Form 20-1-4213 U.S. producers' questionnaire

OMB No. 3117-0016/USITC No. 20-1-4213; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)

U.S. PRODUCERS’ QUESTIONNAIRE
SMALL VERTICAL SHAFT ENGINES FROM CHINA
This questionnaire must be received by the Commission by April 1, 2020
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping duty investigations concerning small vertical shaft engines from
China (Inv. No. 701-TA-643 and 731-TA-1493 (Preliminary)). The information requested in the questionnaire is requested
under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result
in a subpoena or other order to compel the submission of records or information in your firm’s possession (19 U.S.C. §
1333(a)).

Name of firm
Address
City

State

Zip Code

Website
Has your firm produced small vertical shaft engines (as defined on next page) at any time since January 1, 2017?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: SMENG)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official

Signature

Title of Authorized Official

Phone

Date

Email address

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 2

PART I.—GENERAL INFORMATION
Background.—These proceedings were instituted in response to petitions filed on March 18, 2020, by
Briggs & Stratton Corporation, Wauwatosa, Wisconsin. Countervailing and/or antidumping duties may
be assessed on the subject imports as a result of these proceedings if the Commission makes an
affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce (“Commerce”) makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available at:
https://www.usitc.gov/investigations/701731/2020/small_vertical_shaft_engines_china/preliminary.htm.
Small vertical shaft engines covered by these investigations consist of spark-ignited, non-road, vertical
shaft engines, whether finished or unfinished, whether assembled or unassembled, whether mounted
or unmounted, primarily for walk-behind lawn mowers. Engines meeting this physical description may
also be for other non-hand-held outdoor power equipment, including but not limited to, pressure
washers. The subject engines are spark ignition, single-cylinder, air cooled, internal combustion engines
with vertical power take off shafts with a minimum displacement of 99 cubic centimeters (“cc”) and a
maximum displacement of 225cc. Typically, engines with displacements of this size generate gross
power of between 1.95 kilowatts (“kw”) to 4.75 kw.
Engines covered by this scope normally must comply with and be certified under Environmental
Protection Agency (EPA) air pollution controls title 40, chapter I, subchapter U, part 1054 of the Code of
Federal Regulations standards for small non-road spark-ignition engines and equipment. Engines that
otherwise meet the physical description of the scope but are not certified under 40 CFR part 1054 and
are not certified under other parts of subchapter U of the EPA air pollution controls are not excluded
from the scope of these proceedings. Engines that may be certified under both 40 CFR part 1054 as well
as other parts of subchapter U remain subject to the scope of these proceedings.
Certain small vertical shaft engines, whether or not mounted on non-hand-held outdoor power
equipment, including but not limited to walk-behind lawn mowers and pressure washers, are included in
the scope. However, if a subject engine is imported mounted on such equipment, only the engine is
covered by the scope. Subject merchandise includes certain small vertical shaft engines produced in the
subject country whether mounted on outdoor power equipment in the subject country or in a third
country. Subject engines are covered whether or not they are accompanied by other parts.
For purposes of these investigations, an unfinished engine covers at a minimum a sub-assembly
comprised of, but not limited to, the following components: crankcase, crankshaft, camshaft, pistons(s),
and connecting rod(s). Importation of these components together, whether assembled or unassembled,
and whether or not accompanied by additional components such as an oil pan, manifold, cylinder
head(s), valve train, or valve cover(s), constitutes an unfinished engine for purposes of these
investigations. The inclusion of other products such as spark plugs fitted into the cylinder head or
electrical devices (e.g., ignition modules, ignition coils) for synchronizing with the motor to supply
tension current does not remove the product from the scope. The inclusion of any other components
not identified as comprising the unfinished engine subassembly in a third-country does not remove the
engine from the scope.
The engines subject to these investigations are predominantly classified in the Harmonized Tariff
Schedule of the United States (HTSUS) at subheading 8407.90.1010. The engine subassemblies that are
subject to these investigations enter under HTSUS 8409.91.9990. The mounted engines that are subject
to these investigations enter under HTSUS 8433.11.0050, 8433.11.0060, and 8424.30.9000. Engines
subject to these investigations may also enter under HTSUS 8407.90.1020, 8407.90.9040, and

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 3

8407.90.9060. The HTSUS subheadings are provided for convenience and customs purposes only, and
the written description of the merchandise under investigation is dispositive.
Reporting of information.--If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals. In addition, if your firm is a U.S. producer, the information you
provide on your production and imports of small vertical shaft engines and your responses to the
questions in Part I of the producer questionnaire will be provided to the U.S. Department of Commerce,
upon its request, for use in connection with (and only in connection with) its requirement pursuant to
section 702(c)(4)/732(c)(4) of the Act (19 U.S.C. § 1671a(c)(4)/1673a(c)(4)) to make a determination
concerning the extent of industry support for the petitions requesting this proceeding. Any information
provided to Commerce will be transmitted under the confidentiality and release guidelines set forth
above. Your response to these questions constitutes your consent that such information be provided to
Commerce under the conditions described above.
D-GRIDS tool.--The Commission has a tool that firms can use to move data from their own MS Excel
compilation files into self-contained data tables within this MS Word questionnaire, thereby reducing
the amount of cell-by-cell data entry that would be required to complete this form. This tool is a macroenabled MS Excel file available for download from the Commission's generic questionnaires webpage
(https://www.usitc.gov/trade_remedy/question.htm) called the "D-GRIDs tool." Use of this tool to help
your firm complete this questionnaire is optional. Firms opting to use the D-GRIDs tool to populate their
data into this questionnaire will need the D-GRIDs specification sheet PDF file specific to this proceeding
(available on the case page which is linked under the "Background" above) which includes the necessary
references relating to this questionnaire, as well as the macro-enable MS Excel D-GRIDs tool itself from
the generic questionnaires page. More detailed instructions on how to use the D-GRIDs tool are
available within the D-GRIDs tool itself.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
I-1a.

