Download:
pdf |
pdfFederal Register / Vol. 85, No. 182 / Friday, September 18, 2020 / Notices
should address one or more of the
following four points:
(1) Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
(2) Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
(3) Enhance the quality, utility, and
clarity of the information to be
collected; and
(4) Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submission of
responses.
jbell on DSKJLSW7X2PROD with NOTICES
Overview of This Information
Collection
19:15 Sep 17, 2020
Jkt 250001
Dated: September 10, 2020.
Samantha L Deshommes,
Deputy Chief, Regulatory Coordination
Division, Office of Policy and Strategy, U.S.
Citizenship and Immigration Services,
Department of Homeland Security.
[FR Doc. 2020–20557 Filed 9–17–20; 8:45 am]
BILLING CODE 9111–97–P
DEPARTMENT OF THE INTERIOR
Geological Survey
[GX20RN00COM0011; OMB Control Number
1028–0048]
Agency Information Collection
Activities; Did You Feel It? Earthquake
Questionnaire
U.S. Geological Survey,
Interior.
ACTION: Notice of information collection;
request for comment.
AGENCY:
(1) Type of Information Collection:
Extension, Without Change, of a
Currently Approved Collection.
(2) Title of the Form/Collection:
Sponsor Deeming and Agency
Reimbursement.
(3) Agency form number, if any, and
the applicable component of the DHS
sponsoring the collection: G–1552;
USCIS.
(4) Affected public who will be asked
or required to respond, as well as a brief
abstract: Primary: Federal Government;
or State, local or Tribal Government.
The G–1552 is created to collect
information via Systematic Alien
Verification for Entitlements (SAVE)
program regarding actions that agencies
adjudicating federal means-tested public
benefits take to (1) deem sponsor
income as part of applicant income for
purposes of federal means-tested
benefits eligibility and (2) seek
reimbursement from sponsors for the
value of federal means-tested public
benefits provided to sponsored
applicants.
(5) An estimate of the total number of
respondents and the amount of time
estimated for an average respondent to
respond: The estimated total number of
respondents for the information
collection G–1552 is 324,737 and the
estimated hour burden per response is
0.042 hours.
(6) An estimate of the total public
burden (in hours) associated with the
collection: The total estimated annual
hour burden associated with this
collection is 13,639 hours.
VerDate Sep<11>2014
(7) An estimate of the total public
burden (in cost) associated with the
collection: The estimated total annual
cost burden associated with this
collection of information is $0. This
collection does not impose any costs on
the responding public.
In accordance with the
Paperwork Reduction Act of 1995, we,
the U.S. Geological Survey (USGS) are
proposing to renew an information
collection.
DATES: Interested persons are invited to
submit comments on or before
November 17, 2020.
ADDRESSES: Send your comments on
this information collection request (ICR)
by mail to U.S. Geological Survey,
Information Collections Officer, 12201
Sunrise Valley Drive, MS 159, Reston,
VA 20192; or by email to gs-info_
collections@usgs.gov. Please reference
OMB Control Number 1028–0048 in the
subject line of your comments.
FOR FURTHER INFORMATION CONTACT: To
request additional information about
this ICR, contact David Wald by email
at wald@usgs.gov, or by telephone at
303–273–8441.
SUPPLEMENTARY INFORMATION: In
accordance with the Paperwork
Reduction Act of 1995, we provide the
general public and other Federal
agencies with an opportunity to
comment on new, proposed, revised,
and continuing collections of
information. This helps us assess the
impact of our information collection
requirements and minimize the public’s
reporting burden. It also helps the
public understand our information
collection requirements and provide the
requested data in the desired format.
SUMMARY:
PO 00000
Frm 00053
Fmt 4703
Sfmt 4703
58383
We are soliciting comments on the
proposed ICR that is described below.
We are especially interested in public
comment addressing the following
issues: (1) Is the collection necessary to
the proper functions of the USGS; (2)
will this information be processed and
used in a timely manner; (3) is the
estimate of burden accurate; (4) how
might the USGS enhance the quality,
utility, and clarity of the information to
be collected; and (5) how might the
USGS minimize the burden of this
collection on the respondents, including
through the use of information
technology.
