Farm Labor Methodology and Quality Measures

Farm Labor Methodology and Quality
Measures
ISSN: 2167-1893

Released May 26, 2021, by the National Agricultural Statistics Service (NASS), Agricultural Statistics Board, United States Department of
Agriculture (USDA).

Agricultural (Farm) Labor Survey Methodology

Special Note
Beginning with this report, the coefficients of variation associated with model-based estimates are published. The
coefficients of variation associated with the survey indications alone, were previously published.
Pandemic-related restrictions initially implemented for the first and second survey quarters (January and April) of year
2020, continued through data collection for the first and second survey quarters of year 2021. All affected processes are
discussed in the respective sections, below.

Scope and Purpose: The NASS Agricultural (Farm) Labor Survey provides the basis for employment and wage estimates
for all workers directly hired by United States farms and ranches (excluding Alaska), for each of four quarterly reference
weeks. Selected annual average estimates are summarized from the associated quarterly estimates.
The employment and wage estimates published support USDA and Department of Labor programs, and are used by
additional federal, state, and local government agencies, educational institutions, farm organizations, and private sector
employers of farm labor. The Agricultural Labor Survey was conducted in cooperation with the Department of Labor
from year 2012 through the temporary suspension of the program in September 2020.
The NASS Agricultural Labor Survey is typically conducted semi-annually in April and October, in all surveyed states
except California. For California, these state-level data are collected on a quarterly basis, as part of the California
Employment Development Department (EDD) monthly labor program.
During the NASS Agricultural Labor Survey April data collection, data for both January and April reference weeks are
collected. During the October data collection, data for both July and October reference weeks are collected. The quarterly
reference week is the Sunday to Saturday period which includes the 12th day of the month.
Estimates published include number of hired workers during each quarterly reference week, the average hours worked,
and average wage rates by type of worker. Estimates are published for the United States, each of 15 multi-state labor
regions, and the single-state regions of California, Florida, and Hawaii.
Survey Timeline: Data collection typically begins the week following the April or October reference week and extends
approximately one week beyond the end of the month, for all surveyed states except California. In California, EDD data
collection begins shortly after the reference week in each of the four surveyed quarters and typically extends three to four
weeks beyond the end of the month. NASS Regional Field Offices (RFOs) have about five business days following the
NASS semi-annual data collection period, to complete editing and analysis, execute the summary, and evaluate the survey
results at the state level for each member state. The Agricultural Statistics Board performs a national review, reconciles
state-level evaluations to regional and national estimates, and prepares the official estimates for release in about eight to
ten business days. Official Farm Labor estimates are typically published in May (for the January and April quarters) and
November (for the July and October quarters, and annual average estimates).

