Download:
docx |
pdf
Notice
regarding Section 508 of the Workforce Investment Act of 1998:
Section 508 of the Workforce Investment Act of 1998 requires that all
U.S. Federal Agencies make their web sites fully accessible to
individuals with disabilities. See 29 U.S.C. §794d. While the
Trademark Electronic Application System (TEAS) forms do comply with
Section 508, the PDF preview of the TEAS forms currently do not meet
all standards for web accessibility. If you cannot access a TEAS form
preview or have any questions about this notice, please contact the
Trademark Assistance Center (TAC) at 1-800-786-9199 (select
option#1), Monday-Friday, 8:30 a.m. to 8 p.m., ET.
PTO-2303
Approved
for use through XX/XX/XXXX. OMB 0651-0061
U.S.
Patent and Trademark Office; U.S. DEPARTMENT OF
COMMERCE
Under the Paperwork Reduction Act of 1995,
no persons are required to respond to a collection of
information unless it contains a valid OMB control number
|
|
|
Letter of Protest
|
TEAS
- Version 7.6
|
|
GENERAL
FORM INFORMATION:
TIMEOUT
WARNING: You're
required to log back in after 30 minutes of inactivity.
This ensures the USPTO complies with mandatory
federal information security standards and
protects user information. After 25 minutes of inactivity,
you will be prompted to continue your session. If you do
not continue within 5 minutes, the session will end, you
will be logged out of your USPTO.gov account, and you will
lose any unsaved data in the form. Please have all of your
information ready before you start.
DO
NOT USE YOUR BROWSER BACK/FORWARD BUTTONS: Use
only the navigation buttons at the bottom of each page.
TIPS
ON USING THIS FORM MOST EFFECTIVELY: Click
here or
on any underlined word for additional information.
REQUIRED
FIELDS: All
have an ASTERISK (*),
and the form will not validate if these fields are not
filled-out.
|
|
i
|
IMPORTANT: After
this petition is submitted, the USPTO will send a filing
receipt to the email address of the
petitioner.
CONTACT:
For general
trademark information or help navigating the forms,
email TrademarkAssistanceCenter@uspto.gov,
or telephone 1-800-786-9199 (press 1).
If you
need help resolving technical
glitches,
email TEAS@uspto.gov.
Please include in your email your phone number, serial or
registration number, and a screenshot of any error message
you may have received.
STATUS
CHECKS: The
status of the filing is available in the Trademark
Status & Document Retrieval System (TSDR) 72
hours after filing.
|
|
FOLLOW
THE STEPS BELOW TO ACCESS THE LETTER OF PROTEST FORM:
STEP
1: CHECK
STATUS.
The
USPTO will accept a letter of protest filed before
publication in all cases where it is determined that the
evidence is relevant and supports any reasonable ground for
refusal appropriate in ex parte examination. When a letter
of protest is filed on the date of publication or within 30
days after the date of publication, the letter of protest
will be accepted only where publication of the mark
constituted clear error. Letters of protest filed more than
30 days after publication are generally denied as
untimely. Confirm
the status of the application before
proceeding. If the application is not in the correct status,
you will receive an error message when you click the
"Continue" button.
|
|
STEP
2: ENTER
THE U.S. APPLICATION SERIAL NUMBER BEING PROTESTED BELOW OR ACCESS
PREVIOUSLY FILLED-OUT/SAVED FORM.
|
|
|
|
Mark
|
|
The
1st Owner/Holder Information
|
Email
Address:
|
The
2nd Owner/Holder Information
|
Email
Address:
|
Attorney
Information
|
Email
Address:
|
Publication
Date
|
|
|
1.
Do you need to file a letter of protest? Identify the legal
basis below.
|
NOTE: Prior
use of the mark, a dispute over ownership of mark, or issues
of fraud are NOT an appropriate legal basis for filing a
letter of protest and will result in the denial of the
letter of protest.
|
Check
the appropriate box(es) to answer YES to this question. More
than one option can be selected:
|
|
Mark
is likely to cause confusion with an existing U.S.
Trademark Registration or prior pending application or
application with an earlier effective filing date or
priority claim. Enter U.S. Registration Number(s)/Serial
Number(s) in the text box. The protestor should not
identify more than the five most relevant registrations
or applications that could form a basis for refusal. If
the protestor identifies more than five registrations or
applications, only the first five identified
registrations or applications will be
considered.
Registration/Serial
Number(s) must be separated by commas and without
additional punctuation (e.g. "324xxxx, 572xxxx,
90xxxxxx, 79xxxxxx, 88xxxxxx").
|
|
Mark
is generic.
|
|
Mark
is merely descriptive or misdescriptive, or should have
an element disclaimed on that basis.
|
|
Mark
is primarily geographically descriptive or
misdescriptive, or should have an element disclaimed on
that basis.
|
|
Mark
is involved in pending litigation that involves a
federally registered mark or prior pending application.
