HUD-309 HUD Manufactured Home INstallation Certification and Ver

HUD Manufactured Home
Installation Certification
And Verification Report

OMB Approval No. 2502-0578
Expires 07/31/2022

U.S. Department of Housing and Urban Development
Office of Manufactured Housing Programs

The Manufactured Housing Installation Program Regulations 24 CFR Chapter XX Part 3286 Sections 111 and 411 require the licensed installer certify that the
manufactured home has been installed and inspected in accordance with the regulations. The Manufactured Housing Installation Program Regulations 24 CFR
Chapter XX Part 3286 Subpart F requires a qualified inspector verify that the manufactured home has been installed in accordance with the requirements of Part 328
6 and Part 3285. The information collected here will ensure that the licensed installers and qualified inspectors inspect the minimum elements for compliance The
public record burden for the collection of information is estimated to average 1 hour per response including the time to review instructions, search existing data sourc
es, gather and maintain the data needed, and complete and review the collected information. Response to this information is required to certify and verify home insp
ection. This agency may not collect this information, and you are not required to complete this form, unless the form displays a currently valid OMB control number.

Certification Label Number(s)

Manufacturer’s Serial Number(s)

(include all zeros and agency prefix)

(include all letters and numbers)

_____________________________________________________
(Homeowner Name)

_________________________________________
(Installer Name)

_____________________________________
(HUD License No.)

_________________
(State)

_____________________________________________________
(Inspector Name)

_________________
(State)

_________________________________________________________________________________
(Street Address)
(City)
(Zip)

_____________________________________________________
(Street Address)

____________________
(Phone)

1. Initial Inspection
Inspection Item

Inspector Verification Installer Certification

Site location with respect to home design and construction

□ Pass □ Fail
□ Pass □ Fail

□ N/A
□ N/A

□ Pass □ Fail
□ Pass □ Fail

□ N/A
□ N/A

□ Pass □ Fail

□ N/A

□ Pass □ Fail

□ N/A

□ Pass □ Fail
□ Pass □ Fail
□ Pass □ Fail

□ N/A
□ N/A
□ N/A

□ Pass □ Fail
□ Pass □ Fail
□ Pass □ Fail

□ N/A
□ N/A
□ N/A

□ N/A

□ Pass □ Fail

□ N/A

□ N/A
□ N/A
□ N/A

□ Pass □ Fail
□ Pass □ Fail
□ Pass □ Fail

□ N/A
□ N/A
□ N/A

Consideration of site specific conditions
24 CFR 3285 Subpart C - Site preparation and grading for
drainage
24 CFR 3285 Subpart D - Foundation construction
24 CFR 3285 Subpart E - Anchorage

24 CFR 3285 Subpart F - Optional features (Skirting, etc.)
24 CFR 3285 Subpart G - Completion of ductwork, plumbing,
□ Pass □ Fail
and fuel supply systems
24 CFR 3285 Subpart H - Completion of electrical systems
□ Pass □ Fail
24 CFR 3285 Subpart I - Exterior and interior close-up
Completion of operational checks and adjustments

□ Pass □ Fail
□ Pass □ Fail

2. Reinspection of Home (To be completed and initialed by the inspector)
If the inspector discovers that any item during the Initial Inspection fails to comply with the manufacturer’s installation instructions or with an installation
design and instructions that have been certified by a professional engineer or registered architect, the installation must be reinspected after the
installation is corrected.
Briefly describe the work that did not pass the initial inspection. Upon reinspection, inspector must initial item(s) that are in compliance. Attach additional
sheet(s) if necessary.

___________________________________________________________________________________________________________________________________
___________________________________________________________________________________________________________________________________

3. Inspector Verification
I have performed a visual inspection in accordance with 24 CFR § 3286.507, of the manufactured home installation identified above. I have inspected
the minimum elements noted above , as required by 24 CFR § 3286.505 and the items above have been installed in accordance with an installation
design and instructions that have been provided by the manufacturer and approved by the DAPIA or an installation design and instructions that have
been prepared and certified by a professional engineer or registered architect that have been approved by the manufacturer and the DAPIA as providing
a level of protection for residents of the home that equals or exceeds the protection provided by the federal installation standards in part 3285 of this
chapter. It is a crime to knowingly make false statements in any matter within the jurisdiction of the United States such as the verification statement on
this or any similar form. Penalties upon conviction can include a fine and imprisonment. See 18 U.S. Code Section 1001.
_______________________________________________
Inspector Signature

_____________________________
(Date)

4. Installer Certification
I hereby certify, in accordance with 24 CFR §§ 3286.111 and 3286.411, that the manufactured home identified above has been installed in accordance
with an installation design and instructions that have been provided by the manufacturer and approved by the DAPIA or an installation design and
instructions that have been prepared and certified by a professional engineer or registered architect that have been approved by the manufacturer and
the DAPIA as providing a level of protection for residents of the home that equals or exceeds the protection provided by the federal installation standards
in part 3285 of this chapter. It is a crime to knowingly make false statements and/or certifications in any matter within the jurisdiction of the United States
such as the certification on this or any similar form. Penalties upon conviction can include a fine and imprisonment. See 18 U.S. Code Section 1001.
_______________________________________________
Installer Signature

_____________________________
(Date)

Privacy Statement: HUD is committed to protecting the privacy of individuals information stored electronically or in paper form in accordance with
federal privacy laws, guidance and best practices. HUD expects its third-party business-partners who collect, use maintain, or disseminate HUD
information to protect the privacy of that information in accordance with applicable laws.

Distribution: Installer, Retailer, Purchaser
Form HUD - 309