Occupational Exposure to Beryllium in the Construction Industry Supporting Statement 1218-0NEW

Occupational Exposure to Beryllium in the Construction Industry Supporting Statement 1218-0NEW.docx

OCCUPATIONAL EXPOSURE TO BERYLLIUM STANDARD IN THE CONSTRUCTION INDUSTRY (29 CFR 1926.1124)

OMB: 1218-0273

Document [docx]

Download: docx | pdf

OCCUPATIONAL EXPOSURE TO BERYLLIUM STANDARD FOR THE CONSTRUCTION INDUSTRY (29 CFR 1926.1124)

1218-0NEW

DRAFT 9-20-2019 reviewed by SOL1 (Alli and Kristen), revised by Belinda and Seleda, reviewed by Tiffany

Note

The Occupational Safety and Health Administration (OSHA) is proposing to update the beryllium standards for the construction and shipyard industries (29 CFR 1926.1124 and 29 CFR 1915.1024, respectively), which contain collections of information that are subject to review by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995 (PRA), 44 U.S.C. 3501 et seq., and OMB regulations at 5 CFR part 1320. These standards, and the beryllium standard for general industry (29 CFR 1910.1024), contain collection of information (paperwork) requirements that have been previously approved by OMB. The requirements of all three standards are currently contained in the approved information collections request (ICR) under OMB control number 1218-0267. For purposes of OMB review under the PRA, OSHA is proposing to separate the collections of information in the beryllium standards for construction and shipyards from those in the general industry standard. Therefore, the agency is submitting two ICRs, one for the construction industry and one for the shipyard sector, and requesting a new control number for each. The currently approved ICR for OMB control number 1218-0267 will then contain only those collections of information requirements in the beryllium standard for general industry.

SUPPORTING STATEMENT FOR
THE INFORMATION COLLECTION REQUIREMENTS
IN THE PROPOSED OCCUPATIONAL EXPOSURE

TO BERYLLIUM STANDARD IN THE CONSTRUCTION INDUSTRY

(29 CFR 1926.1124)¹

OMB CONTROL NUMBER 1218-0NEW

(September 2019)

Justification

Explain the circumstances that make the collection of information necessary. Identify any legal or administrative requirements that necessitate the collection. Attach a copy of the appropriate section of each statute and regulation mandating or authorizing the collection of information.

The main objective of the Occupational Safety and Health Act (“OSH Act” or “Act”) is to “assure so far as possible every working man and woman in the Nation safe and healthful working conditions and to preserve our human resources” (29 U.S.C. 651(a)). To achieve this objective, the OSH Act specifically authorizes “the development and promulgation of occupational safety and health standards” (29 U.S.C. 651(b)(9)). The Act further states that “[t]he Secretary . . . shall . . . prescribe such rules and regulations as [he/she] may deem necessary to carry out [his/her] responsibilities under this Act, including rules and regulations dealing with the inspection of an employer’s establishment” (29 U.S.C. 657(g)(2)).

To protect worker health, the OSH Act authorizes the Secretary of Labor (Secretary) to develop standards that provide for “monitoring or measuring employee exposure” to occupational hazards and to “prescribe the type and frequency of medical examinations or other tests which shall be made available, by the employer or at [the employer’s] cost, to employees exposed to such hazards in order to most effectively determine whether the health of such employees is adversely affected by such exposure” (29 U.S.C. 655(b)(7)). Moreover, the Act directs the Secretary to “issue regulations requiring employers to maintain accurate records of employee exposures to potentially toxic materials or harmful physical agents which are required to be monitored or measured,” and further requires that such regulations provide “for each employee or former employee to have access to such records as will indicate [the employee’s] own exposure to toxic materials or harmful physical agents” as appropriate (29 U.S.C. 657(c)(3)). In addition, the OSH Act mandates that “[e]ach employer shall make, keep and preserve, and make available to the Secretary . . . such records regarding [his/her] activities relating to this Act as the Secretary . . . may prescribe by regulation as necessary or appropriate for the enforcement of this Act or for developing information regarding the causes and prevention of occupational accidents and illnesses” (29 U.S.C. 657(c)(1)).

Section 6(b)(7) of the Act, 29 U.S.C. 655(b)(7), further specifies that “[a]ny standard promulgated under this subsection shall prescribe the use of labels or other appropriate forms of warning as are necessary to ensure that employees are apprised of all hazards to which they are exposed, relevant symptoms and appropriate emergency treatment, and proper conditions and precautions of safe use or exposure.”

Under the authority granted by the OSH Act, the Secretary, through the Occupational Safety and Health Administration (“OSHA” or “the agency”) is issuing a proposed rule to revise the occupational exposure to beryllium and beryllium compounds standard for the construction industry (29 CFR 1926.1124).

Indicate how, by whom, and for what purpose the information is to be used. Except for a new collection, indicate the actual use the agency has made of the information received from the current collection.

OSHA is proposing to revise several collection of information requirements contained in the beryllium standard for the construction industry. The proposed standard removes and adds language to several collections of information in this information collection request; these changes are described in Table A below.

Table A --- The Proposed Changes to the Collection of Information Requirements.

Section number and title	Currently approved collection of information requirements	Proposed action
§1926.1124(f)(1)(i) -- Methods of Compliance -- Written Exposure Control Plan.	(A) A list of operations and job titles reasonably expected to involve airborne exposure to or dermal contact with beryllium; (B) A list of operations and job titles reasonably expected to involve airborne exposure at or above the action level; (C) A list of operations and job titles reasonably expected to involve airborne exposure above the TWA PEL or STEL; (D) Procedures for minimizing cross-contamination; (E) Procedures for minimizing the migration of beryllium within or to locations outside the workplace; (F) A list of engineering controls, work practices, and respiratory protection required by paragraph (f)(2) of this standard; (G) A list of personal protective clothing and equipment required by paragraph (h) of this standard; (H) Procedures for removing, laundering, storing, cleaning, repairing, and disposing of beryllium-contaminated personal protective clothing and equipment, including respirators; (I) Procedures used to restrict access to work areas when airborne exposures are, or can reasonably be expected to be, above the TWA PEL or STEL, to minimize the number of employees exposed to airborne beryllium and their level of exposure, including exposures generated by other employers or sole proprietors.	Remove paragraphs (B) through (E) and (H) from section (f)(1), written exposure control plan. Revise paragraph (A) to list operations and job titles reasonable expected to involve exposure to beryllium. Add a new requirement, paragraph (f)(1)(i)(E), to list procedures used to ensure the integrity of each containment used to minimize exposures to employees outside the containment.
§1926.1124(h)(2)(v) -- Personal Protective Clothing and Equipment -- Removal and Storage.	(v) When personal protective clothing or equipment required by this standard is removed from the workplace for laundering, cleaning, maintenance or disposal, the employer must ensure that personal protective clothing and equipment are stored and transported in sealed bags or other closed containers that are impermeable and are labeled in accordance with paragraph (m)(3) of this standard and the HCS (29 CFR 1910.1200).	Remove this labeling requirement from the beryllium standard for construction and therefore from the ICR.
§1926.1124(h)(3)(iii) --Personal Protective Clothing and Equipment -- Cleaning and Replacement.	(iii) The employer must inform in writing the persons or the business entities who launder, clean or repair the personal protective clothing or equipment required by this standard of the potentially harmful effects of airborne exposure to and dermal contact with beryllium and that the personal protective clothing and equipment must be handled in accordance with this standard.	Remove this requirement from the beryllium standard for construction and therefore from the ICR.
§1926.1124(j)(3) –Housekeeping--Disposal.	(3) When the employer transfers materials containing beryllium to another party for use or disposal, the employer must provide the recipient with a copy of the warning described in paragraph (m)(2) of this standard.	Remove this requirement from the beryllium standard for construction and therefore from the ICR.
§1926.1124(k)(7) -- Medical Surveillance -- CBD Diagnostic Center.	(7) CBD diagnostic center. (i) The employer must provide an evaluation at no cost to the employee at a CBD diagnostic center that is mutually agreed upon by the employer and the employee. The examination must be provided within 30 days of:	Add an initial consultation with the CBD diagnostic center, as follows: The employer must also provide, at no cost to the employee and within a reasonable time after the initial consultation with the CBD diagnostic center, any of the following tests if deemed appropriate by the examining physician at the CBD diagnostic center: pulmonary function testing (as outlined by the American Thoracic Society criteria), bronchoalveolar lavage (BAL), and transbronchial biopsy. The initial consultation with the CBD diagnostic center must be provided within 30 days of:
§1926.1124(n)(1)(ii)(F) -- Recordkeeping --Air Monitoring Data.	(F) The name, social security number, and job classification of each employee represented by the monitoring, indicating which employees were actually monitored.	Remove the requirement to collect and record social security numbers, as follows: (F) The name and job classification of each employee represented by the monitoring, indicating which employees were actually monitored.
§1926.1124(n)(3)(ii)(A) – Recordkeeping -- Medical Surveillance.	(ii) The record must include the following information about the employee: Name, social security number, and job classification;	Remove the requirement to collect and record social security numbers, as follows: (ii) The record must include the following information about the employee: (A) Name and job classification;
§1926.1124(n)(4)(i) -- Recordkeeping -- Training.	(i) At the completion of any training required by this standard, the employer must prepare a record that indicates the name, social security number, and job classification of each employee trained, the date the training was completed, and the topic of the training.	Remove the requirement to collect and record social security numbers, as follows: (i) At the completion of any training required by this standard, the employer must prepare a record that indicates the name and job classification of each employee trained, the date the training was completed, and the topic of the training.