Sampling: The target population for the Agricultural Labor Survey program is all farms and ranches with $1,000 or more
in agricultural sales (or potential sales), excluding Alaska farms. NASS uses a dual frame approach, consisting of list
frame and area frame components, to provide complete coverage of this target population.
The list frame includes all known agricultural establishments. A profile, called control data, of each establishment is
maintained on the list frame to allow NASS to define list frame sampling populations for specific surveys and to employ
efficient sampling designs. The primary control datum for farm labor is the peak number of workers value, the most
recently reported annual peak number of hired workers for each record. List frame records with positive peak number of
worker control data are included in the list frame farm labor population. The California list frame labor population defined
by positive peak number of workers alone is sufficiently complete, due to the collaboration with the California EDD. For
all other states, records without peak number of worker control data that have a calculated farm value of sales of at least
$10,000, many of which are expected to employ agricultural workers, are also part of the list frame farm labor population.
In total, the list frame farm labor population includes approximately 1.1 million United States farms and ranches.
The area frame contains all land in the United States (except Alaska) and is therefore complete for the Agricultural Labor
Survey program. For all states, land is stratified according to intensity of agriculture using satellite imagery. The land in
each stratum is divided into segments of roughly one square mile. Segments are optimally allocated and sampled to
effectively measure crops and livestock. The sampled segments are fully enumerated each June during the NASS June
Area Survey, in all states except Hawaii. All farms and ranches found operating tracts in enumerated segments are
checked to see if they are included in the list frame farm labor population. The farms and ranches that are not included in
the list frame labor population, called nonoverlap tracts, are eligible for the farm labor nonoverlap sample.
The farm labor list frame sample is selected using a hierarchical stratified sampling design with strata defined by peak
number of farm workers or calculated farm value of sales. The sample is a panel sample and is designed to achieve a
United States level coefficient of variation of four percent of the point estimate for all hired workers and one percent of
the ratio estimate for wage rates of all workers. The United States list frame sample size for the Agricultural Labor Survey
in recent years has been approximately 12,500. Beginning in April 2019, an increased list sample size of over 30,000 units
was used to accommodate program expansion; the April 2021 sample included over 35,000 units.
The farm labor area frame nonoverlap sample is selected using a stratified sample design based on data collected during
the annual NASS June Area Survey. An area frame nonoverlap sample is selected for each surveyed state except
California and Hawaii. The California sample does not include a nonoverlap portion because the list frame is assumed to
be complete. For Hawaii, the area frame is excluded from sampling because this frame is not updated on an annual basis.
The total farm labor area frame nonoverlap sample, which includes the remaining surveyed states, consists of
approximately 1,500 sampling units.
Each farm and ranch in this combined sample is assigned an initial sampling weight. For each farm or ranch sampled from
the list frame, this weight is the inverse of the sampling fraction for the state level stratum to which the sampled farm or
ranch is assigned. For example, if a stratum has 1,000 farms in the population and 200 are sampled for this survey, each
sampled farm has a weight of five. In other words, each sampled farm represents five farms. The nonoverlap tracts
sampled to measure the labor not accounted for by the list have a weight determined by adjusting their original area frame
weight by any second stage sampling weight.
Data Collection: Data collection proceeds with utilization of NASS data collection instruments and follow-up
procedures, in all surveyed states except California. In California, the California EDD conducts data collection utilizing
EDD-specific instruments and follow-up procedures which are similar to NASS procedures.
Data Collection for All States Except California
For consistency across modes, the paper version is considered the master questionnaire and the Computer Assisted
Telephone Interview (CATI) and web reporting instruments are built to model the paper instrument. Questionnaire
content and format are evaluated annually through a specifications process where requests for changes are evaluated and
approved or disapproved. Input may vary from question wording or formatting to a program change involving the deletion
or modification of current questions or addition of new ones. If there are significant changes to either the content or
format proposed, a NASS survey methodologist will pre-test the changes for usability. Prior to the start of data collection,
2

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

all instruments are reviewed including the CATI and web instruments, and the web-supported Computer Assisted
Personal Interview (CAPI) instrument.
All federal data collections require approval by the Office of Management and Budget (OMB). NASS must document the
public need for the data, show the design applies sound statistical practice, ensure the data do not already exist elsewhere,
and that the public is not excessively burdened. The Agricultural Labor Survey questionnaire must display an active OMB
number that gives NASS the authority to conduct the survey, a statement of the purpose of the survey and the use of the
data being collected, a response burden statement that gives an estimate of the time required to complete the form, a
confidentiality statement that the respondent’s information will only be used for statistical purposes in combination with
other producers, and a statement saying that response to the survey is voluntary and not required by law.
In addition to asking the specific farm labor items, all instruments collect information to verify the sampled unit,
determine any changes in the name or address, identify any partners to detect possible duplication, verify the farm still
qualifies for the target population, and identify any additional operations operated by the sampled operator.
During each semi-annual data collection period, sampled farms and ranches receive a pre-survey letter explaining the
survey and that they will be contacted for survey purposes only. The letter provides a paper copy of the questionnaire to
allow respondents to respond by mail or to prepare in advance for a follow-up interview and also provides a pass code
they can use to complete the survey on the internet. All questionnaires completed on paper are returned to the NASS
National Operations Center where they are visually reviewed and key entered. Typically, all modes of data collection are
utilized for the Agricultural Labor Survey. While mail is the least costly mode of collection, th e short data collection
period, combined with the postal delivery window, limit its effectiveness. In most years, most of the data are collected by
telephone follow-up interviews from NASS Data Collection Centers, using CATI. Personal interviews, conducted via
CAPI, are also typically available for large operations or those with special handling arrangements. Data collection is
coordinated for farms sampled for multiple on-going NASS surveys.
April 2021 Data Collection: Pandemic-related social distancing and decentralization policies continued through early year
2021. Follow-up was conducted by telephone interview exclusively, by residence-based enumerators associated with the
respective NASS RFO. Enumeration from the centralized NASS Data Collection Centers, and all in-person enumeration,
was temporarily suspended.
Data Collection for California
The California EDD utilizes a mail out phase with follow-up similar to the NASS procedure. All sampling units from the
NASS California labor sample receive an EDD labor questionnaire which includes the NASS Agricultural Labor Survey
questions as well as additional content. In recent years, telephone follow-up has been conducted by the associated NASS
Data Collection Center.
Because the EDD program is monthly, collection of California labor data begins shortly after each respective quarterly
reference week, and complete datasets are received at NASS by the following month. The EDD data collection period
typically extends two to three weeks beyond the concurrent NASS April and October data collection periods. For this
reason, the final California datasets for the April and October reference weeks are not fully processed until the following
NASS semi-annual survey period.
Throughout the EDD data collection period, electronic files containing labor data are regularly transmitted securely to the
NASS Pacific RFO in California, including that collected in the NASS Data Collection Center. These files are made
available to the NASS editing and analysis instruments, so that all subsequent data handling proceeds according to the
NASS data analysis and estimation program.
April 2021 Data Collection for California: Year 2021 data collection proceeded mostly as in previous years, while
observing the widely mandated social distancing and decentralization policy. Mailing and telephone follow-up were
conducted by on-site California EDD staff deemed essential, and decentralized NASS staff and operations.
Survey Edit: As survey data are collected and captured, data are edited for consistency and reasonableness using
automated systems. Reported data are edited as a batch of data when first captured. The edit logic ensures the coding of
Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