Remedy requested in court proceeding includes
cancellation, abandonment or amendment of the protested
application. Copy of the relevant pleading is attached in
the evidence section.
|
|
Previously
registered mark is being used inappropriately in the
identification of goods/services. Enter U.S. Registration
Number in text box. Identify the registered mark and
exactly where in the identification of goods/service it
is being used in the description of the evidence section
on the next screen.
|
|
Other
Legal Basis. Explanation of legal basis.
|
|
|
2.
Do you need to request a copy of a previously filed Letter
of Protest?
|
Tip: If
answering YES to this question, leave the checkboxes, above,
unchecked.
|
Yes
No
|
|
|
EVIDENCE
You must attach
evidence to support the legal grounds for refusal of
registration. To maintain the integrity of the ex parte
examination process, evidence should never identify the
protestor or its representatives or contain any arguments or
persuasive language. The evidence must be objective,
independent, and factual and not consist of links to websites
but include copies of the actual webpages.
An
index is required for all letters of protest unless the ground
is likelihood of confusion and the goods/services are
identical. The index should be on a separate page and not
appear on letterhead, identify the protestor, or include legal
arguments or persuasive language. The submitted evidence must
not include more than 10 items per ground and may not exceed 75
total pages or the letter of protest will not be considered.
If
the protest is based on a likelihood of confusion with a U.S.
Registration(s) or prior pending application(s), provide an
electronic copy of the registration/application file from the
USPTO TESS or TSDR databases showing the current status and
owner; providing the registration or serial number is not
sufficient. Do not identify more than five of the most relevant
U.S. Registrations or serial numbers. If more than five
registrations or serial numbers are provided, only the first
five registrations or applications will be considered. If the
goods/services are not identical, evidence of the relatedness
of the goods/services must be attached or the letter of protest
will not be considered.
If
the legal basis for your letter of protest is that a previously
registered mark is being used inappropriately in the protested
application's identification of goods/services (ID), please
identify the U.S. Registration number of the previously
registered mark in the Legal Basis section of this form and, in
the text entry box below, indicate the mark that appears in the
protested application's ID and exactly where in the ID it is
being used. You may also suggest an appropriate generic term
that should be used instead of the registered mark.
|
Evidence
|
Evidence
File
Click
on the 'Browse' button to select a JPG/PDF
file that
contains the information from your local drive.
WARNING:
The file size cannot exceed 5 megabytes per attachment for JPG
or 30 megabytes per attachment for PDF. You must include
information about your letter of protest.
Describe
what the evidence submitted consists of:
|
|
Protestor
and Correspondence Information
|
* Name
of Protestor
|
|
* Correspondent
Name
for Letter of Protest
|
|
Correspondent
Law Firm
(if
applicable)
|
|
* Street
Address
|
NOTE: You
must limit your entry here, and for all remaining fields within
this overall section (except City, see below), to no more than
40 characters (the storage limit for the USPTO database). You
may need to abbreviate some words, e.g., St. instead of Street.
Failure to do so may result in an undeliverable address, due to
truncation at the 40 character limit.
|
Suite/Apartment
No
|
|
* City
|
NOTE: You
must limit your entry here to no more than 22 characters.
|
* State
(Required
for U.S. addresses)
|
NOTE: You
must include as part of the "City" entry any
information related to geographical regions (e.g., provinces)
not found in the dropdown lists for "States" or
"Countries." Enter the city and then the geographical
region, separated by a comma (e.g., Toronto, Ontario). In most
instances, you will then also have to select the country within
which the region is found, below.
|
* Country/Region/Jurisdiction/U.S.
Territory
|
|
* Zip/Postal
Code
(Required
for U.S. and certain international addresses)
|
|
Phone
Number
|
|
Fax
Number
|
|
*Email
Address
|
The
USPTO will issue a decision on your letter of protest by email.
|
|
|
|
|
Text
Form for Handwritten Signature Scanning
|
This
option uses a Text
Form (available
after clicking on the Validate button) that will be signed by
the proper signatory(ies) in the traditional "pen-and-ink"
manner. Or, if you already have a signed statement for this
letter of protest, you can attach it directly here, rather than
relying on the USPTO's text form version. NOTE: If
you are using the Text Form approach, you must after validation
save the letter of protest data, and then pull up the saved
form to attach the scanned file for final submission.
