SS-1218-0224 Overhead and Gantry Cranes (11.2020)

Overhead and Gantry Cranes Standard (29 CFR 1910.179)

1218-0224

November 30, 2020

SUPPORTING STATEMENT FOR THE INFORMATION COLLECTIONS REQUIREMENTS OF THE

OVERHEAD AND GANTRY CRANES STANDARD (29 CFR 1910.179)¹

OFFICE OF MANAGEMENT AND BUDGET (OMB)

CONTROL NO. 1218-0224 (September 2020)

This ICR is requesting the extension of a currently approved data collection.

A. JUSTIFICATION

1. Explain the circumstances that make the collection of information necessary. Identify any legal or administrative requirements that necessitate the collection. Attach a copy of the appropriate section of each statute and regulation mandating or authorizing the collection of information.

The main objective of the Occupational Safety and Health Act of 1970 (i.e., “the Act”) is to “assure so far as possible every working man and woman in the Nation safe and healthful working conditions and to preserve our human resources” (29 U.S.C. 651). To achieve this objective, the Act authorizes “the development and promulgation of occupational safety and health standards” (29 U.S.C. 651).

Section 6(b)(7) of the Act specifies that “any standard promulgated under this subsection shall prescribe the use of labels or other appropriate forms of warning as are necessary to insure that workers are apprised of all hazards to which they are exposed, relevant symptoms and appropriate emergency treatment, and proper conditions and precautions of safe use or exposure.” This provision goes on to state that “[t]he Secretary, in consultation with the Secretary of Health and Human Services, may by rule promulgated pursuant to section 553 of title 5, United States Code, make appropriate modifications in the foregoing requirements relating to the use of labels or other forms of warning . . . as may be warranted by experience, information, or medical or technological developments acquired subsequent to the promulgation of the relevant standard” (29 U.S.C. 655).

With regard to recordkeeping, the Act specifies that “[e]ach employer shall make, keep and preserve, and make available to the Secretary . . . such records . . . as the Secretary . . . may prescribe by regulation as necessary or appropriate for the enforcement of this Act . . . ” (29 U.S.C. 657). The Act states further that “[t]he Secretary . . . shall prescribe such rules and regulations as [he/she] may deem necessary to carry out [his/her] responsibilities under this Act, including rules and regulations dealing with the inspection of an employer’s establishment” (29 U.S.C. 657).

Under the authority granted by the Act, the Occupational Safety and Health Administration (i.e., “OSHA” or “the Agency”) published at 29 CFR 1910.179 a safety standard for general industry regulating the operation of overhead and gantry cranes (i.e., “the Standard"). The paperwork

provisions of the Standard specify requirements for: Marking the rated load of cranes; preparing certification records to verify the inspection of the crane hooks, hoist chains, and rope; and preparing reports of rated load test for repaired hooks or modified cranes. Records and reports must be maintained and disclosed upon request.

2. Indicate how, by whom, and for what purpose the information is to be used. Except for a new collection, indicate the actual use the Agency has made of the information received from the current collection.

The Standard specifies several paperwork requirements. The following sections describe who uses the information collected under each requirement, as well as how they use it. The purpose of these requirements is to prevent death and serious injuries among workers by ensuring that all critical components of the crane are inspected and tested on a periodic basis and that the crane is not used to lift loads beyond its rated capacity.

(A) Marking the Rated Load (§§1910.179 (b)(3), (b)(5), and (k)(2))

Paragraph (b)(5) requires that the rated load be plainly marked on the side of each crane. If the crane has more than one hoist, the rated load must be marked on each hoist or the load block. The manufacturer will mark the rated loads. If the crane is modified, paragraph (b)(3) requires the new rating to be determined and marked on the crane. Also, paragraph (k)(2) requires employers to retain rated test load results and that the results are readily available to appointed personnel. Marking the rated load capacity of a crane ensures that employers and workers will not exceed the limits of the crane, which can result in crane failure.