3

administrative data follows the methodological rules associated with the survey design. Relationships between data items
(i.e. responses to individual questions) on the current survey are verified. Some data items in the current survey are
compared to data items from earlier surveys to ensure certain relationships are logical. The edit assigns a status to each
record, indicating whether or not the record passes or fails the edit requirements for consistency and reasonableness.
Records that fail edit requirements must be updated or must be certified by an analyst to be exempt from the failed ed it
requirement. All records must pass edit requirements, or be certified exempt, before further analysis and summary.
Analysis Tools: Edited Agricultural Labor Survey data are processed and analyzed with a standard interactive data
analysis tool which displays data for all reports by item. The tool provides scatter plots, tables, charts, and special
tabulations that allow the analyst to compare record level data with previously reported data for the same record, and
reported data from similar records. Atypical responses, unusual data relationships, and statistical outliers for all labor
items are revealed by the analysis tool. RFO and NASS Headquarters (HQ) staff review such relationships to determine if
they are correct. Data found to be in error are corrected, while accepted data are retained.
Nonsampling Error: Nonsampling error is present in any survey process. This error includes reporting, recording, and
editing errors, as well as nonresponse error. Steps are taken to minimize the impact of these errors, such as questionnaire
testing, comprehensive interviewer training, validation and verification of processing systems, application of detailed
computer edits, and evaluation of the data via the analysis tool. The respondent pool is monitored and reviewed during
and after data collection, and data collection strategies modified where necessary, to continually minimize nonresponse
error.
Nonresponse Adjustment: Response to the Agricultural Labor Survey is voluntary. Some producers refuse to participate
in the survey, others cannot be located during the data collection period, and some submit incomplete reports. These
nonrespondents must be accounted for if accurate estimates of farm labor are to be made. Sample nonrespondents are
accounted for by adjusting the weights of the respondents; specifically, the initial sampling weight is revised to account
for actual response by stratum. To continue the previous example, if a list frame stratum has 1,000 farms in the population
and 200 are sampled for this survey, the initial sampling weight is five. After 180 of the original 200 respond, the weights
of the 180 will be “adjusted” to 1,000 divided by 180, or 5.56. Each response accounts for 5.56 farms, a slight increase
from the initial five farms. This global weight adjustment occurs by each assigned stratum per state, including both the
bounded strata as well as the unbounded stratum, as all strata represent homogeneous groupings of similar sized farms.
Calibration: After nonresponse-adjusted weights are generated through initial summarization, a calibration adjustment is
performed if necessary. Calibration is a weighting technique used to adjust the sampling weights on complete survey
reports so that the summarized values of a set of benchmark variables more closely approximate a derived set of values
for the population. The initial inputs to the calibration algorithm are the nonresponse-adjusted sampling weights. The
calibration algorithm, in targeting a derived set of values, is used to mitigate both the effects of highly influential outliers,
and the effects of survey nonresponse and disproportionate response across farm type and economic sales class.
Estimators: The Agricultural Labor Survey uses “reweighted” estimators to compute direct measures of hired farm
workers. Reweighted estimators are essentially the product of non-response and calibration-based reweighting processes.
Each such point estimate, called a direct expansion, is calculated by multiplying each reported value by the final
calibrated weight and first summing to stratum totals. A variance estimate is also computed at the stratum level. The
nonoverlap tracts are treated as an additional stratum. Totals and variances are additive across strata.
Ratio estimates are also computed for many items. For example, wage rates are calculated as the ratio of total wages to
total hours worked. Ratio estimators use the reweighted estimator described above for the numerator and denominator
direct expansions. Both the numerator and denominator must be usable in order for a given record to be used in the ratio
estimator.
Model-Based Estimators
Starting in 2020, model-based estimates of hired workers, average hours worked, average wage rates, and the associated
sub-items are produced to support NASS estimation processes. Statistical models are mathematical equations that relate
quantities of interest (in this case, number of workers, hours, and wage rates) to a set of important input factors. The
4

