Download:
pdf |
pdf1262147
1.1 Company Name and Address
Instructions
Please enter the mill information below
1262147
A. Mill Name
B. Mill Phone #
Mailing Address:
E. State
C. Street
D. City
G. Mill Website
H. Mill/Company Email
F. Zip Code
I. Parent Company Name (if different from "Mill Name" above)
Parent Company Mailing Address (if different from "Mailing Address" above):
J. Street
K. City
L. State
M. Zip Code
C. State
D. Zip Code
Instructions
1.2 Mill's Physical Address (if different from Mailing Address above)
A. Street
B. City
1.3 Contact Information
Instructions
A. Contact First Name
B. Contact Last Name
D. Contact Phone
C. Contact Title
E. Contact Email
1.4 Mill Type
Instructions
A. Check the box that indicates the type of Roundwood received at the mill for processing. If more than one Mill Type operates
at this site, complete a separate survey for each Mill Type. Refer to Section 3.1 for Products Produced by Mill Type.
Sawmill
Veneer Mill
Industrial Fuelwood
Cabin/House Mill
Pole Mill
Post Mill
Piling Mill
Other/Miscellaneous Mill Type (specify):
1.5 Mill Status
Instructions
A. What was the status of the mill in 2021?
Active
Idle
Closed/Out of Business
Dismantled
B. Did the mill receive any raw material (logs/roundwood) in 2021?
Yes
No
If no, there are no additional questions for you. Please just
return the form in the postage-paid envelope provided.
1.6 Mill Information
Instructions
A. How many employees (full-time equivalents) were
working at the mill in 2021?
B. What is the annual output capacity of finished product
for this mill when it is operating at full capacity?
Please round to a whole number & specify units
Units:
2.1 Total Volume of Roundwood Received in 2021
Instructions
1262147
A. What is the total volume of roundwood received for the "Mill Type" indicated in Section 1.4?
Exclude unprocessed logs or bolts sold/transferred to other domestic primary processing plants or exported out of the country.
Total Volume:
Unit of Measure (check one):
MBF Doyle
BF Doyle
MBF Scribner
BF Scribner
MBF Int'l 1/4 In.
BF Int'l 1/4 In.
MBF Lumber Tally
BF Lumber Tally
B. If Unit of Measure is Green Tons or an "Other"
weight, enter a whole number weight conversion factor
below:
Softwoods
Standard Cord
Lake States Cord (100 in.)
Pieces
Thousand Pieces
Green Tons
Thousand Cubic Ft.
Other (specify below):
lbs. per MBF
OR
lbs. per Cord
Hardwoods
lbs. per MBF
OR
MBF = Thousand Board Feet
BF = Board Feet
lbs. per Cord
2.2 Log Dimensions
Instructions
B. What is the average top diameter (in inches) of wood
received at the mill?
A. What is the average log length (in feet) of wood
received at the mill?
..
..
ft.
2.3
Non-forest
Sources
in 2021
Instructions
A. Do you process any logs from cities or
towns (urban areas) at your mill?
Yes
No
Don't know/Unsure
in.
B. If yes, what percentage of the total roundwood
received was urban wood? Round to a whole percent.
%
2.4 Species of Roundwood Received in 2021
Instructions
A. Enter the volume of roundwood received by species & indicate Unit of Measure for the "Mill Type" checked in Section 1.4.
If providing Percent, calculate based on Total Volume from Section 2.1.
B. Unit of Measure:
Percent (%)
Unit indicated in Sec. 2.1
Amount/Percent of Total Volume
Amount/Percent of Total Volume
Other Unit (specify:)
Amount/Percent of Total Volume
Ash
Fir, balsam
Pine, white
Aspen/balsam poplar
Hemlock
Pine, other
Basswood
Hickory
Spruce
Beech
Maple, hard
Sweetgum
Birch, white
Maple, soft
Sycamore
Birch, yellow
Red Oak Group
Tamarack
Birch, other
White Oak Group
Tupelo/blackgum
Cedar/Juniper
Walnut, black
Cherry, black
Pine, Jack
Pine, longleaf/slash
Cottonwood
Pine, loblolly/shortleaf
Other HWs not listed
Cypress
Pine, ponderosa
Unknown/Undiff. HWs
Elm
Pine, red
Unknown/Undiff. SWs
HWs = Hardwoods, SWs = Softwoods, Undiff. = Undifferentiated.
Yellow-poplar
Other
specify below:
C. What percent of the received roundwood came from the state where the mill is located?
%
c. What percent of the roundwood processed came from other States/Countries? Please list State/Country on line provided.