Page 4

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours

Dollars

The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
50 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-1b.

TAA information release.--In the event that the U.S. International Trade Commission (USITC)
makes an affirmative final determination in this proceeding, do you consent to the USITC's
release of your contact information (company name, address, contact person, contact person’s
title, telephone number, email address) appearing on the front page of this questionnaire to the
Departments of Commerce, Labor, and Agriculture, as applicable, so that your firm and its
workers can be made eligible for benefits under the Trade Adjustment Assistance program?
Yes

No

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
I-2a.

Page 5

Establishments covered.--Provide the city, state, zip code, and brief description of each
establishment covered by this questionnaire. Firms operating more than one establishment
should combine the data for all establishments into a single report.
“Establishment”--Each facility of a firm involved in the production of small vertical shaft
engines, including auxiliary facilities operated in conjunction with (whether or not physically
separate from) such facilities.
Establishments
covered1

City, State

Zip (5 digit)

Description

1
2
3
4
5
6
1

Additional discussion on establishments consolidated in this questionnaire:

.

I-2b.

Stock symbol information.-- If your firm or parent firm is publicly traded, please specify the
stock exchange and trading symbol:
.

I-2c.

External counsel.-- If your firm or parent firm is represented by external counsel in relation to
this proceeding, please specify the name of the law firm and the lead attorney(s).
Law firm:
Lead attorney(s):

I-3.

Petitioner status.--Is your firm a petitioner in this proceeding or a member firm of the
petitioning entity?
No

I-4.

Yes

Petition support.--Does your firm support or oppose the petitions?
Country
AD China
CVD China

Support

Oppose

Take no position

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
I-5.

Ownership.--Is your firm owned, in whole or in part, by any other firm?
No

Firm name

I-6.

Page 6

Yes--List the following information, relating to the ultimate parent/owner.

Country

Extent of
ownership
(percent)

Related importers/exporters.--Does your firm have any related firms, either domestic or
foreign, that are engaged in importing small vertical shaft engines from China into the United
States or that are engaged in exporting small vertical shaft engines from China to the United
States?
No
Firm name

Yes--List the following information.
Country

Affiliation

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
I-7.

Page 7

Related producers.--Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of small vertical shaft engines?
No
Firm name

Yes--List the following information.
Country

Affiliation

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 8

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Charles Cummings (202-7081666, Charles.Cummings@usitc.gov). Supply all data requested on a calendar-year basis.
II-1.

Contact information.--Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in Part II.
Name
Title
Email
Telephone

II-2.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of small vertical shaft engines since January 1, 2017.
(check as many as appropriate)
plant openings
plant closings
Relocations
Expansions
Acquisitions
Consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)

(If checked, please describe; leave blank if not applicable)

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-3a.

Page 9

Production using same machinery.--Please report your firm’s production of products using the
same equipment, machinery, or employees as used to produce small vertical shaft engines, and
the combined production capacity on this shared equipment, machinery, or employees in the
periods indicated.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
Note.--If your firm does not produce any out-of-scope merchandise on the same machinery and
equipment as scope merchandise then the "overall production capacity" numbers reported in
this question should be exactly equal to the "average production capacity" numbers reported in
question II-7. If, however, your firm does produce out-of-scope merchandise using the same
machinery and equipment as scope merchandise, then the "average production capacity"
reported in question II-7 should exclude the portion of "overall production capacity" that was
used to produce this out-of-scope merchandise.
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
Quantity (in units)
Calendar years
Item

Overall production capacity

2017

Production of:
Small Vertical Shaft Engines2
Other products

2

II-7.
3

2019

0

0

0

0

0

0

3

Total production using same
machinery or workers
1

2018

1

Data reported for capacity (first line) should be greater than data reported for total production (last line).
Data entered for production of small vertical shaft engines will populate here once reported in question
Please identify these products:

II-3b.

.

Operating parameters.--The production capacity reported in II-3a is based on the following
operating paramaters:
Hours per week

Weeks per year

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 10

II-3c.

Capacity calculation.--Please describe the methodology used to calculate overall production
capacity reported in II-3a, and explain any changes in reported capacity.

II-3d.

Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.

II-4.

Product shifting.—
(a)

Is your firm able to switch production (capacity) between small vertical shaft engines and
other products using the same equipment and/or labor?

No

(b)

II-5.

Yes

If yes—(i.e., have produced other products or are able to produce other
products) Please identify other actual or potential products.

Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.

