P4-07_Phase_4_Participant_Guidelines

The Redistricting Data Program

P4-07_Phase_4_Participant_Guidelines

OMB: 0607-0988

Document [pdf]
Download: pdf | pdf
OMB Control # 0607-0988

2020 Census Redistricting Data Program, Phase 4
Collection of Post-2020 Census Redistricting Plans
Participant Instructions
During Phase 4, as official redistricting data program liaisons designated by the legislative
leadership in your state, the District of Columbia, and Puerto Rico, you have the opportunity to
submit any newly drawn congressional, state legislative, or legislative (DC, PR) district plans to
the Census Bureau. You will also be provided an opportunity to ensure that the Census Bureau
has correctly inserted those plans into our geographic database. We recognize that many of
these plans have not yet been enacted. With that in mind, we have an extended submission
window to capture these updated plans once they have become enacted.
Paperwork Reduction Project
We estimate that the Collection of Post-2020 Census Redistricting Plans will take a total of 8
hours on average per participant. Send comments regarding this burden estimate or any other
aspect of this collection of information, including suggestions for reducing this burden, to
rdo@census.gov. This collection has been approved by the Office of Management and Budget
(OMB). The eight-digit OMB approval number that appears at the upper right of this document
confirms this approval. If this number were not displayed, we could not conduct this survey.
This collection is voluntary. The Census Bureau conducts this program under the legal authority
of the Title 13 United States Code (U.S.C.), Sections 16, 141, and 193. The Census Bureau issued
a Federal Register Notice to revise its confidentiality pledge language to address the new
cybersecurity screening requirements: Per the Federal Cybersecurity Enhancement Act of 2015,
your data are protected from cybersecurity risks through screening of the systems that transmit
your data.
Phase 4 Timeline
Item
States Receive Phase 4 invitation
States Submit CD/SLD Plans to Census Bureau
Status Submit CD/SLD Verification Updates to Census Bureau
Release CD/SLD products to the Census Website

Timing
January 2022
January 2022 – July 25, 2022
June 28 – Sept 21, 2022
Nov 2022 – March 2023

1

OMB Control # 0607-0988

Phase 4 - Submission Materials
1. Block Equivalency File (Required)
2. Population Totals (Required)
3. State legislation documenting your post-2020 Census boundaries (Required)
4. Split Blocks (if applicable)
5. SLD Names (if applicable, if names are not provided district number becomes the name)
6. Relationships between SLDL, SLDU, or CD boundaries and other geographic boundaries (if
applicable)
7. Check List (Optional)
1. A block equivalency file (BEF) representing Congressional Districts (CDs) and State
Legislative Districts (SLDs) by whole 2020 Census blocks
•
•
•

A separate file is required for each entity type; one for CDs and one for SLDs.
Include the state name or abbreviation and either CD118 or SLD22 in
the file name. For example; CD118_MD.txt or SLD22_VA.txt.
All files must be in comma delimited text format, zero filled, and
formatted as follows.

NOTE: These files should contain a record for every 2020 census tabulation block in
your state, including all water blocks. If water blocks are not assigned, they will be
given a “ZZ” code for unassigned congressional districts and a “ZZZ” code for
unassigned state legislative districts.

Congressional District Files
Field Name
State FIPS code
County FIPS code
Census Tract
Census Block
Congressional District code

Length
2
3
6
4
2

Type
String
String
String
String
String

Description
FIPS State Code
FIPS County Code
Census Tract Code
Tabulation Block Number
Congressional District Code

Example: 09,013,020192,3005,01
State FIPS
code
09

County FIPS
code
013

Census Tract
code
020192

Census Block
code
3005

Congressional
District code
01

2

OMB Control # 0607-0988

State Legislative District Files
Field Name
Length
Type
Description
State FIPS code
2
String
FIPS State Code
County FIPS code
3
String
FIPS County Code
Census Tract
6
String
Census Tract Code
Census Block
4
String
Tabulation Block Number
Senate District (upper chamber) code
3
String
SLD Upper Chamber Code
(SLDU)
House District (lower chamber) code (SLDL)
3
String
SLD Lower Chamber Code
Example: 09,013,020102,3005,011,003
State FIPS
code
09

