Form 5900-339 Highway Motorcycle HC+NOx Average Exhaust Emissions

On-Highway Motorcycle Certification and Compliance Program (Renewal)

5900-339.xlsx

On-Highway Motorcycle Certification and Compliance Program

OMB: 2060-0710

Document [xlsx]
Download: xlsx | pdf

Overview

Pre-MY Report
Final MY Report
Instructions
Agency Use Only


Sheet 1: Pre-MY Report


United States

Environmental Protection Agency

Office of Air and Radiation, Office of Transportation and Air Quality












Highway Motorcycle HC+NOx Average Exhaust Emissions Model Year Report

Version Number: 1.0 Last Updated: September 2014












Pre-Model Year Average Exhaust Emissions Report




















Manufacturer's Name:

Averaging Provisions (40 CFR 86, Subpart E, § 86.449)

EPA ID:




Submitter's Name



Phone #:



Email:












Standards (40 CFR 86, Subpart E, § 86.410 Table E2006-2 and § 86.449 Part 3a)
Emission Level must be AT or BELOW the applicable standard; FEL must be AT or BELOW the FEL CAP.


Model Year:
Class:
Class Model Year FEL CAP (g/km)
HC+NOx
Emission Standard (g/km)
HC+NOx












IA, IB, II 2006 and later 5.0 1.4


Unrounded Value Rounded Value
III 2010 and later 2.5 0.8

Pre-Model Year
Average Emission Level
































Engine Family Name FEL (Preliminary)
(g/km)
Projected Production Volume Pre-MY
(FEL)i x (UL)i x (Production)i
Pre-MY
(Production)i x (UL)i
Pre-MY Notes



















































































































































































































































































































































































































Total: 0.0 0.0
















Paperwork Reduction Act Notice





The public reporting and recordkeeping burden for this collection of information is estimated to average 6 hours per response. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the Director, Collection Strategies Division, U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.
OMB No. 2060-0104



Approval Expires on



9/30/2016



EPA Form 5900-339



























































































Sheet 2: Final MY Report


United States

Environmental Protection Agency

Office of Air and Radiation, Office of Transportation and Air Quality












Highway Motorcycle HC+NOx Average Exhaust Emissions Model Year Report

Version Number: 1.0 Last Updated: September 2014












Final Model Year Average Exhaust Emissions Report




















Manufacturer's Name:

Averaging Provisions (40 CFR 86, Subpart E, § 86.449)

EPA ID:




Submitter's Name



Phone #:



Email:












Standards (40 CFR 86, Subpart E, § 86.410 Table E2006-2 and § 86.449 Part 3a)
Emission Level must be AT or BELOW the applicable standard; FEL must be AT or BELOW the FEL CAP.


Model Year:
Class:
Class Model Year FEL CAP (g/km)
HC+NOx
Emission Standard (g/km)
HC+NOx












IA, IB, II 2006 and later 5.0 1.4


Unrounded Value Rounded Value
III 2010 and later 2.5 0.8

Final Model Year
Average Emission Level





















NOTE:
List an engine family repeatedly in the form, if the FEL was revised during the model year. Each FEL (and the associated production volume) must be displayed as a unique line item.
Ref: 40 CFR 86.449(I)(3)


Engine Family Name Did FEL Change During MY? FEL (Certified)
(g/km)
Final MY
U.S. Production Volume
Final MY
(FEL)i x (UL)i x (Production)i
Final MY
(Production)i x (UL)i
Final MY Notes





































































































































































































































































































































































































































































Total: 0 0.0 0.0















Paperwork Reduction Act Notice
OMB No. 2060-0104


The public reporting and recordkeeping burden for this collection of information is estimated to average 6 hours per response. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the Director, Collection Strategies Division, U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.
Approval Expires on



9/30/2016



EPA Form 5900-339

































































































Sheet 3: Instructions


United States

Environmental Protection Agency

Office of Air and Radiation, Office of Transportation and Air Quality












Highway Motorcycle HC+NOx Average Exhaust Emissions Model Year Report

Version Number: 1.0 Last Updated: September 2014












Instructions




















I. About
In order to help streamline and standardize the process by which manufacturers submit information related to averaging provisions, EPA has created Excel-based reporting templates. Manufacturers subject to the Highway motorcycle vehicle or engine standards under 40 CFR Part 86 may use this template to report their preliminary and final results in accordance with §86.449(c)(2) and (c)(3), respectively (the Average Emission Level is calculated in accordance with §86.449(d)(1)). The template is structured such that data for only one Class may be entered. If you are submitting data for more than one Class, please submit separate files (one for each unique Class and MY).