Tolling.--Since January 1, 2017, has your firm been involved in a toll agreement regarding the
production of small vertical shaft engines?
“Toll agreement”--Agreement between two firms whereby the first firm furnishes the raw
materials and the second firm uses the raw materials to produce a product that it then returns
to the first firm with a charge for processing costs, overhead, etc.

No

Yes

If yes--Please describe the toll arrangement(s) and name the firm(s)
involved.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-6.

Page 11

Foreign trade zones.-Firm's FTZ operations.--Does your firm produce small vertical shaft engines in and/or
admit small vertical shaft engines into a foreign trade zone (FTZ)?

(a)

“Foreign trade zone” is a designated location in the United States where firms utilize
special procedures that allow delayed or reduced customs duty payments on foreign
merchandise. A foreign trade zone must be designated as such pursuant to the rules
and procedures set forth in the Foreign-Trade Zones Act.

No

Yes

If yes--Describe the nature of your firm’s operations in FTZs and identify
the specific FTZ site(s).

Other firms' FTZ operations.--To your knowledge, do any firms in the United States
import small vertical shaft engines into a foreign trade zone (FTZ) for use in distribution
of small vertical shaft engines and/or the production of downstream articles?

(b)

No

Yes

If yes--Identify the firms and the FTZs.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-7.

Page 12

Production, shipment, and inventory data.--Report your firm’s production capacity, production,
shipments, and inventories related to the production of small vertical shaft engines in its U.S.
establishment(s) during the specified periods.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
“Commercial U.S. shipments” –Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” – Product consumed internally by your firm. Such transactions are
valued at fair market value.
“Transfers to related firms” –Shipments made to related firms. Such transactions are valued at
fair market value.
“Related firm” –A firm that your firm solely or jointly owned, managed, or otherwise controlled;
a firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm
that was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or
jointly owned, managed, or otherwise controlled your firm.
“Export shipments” –Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories”— Finished goods inventory, not raw materials or work-in-progress.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the trade data, as Commission staff may contact your firm regarding questions on the
trade data. The Commission may also request that your company submit copies of the supporting
documents/records (such as production and sales schedules, inventory records, etc.) used to compile
these data.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-7.

Page 13

Production, shipment, and inventory data.--Continued
Quantity (in units) and value (in $1,000)
Calendar years
Item

2017

2018

2019

Average production capacity (quantity) (A)
1

Beginning-of-period inventories (quantity)
(B)
Production (quantity) (C)
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption:2
Quantity (F)
Value2 (G)
Transfers to related firms:2
Quantity (H)
Value2 (I)
Export shipments:3
Quantity (J)
Value (K)
End-of-period inventories (quantity) (L)
The production capacity reported is based on operating
hours per week,
weeks per year. Please describe
the methodology used to calculate production capacity, and explain any changes in reported capacity
.
2
Internal consumption and transfers to related firms must be valued at fair market value. If your firm uses a different
basis for valuing these transactions in your records, please specify that basis (e.g., cost, cost plus, etc.):
. However,
the data provided above in this table should be based on fair market value.
3
Identify your firm’s principal export markets:
.
1

RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported for the end-ofperiod inventories (i.e., line L) should be equal to the beginning-of-period inventories (i.e., line B), plus production
(i.e., line C), less total shipments (i.e., lines D, F, H, and J). Please ensure that any differences are not due to data
entry errors in completing this form, but rather reflect your firm’s actual records; and, also provide explanations
for any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.
Calendar years
Reconciliation
B + C – D – F – H – J – L = should equal zero
("0") or provide an explanation.1

2017

2018
0

2019
0

Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
1

0

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-8.

Page 14

Channels of distribution.--Report your firm’s U.S. shipments (i.e. inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) by channel of distribution.
Quantity (in units)
Calendar years
Item

2017

2018

2019

Channels of distribution:
U.S. shipments:
To distributors or dealers (M)
To OEMs (N)
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution (i.e.,
lines M and N) in each time period equal the quantity reported for U.S. shipments (i.e., line D, F, H) in each time
period. If the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Calendar years
Reconciliation
M + N – D - F– H = zero ("0"), if not
revise.

2017

2018
0

2019
0

0

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-9.

Page 15

U.S. shipments by level of processing.--Report your firm’s U.S. shipments (i.e. inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) by level of
processing during the specified periods.
Quantity (in units)
Calendar years
Item

2017

2018

2019

U.S. Shipments:1
Unfinished, unmounted:
Quantity (O)
Value (P)
Finished, unmounted:
Quantity (Q)
Value (R)
Finished, mounted:
Quantity (S)
Value (T)
1 Please identify the physical characteristics, functions, and markets for unfinished and finished small vertical shaft
engines, respectively.
.

RECONCILIATION OF U.S. SHIPMENTS BY LEVEL OF PROCESSING. Please ensure that the quantities reported for
U.S. shipments in this question (i.e., lines O through R) in each time period equal the quantities and values
reported for U.S. shipments reported in question II-7 (i.e., lines D through I) in each time period. If the
calculated fields below return values other than zero (i.e., “0”), the data reported must be revised prior to
submission to the Commission.
Calendar years
Reconciliation

2017

2018

2019

Quantity: O + Q + S – D – F – H

0

0

0

Value: P + R+ T – D – E – G – I

0

0

0

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-10.