Each proposed collection of information requirement contained in the beryllium standard for the construction industry is described in detail below.

§ 1926.1124(d) -- Exposure Assessment

§ 1926.1124(d)(2) Performance Option.

(2) Performance option. The employer must assess the 8-hour time-weighted average (TWA) exposure and the 15-minute short-term exposure for each employee on the basis of any combination of air monitoring data and objective data sufficient to accurately characterize airborne exposure to beryllium.

Purpose: The general purposes of requiring an assessment of airborne exposure to beryllium include: determination of the extent and degree of exposure at the worksite; identification and prevention of employee overexposure; identification of the sources of exposure; collection of exposure data so that the employer can select the proper control methods to be used; and evaluation of the effectiveness of those selected methods. Assessment enables employers to meet their legal obligation to ensure that their employees are not exposed in excess of the permissible exposure limit (PEL) and to ensure employees have access to accurate information about their exposure levels, as required by section 8(c)(3) of the Act, 29 U.S.C. 657(c)(3). In addition, exposure data enables the physicians or other licensed health care professionals (PLHCP) performing medical examinations to be informed of the extent of occupational exposures.

The performance option is intended to allow employers flexibility in assessing the beryllium exposures of their employees. Under this option, the employer can use any combination of objective data and air monitoring data. Where employers want a more structured approach for meeting their exposure assessment obligations, OSHA also provides the scheduled monitoring option. OSHA takes the burden for the collection of information under the scheduled monitoring option in paragraph (d)(3).

§ 1926.1124(d)(3) Scheduled Monitoring Option.

Initial Monitoring § 1926.1124(d)(3)(i), (ii) & (iii).

(i) The employer must perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the airborne exposure of employees on each shift, for each job classification, and in each work area.

(ii) The employer must perform initial monitoring to assess the short-term exposure from 15-minute personal breathing zone air samples measured in operations that are likely to produce airborne exposure above the short term exposure limit (STEL) for each work shift, for each job classification, and in each work area.

(iii) Where several employees perform the same tasks on the same shift and in the same work area, the employer may sample a representative fraction of these employees in order to meet the requirements of paragraph (d)(3). In representative sampling, the employer must sample the employee(s) expected to have the highest airborne exposure to beryllium.

Purpose: The purpose of initial monitoring is to determine the extent and degree of beryllium exposure at the worksite; identify and prevent employee overexposure; identify the sources of exposure to beryllium; collect exposure data so that the employer can select the proper control methods to be used; and evaluate the effectiveness of those selected methods. Exposure assessment enables employers to meet their legal obligation to ensure that their employees are not exposed to beryllium in excess of the permissible exposure limits and to notify employees of their exposure levels, including any overexposures, as required by section 8(c)(3) of the Act (29 U.S.C. § 657(c)(3)). In addition, the availability of exposure data enables PLHCPs performing medical examinations to be informed of the extent of an employee’s occupational exposures.

Periodic Monitoring - § 1926.1124(d)(3)(v), (vi), (vii) & (viii).

(v) Where the most recent exposure monitoring indicates that airborne exposure is at or above the action level but at or below the TWA PEL, the employer must repeat such monitoring within six months of the most recent monitoring.

(vi) Where the most recent exposure monitoring indicates that airborne exposure is above the TWA PEL, the employer must repeat such monitoring within three months of the most recent 8-hour TWA exposure monitoring.

(vii) Where the most recent (non-initial) exposure monitoring indicates that airborne exposure is below the action level, the employer must repeat such monitoring within six months of the most recent monitoring until two consecutive measurements, taken seven or more days apart, are below the action level, at which time the employer may discontinue 8-hour TWA exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard.

(viii) Where the most recent exposure monitoring indicates that airborne exposure is above the STEL, the employer must repeat such monitoring within three months of the most recent short-term exposure monitoring until two consecutive measurements, taken seven or more days apart, are below the STEL, at which time the employer may discontinue short-term exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of this standard.

Purpose: OSHA recognizes that exposures in the workplace may fluctuate. Periodic monitoring helps employers identify changes in the workplace that influence exposures, and helps employers ensure that workers do not experience exposures that are higher than expected. Periodic monitoring also facilitates the identification and use of additional control measures where necessary. In addition, periodic monitoring reminds workers and employers of the continued need to protect against the hazards associated with beryllium exposure. The standard allows for employers to discontinue monitoring under certain circumstances.

§ 1926.1124(d)(4) Reassessment of Exposure.

(4) Reassessment of exposure. The employer must reassess airborne exposure whenever a change in the production, process, control equipment, personnel, or work practices may reasonably be expected to result in new or additional airborne exposure at or above the action level or STEL, or when the employer has any reason to believe that new or additional airborne exposure at or above the action level or STEL has occurred.

Purpose: The additional assessments required under this subsection are necessary to ensure that the exposure monitoring accurately represents existing exposure conditions. The exposure information gained from such assessments will enable the employer to take appropriate action to protect exposed workers. On the other hand, additional monitoring is not required simply because a change occurs, if the change could not reasonably be expected to result in new or additional exposures to beryllium.

§ 1926.1124(d)(6)(i) & (ii) Employee Notification of Assessment Results.

(i) Within 15 working days after completing an exposure assessment in accordance with paragraph (d) of this standard, the employer must notify each employee whose airborne exposure is represented by the assessment of the results of that assessment individually in writing or post the results in an appropriate location that is accessible to each of these employees.

(ii) Whenever an exposure assessment indicates that airborne exposure is above the TWA PEL or STEL, the employer must describe in the written notification the corrective action being taken to reduce airborne exposure to or below the exposure limit(s) exceeded where feasible corrective action exists but had not been implemented when the monitoring was conducted.

Purpose: Notifying workers of their exposures allows them to know if the employer is required to make medical surveillance available to them, as well as whether the standard requires them to wear respiratory protection and/or personal protective clothing and equipment. Notification can also permit and encourage workers to be more proactive in working safely to control their own exposures through better work practices and more active participation in safety programs. The time allowed for notification is consistent with the harmonized notification times established for a number of health standards applicable to general industry, construction, and maritime.

