.
11.	Renewable Fuel Producer Facility ID		AAAAA; Character. Enter the EPA-assigned five-character ID for the renewable fuel production facility.
12.	RIN Year		YYYY; Character. Enter the RIN year of the individual verified renewable fuel batch.
13.	Batch Number		AAAAA…; Character. Enter the batch number assigned by the renewable fuel producer, renewable electricity RIN generator, biogas producer or renewable electricity generator that identifies the verified renewable fuel batch.
14.	Production Date		MM/DD/YYYY; Date. Enter the production date associated with the verified batch.
15.	D-Code		AA; Character. Enter the two-digit D-code of the verified batch. D3: Cellulosic Biofuel D4: Biomass-based diesel D5: Advanced biofuel D6: Renewable Fuel D7: Cellulosic diesel
16.	RIN Quantity		999999999; Number. Enter the total number of RINs associated with the verified batch of renewable fuel.
17.	Verified Batch Total Volume	Gallons	999999999; Number. Enter the total volume of the verified batch of renewable fuel.
18.	Equivalence Value		9.99; Number. Enter the equivalence value used to determine how many gallon-RINs can be generated for the verified renewable fuel.
19.	Denaturant Volume	Gallons	999999999; Number. Enter the total volume of denaturant added to the batch of renewable fuel.
20.	Feedstock or Biointermediate Name (1)		AAAA….; Character. Enter the name of the individual feedstock or biointermediate used in the verified batch. If more than one feedstock or biointermediate type was used, enter each subsequent feedstock or biointermediate name and amounts using fields 23 through fields 34.
21.	Feedstock or Biointermediate Amount (1)		999999999999; Number. Enter the amount of the individual feedstock or biointermediate used in the production of the verified batch.
22.	Feedstock or Biointermediate Unit of Measure (1)		AAAA….; Character. Enter the unit of measure. 10: Cubic Feet 20: 100 Cubic Feet 30: 1,000,000 Cubic Feet 40: Gallon 50: Liter 60: Short Ton 70: Cubic Meters 80: Therm 90: Decatherm 100: Bushel 110: Pounds
23.	Feedstock or Biointermediate Name (2)		AAAA….; Character. Enter the name of the individual feedstock or biointermediate used in the verified batch. If only one feedstock or biointermediate type was used, enter “NA”.
24.	Feedstock or Biointermediate Amount (2)		999999999999; Number. Enter the amount of the individual feedstock or biointermediate used in the production of the verified batch. If only one feedstock or biointermediate type was used, enter “NA”.
25.	Feedstock or Biointermediate Unit of Measure (2)		AAAA….; Character. Enter the unit of measure. If only one feedstock or biointermediate type was used, enter “NA”. 10: Cubic Feet 20: 100 Cubic Feet 30: 1,000,000 Cubic Feet 40: Gallon 50: Liter 60: Short Ton 70: Cubic Meters 80: Therm 90: Decatherm 100: Bushel 110: Pounds
26.	Feedstock or Biointermediate Name (3)		AAAA….; Character. Enter the name of the individual feedstock or biointermediate used in the verified batch. If only two feedstock or biointermediate types were used, enter “NA”.
27.	Feedstock or Biointermediate Amount (3)		999999999999; Number. Enter the amount of the individual feedstock or biointermediate used in the production of the verified batch. If only two feedstock or biointermediate types were used, enter “NA”.
28.	Feedstock or Biointermediate Unit of Measure (3)		AAAA….; Character. Enter the unit of measure. If only two feedstock or biointermediate types were used, enter “NA”. 10: Cubic Feet 20: 100 Cubic Feet 30: 1,000,000 Cubic Feet 40: Gallon 50: Liter 60: Short Ton 70: Cubic Meters 80: Therm 90: Decatherm 100: Bushel 110: Pounds
29.	Feedstock or Biointermediate Name (4)		AAAA….; Character. Enter the name of the individual feedstock or biointermediate used in the verified batch. If only three feedstock or biointermediate types were used, enter “NA”.
30.	Feedstock or Biointermediate Amount (4)		999999999999; Number. Enter the amount of the individual feedstock or biointermediate used in the production of the verified batch. If only three feedstock or biointermediate types were used, enter “NA”.
31.	Feedstock or Biointermediate Unit of Measure (4)		AAAA….; Character. Enter the unit of measure. If only three feedstock or biointermediate types were used, enter “NA”. 10: Cubic Feet 20: 100 Cubic Feet 30: 1,000,000 Cubic Feet 40: Gallon 50: Liter 60: Short Ton 70: Cubic Meters 80: Therm 90: Decatherm 100: Bushel 110: Pounds