Page 16

Employment data.--Report your firm’s employment-related data related to the production of
small vertical shaft engines and provide an explanation for any trends in these data.
“Production and Related Workers” (PRWs) includes working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production
for plant’s own use (e.g., power plant), recordkeeping, and other services closely associated
with the above production operations. Average number employed may be computed by adding
the number of employees, both full time and part time, for the 12 pay periods ending closest to
the 15th of the month and divide that total by 12.
“Hours worked” includes time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight time hours.
“Wages paid” –Total wages paid before deductions of any kind (e.g., withholding taxes, old-age
and unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid
directly by your firm for overtime, holidays, vacations, and sick leave.
Calendar years
Item

2017

2018

2019

Average number of PRWs (number)
Hours worked by PRWs (1,000 hours)
Wages paid to PRWs ($1,000)
Explanation of trends:

II-11.

Related firms.--If your firm reported transfers to related firms in question II-7, please identify
the firm(s) and indicate the nature of the relationship between your firm and the related firms
(e.g., joint venture, wholly owned subsidiary), whether the transfers were priced at market
value or by a non-market formula, whether your firm retained marketing rights to all transfers,
and whether the related firms also processed inputs from sources other than your firm.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
II-12.

Page 17

Purchases.--Has your firm purchased small vertical shaft engines produced in the United States
or in other countries since January 1, 2017? (Do not include imports for which your firm was the
importer of record. These should be reported in an importer questionnaire.)
“Purchase” – A transaction to buy product from a U.S. corporate entity such as another U.S.
producer, a U.S. distributor, or a U.S. firm that has directly imported the product.
“Import” –A transaction to buy from a foreign supplier where your firm is the importer of
record.

No

Yes

If yes--Report such purchases in the table below and explain the reasons
for your firms' purchases.

Note: If your firm served as the importer of record for any purchases from foreign suppliers,
either for your own account or as a service for another entity, those purchases are to be
considered "imports" not "purchases" and should not be included in the table below
(Quantity in units)
Calendar years
Item

2017

2018

2019

Purchases from U.S. importers of
small vertical shaft engines from—
China
1

All other sources
Purchases from domestic producers2
Purchases from other sources3
Please list the name of the importer(s) from which your firm purchased this product. If your firm’s import
suppliers differ by source, please identify the source for each listed supplier:
.
2
Please list the name of the U.S. producer(s) from which your firm purchased this product:
.
3
Please list the name of the firm(s) from which your firm purchased this product:
.
1

II-13.

Imports.--Since January 1, 2017, has your firm imported small vertical shaft engines?
No

Yes
If yes--COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE

II-14.

Other explanations.--If your firm would like to further explain a response to a question in Part II
for which a narrative box was not provided, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 18

PART III.--FINANCIAL INFORMATION
Address questions on this part of the questionnaire to Jennifer Brinckhaus (202-205-3188,
jennifer.brinckhaus@usitc.gov).
III-1.

Contact information.--Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in Part III.
Name
Title
Email
Telephone

III-2.

Accounting system.—Please provide the following information on your firm’s financial
accounting system.
A.

When does your firm’s fiscal year end (month and day)?
If your firm’s fiscal year changed during the data-collection period, explain
below:

B.1.

Describe the lowest level of operations (e.g., plant, division, company-wide) for
which financial statements are prepared that include small vertical shaft
engines:

2.

Does your firm prepare profit/loss statements for small vertical shaft engines:
Yes
No
How often did your firm (or parent company) prepare financial statements
(including annual reports, 10Ks)? Please check relevant items below.
Audited,
unaudited,
annual reports,
10Ks,
10 Qs,
Monthly,
quarterly,
semi-annually,
annually
Accounting basis:
GAAP,
cash,
tax, or
other comprehensive
basis of accounting (specify)

3.

4.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the financial data, as Commission staff may contact your firm
regarding questions on the financial data. The Commission may also request that your company
submit copies of the supporting documents/records (financial statements, including internal
profit-and-loss statements for the division or product group that includes small vertical shaft
engines, as well as specific statements and worksheets) used to compile these data.

PLEASE NOTE: We are requesting all financial data on a calendar-year basis.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 19

III-3.

Cost accounting system.--Briefly describe your firm’s cost accounting system (e.g., standard
cost, job order cost, etc.).

III-4.

Allocation basis.--Briefly describe your firm’s allocation basis, if any, for COGS, SG&A, and
interest expense and other income and expenses.

III-5.

Product listing.--Please list the products your firm produced in the facilities in which your firm
produced small vertical shaft engines and provide the share of net sales accounted for by these
products in 2019.
Products
Small vertical shaft engines

Share of sales
%
%
%
%
%

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
III-6.

Inputs from related suppliers.--Does your firm purchase inputs (raw materials, labor, energy, or
any services) used in the production of small vertical shaft engines from any related suppliers
(e.g., inclusive of transactions between related firms, divisions and/or other components within
the same company)?
Yes--Continue to question III-7

III-7.

Page 20

No—Skip to question III-9a.