§ 1926.1124(e) Competent Person

(e) Competent Person. Wherever employees are, or can reasonably be expected to be, exposed to airborne beryllium at levels above the TWA PEL or STEL, the employer must designate a competent person to:

(1) Make frequent and regular inspections of job sites, materials, and equipment;

(2) Implement the written exposure control plan under paragraph (f) of the standard;

(3) Ensure that all employees use respiratory protection in accordance with paragraph (g) of this standard; and

(4) Ensure that all employees use personal protective clothing and equipment in accordance with paragraph (h) of this standard.

Purpose: The purpose of a competent person is to provide further protection for employees wherever employees may be exposed to airborne beryllium at levels above the PELs through inspections, implementation of the written exposure control plan, and ensuring the use of respiratory protection and protective clothing and equipment.

Any burdens associated with the competent person are discussed as part of the written exposure control plan discussion in Item 12.

§ 1926.1124(f)(1) -- Methods of Compliance -- Written Exposure Control Plan.

§ 1926.1124(f)(1)(i), (ii), & (iii) Written exposure control plan.

(i) The employer must establish, implement, and maintain a written exposure control plan, which must contain:

(A) A list of operations and job titles reasonably expected to involve exposure to beryllium;

(B) A list of engineering controls, work practices, and respiratory protection required by paragraph (f)(2) of this standard;

(D) Procedures used to restrict access to work areas when airborne exposures are, or can reasonably be expected to be, above the TWA PEL or STEL, to minimize the number of employees exposed to airborne beryllium and their level of exposure, including exposures generated by other employers or sole proprietors; and

(E) Procedures used to ensure the integrity of each containment used to minimize exposures to employees outside the containment.

(ii) The employer must review and evaluate the effectiveness of each written exposure control plan at least annually and update it, as necessary, when:

(A) Any change in production processes, materials, equipment, personnel, work practices, or control methods results, or can reasonably be expected to result, in new or additional airborne exposure to beryllium;

(B) The employer is notified that an employee is eligible for medical removal in accordance with paragraph (l)(1) of this standard, referred for evaluation at a chronic beryllium disease (CBD) diagnostic center, or shows signs or symptoms associated with airborne exposure to beryllium; or

(iii) The employer must make a copy of the written exposure control plan accessible to each employee who is, or can reasonably be expected to be, exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)).

Purpose: Written exposure control plans are instrumental in ensuring that employers comprehensively and consistently protect employees exposed to beryllium. Requiring employers to articulate conditions resulting in exposure and how those exposures will be controlled will help to ensure that they have a complete understanding of the controls needed to comply with the rule. Even in cases where employees are well trained, the written plan can help to ensure that controls are consistently used and become part of employees’ routine skill sets. Employers can also use the plans to ensure that maintenance checks are routinely performed and optimal conditions are maintained. In addition, written exposure control plans are a useful method for communicating protections to employees and ensuring that access to areas where exposures exceed the TWA PEL or STEL is restricted so as to minimize the number of employees exposed to beryllium at airborne levels above these limits.

OSHA notes that proposed paragraph (f) would remove several requirements of the written exposure control plan and would add proposed paragraph (f)(1)(i)(E), which requires that the written exposure control plan include procedures used to ensure the integrity of each containment used to minimize exposures to employees outside the containment. The purpose of proposed paragraph (f)(1)(i)(E) is to ensure that any containment used is not compromised such that employees outside of the containment are potentially exposed to beryllium at levels above the TWA PEL or STEL. OSHA believes that this requirement will help ensure that workers not directly involved in beryllium-related work are not exposed to beryllium in excess of the TWA PEL or STEL.

The written exposure control plan needs to be periodically reviewed and, if needed, updated because work conditions can change (e.g., the employer purchases a new type of equipment). A written exposure control plan will not likely need to be updated often because employees tend to use the same equipment to perform the same tasks at many locations. However, a yearly review is needed to ensure that all current scenarios are captured in the plan.

Requiring the plan to be accessible also serves an important purpose. Written exposure control plans are effective methods for communicating protections to employees. Making the written plan accessible empowers and protects employees by providing them with written information about sources of exposure, controls, and personal protective clothing and equipment, as well as certain other procedures to minimize employee exposure.

§ 1926.1124(g)(2) – Respiratory protection -- Respiratory protection program.

(2) Respiratory protection program. Where this standard requires an employer to provide respiratory protection, the selection and use of such respiratory protection must be in accordance with the Respiratory Protection standard (29 CFR 1910.134).

Purpose: The respiratory protection program will ensure that respirators are properly used in the workplace and are effective in protecting employees. As required under 29 CFR 1910.134(c)(1), employers providing employees with respiratory protection pursuant to the beryllium standard must establish a written respiratory protection program. This written program must include: procedures for selecting respirators for use in the workplace; medical evaluations of employees required to use respirators; fit-testing procedures for tight-fitting respirators; procedures for proper use of respirators in routine and reasonably foreseeable emergency situations; procedures and schedules for maintaining respirators; procedures to ensure adequate quality, quantity, and flow of breathing air for atmosphere-supplying respirators; training of employees in respiratory hazards to which they might be exposed and the proper use of respirators; and procedures for evaluating the effectiveness of the program.

§ 1926.1124(h)(2)(v) -- Personal Protective Clothing and Equipment -- Removal and Storage – REMOVED

(v) When personal protective clothing or equipment required by this standard is removed from the workplace for laundering, cleaning, maintenance or disposal, the employer must ensure that personal protective clothing and equipment are stored and transported in sealed bags or other closed containers that are impermeable and are labeled in accordance with paragraph (m)(2) of this standard and the HCS (29 CFR 1910.1200).

§1926.1124(h)(3)(iii) --Personal Protective Clothing and Equipment -- Cleaning and Replacement -- REMOVED

(iii) The employer must inform in writing the persons or the business entities who launder, clean or repair the personal protective clothing or equipment required by this standard of the potentially harmful effects of airborne exposure to and dermal contact with beryllium and that the personal protective clothing and equipment must be handled in accordance with this standard.

OSHA is proposing to remove paragraphs (h)(2)(v) and (h)(3)(iii) from the standards. Paragraph (h)(2)(v) requires that PPE removed from the workplace for laundering, cleaning, maintenance, or disposal be placed in closed, impermeable bags or containers labeled in accordance with paragraph (m)(2) of the construction standard, as well as the Hazard Communication standard. Paragraph (h)(3)(iii) requires employers to inform, in writing, any person or business entity who launders, cleans, or repairs PPE required by the standards of the potentially harmful effects of exposure to airborne beryllium and dermal contact with beryllium, and of the need to handle the PPE in accordance with the standards. Because these labeling requirements would be removed from the beryllium standard for construction, they would create no paperwork burden and would be removed from the ICR.

§ 1926.1124(j)(3) – Housekeeping – Disposal – REMOVED

(3) When the employer transfers materials containing beryllium to another party for use or disposal, the employer must provide the recipient with a copy of the warning described in paragraph (m)(2) of this standard.

OSHA is proposing to remove paragraph (j)(3) of the standard, which requires that, when transferring beryllium-containing materials to another party for use or disposal, employers provide the recipient a copy of the warning label currently required by paragraph (m)(2). As part of this proposal, OSHA is also proposing to remove the labeling requirement in paragraph (m)(2). Because there was no burden associated with this item, its proposed removal has no impact on the paperwork burden.

§ 1926.1124(k)(1), (2), and (3) -- Medical Surveillance.

(1) General.

(i) The employer must make medical surveillance required by this paragraph available at no cost to the employee, and at a reasonable time and place, to each employee:

(A) Who is or is reasonably expected to be exposed at or above the action level for more than 30 days per year;

(B) Who shows signs or symptoms of CBD or other beryllium-related health effects;

(C) Whose most recent written medical opinion required by paragraph (k)(6) or (k)(7) recommends periodic medical surveillance.

(ii) The employer must ensure that all medical examinations and procedures required by this standard are performed by, or under the direction of, a licensed physician.

(2) Frequency. The employer must provide a medical examination:

(i) Within 30 days after determining that:

(A) An employee meets the criteria of paragraph (k)(1)(i)(A), unless the employee has received a medical examination, provided in accordance with this standard, within the last two years; or

(B) An employee meets the criteria of paragraph (k)(1)(i)(B).