Click
on the Browse/Choose
File button
to select file that contains the scanned signature from your
local drive. The scanned file should only include
the appropriate signature information (signature, signatory's
name, signatory's position, and signature date).
|
NOTE: If
necessary, the actual signatory may complete the following
fields directly on the Text Form, if you do not know who will
be signing the form. If left blank, you will initially receive
a WARNING message, which you can by-pass by clicking the
"Continue" button. After receipt of the signed
statement, you must then use the information provided therein
to complete the fields for "Signatory's Name" and
"Signatory's Position." At the time of final
submission, these are mandatory fields, which will produce an
ERROR if left blank.
|
|
|
|
|
STEP
2: If
any of the information is incorrect, click on the Go Back to
Modify button (bottom of this page) to make changes; then
re-validate the form by clicking on the Validate Form button
(bottom of the form).
Note: If
you are using the e-signature approach or the handwritten
pen-and-ink signature approach, you must click on the final link
to access the specific "text form" for that purpose.
|
STEP
3: If
there are no errors and you are ready to file this form
electronically, confirm the email address for acknowledgment.
Once you Pay/Submit the form electronically, we will send an
electronic acknowledgment of receipt to the email address entered
below. If no email address appears, you must enter one. If we
should send the acknowledgment to a different email address, or
to an additional address(es), please enter the proper address or
additional address(es). For multiple
addresses/receipts,
please separate email addresses by either a semicolon or
a comma.
NOTE: This
email address is only for the purpose of receiving the
acknowledgment that the transmission reached the USPTO, and is not
related to the email that will be used for correspondence purposes
(although it could be the same address). The official email
address that the USPTO will use for any communication is whatever
appears in the record for that purpose. If necessary, use the
Change Address or Representation Form to update an email address,
as it will NOT be changed based on the specific entry below.
* Email
for acknowledgment
|
|
To
ensure we can deliver your email confirmation successfully,
please re-enter your email
address(es) here:
|
* Email
for acknowledgment
|
|
|
|
STEP
4: To
download and save the form, click on the Save
Form button
at the bottom of this page. The information will be saved to your
local drive. To begin the submission process with saved data, you
must open a new form, and click on the "Browse/Choose File"
button displayed on the initial form wizard page, at "[OPTIONAL]
To access previously-saved data, use the "Browse/Choose
File" button below to access the file from your local
drive." REMINDER: Do NOT try
to open the saved .obj/.xml form directly. You must return to the
very first page of the form, as if starting a brand new form, and
then use the specific "Browse/Choose File" button on
that page to import the saved file. Clicking on the "Continue"
button at the bottom of that first page will then properly open
the saved version of your form.
|
STEP
5: Click
on the Pay/Submit button
below to complete the filing process. Shortly after clicking that
button, you should see a screen that says SUCCESS! Within
24 hours, the email acknowledgement will also be sent.
|
Paperwork
Reduction Act Statement
The
information collected for the Letter
of Protest allows
a third party to object to the registration of a mark currently
pending in the USPTO. This collection is authorized by 15 U.S.C. §§
1051 and 1123 and 37 CFR 2.146. All information collected will be
made public. Gathering, preparing, and submitting this information
will require an estimated 75 minutes to complete. Please direct
comments on the time needed to complete this form, and/or suggestions
for reducing this burden, to the Chief Administrative Officer, U.S.
Patent and Trademark Office, U.S. Department of Commerce, P.O. Box
1450, Alexandria, VA 22313-1450. Please note that the USPTO may not
conduct or sponsor a collection of information using a form that does
not display a valid OMB control number.
Privacy
Act Statement
The
USPTO collects this information under authority of 35 U.S.C. 2(b)(2).
The information you provide will be used to process your applications
and submissions related to trademark registration. The information in
this system of records is used to manage name, citizenship, domicile,
email address, postal address, and telephone number of the trademark
applicant, registrant, and applicant’s or registrant’s
legal or other authorized representative(s), an attorney’s law
firm or company affiliation and professional licensing information,
and other information pertaining to an applicant’s or
registrant’s activities in connection with the applied-for or
registered mark. The information is protected from disclosure to
third parties in accordance with the Privacy Act. However, routine
uses of this information may include disclosure to the following: the
public; certain foreign entities, professional organizations or
associations, audit or oversight controls; law enforcement;
non-federal personnel working for the agency; record and
informational inquiries; coordinators of data breach response;
litigation actions; Department of Justice; Office of Personnel
Management; Congressional inquiries; the National Archives and
Records Administration; and Office of Management and Budget. If you
do not furnish the requested information, the U.S. Patent and
Trademark Office may not be able to process and/or examine your
submission, which may result in termination of proceedings or
abandonment of the application for trademark registration. The
applicable Privacy Act System of Records Notice for this information
request is COMMERCE/USPTO-26, Trademarks Application and Registration
Records: Federal Register vol. 85 February 18, 2020, p 8847,
available at https://
www.govinfo.gov/content/pkg/FR-2020-02-18/pdf/2020-03068.pdf.
.
File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
Author | Wilkins, Jo Ann |
File Modified | 0000-00-00 |
File Created | 2021-10-18 |