(B) Inspection of and Certification Records for Hooks and Hoist Chains (§§1910.179 (j)(2)(iii), (j)(2)(iv), (j)(4), and (m)(2))

Paragraphs (j)(2)(iii) and (j)(2)(iv) require monthly inspections with certification records of hooks and hoist chains. The certification must include the date of the inspection, the signature of the person who performed the inspection, and the serial number, or other identifier, of the inspected hook or hoist chain. Paragraph (j)(4) requires cranes that are not in regular use meet the requirements of paragraphs (j)(2) and (m)(2). Paragraph (j)(4)(iii) specifically requires that standby cranes be inspected semi-annually in accordance with paragraphs (j)(2) and (m)(2). Certification records provide employers, workers, and OSHA compliance officers with assurance that the hooks and hoist chains used on cranes regulated by the Standard have been inspected as required by the Standard. These inspections help assure that the equipment is in good operating condition, thereby preventing failure of the hooks, ropes or hoist chains during material handling. These records also provide the most efficient means for the compliance officers to determine that an employer is complying with the Standard.

(C) Repair and Testing of Defective Hooks (§§1910.179(l)(3) and (k)(2))

As required by paragraph (k)(2), employers must make readily available test reports of load rating tests of repaired crane hooks conducted under paragraph (l)(3)(iii)(a). These reports inform the employer, workers, and OSHA compliance officers that a rated load test was

performed, providing information about the capacity of the crane and the adequacy of the hook Crane operators use this information so that they will not exceed the rated load of the crane or hook.

(D) Inspection of and Certification Records for Ropes (§§1910.179 (m)(1) and (m)(2))

Paragraph (m)(1) requires employers to inspect thoroughly all running rope in use, and do so at least once a month. In addition, rope, which has been idle for at least a month, must be inspected before use, and a record prepared to certify that the inspection was done. The certification record must include the inspection date, the signature of the person conducting the inspection, and the identifier of the rope inspected. Employers must keep the certification records on file and available for inspection. The certification records provide employers, workers, and OSHA compliance officers with assurance that the ropes are in good condition.

In addition, paragraph (m)(2) requires that the employer thoroughly inspect all rope which has been idle for period of a month or more. This inspection shall be for all types of deterioration and shall be performed by an appointed person whose approval shall be required for further use of the rope. A certification record shall be prepared and include the date of inspection; the signature of the person who performed the inspection; and, an identifier for the rope which was inspected.

(E) Disclosure of Inspection Certification Records

Usually, OSHA requests access to records during an inspection. The Agency has determined that information collected by the Agency during the investigation is not subject to the PRA under 5 CFR 1320.4(a)(2). Therefore, OSHA takes no burden or cost for disclosure of records.

3. Describe whether, and to what extent, the collection of information involves the use of automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses, and the basis for the decision for adopting this means of collection. Also describe any consideration of using information technology to reduce burden.

Employers may use automated, electronic, mechanical, or other technological information collection techniques, or other forms of information technology (e.g., electronic submission of responses) when establishing and maintaining the required records. The Agency wrote the paperwork requirements of the Standard in performance-oriented language (i.e., in terms of what data to collect, not how to record the data).

4. Describe efforts to identify duplication. Show specifically why any similar information already available cannot be used or modified for use for the purpose(s) described in A.2 above.

The requirements to collect and maintain information are specific to each employer and worker involved, and no other source or agency duplicates these requirements or can make the required information available to OSHA (i.e., the required information is available only from employers).

5. If the collection of information impacts small businesses or other small entities, describe the methods used to reduce the burden.

The information collection requirements specified by the Standard do not have a significant impact on a substantial number of small entities.

6. Describe the consequence to Federal program or policy activities if the collection is or is not conducted less frequently and any technical or legal obstacles to reducing the burden.