(ii) At least every two years thereafter for each employee who continues to meet the criteria of paragraph (k)(1)(i)(A), (B), or (C) of this standard.

(iii) At the termination of employment for each employee who meets any of the criteria of paragraph (k)(1)(i) of this standard at the time the employee’s employment terminates, unless an examination has been provided in accordance with this standard during the six months prior to the date of termination.

(3) Contents of examination.

(i) The employer must ensure that the PLHCP conducting the examination advises the employee of the risks and benefits of participating in the medical surveillance program and the employee’s right to opt out of any or all parts of the medical examination.

(ii) The employer must ensure that the employee is offered a medical examination that includes:

(A) A medical and work history, with emphasis on past and present exposure to beryllium, smoking history, and any history of respiratory system dysfunction;

(B) A physical examination with emphasis on the respiratory system;

(D) Pulmonary function tests, performed in accordance with the guidelines established by the American Thoracic Society including forced vital capacity (FVC) and forced expiratory volume in one second (FEV₁);

(E) A standardized BeLPT or equivalent test, upon the first examination and at least every two years thereafter, unless the employee is confirmed positive. If the results of the BeLPT are other than normal, a follow-up BeLPT must be offered within 30 days, unless the employee has been confirmed positive. Samples must be analyzed in a laboratory certified under the College of American Pathologists/Clinical Laboratory Improvement Amendments (CLIA) guidelines to perform the BeLPT.

(F) A low dose computed tomography (LDCT) scan, when recommended by the PLHCP after considering the employee’s history of exposure to beryllium along with other risk factors, such as smoking history, family medical history, sex, age, and presence of existing lung disease; and

(G) Any other test deemed appropriate by the PLHCP.

Purpose: The general purposes of the medical surveillance provisions for beryllium include: to determine, when reasonably possible, if an individual worker is at increased risk for adverse health effects with continued exposure to beryllium; to identify beryllium-related adverse health effects for the purpose of taking appropriate intervention measures; and to determine workers’ fitness to use personal protective equipment, such as respirators. The inclusion of medical surveillance requirements in the construction standard is consistent with Section 6(b)(7) of the OSH Act (29 U.S.C. 655(b)(7)), which requires that, when appropriate, OSHA include medical surveillance programs in its standards to determine whether exposure to the hazard addressed by the standard adversely affects the health of workers. Nearly all of OSHA’s health standards include medical surveillance requirements.

The initial medical examination serves to identify workers who have beryllium-related medical diseases or other health problems that additional beryllium exposure may exacerbate. The requirement that employers offer employees a medical examination within 30 days after determining that the employee is or is reasonably expected to be exposed at or above the action level for more than 30 days a year will help employers determine if an employee will be able to work in the job involving beryllium exposure without increased risk of adverse health effects.

The requirement to offer an examination to employees who show signs or symptoms of CBD or other beryllium-related health effects is necessary because the risk of material impairment of health remains significant at the action level. Consequently, even employees exposed at the action level for fewer than 30 days in a year may be at risk of developing CBD and other beryllium-related diseases and adverse health effects. In addition, beryllium sensitization and CBD could develop in employees who are especially sensitive to beryllium, may have been unknowingly exposed, or may have been exposed to greater amounts than the exposure assessment suggests. By requiring covered employers to make a medical exam available when an employee exhibits signs or symptoms, the standard protects all employees who may have developed CBD, including employees who have been exposed to beryllium for less than 30 days a year above the action level.

The requirement to offer an examination to employees whose most recent written medical opinion recommends periodic medical surveillance is critical to ensure the evaluation of those workers who have been identified by a PLHCP as in need of further evaluation, but may not otherwise meet a trigger for medical surveillance under paragraphs (k)(1)(i)(A) or (B).

The requirement to offer a medical examination at least every two years after the initial examination to employees who continue to meet the criteria is intended to facilitate the detection of health effects at an early stage so that interventions can be taken to improve health. The requirement to offer an examination at termination under the specified circumstances is intended to ensure that no employee terminates employment while carrying a detectable, but undiagnosed, health condition related to beryllium exposure.

The specified contents of the examination are those that are necessary for the PLHCP to opine on any recommended limitations on the employee's use of respirators, protective clothing, or equipment or on the employee's airborne exposure to beryllium and whether the employee has any detected medical condition, such as CBD or beryllium sensitization, or any medical conditions related to airborne exposure that require further evaluation or treatment. The provision for “any other tests deemed appropriate” gives the examining PLHCP the flexibility to determine additional tests that are medically necessary and related to beryllium exposure. This flexibility is needed because there are no tests beyond those listed in paragraphs (k)(3)(ii)(A)–(E) that are necessarily applicable to all employees covered by the medical surveillance requirement.

§ 1926.1124(k)(4) Information Provided to the PLHCP.

(4) Information provided to the PLHCP. The employer must ensure that the examining PLHCP (and the agreed-upon CBD diagnostic center, if an evaluation is required under paragraph (k)(7) of this standard) has a copy of this standard and must provide the following information, if known:

(i) A description of the employee’s former and current duties that relate to the employee’s exposure to beryllium;

(ii) The employee’s former and current levels of airborne exposure;

(iii) A description of any personal protective clothing and equipment, including respirators, used by the employee, including when and for how long the employee has used that personal protective clothing and equipment; and

(iv) Information from records of employment-related medical examinations previously provided to the employee, currently within the control of the employer, after obtaining written consent from the employee.

Purpose: The information required to be provided to the PLHCP and, when applicable, the CBD diagnostic center, will help the PLHCP and CBD diagnostic center evaluate employees’ health as it relates to their assigned duties and fitness to use personal protective equipment, including respirators, when needed. Providing the PLHCP and CBD diagnostic center with exposure monitoring results, as required under paragraph (k)(4)(ii), will assist them in determining if an employee is likely to be at risk of adverse effects from airborne beryllium exposure at work. A well-documented exposure history will also assist the PLCHP in determining if a condition may be related to beryllium exposure.

§ 1926.1124(k)(5)(i), (ii), and (iii) Licensed Physician’s Written Medical Report for the Employee.

(5) Licensed physician’s written medical report for the employee. The employer must ensure that the employee receives a written medical report from the licensed physician within 45 days of the examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard) and that the PLHCP explains the results of the examination to the employee. The written medical report must contain:

(i) A statement indicating the results of the medical examination, including the licensed physician’s opinion as to whether the employee has

(A) Any detected medical condition, such as CBD or beryllium sensitization (i.e., the employee is confirmed positive, as defined in paragraph (b) of this standard), that may place the employee at increased risk from further airborne exposure, and

(B) Any medical conditions related to airborne exposure that require further evaluation or treatment.

(ii) Any recommendations on:

(A) The employee’s use of respirators, protective clothing, or equipment; or

(B) Limitations on the employee's airborne exposure to beryllium.

(iii) If the employee is confirmed positive or diagnosed with CBD or if the licensed physician otherwise deems it appropriate, the written report must also contain a referral for an evaluation at a CBD diagnostic center.

(iv) If the employee is confirmed positive or diagnosed with CBD the written report must also contain a recommendation for continued periodic medical surveillance.

(v) If the employee is confirmed positive or diagnosed with CBD the written report must also contain a recommendation for medical removal from airborne exposure to beryllium, as described in paragraph (l).

Purpose: The rule requires that only the employee receive a written medical report that includes detailed medical information. By providing the licensed physician’s written medical report to employees, those who might be at increased risk of health impairment from airborne beryllium exposure will be able to consider interventions (i.e., health management strategies) with guidance from the licensed physician. Such strategies might include employment choices to limit airborne exposures or to use a respirator for additional protection.

The requirement for a written medical report ensures that the employee receives a record of all findings. Employees will also be able to provide the written medical report to future health care providers.

The preparation of the report is accounted for under Item 13, cost to the employer for an employee's medical examination.