Inputs from related suppliers detailed.--Please identify the inputs used in the production of
small vertical shaft engines that your firm purchases from related suppliers and that are
reflected in question III-9a. For “Share of total COGS” please report this information by relevant
input for 2019. For “Input valuation” please describe the basis, as recorded in your company’s
own accounting system, of the purchase cost from the related supplier; e.g., the related
supplier’s actual cost, cost plus, negotiated transfer price to approximate fair market value.
Input

Related supplier

Share of total COGS in 2019

Input valuation as recorded in the firm’s accounting books and records

III-8.

Inputs purchased from related suppliers.--Please confirm that the inputs purchased from
related suppliers, as identified in III-7, are reported in III-9a (financial results on small vertical
shaft engines) in a manner consistent with your firm’s accounting books and records.

Yes

No

If no--In the space below, please report the valuation basis of inputs
purchased from related suppliers as reported in question III-9a.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 21

III-9a. Operations on small vertical shaft engines.--Report the revenue and related cost information
requested below on the small vertical shaft engines operations of your firm’s U.S.
establishment(s).1 Do not report resales of products. Note that internal consumption and
transfers to related firms must be valued at fair market value. Input purchases from related
suppliers should be consistent with and based on information in the firm’s accounting books and
records. If your firm was involved in tolling operations (either as the toller or as the tollee),
please contact Jennifer Brinckhaus at (202) 205-3188 before completing this section of the
questionnaire.
Quantity (in units) and value (in $1,000)
Calendar Year
Item

2017

2018

2019

Net sales quantities:
Commercial sales (“CS”)
2

Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
Total net sales quantities

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

Net sales values:
Commercial sales
2

Internal consumption
Transfers to related firms
Total net sales values
Cost of goods sold (COGS):
Raw materials

3

Direct labor
Other factory costs
Total COGS
Gross profit or (loss)
Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
All other expense items
All other income items
Net income or (loss) before income taxes
Depreciation/amortization included above
Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3 COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers.
1

2

Note --The table above contains calculations that will appear when you have entered data in the MS
Word form fields.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 22

III-9b. Financial data reconciliation.--The calculable line items from question III-9a (i.e., total net sales
quantities and values, total COGS, gross profit (or loss), total SG&A, and net income (or loss))
have been calculated from the data submitted in the other line items. Do the calculated fields
return the correct data according to your firm's financial records ignoring non-material
differences that may arise due to rounding?

Yes

III-9c.

No

If no--If the calculated fields do not show the correct data, please double
check the feeder data for data entry errors and revise. Also, check signs
accorded to the post operating income line items; the two expense line
items should report positive numbers (i.e., expenses are positive and
incomes or reversals are negative--instances of the latter should be rare in
those lines) while the income line item also in most instances should have
its value be a positive number (i.e., income is positive, expenses or reversals
are negative). If after reviewing and potentially revising the feeder data
your firm has provided, the differences between your records and the
calculated fields persist please identify and discuss the differences in the
space below.

Raw materials.--Please report the share of total raw material costs in 2019 (reported in III-9a)
for the following raw material inputs:

Input

Share of total
raw material
costs in 2019
(percent)

Procurement method
Primarily
produced by
your firm

Primarily
purchased by
your firm

Metal components (iron, steel, aluminum, etc.)
Plastic and rubber components
Other material inputs1
Total (should sum to 100 percent)

0.0

Please list any notable "other material inputs" not expressly identified above and provide the share of
the total raw material costs that they account for:
.
1

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 23

III-10. Nonrecurring items (charges and gains) included in the subject product financial results.--For
each calendar year, please specify all material (significant) nonrecurring items (charges and
gains) in the schedule below, the specific question III-9a line item where the nonrecurring items
are included, a brief description of the relevant nonrecurring items, and the associated values
(in $1,000), as reflected in question III-9a; i.e., if an aggregate nonrecurring item has been
allocated to question III-9a, only the allocated value amount included in question III-9a should
be reported in the schedule below. Note: The Commission’s objective here is to gather
information only on material (significant) nonrecurring items which impacted the reported
financial results of the subject product in question III-9a.
Calendar year
Item

2017

2018

2019

Value ($1,000)
Nonrecurring item 1
Nonrecurring item 2
Nonrecurring item 3
Nonrecurring item 4
Nonrecurring item 5
Nonrecurring item 6
Nonrecurring item 7
Nonrecurring item: In this table please provide a brief description of each nonrecurring item reported
above and indicate the specific line item in table III-9a where the nonrecurring item is classified.
Description of the
nonrecurring item
Nonrecurring item 1
Nonrecurring item 2
Nonrecurring item 3
Nonrecurring item 4
Nonrecurring item 5
Nonrecurring item 6
Nonrecurring item 7

Income statement classification of the
nonrecurring item

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 24

III-11. Classification of identified nonrecurring items (charges and gains) in the accounting books and
records of the company.--If non-recurring items were reported in question III-10 above, please
identify where your company recorded these items in your accounting books and records in the
normal course of business; i.e., just as responses to question III-10 identify where these items
are reported in question III-9a.

III-12. Asset values.--Report the total assets (i.e., both current and long-term assets) associated with
the production, warehousing, and sale of small vertical shaft engines. If your firm does not
maintain some or all of the specific asset information necessary to calculate total assets for
small vertical shaft engines in the normal course of business, please estimate this information
based upon a method (such as production, sales, or costs) that is consistent with relevant cost
allocations in question III-9a.
Note: Total assets should reflect total assets net of any accumulated depreciation and
allowances deducted.
Total assets should be allocated to the subject products if these assets are also related to other
products. Please provide a brief explanation if there are any substantial changes in total asset
value during the period; e.g., due to asset write-offs, revaluation, and major purchases.
Value (in $1,000)
Calendar year
Item
Total assets (net)
1

III-13.

