NESHAP for Polyether Polyols
Production (40 CFR part 63, subpart PPP) (Renewal)
Extension without change of a currently approved collection
No
Regular
06/04/2020
Requested
Previously Approved
36 Months From Approved
01/31/2021
48
48
3,710
3,710
0
0
The NESHAP for Polyether Polyols
Production (40 CFR Part 63, Subpart PPP) were proposed on September
4, 1997; promulgated on June 1, 1999; and amended on March 27,
2014. These regulations apply to both new and existing facilities
that engage in the manufacture of polyether polyols (including
polyether mono-ols) and emit hazardous air pollutants (HAPs).
Owners or operators of polyether polyols production facilities to
which this regulation applies must either choose one of the
compliance options described in the rule or install and monitor a
specific control system that reduces HAP emissions to the
compliance level. Respondents are also subject to sections of 40
CFR Part 63, Subpart A. New facilities include those that commenced
construction, modification, or reconstruction after the date of
proposal. This information is being collected to assure compliance
with 40 CFR Part 63, Subpart PPP. In general, all NESHAP standards
require initial notifications, performance tests, and periodic
reports by the owners/operators of the affected facilities. They
are also required to maintain records of the occurrence and
duration of any startup, shutdown, or malfunction in the operation
of an affected facility, or any period during which the monitoring
system is inoperative. These notifications, reports, and records
are essential in determining compliance, and are required of all
affected facilities subject to NESHAP.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.