§ 1926.1124(k)(6) Licensed Physician’s Written Medical Opinion for the Employer.

(i) The employer must obtain a written medical opinion from the licensed physician within 45 days of the medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard). The written medical opinion must contain only the following:

(A) The date of the examination;

(B) A statement that the examination has met the requirements of this standard;

(D) A statement that the PLHCP has explained the results of the medical examination to the employee, including any tests conducted, any medical conditions related to airborne exposure that require further evaluation or treatment, and any special provisions for use of personal protective clothing or equipment;

(ii) If the employee provides written authorization, the written opinion must also contain any recommended limitations on the employee’s airborne exposure to beryllium.

(iii) If the employee is confirmed positive or diagnosed with CBD or if the licensed physician otherwise deems it appropriate, and the employee provides written authorization, the written opinion must also contain a referral for an evaluation at a CBD diagnostic center.

(iv) If the employee is confirmed positive or diagnosed with CBD and the employee provides written authorization, the written opinion must also contain a recommendation for continued periodic medical surveillance.

(v) If the employee is confirmed positive or diagnosed with CBD and the employee provides written authorization, the written opinion must also contain a recommendation for medical removal from airborne exposure to beryllium, as described in paragraph (l).

(vi) The employer must ensure that each employee receives a copy of the written medical opinion described in paragraph (k)(6) of this standard within 45 days of any medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of this standard) performed for that employee.

Purpose: The written medical opinion in the construction standard contains information that allows employers to protect employee health, such as recommended limitations on the employee’s use of respirators, while at the same time protecting employee privacy as much as possible by allowing certain information to be included only with the employee’s written authorization. The date of the examination and a statement about the examination meeting the requirements of this standard are also included to provide the employer with evidence that compliance with the medical surveillance requirements is current.

The employer must obtain the written opinion within 45 days of the examination; OSHA believes this requirement will provide the licensed physician sufficient time to receive and consider the results of any tests included in the examination, including a follow-up BeLPT, and allow the employer to take any necessary protective measures in a timely manner. The requirement that the opinion be in written form ensures that employers and workers have the benefit of this information. The standard requires the employer to ensure that the worker gets a copy of the licensed physician’s written medical opinion within 45 days of the medical examination. This will allow workers to present it as proof of a current medical examination to future employers.

§ 1926.1124(k)(7)(i), (ii), (iii), & (iv) -- CBD Diagnostic Center.

(i) The employer must provide an evaluation at no cost to the employee at a CBD diagnostic center that is mutually agreed upon by the employer and the employee. The employer must also provide, at no cost to the employee and within a reasonable time after the initial consultation with the CBD diagnostic center, any of the following tests if deemed appropriate by the examining physician at the CBD diagnostic center: pulmonary function testing (as outlined by the American Thoracic Society criteria), bronchoalveolar lavage (BAL), and transbronchial biopsy. The initial consultation with the CBD diagnostic center must be provided within 30 days of:

(A) The employer’s receipt of a physician’s written medical opinion to the employer that recommends referral to a CBD diagnostic center; or

(B) The employee presenting to the employer a physician’s written medical report indicating that the employee has been confirmed positive or diagnosed with CBD, or recommending referral to a CBD diagnostic center.

(ii) The employer must ensure that the employee receives a written medical report from the CBD diagnostic center that contains all the information required in paragraph (k)(5)(i), (ii), (iv), and

(v) and that the PLHCP explains the results of the examination to the employee within 30 days of the examination.

(iii) The employer must obtain a written medical opinion from the CBD diagnostic center within 30 days of the medical examination. The written medical opinion must contain only the information in paragraph (k)(6)(i), as applicable, unless the employee provides written authorization to release additional information. If the employee provides written authorization, the written opinion must also contain the information from paragraphs (k)(6)(ii), (iv), and (v), if applicable.

(iv) The employer must ensure that each employee receives a copy of the written medical opinion from the CBD diagnostic center described in paragraph (k)(7) of this standard within 30 days of any medical examination performed for that employee.

Purpose: Evaluation at a CBD diagnostic center allows employees who are confirmed positive or diagnosed with CBD to receive specialized evaluation to determine the appropriate tests to monitor for possible progression from sensitization to CBD and to monitor the progression of CBD if it does occur. The requirements in (k)(7)(ii), (iii), and (iv) regarding the written medical report and written medical opinion serve the purposes described above in the discussions of (k)(5) and (k)(6).

§ 1926.1124(l)(1) & (2) -- Medical removal.

(1) An employee is eligible for medical removal, if the employee works in a job with airborne exposure at or above the action level and either:

(i) The employee provides the employer with:

(A) A written medical report indicating a confirmed positive finding or CBD diagnosis; or

(B) A written medical report recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(5)(v) or (k)(7)(ii) of this standard; or

(ii) The employer receives a written medical opinion recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(6)(v) or (k)(7)(iii) of this standard.

(2) If an employee is eligible for medical removal, the employer must provide the employee with the employee’s choice of:

(i) Removal as described in paragraph (l)(3) of this standard; or

(ii) Remaining in a job with airborne exposure at or above the action level, provided that the employer provides, and ensures that the employee uses, respiratory protection that complies with paragraph (g) of this standard whenever airborne exposures are at or above the action level.

Purpose: Medical removal, generally, serves three main purposes. First, it increases employee participation and confidence in the standard's medical surveillance program. Second, by requiring the employer to remove employees with the highest risk of suffering material impairment of health (if the employee chooses removal), MRP may benefit sensitized employees and those with CBD. Finally, MRP may provide employers with an additional incentive to keep employee exposures low.

The purpose of the provisions in paragraphs (l)(1) and (l)(2) is to provide an option for medical removal of workers in jobs with airborne exposure to beryllium at or above the action level and who are diagnosed with CBD, confirmed positive, or otherwise recommended for removal by a physician in accordance with paragraph (k)(5)(v), (k)(7)(ii), (k)(6)(v), or (k)(7)(iii) of this standard. By making employees eligible for removal when a written medical report indicates a confirmed positive finding or CBD diagnosis or recommends removal from airborne exposure to beryllium based on a CBD diagnosis or a confirmed positive finding, the standard offers protection to employees who could benefit from such removal. The same protection is offered to employees for whom the written medical opinion contains, with their authorization, a recommendation for medical removal in accordance with paragraph (k)(6)(v) or (k)(7)(iii). The medical removal provision is structured to allow the employee to retain discretion over whether the employer is informed of the employee’s illness or diagnosis, so the purpose of the requirement for the employer’s receipt of documentation is to trigger the removal requirements while ensuring the employer has notice and maintaining the employee’s privacy.

§ 1926.1124(m) -- Communication of hazards.

§ 1926.1124(m)(1) – General.

(i) Chemical manufacturers, importers, distributors, and employers must comply with all requirements of the HCS (29 CFR 1910.1200) for beryllium.

(ii) Employers must include beryllium in the hazard communication program established to comply with the HCS. Employers must ensure that each employee has access to labels on containers of beryllium and to safety data sheets, and is trained in accordance with the requirements of the HCS (29 CFR 1910.1200) and paragraph (m)(2) of this standard.

Purpose: The purpose of ensuring that each employee has training and access to labels and safety data sheets is to enable workers to take the precautions necessary to implement special practices to prevent or reduce beryllium exposure.

Requirements that employers provide training to workers, both in paragraph (m)(1)(ii) and elsewhere, such as in proposed paragraph (m)(2), are not collections of information. Further, the burden for the requirement to comply with the HCS is taken in the HCS under OMB control number 1218-0072.