State/Country 1
State/Country 3
%
State/Country 2
State/Country 4
%
%
%
2.5 Origin of Roundwood Received in 2021
Instructions
A. What was the average procurement radius (in miles) for roundwood received at the mill?
1262147
miles
B. Complete the Species Origin table for the Total Volume reported in Section 2.1.
- Provide County name as heading for columns below. If out of state, please specify State and County, or Country. Add
additional sheets as needed.
- For each species row, percentages (or amounts) across all columns should equal 100% (or the total species volume)
indicated in Section 2.4.
Origin 1
Origin 2
Origin 3
Origin 4
Origin 5
Origin 6
Origin 7
Origin 8
Ash
Aspen/balsam poplar
Basswood
Beech
Birch, white
Birch, yellow
Birch, other
Cedar/Juniper
Cherry, black
Cottonwood
Cypress
Elm
Fir, balsam
Hemlock
Hickory
Maple, hard
Maple, soft
Red oak group
White oak group
Pine, Jack
Pine, loblolly/shortleaf
Pine, longleaf/slash
Pine, ponderosa
Pine, red
Pine, white
Pine, other
Spruce
Sweetgum
Sycamore
Tamarack
Tupelo/blackgum
Walnut, black
Yellow-poplar
Other HWs not listed
Unknown/Undiff. HWs
Unknown/Undiff. SWs
Other (specify below):
Total:
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
100%
2.6
Exported Amounts in 2021
Instructions
A. Did the mill export any unprocessed logs out of the country in 2021?
Yes
No (skip to Section 3.1)
B. If yes, please enter species with associated amount exported, and
indicate Unit of Measure to the right.
Species #1:
Amount #1:
Species #2:
Amount #2:
Species #3:
Amount #3:
Species #4:
Amount #4:
Species #5:
Amount #5:
Species #6:
Amount #6:
1262147
C. Unit of Measure?
Unit of Measure indicated in Sec. 2.1
Other Unit (specify below):
3.1 Products Produced from Logs Received in 2021
Instructions
Enter the percent produced from logs received for the Products below associated with the "Mill Type" checked in Section 1.4 and
for "Other/Miscellaneous" Products produced from logs received, where applicable. The total for each group should equal 100%.
Example: 75% Siding/25% Cants = 100% (Saw Logs), 100% Mulch = 100% (Other/Misc).
Saw Logs
Veneer Logs
Rough/Grade Lumber
Crane Mats
Dimension/Stud Lumber
Lath/Stakes
Molding or Trim
Boxes
Veneer/Face Veneer
Flooring
Pallets/Pallet Lumber
Blocking/Dunnage
Timbers/Supports
Ties (Railroad Ties)
Tight Stave/Cooperage
Landscape Timbers
Other Sawn Products
Bioenergy/Fuelwood
Plywood
Cants
Siding
Furniture Stock
Sheathing
Other Veneer
specify:
House/Cabin Logs
Cabins/House Logs
Sawn House Logs
Turned House Logs
specify:
Hand-Peeled House Logs
Post, Poles, & Pilings
Pellets - Residential Grade
Pilings
Pellets - Torrefied
Poles - Utility
Trussses/Other House Log Prod.
Other House/Cabin Logs
specify:
Other/Miscellaneous Products
Pellets/briquettes - Industrial
Grade
Poles - Other
Mulch, Soil Additives, Compost
Pellets - Other
Residential fuelwood
Posts - Fencing
specify:
Industrial Fuelwood Electricity/Power
Shingles/Shakes
Posts - Other
Industrial Fuelwood
(co-gen, steam, etc.)
Round Railings
Industrial Fuelwood Heat/Steam
Log Furniture
Shavings/Excelsior
Handles/Blanks
Dowels/Blanks
Novelty
Foreign Export Logs
Other Energy Products
specify:
Split Rail Fencing
Other Post, Pole, Piling
Product
specify:
Other
specify:
3.2 Mill Equipment
Instructions
Complete only for the single "Mill Type" checked in Section 1.4
1262147
A. What type of head saw is used at the mill?
Check only the primary head rig
Band Saw
Gang Sawmill
Chip-N-Saw
Other (specify):
Circular Saw
Scragg Sawmill
Portable Band Saw
None
B. What other equipment does the mill have?
Check all that apply
Veneer
Sliced Veneer Equipment
Peeled Veneer Equipment
Other
Chipper
Debarker
Shaving Machine
Wood-Fired Boiler
Other (specify below):
Planer
Dry Kiln
Hammer Mill
Treating Equipment
None
Edger
Post/Pole Peeler
Firewood Processor
Optimizer Equipment
Instructions
3.3 Volume of Product Produced from Raw Material (Logs/Roundwood) Processed
in 2020
Please
enter the amount of finished product produced from the "Mill Type" checked in Section 1.4 by softwoods and hardwoods.