County FIPS
code
013

Census Tract

Census Block

SLDU

SLDL

020102

3005

011

003

2. Population Totals – To assist us in verifying the accuracy of the boundaries that we
have inserted into our geographic database, please provide:
• A list of the official 2020 Census population totals identified by your state for
each CD, SLDU, and SLDL (if applicable).
• A list of the counties or county equivalents in your state that are split by a CD,
SLDL, or SLDU boundary (if applicable) and the 2020 Census population
associated with each district’s part in those counties.
3. State legislation documenting your post-2020 Census boundaries.
4. Split Blocks - If your state CD and SLD boundaries DO NOT follow 2020 Census blocks,
see Appendix A. You will need to submit the block equivalency file (BEF), a separate list
of block splits, and block split shapefiles that you create using the Geographic Update
Partnership Software (GUPS).
5. SLD Names – You may also submit state legislative district names at this time. We
request two separate files for this purpose, one for house (SLDL) names (if applicable) and
one for senate (SLDU) names. All files should be in comma delimited text format. Include
the state name or abbreviation and either “house” or “senate” in the file name. For
example: “IL_senate_names.txt”. The format of these files is as follows:

3

OMB Control # 0607-0988

SLD Names Files
Field Name
State code
SLDU or SLDL code
SLDU or SLDL name
State Code
17

Length
Type
Description
2
String
FIPS State Code
3
String
SLD Upper/SLD Lower Chamber Code
60 (maximum)
String
SLD Upper/SLD Lower Chamber Name
Example: 17,006,State Senate District 6
SLDU or SLDL code
006

SLDU or SLDL name
State Senate District 6

6. Relationships between SLD and CD boundaries and other geographic boundaries
As we update our databases with your state’s congressional, senate, and house districts,
we will discover many situations where other boundaries have changed since the 2020
Census. These changes will not be reflected in the 2020 Census data we tabulate for the
new plans that you submit under this project.
However, as we move forward throughout the decade, we will need to know how to
manage any permanent relationships that the CDs and SLDs have to other governmental
unit boundaries such as incorporated places and county subdivisions. Providing us with
this information will help us maintain your boundaries.
If your CDs and/or SLDs have relationships to other governmental boundaries, please fill
out the document Appendix C. “Update and Maintenance of Congressional and State
Legislative District Boundaries Coincident to Other Geographic Entities”. If we do not
receive any relationship information from you we will hold your plans to their block
definition throughout the decade.
7. An optional Check List is provided as a tool to help ensure that you have provided
all the information we need, and so that we can check that we have received all the
information you intended to submit. The Check List is available in Appendix D, or on our
website at: https://www.census.gov/programs-surveys/decennialcensus/about/rdo/program-management.html
Submitting Materials
We are using the Secure Web Incoming Module (SWIM) to accept both whole block and split
block submissions. For more information, refer to Appendix B. File Submission Via the Secure
Web Incoming Module (SWIM)

4

OMB Control # 0607-0988

Appendix A: Using GUPS to Create your Block Split Shapefile
A. Introduction
GUPS should only be used if your Congressional District (CD) or State Legislative District Upper
or Lower (SLDU/SLDL) boundaries split census blocks. We are using the BBSP module of GUPS to
facilitate the capture of blocks splits when they are part of a state’s redistricting plan. The file
you create in GUPS must be included with the whole block BEF (Block Equivalency File) and the
split block list to create a complete submission to the Census Bureau.
Even though we are accepting block splits via GUPS, we cannot accept any other geographic
updates, such as block boundary suggestions, additional linear feature updates (beyond those
needed for your block splits), Boundary and Annexation Survey (BAS) updates, or Voting District
Updates.
This process will be completed on a county basis (referred to as a project). Additionally, it must
be repeated for each layer: CD, SLDU, and SLDL where applicable in the same project. Once an
edge is flagged as a block split, it cannot be flagged again. For example, if you need a block split
that serves as a boundary for the CD, SLDU, and SLDL. Once you create the block split for the
CD, it will serve as the block split for the SLDU and SLDL. However, you will have to import the
SLDU and SLDL BEFs and manually adjust the SLDU and SLDL area feature to match the new
boundary.
B. Suggested Workflow Summary
There is no specific CD/SLD Update Program listed in GUPS. We will be accepting updates for
the 118th CDs through the current program which is the Block Boundary Suggestion Project.
B.0. Install GUPS
B.1. Start a Project: Open State/County in GUPS. Block splits are created on a county
basis and we are unable to accept a state level CD/SLD shapefile with block splits at this
time.
B.2. Bring in your CD/SLDs: In GUPS, BEFs are called tabular equivalency files (TEF)s.
Import your BEF using the Import Working File tool. This tool conflates your BEF to 2020
Census blocks in TIGER. Once the BEF is imported, you can review the CDs or SLDs and
make the block splits and spatial adjustments. A statewide BEF can be supplied to the
import tool, and GUPS will extract the county that you are working in.
B.3. Create block splits: Use the linear feature tool (if needed) and block boundary
flagging tool to create the block splits.
5