§ 1926.1124(m)(2) – Warning labels – REMOVED

(2) Consistent with the HCS (29 CFR 1910.1200), the employer must label each bag and container of clothing, equipment, and materials contaminated with beryllium, and must, at a minimum, include the following on the label:

DANGER

CONTAINS BERYLLIUM

MAY CAUSE CANCER

CAUSES DAMAGE TO LUNGS

AVOID CREATING DUST

DO NOT GET ON SKIN

OSHA is proposing to remove paragraph (m)(2), which requires specific language for warning labels applied to bags and containers of PPE and other materials contaminated with beryllium. This is consistent with OSHA’s proposal to remove the corresponding requirements to provide such warning labels. As explained above with regard to paragraphs (h)(2)(v) and (j)(3), OSHA is proposing to remove the requirements to label PPE removed from the workplace for laundering, cleaning, maintenance, or disposal as well as beryllium-containing material being transferred to another party for use or disposal. Because there was no burden associated with this item, its proposed removal has no impact on the paperwork burden.

§ 1926.1124(m)(2)(iv) – Employee Information²

(iv) Employee Information. The employer must make a copy of this standard and its appendices readily available at no cost to each employee and designated employee representative(s).

Purpose: The purpose of the requirement to make a copy of the standard available to employees is to ensure that employees are aware of their employer’s obligations under the standard and to assist employees in recognizing, and protecting against, the hazards of beryllium. OSHA considers the requirement to make a copy of the Standard and its appendices available to workers to be a public disclosure of information originally supplied by the Federal government to the employer for the purpose of disclosure to the public, and thus not a collection of information pursuant to 5 CFR 1320.3(c)(2). Therefore, OSHA is taking no burden hours or costs for this requirement.

§ 1926.1124(n) -- Recordkeeping.

§ 1926.1124(n)(1)(i), (ii), & (iii) -- Air Monitoring Data.

(i) The employer must make and maintain a record of all exposure measurements taken to assess airborne exposure as prescribed in paragraph (d) of this standard.

(ii) This record must include at least the following information:

(A) The date of measurement for each sample taken;

(B) The task that is being monitored;

(D) The number, duration, and results of samples taken;

(E) The type of personal protective clothing and equipment, including respirators, worn by monitored employees at the time of monitoring; and

(F) The name and job classification of each employee represented by the monitoring, indicating which employees were actually monitored.

(iii) The employer must ensure that exposure records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).

Purpose: OSHA believes that exposure records are necessary and appropriate for protection of worker health, enforcement of the standards, and development of information regarding the causes and prevention of occupational illnesses. Also, the agency and others can use the records to identify illnesses and deaths that may be attributable to beryllium exposure, evaluate compliance programs, and assess the efficacy of the standards. Establishing and maintaining records of air-monitoring data permit employers, workers, OSHA, and other interested parties (i.e., industry trade associations and worker unions or comparable organizations) to identify the levels, durations, and extent of occupational hazards related to beryllium exposure. The records will allow interested parties to determine if existing controls are protecting workers or whether additional controls are necessary to provide the required protection. These records also allow OSHA to ascertain whether employers are complying with the standards, thereby ensuring that workers are receiving adequate protection from occupational exposure to beryllium and beryllium compounds.

OSHA’s proposed deletion of the requirement, in paragraph (n)(1)(ii)(F), to include employees’ social security numbers (SSNs) in the records of air monitoring data, does not change costs or burden hours.

§ 1926.1124(n)(2)(i), (ii), & (iii) -- Objective Data.

(i) Where an employer uses objective data to satisfy the exposure assessment requirements under paragraph (d)(2) of this standard, the employer must make and maintain a record of the objective data relied upon.

(ii) This record must include at least the following information:

(A) The data relied upon;

(B) The beryllium-containing material in question;

(D) A description of the process, task, or activity on which the objective data were based; and

(E) Other data relevant to the process, task, activity, material, or airborne exposure on which the objective data were based.

(iii) The employer must ensure that objective data are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).

Purpose: The records of objective data required under paragraph (n)(2) are necessary and appropriate for protection of worker health, enforcement of the proposed standard, and development of information regarding the causes and prevention of occupational illnesses. The agency and others can use the records to identify illnesses and deaths that may be attributable to beryllium exposure, evaluate compliance programs, and assess the efficacy of the standard. Establishing and maintaining records of objective data permit employers, workers, OSHA, and other interested parties (i.e., industry trade associations and worker unions, or comparable organizations) to identify the levels, durations, and extent of beryllium exposure, determine if existing controls are protecting workers or whether additional controls are necessary to provide the required protection, and assess the relationship between beryllium exposure and the subsequent development of diseases. These records also allow OSHA to ascertain whether employers are complying with the requirements of the standard, thereby ensuring that workers are receiving adequate protection from beryllium exposure.

There is no burden taken for the items in paragraph (n)(2) because OSHA assumes any burden for the purposes of this Supporting Statement is incurred under the scheduled monitoring option.

§ 1926.1124(n)(3)(i), (ii), & (iii) -- Medical Surveillance.

(i) The employer must make and maintain a record for each employee covered by medical surveillance under paragraph (k) of this standard.

(ii) The record must include the following information about each employee:

Name and job classification;

(B) A copy of all licensed physicians' written medical opinions for each employee; and

(iii) The employer must ensure that medical records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).

Purpose: These medical-surveillance records, like exposure records, are necessary and appropriate for protection of worker health, enforcement of the standard, and development of information regarding the causes and prevention of occupational illnesses. Worker access to medical-surveillance records helps protect workers because such records contribute to the evaluation of workers’ health and enable workers and their healthcare providers to make informed health care decisions. Furthermore, the employer can evaluate medical-surveillance data they receive for indications that workplace conditions are associated with increased risk of beryllium-related illnesses, and take appropriate corrective actions. Finally, the agency and others can use medical surveillance records to identify illnesses and deaths that may be attributable to respirable beryllium exposure, evaluate compliance programs, and assess the efficacy of the standard.

OSHA’s proposed deletion of the requirement, in paragraph (n)(3)(ii)(A), to include employees’ SSNs in their medical surveillance records does not change costs or burden hours.

§ 1926.1124(n)(4)(i) &(ii) -- Training.

(i) At the completion of any training required by this standard, the employer must prepare a record that indicates the name and job classification of each employee trained, the date the training was completed, and the topic of the training.

(ii) This record must be maintained for three years after the completion of training.

Purpose: The creation and maintenance of the training records will permit both OSHA and employers to ensure that required training has occurred on schedule.

OSHA’s proposed deletion of the requirement, in paragraph (n)(4)(i), to include employees’ SSNs in their training records does not change costs or burden hours.

§ 1926.1124(n)(5) -- Access to Records.

(5) Access to records. Upon request, the employer must make all records maintained as a requirement of this standard available for examination and copying to the Assistant Secretary, the Director, each employee, and each employee's designated representative(s) in accordance with the Records Access standard (29 CFR 1910.1020).

Purpose: OSHA is requiring access to the records to ensure enforcement of the standard and to assist employees and their representatives in the development of information regarding the causes and prevention of occupational illnesses.

§ 1926.1124(n)(6) -- Transfer of Records.

(6) Transfer of records. The employer must comply with the requirements involving transfer of records set forth in the Records Access standard (29 CFR 1910.1020).

Paragraph (h) of § 1910.1020 requires employers who cease to do business to transfer medical and exposure-monitoring records to the successor employer, who then must receive and maintain the records. If no successor employer is available, the employer must, at least three months before ceasing business, notify current workers who have records of their right to access these records.

Purpose: OSHA considers the employer’s transfer of records to a successor employer to be usual and customary communications during the transition from one employer to a successor employer, and is not taking any burden or cost for this provision in Item 12. In this regard, the employer would communicate the location of all records, including employee exposure-monitoring and medical records, at the facility to the successor employer during the transfer of business operations, as a matter of usual and customary business practice.

Describe whether, and to what extent, the collection of information involves the use of automated, electronic, mechanical, or other technological collection techniques or other forms of information technology, e.g., permitting electronic submission of responses, and the basis for the decision for adopting this means of collection. Also, describe any consideration of using information technology to reduce the burden.

Employers may use improved information technology when establishing and maintaining the required records. The agency wrote the paperwork requirements of the standard in performance-oriented language, i.e., in terms of what data to collect, not how to record the data.