II. General Information
Before entering data, it is important to ensure that the Excel file is set up to automatically calculate the data. To ensure that the data are calculated immediately upon entry, go to the Formulas tab and click on Calculations Options. In this window, the option "Automatic" should be selected. Note that the drag and drop option should not be used to copy or move data entered in the worksheet since doing so will change how the cells are referenced in the formulas and may lead to erroneous calculations. These worksheets are protected and as a result you may only enter data in the unlocked cells (i.e., the non-shaded cells). Fields that are automatically calculated (and therefore, are also locked), are shaded. This Excel file contains two worksheets that allow for entering engine family data: Pre-MY Report and Final MY  Report.


III. Entering Data
The following fields are in the Pre-MY Report and Final MY Report worksheets:
● Manufacturer's Name - In the Pre-MY Report worksheet, provide the full name of the manufacturer. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● EPA ID - In the Pre-MY Report worksheet, provide the three-character code assigned by the EPA to the manufacturer. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● Submitter's Name - In the Pre-MY Report worksheet, provide the name of the person submitting the report. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● Phone Number - In the Pre-MY Report worksheet, provide the phone number of the person submitting the report. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● Email Address - In the Pre-MY Report worksheet, provide the email address of the person submitting the report. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● Model Year - In the Pre-MY Report worksheet, enter the relevant model year for the averaging provisions report within the Pre-MY Report worksheet. The entry will be populated in the corresponding cell within the Final MY Report worksheet.
● Class - In the Pre-MY Report worksheet, select the vehicle's class from the drop-down menu (IA, IB, II or III). The selected value will be automatically populated in the Final MY Report worksheet.
● Engine Family Name - In the Pre-MY or Final MY Report worksheets, provide the twelve-character name of the Engine Family being certified.
● FEL (Preliminary) (g/km) - In the Pre-MY worksheet, enter the Family Emission Limit that was proposed for the Engine Family.
● Projected MY U.S. Production Volume - In the Pre-MY Report worksheet, provide the projected or final number of vehicles in the engine family.
● Final MY U.S. Production Volume - In the Final MY Report worksheet, provide the projected or final number of vehicles in the engine family.
● Did Initial MY FEL Values Change? - In the Final MY Report worksheet, select Yes or No from the drop-down menu whether the final MY FEL differs from the initial MY FEL value. Note that if the FEL changed during the MY, separately line items should be entered for the engine family to reflect the FEL both before and after the change (and the associated production for each).


● FEL (Certified) (g/km) - In the Final MY Report worksheet, provide the actual family emission limit to which the engine family is certified. As stated above, if the FEL changed during the MY for a particularly engine family, separate line items should be entered for that engine family showing the relevant FEL and the associated production.
● U.S. Production Volume - In the Final MY Report worksheet, provide the actual MY production volume of vehicles in the engine family.
● Notes - Use this space to provide any additional notes.













Paperwork Reduction Act Notice
OMB No. 2060-0104


The public reporting and recordkeeping burden for this collection of information is estimated to average 6 hours per response. Send comments on the Agency's need for this information, the accuracy of the provided burden estimates, and any suggested methods for minimizing respondent burden, including through the use of automated collection techniques to the Director, Collection Strategies Division, U.S. Environmental Protection Agency (2822T), 1200 Pennsylvania Ave., NW, Washington, D.C. 20460. Include the OMB control number in any correspondence. Do not send the completed form to this address.
Approval Expires on



9/30/2016



EPA Form 5900-339































Sheet 4: Agency Use Only

Manufacturer's Name EPA ID Submitter's Name Phone Number xxx-xxx-xxxx Email Address Model Year Class Pre-Model Year Average Emission Level Final Model Year Average Emission Level
0 0 0 0 0 0 0
0









Engine Family Name Preliminary FEL (g/km) Projected Production Volume Pre-MY Notes Did Preliminary FEL Values Change? Certified FEL (g/km) Actual Production Volume Final MY Notes
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0
File Typeapplication/vnd.openxmlformats-officedocument.spreadsheetml.sheet
File Modified0000-00-00
File Created0000-00-00

© 2024 OMB.report | Privacy Policy