The Agency believes that the information collection frequencies required by the Standard are the minimum frequencies necessary to effectively regulate overhead and gantry cranes, and thereby fulfill its mandate “to assure so far as possible every working man and woman in the nation safe and healthful working conditions and to preserve our human resources” as specified in the Act at 29 U.S.C. 651. Accordingly, if employers do not perform the required information collections, or delay in providing this information, workers may not have the information they need about the lifting limits of the crane or the condition of critical components, thus, potentially increasing the risk of death and serious injury to workers.

7. Explain any special circumstances that would cause an information collection to be conducted in a manner:

• requiring respondents to report information to the agency more often than quarterly;

• requiring respondents to prepare a written response to a collection of information in

fewer than 30 days after receipt of it;

• requiring respondents to submit more than an original and two copies of any

document;

• requiring respondents to retain records, other than health, medical, government

contract, grant-in-aid, or tax records for more than three years;

• in connection with a statistical survey that is not designed to produce valid and

reliable results that can be generalized to the universe of study;

• requiring the use of statistical data classification that has not been reviewed and

approved by OMB;

• that includes a pledge of confidentially that is not supported by authority established

in statute or regulation that is not supported by disclosure and data security policies

that are consistent with the pledge, or which unnecessarily impedes sharing of data

with other agencies for compatible confidential use; or

• requiring respondents to submit proprietary trade secret, or other confidential

information unless the agency can prove that it has instituted procedures to protect

the information's confidentially to the extent permitted by law.

No special circumstances exist that require employers to collect information using the procedures specified by this item. The requirements are within the guidelines set forth in 5 CFR 1320.5.

8. If applicable, provide a copy and identify the date and page number of publication in the Federal Register of the agency's notice, required by 5 CFR 1320.8(d), soliciting comments on the information collection before submission to OMB. Summarize public comments received in response to that notice and describe actions taken by the agency in response to those comments specifically address comments received on cost and hour burdens.

Describe efforts to consult with persons outside the agency to obtain their views on the availability of data, frequency of collection, the clarity of instructions and recordkeeping, disclosure, or reporting format (if any), and on the data elements to be recorded, revealed, or reported.

Consultation with representatives of those from whom information is to be obtained or those who must compile records should occur at least once every three years -- even if the collection of information activity is the same as in prior periods. There may be circumstances that mitigate against consultation in a specific situation. These circumstances should be explained.

As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 3506(c)(2)(A)), OSHA published a notice in the Federal Register on August 18, 2020 (85 FR 50838) soliciting public comments on its proposal to extend the Office of Management and Budget’s (OMB) approval of the information collection requirements contained in the Overhead And Gantry Cranes Standard (29 CFR 1910.179). This notice was a part of a preclearance consultation program that provided the general public and government agencies with an opportunity to comment. The Agency did not receive any comments in response to this notice.

9. Explain any decision to provide any payments or gift to respondents, other than remuneration of contractors or grantees.

The Agency will not provide payments or gifts to the respondents.

10. Describe any assurance of confidentiality provided to respondents and the basis for the assurance in statute, regulation, or agency policy.

The paperwork requirements specified by the Standard do not involve confidential information.

11. Provide additional justification for any questions of a sensitive nature, such as sexual behavior and attitudes, religious beliefs, and other matters that are commonly considered private. This justification should include the reasons why the agency considers the questions necessary, the specific uses to be made of the information, the explanation to be given to persons from whom the information is requested, and any steps to be taken to obtain their consent.

None of the provisions in the Standard require sensitive information.

12. Provide estimates of the hour burden of the collection of information. The statement should:

• Indicate the number of respondents, frequency of response, annual hour burden, and an explanation of how the burden was estimated. Unless directed to do so, agencies should not conduct special surveys to obtain information on which to base hour burden estimates. Consultation with a sample (fewer than 10) of potential respondents is desirable. If the hour burden on respondents is expected to vary widely because of differences in activity, size, or complexity, show the range of estimated hour burden, and explain the reasons for the variance. Generally, estimates should not include burden hours for customary and usual business practices.

• If this request for approval covers more than one form, provide separate hour burden estimates for each form and aggregate the hour burdens.