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

models used by NASS relate the direct expansions obtained from the current Agricultural Labor Survey to previous year,
same quarter official estimates. This modeling approach improves the precision of the resulting estimates. In particular,
estimates in publication cells derived from few reports become more precise than estimates derived from survey alone.
Outliers: Both RFO and HQ statisticians conduct a review of worker and wage outliers, identified through the interactive
data analysis tool, to ensure the most accurate data and indications possible. The RFO statisticians review outliers for
states within their regions and the HQ statistician examines outliers across all states. Many outliers trace back to unique
situations that do not exist in the target population as much as the survey weight would indicate. In some cases, aging
control data result in misstratification, and this misstratification can also give rise to outliers. The survey weight assigned
to each outlier is subject to an additional adjustment during the calibration process where appropriate, before final
summary estimates and model-based estimates are produced.
Estimation: The number of hired workers, average hours worked, average wage rate data, and all associated sub-items for
each surveyed reference week are summarized from the dataset. Because identical data collection instruments are used for
all states, as well as identical editing and analysis processes, state data can be summarized to regional and national survey
point estimates. Similarly, these data are used to support state, regional, and national model-based estimates. For
estimation purposes, survey point estimates are adopted as survey indications for all data items. The summary results
provide multiple direct and ratio indications for each data series being estimated. The results also provide information
used to assess the performance of the current survey and evaluate the quality of the survey indications. Currently, RFOs
evaluate state level survey indications and submit state-specific comments for all member states to HQ. HQ executes the
regional and United States level summaries, which utilize the same estimators and produce the same indications as the
state level summaries. The associated model-based estimates are subsequently generated, using the summarized survey
indications as input.
The estimation process is facilitated at all levels with a second interactive analysis tool, which selectively displays curre nt
and historic summary indications, model-based estimates, measures of indication and estimate quality, state level
comments, and final estimates for all published data items. The instrument generates tables and charts of this database
content, allowing statisticians to assess trends, evaluate current and historic relationships between summary indications,
model-based estimates, and final estimates, and current and historic state level comments on local conditions and data
assessment. Statisticians view and analyze all necessary database content through the instrument, to finalize the estimates.
RFO statisticians review only data and analyses associated with their member states; HQ statisticians subsequently review
all state, regional, and national data and analyses. All steps necessary to the coordination and confirmation of final
estimates are accomplished through this data tool. Additionally, the annual average estimates are calculated using this data
tool after all final quarterly estimates are established.
For the final step in the estimation process, NASS assembles a panel of statisticians to serve as the Agricultural Statistics
Board (ASB) representatives for the Farm Labor program, which reviews the United States level, regional, and state level
summary indications and model-based estimates and establishes all final, official estimates for each surveyed reference
week. The ASB employs a modified “top-down” approach, adhering closely to the United States level survey indications
while giving greater weight to state and regional level model-based estimates, in order to increase precision of all final
estimates for hired workers, average hours worked, average wage rates, and associated sub-items. As part of the semiannual process, the ASB also considers revised California data, and issues revisions of previously published California
and United States level estimates where appropriate. Through examining survey indications and model-based estimates
across states and regions, re-examining outliers and historic indications and estimates, and considering state level
comments, the ASB is able to establish all final estimates according to both local conditions and regional and national
conditions and trends. After all final quarterly estimates are established, the ASB verifies the annual average estimates for
the annual (typically November) publication, which are summarized weighted averages of the final United States and
regional level estimates for each of the four quarters.