OMB Control # 0607-0988

B.4. Review Block Splits: Review your block splits to ensure that they align with CD/SLD
boundaries.
B.5. Adjust CD/SLDs to match block splits: Use the Modify Area Feature Tool to adjust
CDs or SLDs to the block splits. The Census Redistricting & Voting Rights Data Office
(CRVRDO) will be reviewing these areas and will reach out if they do not align.
B.6. Repeat process (Steps 2-5) for other layers (CD/SLDL/SLDU) within the same
county (if applicable)
B.7. Run Quality Control Check: Run the Criteria Review Tool to ensure that the CDs and
SLDs are wall-to-wall within the county and validate any discontiguous districts (within
your working county).
B.8. Export Project for Submission
C. Suggested Workflow Detailed
This detailed workflow outlines the procedures for creating block splits, if needed, for
submission as part of your plan. Additional information on GUPS functionality is often referred
to in these instructions and can be found in the Voting District Verification II Project GUPS
User’s Guide located at https://www2.census.gov/programssurveys/decennial/rdo/about/2020-censusprogram/Phase2/VTDV2/VTD_Verification_ParticipantMaterials.zip
C.0. Install GUPS
You must use the most current GUPS Version as it includes all the functionality needed
for making the CD/SLD updates. It is available for download at

If you are having issues installing GUPS, please contact our office at 301-763-4039 or
rdo@census.gov.
C.1. Start a Project
1. Select Block Boundary Suggestion Project, then your State, and County
2. When prompted to Select Data Folder, Directory, or Location, we recommend
that you select Census Web. This will automatically download the partnership
shapefiles required for your submission into the project.

6

OMB Control # 0607-0988

3. As GUPS loads the data, it unzips and copies the files to a folder that was created
on your computer’s home directory (i.e.,
C:/Users//GUPSGIS/gupsdata/BBSP/shape, where  is the
year of the program) during the installation process. It then pulls the shapefiles
into the GUPS.
For more information, refer to Table 6. How to Start a GUPS Project (pg. 24).

4. Change the symbology from BBSP to VTD. This will shift the symbology from
block boundaries to features such as roads, rivers, and rails as well as the CD/SLD
Block Splits using the Switch To Tool
C.3. Bring in your CD/SLDs via the Import Working File

This tool allows you to import a BEF or shapefile into your GUPS project. Once you
import the file, it will be become the active CD, SLDU, or SLDL layer that you can edit
and will be submitted. It will replace the current CD, SLDU, or SLDL layer and cannot be
undone. This tool also lets you replace the active layer to restart the project if needed.
The BEF can be used for inserting the CDs and SLDs, a Shapefile of the CDs and SLDs is
not required.
This process must be repeated for each layer: CD, SLDU, and SLDL (where applicable).
1. Select Import Working File
2. Select Import Tabular Equivalency File (TEF)
3. Map the fields in your BEF to the fields in GUPS
4. GUPS will conflate the BEF to the MAF/TIGER blocks. This may take a few
minutes.

7

OMB Control # 0607-0988

5. For more information refer to Table 20: Import Tabular Equivalency File (pg. 52).
6. Optional: Adding a Shapefile (Vector Data): This tool allows you to bring a
shapefile into the project that can be used as a reference to determine which
areas need to be split. Using Add Vector Layer does not bring the shapefile into
the project as an editable layer.
For more information refer to Table 13: Adding a Shapefile (Vector Data) (pg.
37).
C. 4. Create block splits
Use the Feature Flagging Tool to flag either existing or new edges as block splits.
1. Navigate to the edge that you need to flag.
2. Select the Feature Flagging Tool and then click on the edge.

3. Under actions, select CD/SLD Block Split. This assigns a value of BBSP_2020=S to
the edge and will now have a green dashed line.
4. If you need to remove the block split, select the Feature Flagging Tool, select the
edge, and then select NULL under Actions. This will remove the value from the edge,
and it will not be held as a CD/SLD Block Split.

8

OMB Control # 0607-0988

Optional: Add Linear Features: If you need to add an edge to create your block
split this tool allows you to digitize the edge that you need to use as the block
split. It is important to note, there may be an existing edge in MAF/TIGER which
is not a block boundary but can be used to split the block, rather than digitizing a
new edge. We ask that you do not digitize edges within 7.5 meters of an existing
edge that can be used. If you do add edges, you will have to adjust the CD/SLDs
to match the new edges.
For more information on how to add a linear feature, refer to Table 29: Adding a
Linear Feature (pg. 76).
C.5. Review Block Splits
Use Review Block Boundary Tool to review your block splits.