Comments that you submit in
response to this notice are a matter of
public record. We will include or
summarize each comment in our request
to OMB to approve this ICR. Before
including your address, phone number,
email address, or other personal
identifying information in your
comment, you should be aware that
your entire comment—including your
personal identifying information—may
be made publicly available at any time.
While you can ask us in your comment
to withhold your personal identifying
information from public review, we
cannot guarantee that we will be able to
do so.
Abstract: The U.S. Geological Survey
(USGS) is required to collect, evaluate,
publish and distribute information
concerning earthquakes. Respondents
have an opportunity to voluntarily
supply information concerning the
effects of shaking from an earthquake—
on themselves, buildings, other manmade structures, and ground effects
such as faulting or landslides.
Respondents’ observations are
interpreted in terms of numbers that
measure the strength of shaking, and the
resulting numbers are displayed on
maps that are viewable from USGS
earthquake websites. Observations are
submitted via the Felt Report
questionnaire accessed from the USGS
Did You Feel It? Earthquake web pages,
and may be submitted via computer or
mobile phone. Respondents are asked to
provide information on the location to
which the report pertains. The locations
may, at the respondent’s option, be
given imprecisely (city-name or postal
Zip Code) or precisely (street address,
geographic coordinates, or current
location determined by the user’s
mobile phone). Low resolution maps of
shaking based on both precise and
imprecise observations are published for
all earthquakes for which observations
are submitted. For earthquakes felt by
many respondents, the observations that
are associated with more precise
locations are used in the preparation of
E:\FR\FM\18SEN1.SGM
18SEN1
58384
Federal Register / Vol. 85, No. 182 / Friday, September 18, 2020 / Notices
higher resolution maps of earthquake
shaking.
We will protect information from
respondents considered proprietary
under the Freedom of Information Act
(5 U.S.C. 552) and implementing
regulations (43 CFR part 2), and under
regulations at 30 CFR 250.197, ‘‘Data
and information to be made available to
the public or for limited inspection.’’
Responses are voluntary. No questions
of a ‘‘sensitive’’ nature are asked. We
will release data collected on these
forms only in formats that do not
include proprietary information
volunteered by respondents. This
collection is scheduled to expire on
June 30, 2021.
Title of Collection: Did You Feel It?
Earthquake Questionnaire.
OMB Control Number: 1028–0048.
Form Number: None.
Type of Review: Extension of a
currently approved collection.
Respondents/Affected Public: General
Public.
Total Estimated Number of Annual
Respondents: 200,000.
Total Estimated Number of Annual
Responses: 300,000.
Estimated Completion Time per
Response: 3 minutes on average.
Total Estimated Number of Annual
Burden Hours: 15,000.
Respondent’s Obligation: Voluntary.
Frequency of Collection: On occasion,
after an earthquake.
Total Estimated Annual Non-hour
Burden Cost: $0.00.
An agency may not conduct or
sponsor and a person is not required to
respond to a collection of information
unless it displays a currently valid OMB
control number.
The authority for this action is the
Paperwork Reduction Act of 1995 (44
U.S.C. 3501 et seq.).
Jill McCarthy,
Geologic Hazards Science Center, Director.
[FR Doc. 2020–20630 Filed 9–17–20; 8:45 am]
BILLING CODE 4338–11–P
INTERNATIONAL TRADE
COMMISSION
jbell on DSKJLSW7X2PROD with NOTICES
[Investigation Nos. 701–TA–637 and 731–
TA–1471 (Final)]
Large Vertical Shaft Engines From
China; Scheduling of the Final Phase
of Countervailing and Anti-Dumping
Duty Investigations
United States International
Trade Commission.
ACTION: Notice.
AGENCY:
The Commission hereby gives
notice of the scheduling of the final
SUMMARY:
VerDate Sep<11>2014
19:15 Sep 17, 2020
Jkt 250001
phase of antidumping and
countervailing duty investigation Nos.
701–TA–637 and 731–TA–1471 (Final)
pursuant to the Tariff Act of 1930 (‘‘the
Act’’) to determine whether an industry
in the United States is materially
injured or threatened with material
injury, or the establishment of an
industry in the United States is
materially retarded, by reason of
imports of large vertical shaft engines
from China, provided for in subheadings
8407.90.10, 8407.90.90, and 8409.91.99
of the Harmonized Tariff Schedule of
the United States, preliminarily
determined by the Department of
Commerce (‘‘Commerce’’) to be
subsidized and sold at less-than-fairvalue.