• Provide estimates of annualized cost to respondents for the hour burdens for collections of information, identifying and using appropriate wage-rate categories.

Respondent Burden-Hour and Burden Cost Determinations

To date, the agency has been unable to update the data used in the previous ICR. Therefore, OSHA continues to rely on data used in the previous ICR with updates as appropriate.

According to the Preliminary Economic Analysis (PEA) for the Proposed Rule on Cranes and Derricks for Construction (73 FR 59713), there are 34,994 cranes operating in the general industry sector annually and at most, 90% (31,495) of the cranes are overhead and gantry cranes. Based on staff expertise, OSHA estimates that approximately 85% (26,771) of these cranes are in full-time service (i.e., used more than once a month) and the remaining 15% (4,724) are cranes in the category of idle or standby (i.e., not in use for more than one month or more at a time).

The Agency determined the wage rate from mean hourly wage earnings to represent the cost of employee time. The following hourly wage rates for the relevant occupational categories have been derived from the National Occupational Employment and Wage Estimates United States, May 2019, published by the Bureau of Labor Statistics. For the relevant standard occupational classification category, OSHA used the wage rates reported in the Bureau of Labor Statistics, U.S. Department of Labor, Occupational Employment Statistics (OES), May 2019 [date accessed: May 2020].

To determine the fringe markup, this markup is from the following BLS release: Employer Costs for Employee Compensation news release text; For release 10:00 AM (EDT), June 18, 2020 (https://www.bls.gov/news.release/pdf/ecec.pdf). BLS reported that for civilian workers, fringe benefits accounted for 29.8 percent of total compensation and wages accounted for the remaining 70.2 percent. To calculate the loaded hourly wage for each occupation, the Agency divided the mean hourly wage by 70.2 percent.

TABLE 1 WAGE HOUR ESTIMATES
Occupational Title	Standard Occupation Code	Mean Hour Wage Rate (A)	Fringe Benefits (B)	Loaded Hourly Wage Rate (C) = (A)/((1-(B))
Crane and Tower Operator	53-7021	$29.10	0.298	$41.45

(A) Marking the Rated Load (§§ 1910.179(b)(3), (b)(5), and (k)(2))

Crane manufacturers mark the rated load on cranes as required by paragraph (b)(5) of the Standard as a usual and customary business practice. However, there are cases where an employer modifies a crane. In those situations, paragraph (b)(3) of the Standard requires that the new rating be determined and the new rated load posted. The new rated load information would be obtained and posted after engineering calculations are performed and various tests are conducted. It is estimated that the entire activity would take a crane operator about 2 hours, including obtaining the information and marking it on the crane and hoist as required by the Standard. The 2 hours also includes the time for an operator to place the test report on file where it is readily available to appointed personnel in accordance with §1910.179(k)(2). OSHA estimates that very few, if any, cranes are modified each year; no more than .1% (31). Therefore, the total annual burden hour and cost estimates for these paperwork requirements are:

Burden hours: 31 cranes x 2 hours = 62

Cost: 62 hours x 41.45 = $2,570

(B) Inspection of and Certification Records for Hooks and Hoist Chains (§§ 1910.179 (j)(2)(iii), (j)(2)(iv), (j)(4), and (m)(2))

Employers must perform monthly inspections of the hooks and hoist chains on the 26,771 overhead and gantry cranes in full-time service. Cranes that have been idle are also subject to inspection either before being put into service or at least every six months, so they are always standing by, ready for activation. For the purpose of calculating the burden associated with the inspection records, OSHA assumes that when one crane is put into service, another becomes idle, so that at any time during the year, all 26,771 cranes are subject to either a monthly inspection; or are being inspected prior to being placed in service; or are being inspected semi-annually because they have been idle for 6 months or more. This estimate assumes no crane is idle for more than six months. OSHA assumes that a crane operator takes approximately 30 minutes (30/60 hour) to conduct the monthly inspection of the hooks, hoist chains, and ropes and to develop and maintain a certification record of the inspection. Therefore, the total annual burden hour and cost estimates for this paperwork requirement are:

Burden hours: 26,771 inspections x 12 (monthly) x 30/60 hours =

160,626

Cost: 160,626 hours x $41.45 = $6,657,948

(C) Repair and Testing of Defective Hooks (§ 1910.179(l)(3) and (k)(2))

Paragraph (l)(3)(iii)(a) states that crane hooks showing defects described in paragraph (j)(2)(iii) of this section shall be discarded. Repairs by welding or reshaping are not generally recommended. If such repairs are attempted, they shall only be done under competent supervision and the hook shall be tested to the load requirements of paragraph (k)(2) of this section before further use. Paragraph (k)(2) requires that a copy of the test reports from rated load test be placed on file and available to appointed personnel.

Such tests are required when repairs to hooks are made by welding or reshaping ((l)(3)(iii)(a)). OSHA believes the number of hooks being tested would be few, given that the standard discourages repairing and testing hooks and, in general, it is more cost effective to replace the hook. The Agency assumes no more than .1% (31) of the 90% hooks (31,495) on the cranes would be tested. (34,994 x 90% are estimated to be overhead gantry cranes =31,495)

The test would be conducted by either a crane operator or engineer. OSHA estimates it will take about 1 hour to conduct the test and prepare and maintain the report. Note that the Standard does not specify what information must be included in the report.

Burden hours: 31 cranes x 1 hour = 31

Cost: 31 hours x $41.45 = 1,285

(D) Inspection of and Certification Records for Ropes (§ 1910.179(m))

Paragraph (m)(1) requires employers to inspect thoroughly all running rope in use, and to do so at least once a month. In addition, rope which has been idle for at least a month must be inspected before use, as prescribed by paragraph (m)(2), and a record prepared to certify that the inspection was done. The certification records must include the inspection date, the signature of the person conducting the inspection, and the identifier of the rope inspected. Employers must keep the certification records on file and available for inspection. The certification records provide employers, workers, and OSHA compliance officers with assurance that the ropes are in good condition. OSHA assumes that a crane operator takes 30 minutes (30/60 hour) to inspect the rope and to develop and maintain a certification record of each inspection. The assumptions discussed in (B) above regarding the number of cranes in use and those idle are used here, resulting in total annual burden hour and cost estimates of:

Burden hours: 26,771 cranes x 12 monthly inspections x 30/60 hour =

160,626

Cost: 160,626 hours x $41.45 = $6,657,948

(E) Disclosure of Inspection Certification Records

Usually, OSHA request access to records during an inspection. The Agency has determined that information collected by the Agency during the investigation is not subject to the PRA under 5 CFR 1320.4(a)(2). Therefore, OSHA takes no burden or cost for disclosure of records.

Table 2 – Summary of Responses, Burden Hours, and Cost

Collection of Information	Number of Respondents a	Frequency per respondent b	Total Responses c = a x b	Time per response d	Burden Hours e = c x d	Wage Rate f	Cost g = e x f
Marking the Rated Load	31	1	31	2 hours	62	$41.45	$2,570
Inspection and Certification Records for Hooks and Hoist Chains	26,771	12 months	321,252	30/60 hours	160,626	$41.45	$6,657,948
Repair and Testing of Defective Hooks	31	1	31	1 hour	31	$41.45	$1,285
Inspection and Certification Records for Ropes	26,771	12 months	321,252	30/60 hours	160,626	$41.45	$6,657,948
Disclosure of Inspection Certification Records	0	0	0	0	0	0	0
Totals			642,566		321,345		$13,319,751

13. Provide an estimate of the total annual cost burden to respondents or recordkeepers resulting from the collection of information. (Do not include the cost of any hour burden shown in Items 12 and 14.)