1. Select the Review Block Boundary Tool and Select CD/SLD from the Category
dropdown menu. This will list all the block splits applied within the county. It is
important to ensure that the block splits and the CD/SLD boundaries align.
2. Use the arrows to navigate through the list. Selecting on Verify Split, will remove
the edge from the window until you reopen the tool and is not a necessary step.
Selecting Null will remove the CD/SLD Block Split.
3. Ensure for each block split that it is in the correct location and the appropriate
CD and SLD boundaries match the split.

9

OMB Control # 0607-0988

C.6. Adjust CDs/SLDs to match block splits

If you need to adjust the CD/SLD boundary to match the block split, especially if you
added a new edge, you will need to adjust the CD/SLD Area features themselves using
the Modify Area Feature Tool.
1. Open the Modify Area Feature Tool
2. Select the Geography from the drop-down menu
3. Select the CD/SLD to modify
10

OMB Control # 0607-0988

4. Select the face(s) on the map that you want to add to the CD/SLD to match the
new boundary
5. Select the Add Area button
6. The faces have been added to the CD/SLD
7. Repeat the process as needed
For more information on how to edit area features, refer to Table 23: Using the Modify
Area Feature Tool to Update Area Features (pg. 59)
C.7. Repeat process for other layers (if applicable)
C.8. Run Quality Control Check

When you have completed your updates for all the CDs/SLDs in the county, you will
need to run the Criteria Review Tool which will ensure that all faces within the county
have CD/SLD coverage and alert you to any discontiguous CDs or SLDs. If a face is
unassigned, it will need to be fixed before you can export your file. Discontiguous CDs or
SLDs are just an alert and do not require to be fixed before export.
C.9. Export Project for Submission

When you are ready to export your shapefiles, use the Export Tool and select “Export
for Census”. This will create the required shapefiles that are needed for processing the
CD/SLD Block Splits.

11

OMB Control # 0607-0988

Appendix B: File Submission via the Secure Web Incoming Module (SWIM)
SWIM is a tool for U.S. Census Bureau partners to send their geospatial data to a Census Bureau
server. For security reasons, we cannot accept files sent via email or through our former FTP
site. Note that SWIM cannot accept files larger than 250MB or zip files that contain additional
zip files within them. SWIM supports the current and last previous versions of Internet Explorer,
Microsoft Edge, Google Chrome, Mozilla Firefox and Apple Safari browsers.
To establish a SWIM account, the Census Bureau must first provide a user a registration token,
which is a unique, single-use 12-digit number associated to an individual. Every user must have
a unique token in order to register. Once the token has been used to establish your account, it
is no longer required to access your account.
If you have submitted files for BBSP, BBSPV, VTD, VTDV, and/or VTDV2 use the same SWIM
account. To access the SWIM, enter the following URL in a new browser window:
https://respond.census.gov/swim. Follow the directions below for account access and file
upload.
If you do not yet have a SWIM Account:
• Click the Register Account button, which directs you to the Account Registration page,
shown in the figure below.
• Enter the 12-digit Registration Token number provided to you by the Census Bureau. If
you do not have a token, contact the CRVRDO at 301-763-4039 or rdo@census.gov.
• Complete all other fields. Note that email addresses are case sensitive, but passwords
and security question answers are not.
• Click the Submit button.
1. After logging in, choose “Start New Upload”
2. Select Redistricting Data Program- CD-SLD (RDP)

12

3. Select the state

OMB Control # 0607-0988

4. To submit files to SWIM, they must be in a zip file.
Mandatory for all participants: For the statewide plan and its documentation, please
zip your files (1. Block Equivalency File (Required), Population Totals (Required), State
legislation documenting your post-2020 Census boundaries (Required), SLD Names (if
applicable), Relationships between SLDs or CD boundaries and other geographic
boundaries (if applicable), and Checklist (Optional) files into a file named
cdsld22_ssccc_return.
Mandatory if you have Split Block GUPS Files: If you have not moved the GUPS
export, it will be located at GUPSGIS\gupsdata\BBSP22\
bbsp22_ssccc_return.zip. If you made updates for several counties, you will see and
can select several counties to upload at one time from this location.
It is very important that if you have split block zip files from GUPS that they ARE NOT
added to the cdsld22_ssccc_return zip file as SWIM cannot process zip files within zip
files.
5.