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

5

Quality Metrics for the Agricultural (Farm) Labor Survey
Purpose and Definitions: Under the guidance of the Statistical Policy Office of the Office of Management and Budget
(OMB), the United States Department of Agriculture’s National Agricultural Statistics Service (NASS) provides data
users with quality metrics for its published data series. The metrics tables in this document describe the performance data
for the survey contributing to the publication. The accuracy of data products may be evaluated through sampling and
nonsampling error. The measurement of error due to sampling in the current period is evaluated by the coefficient of
variation for each estimated item. The multi-component nonsampling error can be difficult to quantify and measure, but
response rates may offer a partial assessment.
Sample size is the number of observations selected from the population to represent a characteristic of the
population. Operations that did not have the item of interest or were out of business at the time of data collection
have been excluded.
Response rate is the proportion of the sample that completed the survey. This calculation follows Guideline 3.2.2 of
the Office of Management and Budget Standards and Guidelines for Statistical Surveys (Sept. 2006) and the
American Association for Public Opinion Research (AAPOR) (2015). NASS surveys use the AAPOR Response Rate
2 (RR2) formula. In-scope records for the Agricultural Labor Survey include operations that did not have workers
because labor in the reference week is transitory for smaller operations.
Coefficient of variation provides a measure of the size for the standard error relative to the point estimate and is
used to measure the precision of the results of a survey estimator.

6

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

Coefficient of Variation for Modeled Estimate of Gross Wage Rate by Type of Worker – United States
Reference week

Field

Livestock

Field and livestock combined

(percent)

(percent)

(percent)

April 12-18, 2020 ...............................

0.6

0.8

0.5

April 11-17, 2021 ...............................

0.7

0.9

0.5

January 12-18, 2020 .........................

0.6

0.7

0.5

January 10-16, 2021 .........................

0.7

0.8

0.5

Farm Labor Sample Size and Response Rate – Regions and United States: April 12-18, 2020 and
April 11-17, 2021
Regions

Sample size

Response rate

2020

2021

2020

2021

(number)

(number)

(percent)

(percent)

Northeast I ....................................
Northeast II ...................................

1,402
2,195

1,401
2,262

47.7
51.5

43.9
41.1

Appalachian I ................................
Appalachian II ...............................

1,329
2,516

1,292
2,457

61.6
65.0

54.2
55.1

Southeast ......................................
Florida ...........................................

1,402
1,018

1,367
990

52.9
49.2

57.5
50.5

Lake ...............................................

1,778

1,851

52.3

43.4

Cornbelt I ......................................
Cornbelt II .....................................

3,569
2,458

3,555
2,438

51.6
56.0

40.9
37.2

Delta ..............................................

2,665

2,660

58.8

54.1

Northern Plains .............................

2,365

2,337

47.0

43.1

Southern Plains ............................

3,426

3,495

63.3

49.6

Mountain I .....................................
Mountain II ....................................
Mountain III ...................................

1,633
1,303
1,214

1,622
1,340
1,147

50.0
47.0
53.5

43.7
51.3
40.1

Pacific ............................................
California .......................................

1,976
1,111

2,015
1,066

45.2
59.2

34.7
43.5

Hawaii ...........................................

1,610

1,710

52.2

59.2

United States ................................

34,970

35,005

54.2

46.5

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

7

Farm Labor Sample Size and Response Rate – Region and United States: January 12-18, 2020 and
January 10-16, 2021
Regions

Sample size
2020

Response rate
2021

(number)

2020

(number)

2021

(percent)

(percent)

Northeast I .....................................
Northeast II ....................................

1,402
2,195

1,401
2,262

47.5
51.4

43.7
41.2

Appalachian I ................................
Appalachian II ...............................

1,329
2,516

1,292
2,457

61.6
65.2

54.0
55.0

Southeast ......................................
Florida ............................................

1,402
1,018

1,367
990

52.6
49.2

57.5
50.4

Lake ...............................................

1,778

1,851

52.8

43.3

Cornbelt I .......................................
Cornbelt II ......................................