• The cost estimate should be split into two components: (a) a total capital and start-up cost component annualized over its expected useful life); and (b) a total operation and maintenance and purchase of service component. The estimates should take into account costs associated with generating, maintaining, and disclosing or providing the information. Include descriptions of methods used to estimate major cost factors including system and technology acquisition, expected useful life of capital equipment, the discount rate(s), and the time period over which costs will be incurred. Capital and start-up costs include, among other items, preparations for collecting information such as purchasing computers and software; monitoring, sampling, drilling and testing equipment; and record storage facilities

• If cost estimates are expected to vary widely, agencies should present ranges of cost burdens and explain the reasons for the variance. The cost of purchasing or contracting out information collection services should be a part of this cost burden estimate. In developing cost burden estimates, agencies may consult with a sample of respondent (fewer than 10), utilize the 60-day pre-OMB submission public comment process and use existing economic or regulatory impact analysis associated with the rulemaking containing the information collection, as appropriate.

• Generally, estimates should not include purchases of equipment or services, or portions thereof, made: (1) prior to October 1, 1995, (2) to achieve regulatory compliance with requirements not associated with the information collection, (3) for reasons other than to provide information or keep records for the government, or (4) as part of customary and usual business or private practices.

Item 12 above provides the total cost of the information collection requirements specified by the Standard. Therefore, there is no cost to the respondent other than their time.

14. Provide estimates of the annualized cost to the Federal Government. Also, provide a description of the method used to estimate cost, which should include quantification of hours, operational expenses (such as equipment, overhead, printing, and support staff), and any other expense that would not have been incurred without this collection of information. Agencies also may aggregate cost estimates from Items 12, 13, and 14 into a single table.

Agency has no annualized cost associated with enforcing the Standard. OSHA would only review records in the context of an investigation of a particular employer to determine compliance with the Standard. These activities are outside the scope of the PRA. See 5 CFR 1320.4(a)(2).

15. Explain the reasons for any program changes or adjustments.

OSHA is requesting to retain its current burden of 321,345 hours.

Table 3: Requested Burden Hours and Adjustments

	Information Collection Requirements	Current Burden Hours	Requested Burden Hours	Adjustment	Explanation for Adjustment
(A)	Marking the Rated Load ((§§ 1910.179(b)(3), (b)(5), and (k)(2))	62	62	0	No change.
(B)	Inspection of and Certification Records for Hooks and Hoist Chains (§§ 1910.179 (j)(2)(iii), (j)(2)(iv), and (j)(4))	160,626	160,626	0	No change.
(C)	Repair and Testing of Defective Hooks (§ 1910.179(l)(3) and (k)(2))	31	31	0	No change.
(D)	Inspection of and Certification Records for Ropes (§ 1910.179 (m))	160,626	160,626	0	No change.
(E)	Disclosure of Inspection Certification Records	0	0	0	No change.
	Totals	321,345	321,345	0

16. For collections of information whose results will be published, outline plans for tabulation, and publication. Address any complex analytical techniques that will be used. Provide the time schedule for the entire project, including beginning and ending dates of the collection information, completion of report, publication dates, and other actions.

OSHA will not publish the information collected under the Standard.

17. If seeking approval to not display the expiration date for OMB approval of the information collection, explain the reasons that display would be appropriate.

OSHA lists current valid control numbers in §§1910.8, 1917.4, 1918.4, and 1926.5 and publishes the expiration date in the Federal Register notice announcing OMB approval of the Information-collection requirements. (See 5 CFR 1320.3((f)(3)). OSHA believes that this is the most appropriate and accurate mechanism to inform interested parties of the expiration dates.

18. Explain each exception to the certification statement.

OSHA is not seeking an exception to the certification statement.

B. COLLECTIONS OF INFORMATION EMPLOYING STATISTICAL METHODS

This Supporting Statement does not contain any collection of information requirements that employ statistical methods.

1The purpose of this Supporting Statement analyzes and describes the burden hours and cost associated with provisions of this Standard that contain paperwork requirements; this Supporting Statement does not provide information or guidance on how to comply with, or how to enforce, the Standard.