Describe

2017

2018

2019

1

.

Capital expenditures and research and development expenses.--Report your firm’s capital
expenditures and research and development expenses for small vertical shaft engines.
Value (in $1,000)
Calendar year
Item
Capital expenditures

2017

2018

2019

1

Research and development
expenses2
Please describe the nature, focus, and significance of your firm’s capital expenditures on the subject product.
.
2
Please describe the nature, focus, and significance of your firm’s R&D expenses related to subject product.
.
1

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 25

III-14. Data consistency and reconciliation.--Please note that we are requesting your firm’s financial
data for questions III-9a, 12, and 13 on a calendar year basis. Please confirm that your firm
reported these data on a calendar-year basis:
Yes

No

If no, please explain.

Please note the quantities and values reported in question III-9a should reconcile with the data
reported in question II-7 (including export shipments).
RECONCILIATION OF TRADE VS FINANCIAL DATA.--Please ensure that the quantities and values reported
for total shipments in Part II equal the quantities and values reported for total net sales in Part III of this
questionnaire in each time period. If the calculated fields below return values other than zero (i.e., “0”),
please explain the discrepancy below.
Calendar year
Reconciliation

2017

2018

2019

Quantity: Trade data from question
II-7 (lines D, F, H, and J) less financial
total net sales quantity data from
question III-9a, = zero ("0").

0

0

0

Value: Trade data from question II-7
(lines E, G, I, and K) less financial
total net sales value data from
question III-9a, = zero ("0").

0

0

0

Do these data in question III-9a reconcile with data in question II-7?
Yes

No

If no, please explain.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 26

III-15. Effects of imports on investment.--Since January 1, 2017, has your firm experienced any actual
negative effects on its return on investment or the scale of capital investments as a result of
imports of small vertical shaft engines from China?
No

Yes

If yes, my firm has experienced actual negative effects as follows.

(check as many as appropriate)
Cancellation,
postponement, or
rejection of expansion
projects
Denial or rejection of
investment proposal
Reduction in the size of
capital investments
Return on specific
investments negatively
impacted
Other

(please describe)

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 27

III-16. Effects of imports on growth and development.--Since January 1, 2017, has your firm
experienced any actual negative effects on its growth, ability to raise capital, or existing
development and production efforts (including efforts to develop a derivative or more advanced
version of the product) as a result of imports of small vertical shaft engines from China?
No

Yes

If yes, my firm has experienced actual negative effects as follows.

(check as many as appropriate)

(please describe)

Rejection of bank loans
Lowering of credit rating
Problem related to the
issue of stocks or bonds
Ability to service debt
Other

III-17. Anticipated effects of imports.--Does your firm anticipate any negative effects due to imports of
small vertical shaft engines from China?
No

Yes

If yes, my firm anticipates negative effects as follows.

III-18. Other explanations.--If your firm would like to further explain a response to a question in Part III
for which a narrative box was not provided, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 28

PART IV.--PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Cindy Cohen (202-205-3230,
cindy.cohen@usitc.gov).
IV-1.

Contact information.--Please identify the individual that Commission staff may contact
regarding the confidential information submitted in Part IV.
Name
Title
Email
Telephone

PRICE DATA
IV-2.

This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. OEM customers since January 1, 2017 of the following products produced by
your firm.
Product 1: Vertical Shaft Engine, Air-Cooled, Single Cylinder, Carbureted, 125-140cc
Displacement, Unmounted
Product 2: Vertical Shaft Engine, Air-Cooled, Single Cylinder, Carbureted, 141-155cc
Displacement, Unmounted
Product 3: Vertical Shaft Engine, Air-Cooled, Single Cylinder, Carbureted, 156-170cc
Displacement, Unmounted

Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.-inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
IV-2a. During 2017-2019, did your firm produce and sell to unrelated U.S. OEM customers any of the
above listed products (or any products that were competitive with these products)?
Yes.--Please complete the following pricing data table as appropriate. Report sales
only to OEMs. Do not report sales of replacement engines.
No.--Skip to question IV-3.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 29

IV-2b. Price data.--Report below the quarterly price data1 for pricing products2 produced and sold to
OEMs by your firm.
Report data in units and actual dollars (not 1,000s).

Period of shipment
2017:
January-March
April-June
July-September
October-December
2018:
January-March
April-June
July-September
October-December
2019:
January-March
April-June
July-September
October-December

(Quantity in units, value in dollars)
Product 1
Product 2
Quantity
Value
Quantity
Value

Product 3
Quantity
Value

1 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods), f.o.b. your firm’s U.S. point of shipment.
2 Pricing product definitions are provided on the first page of Part IV.

Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 30

IV-2c. Price data checklist.--Please check that the pricing data in question IV-2(b) has been correctly
reported.
Are the price data reported above:

√ if Yes

In actual dollars (not $1,000)?
F.o.b. U.S. point of shipment (i.e., does not include U.S. transport costs)?
Net of all discounts and rebates, including any discounts/rebates to your
customers’ customers (e.g. lawn mower retailers)?
Have returns credited to the quarter in which the sale occurred?
Less than reported commercial shipments in question II-7 in each year?
Include only sales to OEMs (i.e., excluding aftermarket and retail sales)?
Exclude sales of engines mounted on lawn mowers or other machinery?
IV-2d. Pricing data methodology.--Please describe the method and the kinds of documents/records
that were used to compile your price data.

Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the price data, as Commission staff may contact your firm regarding questions on the
price data. The Commission may also request that your company submit copies of the supporting
documents/records (such as sales journal, invoices, etc.) used to compile these data.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 31

IV-3.

Price setting.-- How does your firm determine the prices that it charges for sales of small vertical
shaft engines? Briefly describe the price negotiation process and timeline, and when during the
process prices are finalized, and any differences in negotiations/price setting between OEMs
and other customers.

IV-4.

Discount policy.--Please indicate and describe your firm’s discount policies (check all that apply).
Annual
total
volume
discounts

Quantity
discounts

IV-5.

Other

Describe

Pricing terms.--On what basis are your firm’s prices of domestic small vertical shaft engines
usually quoted (check one)?
Delivered

IV-6.

No
discount
policy

F.o.b.

If f.o.b., specify point

Contract versus spot.--Approximately what share of your firm’s sales of its U.S.-produced small
vertical shaft engines in 2019 was on a (1) short-term contract basis, (2) annual contract basis,
(3) long-term contract basis, and (4) spot sales basis?

Item
Share of 2019
sales

Type of sale
Long-term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
more than 12
months)
months)

Short-term
contracts
(multiple
deliveries for
less than 12
months)
%

%

%

Total
(should
sum to
100.0%)

Spot sales
(for a single
delivery)
%

0.0

%

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
IV-7.

Page 32

Contract provisions.—

(a) Please fill out the table regarding your firm’s typical sales contracts for U.S.-produced small
vertical shaft engines (or check “not applicable” if your firm does not sell on a short-term,
annual and/or long-term contract basis).
Typical sales
contract provisions

Item

Average contract
duration

No. of
days

Price renegotiation
(during contract
period)

Yes

Fixed quantity
and/or price

Short-term contracts
(multiple deliveries
for less than 12
months)

Annual contracts
(multiple
deliveries for 12
months)

Long-term contracts
(multiple deliveries
for more than 12
months)

365

No
Quantity

Indexed to raw
material costs1

Price
Both
Yes
No

Not applicable
1

Please identify the indexes used:

.

(b) Briefly describe your firm’s contracts for small vertical shaft engines, including any differences
between contracts with OEMs and other customers.

IV-8.

Lead times.--What share of your firm’s sales is from inventory and produced to order and what
is the typical lead time between a customer’s order and the date of delivery for your firm’s sales
of its U.S.-produced small vertical shaft engines?
Source

Share of 2019 sales

From inventory

%

Produced to order

%

Total (should sum to 100.0%)

0.0

%

Lead time (Average
number of days)

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)
IV-9.

Page 33

Shipping information.-(a)

Who generally arranges the transportation to your firm’s customers’ locations?
Your firm
Purchaser (check one)

(b)

Indicate the approximate percentage of your firm’s sales of small vertical shaft engines
that are delivered the following distances from its production facility.
Distance from production facility

Share

Within 100 miles

%

101 to 1,000 miles

%

Over 1,000 miles

%

Total (should sum to 100.0%)

0.0

%

IV-10. Geographical shipments.--In which U.S. geographic market area(s) has your firm sold its U.S.produced small vertical shaft engines since January 1, 2017 (check all that apply)?
Geographic area

√ if applicable

Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
IV-11. Inland transportation costs.—What is the approximate percentage of the cost of U.S.-produced
small vertical shaft engines that is accounted for by U.S. inland transportation costs?
percent.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 34

IV-12. End uses.--List the end uses of the small vertical shaft engines that your firm manufactures. For
each end-use product, what percentage of the total cost is accounted for by small vertical shaft
engines and other inputs?
Share of total cost of end use product
accounted for by
Small vertical shaft
engines

End-use product

Total
(should sum to
100.0% across)

Other inputs

%

%

0.0 %

%

%

0.0 %

%

%

0.0 %

IV-13. Substitutes.--Can other products be substituted for small vertical shaft engines?
No

Yes--Please fill out the table.

End use in which this
substitute is used

Substitute

Have changes in the price of this substitute
affected the price for small vertical shaft
engines?
No Yes

Explanation

1.
2.
3.
IV-14. Demand trends.--Indicate how demand within the United States and outside of the United
States (if known) for small vertical shaft engines has changed since January 1, 2017. Explain any
trends and describe the principal factors that have affected these changes in demand.

Overall
increase

Market

Fluctuate
No
Overall
with no
change decrease clear trend

Explanation and factors

Within the United States
Outside the United States
IV-15. Product changes.--Have there been any significant changes in the product range, product mix,
or marketing of small vertical shaft engines since January 1, 2017?
No

Yes

If yes, please describe and quantify if possible.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 35

IV-16. Conditions of competition.-(a) Is the small vertical shaft engines market subject to business cycles (other than general
economy-wide conditions) and/or other conditions of competition distinctive to small
vertical shaft engines? If yes, describe.
Check all that apply.