Describe efforts to identify duplication. Show specifically why any similar information already available cannot be used or modified for use of the purposes described in Item 2 above.

The information collection requirements of the beryllium construction standard are specific to each employer and worker involved, and no other source or agency duplicates these requirements or can make the required information available to the agency (i.e., the required information is available only from employers).

If the collection of information impacts small businesses or other small entities, describe any methods used to minimize burden.

The information collection requirements of the standard do not have a significant impact on a substantial number of small entities.

Describe the consequences to Federal program or policy activities if the collection is not conducted or is conducted less frequently, as well as any technical or legal obstacles to reducing burden.

The information collection frequencies specified by the construction standard are the minimum frequencies that the agency believes are necessary to ensure that employers and OSHA can effectively monitor the exposure and health status of workers, thereby preventing serious illness or death resulting from hazardous exposure to beryllium.

Explain any special circumstances that would cause an information collection to be conducted in a manner:

· Requiring respondents to report information to the agency more often than quarterly;

· Requiring respondents to prepare a written response to a collection of information in fewer than 30 days after receipt of it;

· Requiring respondents to submit more than an original and two copies of any

document;

· Requiring respondents to retain records, other than health, medical, government contract, grant-in-aid, or tax records, for more than three years;

· In connection with a statistical survey, that is not designed to produce valid and reliable results that can be generalized to the universe of study;

· Requiring the use of a statistical data classification that has not been approved by OMB;

· That includes a pledge of confidentiality that is not supported by authority established in statute or regulation, that is not supported by disclosure and data security policies that are consistent with the pledge, or which unnecessarily impedes sharing of data with other agencies for compatible confidential use; or

· Requiring respondents to submit proprietary trade secret, or other confidential information unless the agency can demonstrate that it has instituted procedures to protect the information's confidentiality to the extent permitted by law.

Under paragraph (d)(6) of the standard, employers must inform workers, in writing or by posting, of the exposure-assessment results no later than 15 working days after obtaining the results. If these results indicate that a worker’s exposures are above the PEL, the notification must state what corrective actions the employer is taking to reduce the worker’s exposure to or below the PEL.

The beryllium standard for construction requires that exposure records, paragraph (n)(1)(iii), objective data, paragraph (n)(2)(iii), and medical records, paragraph (n)(3)(iii), be maintained pursuant to OSHA’s Records Access standard (29 CFR 1910.1020). Under the records access standard, 29 CFR 1910.1020(d)(1)(i), the medical records for each employee must be preserved and maintained for at least the duration of employment plus 30 years, with certain exceptions (see 29 CFR 1910.1020(d)(1)(i)(A)-(C)). Similarly, under 29 CFR 1910.1020(d)(1)(ii) and (iii), employee exposure records, as well as analyses using exposure or medical records, must be preserved and maintained for 30 years.

If applicable, provide a copy and identify the data and page number of publication in the Federal Register of the agency's notice, required by 5 CFR 1320.8(d), soliciting comments on the information collection prior to submission to OMB. Summarize public comments received in response to that notice and describe actions taken by the agency in response to these comments. Specifically address comments received on cost and hour burden.

Describe efforts to consult with persons outside the agency to obtain their views on the availability of data, frequency of collection, the clarity of instructions and recordkeeping, disclosure, or reporting format (if any), and on the data elements to be recorded, disclosed, or reported.

Consultation with representatives of those from whom information is to be obtained or those who must compile records should occur at least once every three years -- even if the collection of information activity is the same as in prior periods. There may be circumstances that may preclude consultation in a specific situation. These circumstances should be explained.

In accordance with 5 CFR 1320.11, OSHA is submitting this proposed ICR to OMB for the information collection requirements associated with the proposed rule for Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors (29 CFR 1926.1124 and 29 CFR 1915.1024). As noted in the Section VI of the preamble, “OMB Review Under the Paperwork Reduction Act of 1995,” members of the public who wish to provide comments on this ICR must submit written comments to the Office of Information and Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, OSHA (RIN–1218 –AB76), Office of Management and Budget, Room 10235, Washington, DC 20503, Telephone: 202-395-6929/Fax: 202-395-6881 (these are not toll-free numbers), e-mail: OIRA_submission@omb.eop.gov. OSHA encourages commenters also to submit their comments on these paperwork requirements to the rulemaking docket, OSHA Docket Office (Docket Number OSHA-2019-0006), Room N-3653, 200 Constitution Avenue, NW, Washington, DC 20210, along with their comments on other parts of the proposed rule. Commenters also may submit their comments to OSHA at http://www.regulations.gov, the Federal eRulemaking portal. Comments submitted in response to the notice are public records; therefore, OSHA cautions commenters about submitting personal information such as Social Security numbers and date of birth. These comments also will become part of the rulemaking record, and will be available for public inspection and copying in the OSHA Docket Office and at http://www.regulations.gov. The agency will respond to any comments received in response to this notice.

On January 9, 2017, OSHA published its final rule on Occupational Exposure to Beryllium and Beryllium Compounds in the Federal Register (82 FR 2470–2757). The standards for occupational exposure to beryllium in general industry (29 CFR 1910.1024), construction (29 CFR 1926.1124), and shipyards (29 CFR 1915.1024) contain collection of information (paperwork) requirements that have been approved under OMB Control number 1218–0267. OSHA is proposing to separate the ICRs for the three beryllium standards, so that each standard (general industry, construction, and shipyards) will have a separate OMB control number. The collection of information requirements contained in this paperwork package will cover only the beryllium standard for the construction industry; therefore, the agency is requesting a new OMB control number for this ICR.

Explain any decision to provide any payment or gift to respondents, other than remuneration of contractors or grantees.

The agency will not provide payments or gifts to the respondents.

Describe any assurance of confidentiality provided to respondents and the basis for the assurance in statute, regulation, or agency policy.

To ensure that the personal information contained in medical records required by the proposed standard remains confidential, the agency developed and implemented 29 CFR 1913.10 (“Rules of Agency Practice and Procedure Concerning OSHA Access to Employee Medical Records”) to regulate access to these records.

Provide additional justification for any questions of a sensitive nature, such as sexual behavior and attitudes, religious beliefs, and other matters that are commonly considered private. This justification should include the reasons why the agency considers the questions necessary, the specific uses to be made of the information, the explanation to be given to persons from whom the information is requested, and any steps to be taken to obtain their consent.

Questions of a sensitive nature may be included in medical questions posed by the PLHCP to properly diagnose the patient and make appropriate recommendations regarding further testing and the employee’s occupational exposure to beryllium.

Provide estimates of the hour burden of the collection of information. The statement should:

Indicate the number of respondents, frequency of response, annual hour burden, and an explanation of how the burden was estimated. Unless directed to do so, agencies should not conduct special surveys to obtain information on which to base hour burden estimates. Consultation with a sample (fewer than 10) of potential respondents is desirable. If the hour burden on respondents is expected to vary widely because of differences in activity, size, or complexity, show the range of estimated hour burden, and explain the reasons for the variance. Generally, estimates should not include burden hours for customary and usual business practices.

· If this request for approval covers more than one form, provide separate hour burden estimates for each form and aggregate the hour burdens.

· Provide estimates of annualized costs to respondents for the hour burdens for collections of information, identifying and using appropriate wage rate categories.

Respondent Burden-Hour and Cost burden Determinations

The burden hours and cost determinations are based on OSHA’s Preliminary Economic Analysis (“PEA”) for the proposed rule, Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors. The PEA can be found in section IV of the proposed rule (see Docket OSHA-H005C-2006-0870). This Supporting Statement provides a summary of the determinations made by the agency for the burden hours, burden-hour cost, and capital (operation and maintenance) costs under Items 12 and 13. The non-compliance rates and some assumptions are based on the Supporting Statement for the Information Collection Requirements in the Final Beryllium Standard for General Industry (29 CFR 1910.1024), Construction (29 CFR 1926.1124), and Maritime (29 CFR 1915.1024), published January 9, 2017, and the 2019 PEA (section IV of the proposed rule).³

As described in Table IV-4 of the proposed rule, OSHA estimates that there are a total of 2,796 affected employers and a total of 11,486 affected employees that are potentially at risk from exposure to beryllium in the construction and shipyard industries. For the purposes of this ICR, the agency estimates in the construction industry that there are 2,100 establishments affected and 8,400 employees affected.