3,569
2,458

3,555
2,438

52.0
56.3

41.5
37.1

Delta ..............................................

2,665

2,660

58.6

53.4

Northern Plains .............................

2,365

2,337

46.6

43.1

Southern Plains ............................

3,426

3,495

63.2

49.4

Mountain I
Mountain II ....................................
Mountain III ...................................

1,633
1,303
1,214

1,622
1,340
1,147

49.9
47.0
53.3

43.7
51.6
40.0

Pacific ............................................
California .......................................

1,976
1,111

2,015
1,066

45.3
65.0

34.9
68.0

Hawaii ............................................

1,610

1,710

51.7

59.1

United States ................................

34,970

35,005

54.4

47.2

8

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

Coefficient of Variation for Modeled Estimate of All Hired Workers and Gross Wage Rate – Region and
United States: April 12-18, 2020 and April 11-17, 2021
All hired workers

Regions

2020

Gross wage rate
2021

(percent)

2020

(percent)

2021

(percent)

(percent)

Northeast I ..................................................
Northeast II .................................................

6.2
5.4

5.8
6.5

2.1
1.8

1.1
2.0

Appalachian I ..............................................
Appalachian II .............................................

13.5
7.9

9.5
8.7

1.4
1.7

1.4
2.4

Southeast ....................................................
Florida .........................................................

7.8
8.1

7.8
11.7

1.3
1.7

2.1
1.8

Lake .............................................................

6.4

8.4

1.5

1.8

Cornbelt I ....................................................
Cornbelt II ...................................................

6.9
11.2

7.1
9.8

1.9
2.6

1.9
2.0

Delta ............................................................

6.3

5.8

1.2

1.4

Northern Plains ...........................................

7.0

7.5

1.7

1.5

Southern Plains ..........................................

8.7

7.0

2.5

1.9

Mountain I ...................................................
Mountain II ..................................................
Mountain III .................................................

6.3
10.2
6.6

7.3
9.0
8.8

1.5
2.1
1.4

1.9
1.8
2.2

Pacific ..........................................................
California .....................................................

11.8
4.0

7.5
5.7

1.3
1.1

1.2
1.3

Hawaii .........................................................

9.4

8.3

2.1

3.0

United States ..............................................

2.1

2.0

0.5

0.5

Coefficient of Variation for Modeled Estimate of Hired Workers and Gross Wage Rate by Standard
Occupational Classification (SOC) System – United States: April 12-18, 2020 and April 11-17, 2021
Title

SOC code

All hired workers

Gross wage rate

2020

2021

2020

2021

(percent)

(percent)

(percent)

(percent)

Graders and sorters, agricultural products ......................................................
Agricultural equipment operators .....................................................................
Farmworkers, crop, nursery, and greenhouse ................................................
Farmworkers, farm, ranch, and aquacultural animals .....................................
Agricultural workers, all other ...........................................................................
Packers and packagers, hand ..........................................................................

(45-2041)
(45-2091)
(45-2092)
(45-2093)
(45-2099)
(53-7064)

13.5
3.5
3.4
4.1
8.3
17.3

15.5
4.3
4.2
4.6
9.1
12.8

3.1
0.8
0.7
1.0
2.0
2.2

2.7
1.0
0.8
1.0
2.3
2.5

Farmers, ranchers, and other agricultural managers ......................................
First-line supervisors of farming, fishing workers ............................................

(11-9013)
(45-1011)

4.7
5.0

4.7
5.2

2.1
1.6

2.0
2.0

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

9

Coefficient of Variation for Modeled Estimate of All Hired Workers and Gross Wage Rate – Region and
United States: January 12-18, 2020 and January 10-16, 2021
All hired workers

Regions

2020

Gross wage rate
2021

(percent)

2020

(percent)

2021

(percent)

(percent)

Northeast I ...................................................
Northeast II ..................................................

6.7
6.6

5.9
7.0

2.3
2.2

1.5
2.0

Appalachian I ..............................................
Appalachian II .............................................

11.8
9.4

9.6
7.6

1.9
1.6

1.7
2.4

Southeast ....................................................
Florida ..........................................................

7.5
7.5

8.4
13.1

1.5
1.6

1.5
2.4

Lake .............................................................

6.7

8.7

1.7

1.8

Cornbelt I .....................................................
Cornbelt II ....................................................