32.	Feedstock or Biointermediate Name (5)		AAAA….; Character. Enter the name of the individual feedstock or biointermediate used in the verified batch. If only four feedstock or biointermediate types were used, enter “NA”.
33.	Feedstock or Biointermediate Amount (5)		999999999999; Number. Enter the amount of the individual feedstock or biointermediate used in the production of the verified batch. If only four feedstock or biointermediate types were used, enter “NA”.
34.	Feedstock or Biointermediate Unit of Measure (5)		AAAA….; Character. Enter the unit of measure. If only four feedstock or biointermediate types were used, enter “NA”. 10: Cubic Feet 20: 100 Cubic Feet 30: 1,000,000 Cubic Feet 40: Gallon 50: Liter 60: Short Ton 70: Cubic Meters 80: Therm 90: Decatherm 100: Bushel 110: Pounds
35.	Co-product Name (1)		AAA; Character. Enter the three-digit code of the individual co-product used in the verified batch. If more than one co-product type was used, enter the subsequent co-product name and amount using fields 38 through fields 40. DDG: Dry-Distiller Grain WDG: Wet-Distiller Grain GLY: Glycerin OTH: Other
36.	Co-product Amount (1)		999999999999; Number. Enter the amount of the individual co-product produced with the verified batch.
37.	Co-product Unit of Measure (1)		AAAA….; Character. Enter the unit of measure. 10: Short Ton 20: Pounds
38.	Co-product Name (2)		AAAA….; Character. Enter the name of the individual co-product produced witih the verified batch. If only one co-product type was used, enter “NA”. DDG: Dry-Distiller Grain WDG: Wet-Distiller Grain GLY: Glycerin OTH: Other
39.	Co-product Amount (2)		999999999999; Number. Enter the amount of the individual co-product produced with the verified batch. If only one co-product type was used, enter “NA”.
40.	Co-product Unit of Measure (2)		AAAA….; Character. Enter the unit of measure. If only one co-product type was produced, enter “NA”. 10: Short Ton 20: Pounds
41.	Feedstock or Biointermediate Renewable Biomass Requirement		A; Character. Indicate whether each of the feedstock or biointermediate types used to produce the verified batch met the definition of renewable biomass. Y: Yes N: No
42.	RIN Generation Calculations		A; Character. Indicate whether appropriate RIN generation calculations were followed per §80.1426(f)(3), (4), or (5) for the verified batch. Y: Yes N: No
43.	Feedstock or Biointermediate Supplier Invoice Document Identification		AAAA….; Character. Provide the document identification for any feedstock or biointermediate supplier invoices related to the verified batch. If two or more ID numbers are entered, enclose each number using brackets. If no invoice document identification is available for the verified batch, enter “NA”.
44.	Verified Batch Purchasers Invoice Document Identification		AAAA….; Character. Provide the document identification for any renewable fuel purchaser invoices related to the verified batch. If two or more ID numbers are entered, enclose each number using brackets. If no invoice document identification is available for the verified batch, enter “NA”.
45.	Laboratory Sample Identification		AAAA….; Character. Provide the laboratory sample identification number(s) for any sample from the verified batch analyzed by either an on-site or off-site laboratory. If two or more ID numbers are entered, enclose each number using brackets. If no sample identification numbers are available for the verified batch, enter “NA”.
46.	Comments		AAAA….; Character (1000 character limit). Enter any additional comments.

Paperwork Reduction Act Statement

This collection of information is approved by OMB under the Paperwork Reduction Act, 44 U.S.C. 3501 et seq. (OMB Control No. 2060-xxxx). Responses to this collection of information are mandatory (40 CFR part 80, subpart M. An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The public reporting and recordkeeping burden for this collection of information is estimated to be less than one hour per response. Send comments on the Agency’s need for this information, the accuracy of the provided burden estimates and any suggested methods for minimizing respondent burden to the Regulatory Support Division Director, U.S. Environmental Protection Agency (2821T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.

EPA Form No. 5900-357 Page 14 of 14