Click Next

The “Thank You” page confirms the receipt of your file submission. If you do not have any
additional files to upload, click on Log Out.
If you are having issues with SWIM, please contact our office at 301-763-4039 or
rdo@census.gov

13

OMB Control # 0607-0988

Appendix C: Update and Maintenance of Congressional and State Legislative
District Boundaries Coincident to Other Geographic Entities
As we move forward throughout the decade, we will need to know how to manage any
permanent relationships that your congressional districts (CDs) and state legislative districts
(SLDs) have to other governmental unit boundaries, such as incorporated places and minor civil
divisions (MCDs). If your CDs or SLDs currently share boundaries with incorporated places or
MCDs, we request that you tell us if you would like the Census Bureau to maintain those
relationships by moving the CD or SLD boundary when the place or MCD boundaries move, so
that they will continue to share the boundary.
There are two main reasons why the Census Bureau moves MCD and incorporated place
boundaries:
Drafting Correction: A boundary is moved slightly to a more spatially accurate location.
Legal Annexation: This is a legal boundary change. These often include housing units and
population.
For your reference, graphic examples can be found at the end of this document.
Currently, if a CD or SLD boundary is following a Minor Civil Division (MCD) or incorporated
place boundary, and the MCD or incorporated place boundary is 1) moved due to a drafting
correction, and 2) it is not on a physical feature such as a road or river, the Census Bureau
moves the CD or SLD boundary so it will continue to follow the MCD or place boundary. Please
indicate in the tables below, how you would like the Census Bureau to handle these situations
in the future.

14

OMB Control # 0607-0988

Congressional Districts
 County Subdivisions and Congressional Districts (CD)
If the CD is following a county subdivision (MCD) boundary and the MCD boundary moves due to a:
Drafting
Legal
Move CD boundary to new MCD boundary
Correction
Annexation
Yes
No

 Incorporated Place and Congressional Districts (CD)
If the CD is following an incorporated place boundary and the place boundary moves due to a:
Drafting
Legal
Move CD boundary to new place boundary
Correction
Annexation
Yes
No

15

OMB Control # 0607-0988

State Legislative Districts (Upper)
 County Subdivisions and State Legislative Districts Upper (SLDU)
If the SLDU is following a county subdivision (MCD) boundary and the MCD boundary moves due to a:
Drafting
Legal
Move SLDU boundary to new MCD boundary Correction
Annexation
Yes
No

 Incorporated Places and State Legislative Districts Upper (SLDU)
If the SLDU is following an incorporated place boundary and the place boundary moves due to a:
Drafting
Legal
Move SLDU boundary to new place boundary Correction
Annexation
Yes
No

State Legislative Districts (Lower)
 County Subdivisions and State Legislative Districts Lower (SLDL)
If the SLDL is following a county subdivision (MCD) boundary and the MCD boundary moves due to a:
Drafting
Legal
Move SLDL boundary to new MCD boundary Correction
Annexation
Yes
No

 Incorporated Places and State Legislative Districts Lower (SLDL)
If the SLDL is following an incorporated place boundary and the place boundary moves due to a:
Drafting
Legal
Move SLDL boundary to new place boundary Correction
Annexation
Yes
No

16

OMB Control # 0607-0988

Additional Congressional District Relationships
Yes

No

Comments

Places nest within
Congressional Districts
Other Relationship (enter in
Comments)

Additional State Legislative District Relationships
Yes No

N/A Comments

SLDLs are coextensive with
SLDUs
SLDLs nest within SLDUs
Places nest within SLDL
Places nest within SLDU
MCDs nest within SLDL
MCDs nest within SLDU
SLDLs and SLDUs are the
same
Other SLDL Relationship
(enter in
Comments)
Other SLDU Relationship
(enter in
Comments)

17

OMB Control # 0607-0988

Legal Boundary Change Example

18

OMB Control # 0607-0988

Boundary Correction Example

19

OMB Control # 0607-0988

Appendix D: Check List
 Block equivalency files (BEF)
CD
SLDU and SLDL
SLDU only

 Population totals
CD
SLDU
SLDL

 Names

SLDU Names
SLDL Names

 State legislation
CD
SLDU
SLDL

 Form
Filled out the Appendix C: Update and Maintenance of Congressional and State Legislative District Boundaries
Coincident to Other Geographic Entities
N/A

If any 2020 Census blocks contain more than one CD or SLD (split blocks), submit via GUPS
for the following geographies:
 GUPS Submission
CD
SLDU
SLDL

 Listing of split blocks
CD
SLDU
SLDL

20


File Typeapplication/pdf
Authorzorn0001
File Modified2021-11-10
File Created2021-11-10

© 2024 OMB.report | Privacy Policy