DATES: August 19, 2020.
FOR FURTHER INFORMATION CONTACT:
Charlie Cummings (202–708–1666),
Office of Investigations, U.S.
International Trade Commission, 500 E
Street SW, Washington, DC 20436.
Hearing-impaired persons can obtain
information on this matter by contacting
the Commission’s TDD terminal on 202–
205–1810. Persons with mobility
impairments who will need special
assistance in gaining access to the
Commission should contact the Office
of the Secretary at 202–205–2000.
General information concerning the
Commission may also be obtained by
accessing its internet server (https://
www.usitc.gov). The public record for
these investigations may be viewed on
the Commission’s electronic docket
(EDIS) at https://edis.usitc.gov.
SUPPLEMENTARY INFORMATION:
Scope.— For purposes of these
investigations, Commerce has defined
the subject merchandise as ‘‘sparkignited, non-road, vertical shaft engines,
whether finished or unfinished, whether
assembled or unassembled, primarily
for riding lawn mowers and zero-tum
radius lawn mowers. Engines meeting
this physical description may also be for
other non-hand-held outdoor power
equipment such as, including but not
limited to, tow-behind brush mowers,
grinders, and vertical shaft generators.
The subject engines are spark ignition,
single or multiple cylinder, air cooled,
internal combustion engines with
vertical power take off shafts with a
minimum displacement of 225 cubic
centimeters (cc) and a maximum
displacement of 999cc. Typically,
engines with displacements of this size
generate gross power of between 6.7
kilowatts (kw) to 42 kw.
Engines covered by this scope
normally must comply with and be
certified under Environmental
Protection Agency (EPA) air pollution
PO 00000
Frm 00054
Fmt 4703
Sfmt 4703
controls title 40, chapter I, subchapter
U, part 1054 of the Code of Federal
Regulations standards for small nonroad spark-ignition engines and
equipment. Engines that otherwise meet
the physical description of the scope but
are not certified under 40 CFR part 1054
and are not certified under other parts
of subchapter U of the EPA air pollution
controls are not excluded from the
scope of this proceeding. Engines that
may be certified under both 40 CFR part
1054 as well as other parts of subchapter
U remain subject to the scope of these
proceedings.
For purposes of these investigations,
an unfinished engine covers at a
minimum a sub-assembly comprised of,
but not limited to, the following
components: Crankcase, crankshaft,
camshaft, piston(s), and connecting
rod(s). Importation of these components
together, whether assembled or
unassembled, and whether or not
accompanied by additional components
such as an oil pan, manifold, cylinder
head(s), valve train, or valve cover(s),
constitutes an unfinished engine for
purposes of these investigations. The
inclusion of other products such as
spark plugs fitted into the cylinder head
or electrical devices (e.g., ignition
modules, ignition coils) for
synchronizing with the motor to supply
tension current does not remove the
product from the scope. The inclusion
of any other components not identified
as comprising the unfinished engine
subassembly in a third country does not
remove the engine from the scope.’’
Background.—The final phase of
these investigations is being scheduled
pursuant to sections 705(b) and 731(b)
of the Tariff Act of 1930 (19 U.S.C.
1671d(b) and 1673d(b)), as a result of
affirmative preliminary determinations
by Commerce that certain benefits
which constitute subsidies within the
meaning of § 703 of the Act (19 U.S.C.
1671b) are being provided to
manufacturers, producers, or exporters
in China of large vertical shaft engines,
and that such products are being sold in
the United States at less than fair value
within the meaning of § 733 of the Act
(19 U.S.C. 1673b). The investigations
were requested in petitions filed on
January 15, 2020, by the Coalition of
American Vertical Engine Producers
(Kohler Co., Kohler, Wisconsin, and
Briggs & Stratton Corporation,
Wauwatosa, Wisconsin).
For further information concerning
the conduct of this phase of the
investigations, hearing procedures, and
rules of general application, consult the
Commission’s Rules of Practice and
Procedure, part 201, subparts A and B
E:\FR\FM\18SEN1.SGM
18SEN1
File Type | application/pdf |
File Modified | 2020-09-18 |
File Created | 2020-09-18 |