7.5
11.9

6.5
10.7

1.8
2.2

1.7
2.6

Delta ............................................................

7.9

6.1

1.7

1.5

Northern Plains ...........................................

7.8

7.7

1.6

1.6

Southern Plains ..........................................

8.7

6.1

1.7

2.2

Mountain I ...................................................
Mountain II ..................................................
Mountain III .................................................

6.4
11.0
6.6

7.9
8.3
9.5

1.9
2.5
1.3

2.2
1.9
1.7

Pacific ..........................................................
California .....................................................

6.4
3.6

7.0
4.1

1.3
1.0

1.4
1.4

Hawaii ..........................................................

9.6

9.8

1.9

3.1

United States ..............................................

2.0

2.2

0.5

0.6

Coefficient of Variation for Modeled Estimate of Hired Workers and Gross Wage Rate by Standard
Occupational Classification (SOC) System – United States: January 12-18, 2020 and
January 10-16, 2021
Title

All hired workers

SOC code

Gross wage rate

2020

2021

2020

2021

(percent)

(percent)

(percent)

(percent)

Graders and sorters, agricultural products ......................................................
Agricultural equipment operators .....................................................................
Farmworkers, crop, nursery, and greenhouse ................................................
Farmworkers, farm, ranch, and aquacultural animals ....................................
Agricultural workers, all other ...........................................................................
Packers and packagers, hand .........................................................................

(45-2041)
(45-2091)
(45-2092)
(45-2093)
(45-2099)
(53-7064)

11.5
4.1
3.2
4.1
9.2
12.9

12.9
4.6
4.0
4.0
10.9
10.0

1.8
1.0
0.7
0.9
1.8
1.9

4.0
1.0
0.9
1.0
2.3
2.2

Farmers, ranchers, and other agricultural managers .....................................
First-line supervisors of farming, fishing workers ...........................................

(11-9013)
(45-1011)

4.2
5.0

4.9
9.6

1.7
1.5

2.0
3.1

10

Farm Labor Methodology and Quality Measures (May 2021)
USDA, National Agricultural Statistics Service

Access to NASS Reports
For your convenience, you may access NASS reports and products the following ways:
➢ All reports are available electronically, at no cost, on the NASS web site: www.nass.usda.gov
➢ Both national and state specific reports are available via a free e-mail subscription. To set-up this free
subscription, visit www.nass.usda.gov and click on “National” or “State” in upper right corner above “search”
box to create an account and select the reports you would like to receive.
➢ Cornell’s Mann Library has launched a new website housing NASS’s and other agency’s archived reports. The
new website, https://usda.library.cornell.edu. All email subscriptions containing reports will be sent from the new
website, https://usda.library.cornell.edu. To continue receiving the reports via e-mail, you will have to go to the
new website, create a new account and re-subscribe to the reports. If you need instructions to set up an account or
subscribe, they are located at: https://usda.library.cornell.edu/help. You should whitelist notifications@usdaesmis.library.cornell.edu in your email client to avoid the emails going into spam/junk folders.
For more information on NASS surveys and reports, call the NASS Agricultural Statistics Hotline at (800) 727-9540,
7:30 a.m. to 4:00 p.m. ET, or e-mail: nass@usda.gov.
The U.S. Department of Agriculture (USDA) prohibits discrimination against its customers, employees, and applicants for
employment on the basis of race, color, national origin, age, disability, sex, gender identity, religion, reprisal, and where
applicable, political beliefs, marital status, familial or parental status, sexual orientation, or all or part of an individual's
income is derived from any public assistance program, or protected genetic information in employment or in any program
or activity conducted or funded by the Department. (Not all prohibited bases will apply to all programs and/or
employment activities.)
If you wish to file a Civil Rights program complaint of discrimination, complete the USDA Program Discrimination
Complaint Form (PDF), found online at www.ascr.usda.gov/filing-program-discrimination-complaint-usda-customer, or
at any USDA office, or call (866) 632-9992 to request the form. You may also write a letter containing all of the
information requested in the form. Send your completed complaint form or letter to us by mail at U.S. Department of
Agriculture, Director, Office of Adjudication, 1400 Independence Avenue, S.W., Washington, D.C. 20250-9410, by fax
(202) 690-7442 or email at program.intake@usda.gov.