Please describe.

No

Skip to question IV-17.

Yes-Business cycles (e.g.
seasonal business)
Yes-Other distinctive
conditions of competition
(b) If yes, have there been any changes in the business cycles or conditions of competition for
small vertical shaft engines since January 1, 2017?
No

Yes

If yes, describe.

IV-17. Supply constraints.--Has your firm refused, declined, or been unable to supply small vertical
shaft engines since January 1, 2017 (examples include placing customers on allocation or
“controlled order entry,” declining to accept new customers or renew existing customers,
delivering less than the quantity promised, being unable to meet timely shipment commitments,
etc.)?
No

Yes

If yes, please describe.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 36

IV-18. Raw materials.—
(a) How have small vertical shaft engines raw material prices changed since January 1, 2017?

Factor

Explain, noting how raw material
Fluctuate price changes have affected your
with no
firm’s selling prices for small
Overall
No
Overall
increase change decrease clear trend
vertical shaft engines.

Cost of raw materials
(b) How did the imposition of tariffs under section 232 on imported steel/aluminum products
impact raw material costs for small vertical shaft engines?

Factor

Overall increase

No change

Overall decrease

Fluctuate with
no clear trend

Cost of raw materials after
section 232 tariffs imposed
(c) How did the imposition of tariffs under section 232 on imported steel/aluminum products
impact your firm’s sales price for small vertical shaft engines?

Factor
Prices for small vertical
shaft engines

No change

Overall
Increase

Fluctuate
Overall
with no
Decrease clear trend

Explanation

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 37

IV-19. Interchangeability.--Is small vertical shaft engines produced in the United States and in other
countries interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country-pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country-pair
Country-pair

China

Other countries

United States
China
For any country-pair producing vertical shaft engines that is sometimes or never interchangeable,
identify the country-pair and explain the factors that limit or preclude interchangeable use:

IV-20. Factors other than price.--Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between small vertical shaft
engines produced in the United States and in other countries a significant factor in your firm’s
sales of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country-pair
Country-pair

China

Other countries

United States
China
For any country-pair for which factors other than price always or frequently are a significant
factor in your firm’s sales of vertical shaft engines, identify the country-pair and report the
advantages or disadvantages imparted by such factors:

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 38

IV-21. Impact of section 301 tariffs.-- Did the imposition of tariffs on Chinese-origin products under
section 301 have an impact on the small vertical shaft engines market in the United States?
Yes— Please indicate the
impact in the table below.

Factor
Supply of U.S.produced small
vertical shaft engines
Supply of small
vertical shaft engines
imported from China
Supply of small
vertical shaft engines
imported from other
countries
Prices for small
vertical shaft engines
Overall U.S. demand
for small vertical shaft
engines
Raw material costs for
small vertical shaft
engines

No

Overall
No
Overall
increase change decrease

Don’t know

Explain, noting how the imposition
Fluctuate of tariffs under section 301 affected
with no
each factor of the small vertical
clear
shaft engines market in the United
trend
States.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 39

IV-22. Customer identification.--List the names and contact information for your firm’s 10 largest U.S.
customers for small vertical shaft engines since January 1, 2017. Indicate the share of the
quantity of your firm’s total shipments of small vertical shaft engines that each of these
customers accounted for in 2019.

Customer’s name

1
2
3
4
5
6
7
8
9
10

Contact person

Email

Telephone

City

State

Share
of
2019
sales
(%)

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 40

IV-23. Competition from imports.-(a)

Lost revenue.--Since January 1, 2017: To avoid losing sales to competitors selling small
vertical shaft engines from China, did your firm:
Item

No

Yes

Reduce prices
Roll back announced price increases
(b)

Lost sales.--Since January 1, 2017: Did your firm lose sales of small vertical shaft engines
to imports of this product from China?
No

(c)

Yes

The submission of lost sales/lost revenue allegations is to be completed only by NONPETITIONERS.
If your firm indicated “yes” to any of the above, your firm can provide the Commission
with additional information by downloading and completing the lost sales/lost revenues
worksheet at http://usitc.gov/trade_remedy/question.htm. Note that the Commission
may contact the firms named to verify the allegations reported.
Is your firm submitting the lost sales/lost revenues worksheet?
No—Please explain.
Yes—Please complete the worksheet and submit via the Commission dropbox.
https://dropbox.usitc.gov/oinv/. (PIN: SMENG)

IV-24. Other explanations.--If your firm would like to further explain a response to a question in Part
IV for which a narrative response box was not provided, please note the question number and
the explanation in the space provided below. Please also use this space to highlight any issues
your firm had in providing the data in this section, including but not limited to technical issues
with the MS Word questionnaire.

Business Proprietary
U.S. Producers’ Questionnaire – Small Vertical Shaft Engines from China (Preliminary)

Page 41

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2020/small_vertical_shaft_engines_china/preliminary.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: SMENG

• E-mail.—E-mail the MS Word questionnaire to Charles.Cummings@usitc.gov; include a scanned copy
of the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop-box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140-2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non-encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm does not produce this product, please fill out page 1, print, sign, and submit a scanned copy
to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.