Softwoods
Products
Whole Number Amount
Unit of
Measure
(codes
below)
Percent
Dressed/
Planed
(if sawn
product)
Saw Log
Products
%
Hardwoods
Products
Whole Number Amount
Unit of
Measure
(codes
below)
Percent
Dressed/
Planed
(if sawn
product)
Saw Log
Products
%
Veneer
Log
Products
N/A
Veneer
Log
Products
N/A
House
Logs
N/A
House
Logs
N/A
Industrial
Fuelwood
N/A
Industrial
Fuelwood
N/A
Posts,
Poles, &
Pilings
N/A
Posts,
Poles, &
Pilings
N/A
Other (i.e.
Shavings)
N/A
Other (i.e..
Shavings)
N/A
1 - Lumber Tally (MBF)
Units of Measure
2 - Pieces 3 - Square Feet
4 - Other (specify):
4.1 Disposal of Bark and Wood Residues in 2021
Instructions
1262147
Enter the percent for each type of mill residue by softwoods and hardwoods and how it was disposed of, regardless of
whether it was sold, given away, or paid to dispose. The columns should sum 100%.
Complete only for the single "Mill Type" checked in Section 1.4
- Example:
Hardwood bark - 50% Mulch, 50% Residential fuelwood
Hardwood coarse - 50% Pulp/Paper/Composite products, 50% Residential fuelwood
Hardwood Sawdust - 100% Animal bedding
BARK
Disposal of
Mill Residues
COARSE
(Chips, slabs, edgings,
trims, cores, etc.)
Softwood
%
Hardwood
%
Softwood
%
100%
100%
100%
Hardwood
%
FINE
Shavings
(Planer or Lathe)
Softwood
%
Sawdust
Hardwood
%
Softwood
%
Hardwood
%
100%
100%
100%
Manufacture of pulp/paper/composite
products
Small dimension and other sawn
produccts
Charcoal or chemical wood
Industrial fuel at this plant
Industrial fuel at other locations
Bio-energy pellets
Other bio-energy products (biodiesel,
etc.)
Residential fuelwood
Mulch/soil additives (including
biochar)
Animal bedding
NOT USED (land fill, burned, etc.)
Other/misc. uses (specify below):
100%
100%
Column Totals
4.2 Volume of Hog Fuel/Industrial Fuelwood Received in 2021
Instructions
A. Did you receive any roundwood, in-woods chips, whole tree chips, or logging residues (not mill residues) at the mill that were
used for hog fuel, heat, power, or dry kilns?
Complete only for the single "Mill Type" checked in Section 1.4
Yes
No
B. If yes, enter amount by softwood & hardwood by origin. Indicate Unit of Measure of any roundwood, in-woods chips, whole
tree chips, or logging residues that the mill received for hog fuel, heat, power, or dry kilns, at the mill.
State or
foreign
Country of
Origin
Boiler/Hog Fuel Volume
Softwood
Enter amount in boxes below
Hardwood
Enter amount in boxes below
Unit of Measure
Check one
Green Tons
Thousand Cu. Ft.
Dry Tons
Other (Specify):
5.1 Directory Inclusion & Results
Instructions
1262147
A. Would you like to omit the mill contact information from Regional/Statewide Industry Directories?
(This will not remove you from the list of mills that may be surveyed in the future)
Yes
No
B. Would you like to receive a copy of the report resulting from this survey?
Yes
No
C. If yes, what is the best way for us to get the results to you?
Mailing address provided in Section 1.1
Different address (specify):
Email (specify):
Notes and Comments
Instructions
Please use the box below to record any information about the mill that may be helpful for interpreting
your responses. Also, please use this space to add comments on any questions/sections that needed more
instructions or were confusing, or if you have any suggestions on improving this questionnaire.
Thank you for participating in this survey!
Please return the questionnaire in the postage-paid envelope provided.
File Type | application/pdf |
File Title | TPO_EPDF_2021_TrialXXX_Activated (1262147 - Activated, Traditional) |
Author | iankennedy |
File Modified | 2021-09-23 |
File Created | 2021-09-23 |