For the sole purpose of calculating burden hours and costs under the Paperwork Reduction Act, this supporting statement has rounded certain numbers up to obtain the totals stated in the supporting statement equations. Such presentation makes it easier for the public to read and validate the supporting statement’s burden hour and cost estimates.

Wage Rates

The wage rate estimates were updated using data for base wages from the Standard Occupational Classification (SOC), the March 2018 Occupational Employment Statistics survey of the Bureau of Labor Statistics. The agency obtained the wage rates utilizing the median wage for the appropriate occupation and the North American Industry Classification System (NAICS). The SOC has been provided for each occupational title. The wages include a fringe markup (loading factor) of 46.6 percent of base wages. The resulting loaded hourly wages are shown below in Table B.⁴

Table B – Estimated Wage Rates

Job	NAICS	SOC[a]	Occupation	Median Hourly Wage	Fringe Markup Percentage, Total [b]	Loaded Hourly (or Daily) Wage
Production Worker	31-33	51-0000	Production Occupations	$17.37	46.6%	$25.47
Human Resources Manager	31-33	11-3121	Human Resources Managers	$53.38	46.6%	$78.27
Clerical	31-33	43-4071	File Clerks	$16.85	46.6%	$24.71
First Line Supervisor	Various	51-1011	First-Line Supervisors of Production and Operating Workers	$29.59	46.6%	$43.39

Sources: U.S. Dept. of Labor, OSHA, Directorate of Standards and Guidance, Office of Regulatory Analysis OSHA, 2019).

[a] 2010 Standard Occupational Classification System. Bureau of Labor Statistics. //www.bls.gov/soc/classification.htm.

[b] BLS, 2018b. 46.6 percent represents fringe as a percentage of base wages. BLS-reported data for fringe as a percentage of total compensation is 31.8 percent.

A. Exposure Monitoring

§ 1926.1124(d)(2) Performance Option.

When the employer elects the performance option, the employer must assess the 8-hour TWA exposure and the 15-minute short-term exposure for each employee on the basis of any combination of air monitoring data and objective data sufficient to accurately characterize airborne exposure to beryllium.

OSHA has not taken any separate burden associated with the performance option, assuming for the purposes of this analysis that all employers would elect the more burdensome scheduled monitoring. OSHA recognizes that the performance option is less burdensome and has thus overestimated the burden hours for the monitoring option under this approach.

§ 1926.1124(d)(3) Scheduled Monitoring Option.

1. Initial Monitoring

§ 1926.1124(d)(3)(i), (ii), & (iii) Initial Monitoring

Paragraph (d)(3)(i) requires the employer to perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the airborne exposure of employees on each shift, for each job classification, and in each work area.

Paragraph (d)(3)(ii) requires the employer to perform initial monitoring to assess the short-term exposure from 15-minute personal breathing zone air samples measured in operations that are likely to produce airborne exposure above the STEL for each work shift, for each job classification, and in each work area. Paragraph (d)(3)(iii) allows the employer to sample a representative fraction of these employees in order to meet the requirements of paragraph (d)(3) in cases where several employees perform the same tasks on the same shift and in the same work area.

The total number of workers affected is 8,400. Workers in abrasive blasting (in both construction and shipyards) are estimated to be sampled 20 percent more to account for the failure rate. The number of abrasive blasting worker samples is 8,400 times 120 percent, or 10,080. Table IV-2 of the PEA shows Number of Workers Exposed to Beryllium by Affected Application Group, Job Category, and Exposure Range (mg/m³).The number of workers that will be directly subjected to initial monitoring (2,520) is the number of affected workers in each NAICS, divided by 4 because there are 4 workers represented by each sample {(8,400 x 1.20)/4=2,520}. Each sampled production worker will incur 30 minutes (0.5 hours) of lost work time during air monitoring, at an hourly wage rate of $25.47. Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 2,520 (samples) x 0.96 (non-compliance rate)  0.5 hours (Production worker time) = 1,210 hours

One-Time Cost: 1,210 (hours)  $25.47 (Production worker wage) = $30,819

2. Periodic Exposure Monitoring

§ 1926.1124(d)(3)(v), (vi), (vii), & (viii) Scheduled Monitoring Option.

Paragraph (d)(3)(v) requires the employer to repeat exposure monitoring within six months of the most recent monitoring where the most recent exposure monitoring indicates that airborne exposure is at or above the action level but at or below the TWA PEL. Paragraph (d)(3)(vi) requires the employer to repeat such monitoring within three months of the most recent 8-hour TWA exposure monitoring where the most recent exposure monitoring indicates that airborne exposure is above the TWA PEL. Where the most recent (non-initial) exposure monitoring indicates that airborne exposure is below the action level, paragraph (d)(3)(vii) requires the employer to repeat such monitoring within six months of the most recent monitoring until two consecutive measurements, taken seven or more days apart, are below the action level, at which time the employer may discontinue 8-hour TWA exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4) of the standard. Finally, where the most recent exposure monitoring indicates that airborne exposure is above the STEL, paragraph (d)(3)(viii) requires the employer to repeat such monitoring within three months of the most recent short-term exposure monitoring until two consecutive measurements, taken seven or more days apart, are below the STEL, at which time the employer may discontinue short-term exposure monitoring for those employees whose exposure is represented by such monitoring, except as otherwise provided in paragraph (d)(4).

Workers between the AL and PEL:

For periodic monitoring, the number of samples per year varies depending on whether workers are between the AL and PEL or over the PEL. OSHA estimates that there will be 4,210 workers between the AL and PEL after the rule is implemented. These workers will be sampled twice a year. OSHA takes the total number of workers between the AL and PEL (4,210), divides it by four workers represented per sample, multiplies the samples by 120% (to account for a 20% failure rate), and then multiplies the samples by two per year. This results in a total of 2,526 samples for workers between the AL and PEL (4,210 workers ÷ 4 workers × 120% × 2 samples = 2,526).

Workers above the PEL:

OSHA estimates that there will be 159 workers still exposed above the PEL after the rule is implemented. These workers above the PEL are sampled four times per year (twice as often as workers between the AL and PEL). This number is also divided by four workers represented per sample and multiplied by 120% to account for the failure rate. This results in a total of 190 samples for workers above the PEL (159 workers ÷ 4 workers × 120% × 4 samples = 190).

Total samples between AL and PEL and above PEL:

Summing the number of samples for workers between the AL and PEL and over the PEL results in a total of 2,716 samples (2,526 + 190 = 2,716).

Each periodic exposure monitoring sample (2,716 samples) will result in 30 minutes (0.5 hours) of lost work time during air monitoring. Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 2,716 (samples)  0.96 (non-compliance rate)  0.5 hours (Production worker time) = 1,304 hours

Annual Cost: 1,304 (hours) ´ $25.47 (Production worker wage) = $33,213

3. Additional Exposure Monitoring

§ 1926.1124(d)(4) Reassessment of Exposure.

The employer must reassess airborne exposure whenever a change in the production, process, control equipment, personnel, or work practices may reasonably be expected to result in new or additional airborne exposure at or above the action level or STEL, or when the employer has any reason to believe that new or additional airborne exposure at or above the action level or STEL has occurred.

Of the number of at risk workers subject to initial monitoring, 2,520 workers (see previous paragraph, Initial Monitoring), OSHA estimates 10% will require additional monitoring resulting from changes in the production process, materials, equipment, personnel, work practices, or control methods. Each worker will incur 30 minutes (0.5 hours) of lost work time during air monitoring. Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 2,520 x 10% (workers sampled) x 1.0 (assessment per year) x 0.96 (non-compliance rate) x 0.5 hours (Production worker time) = 121 hours

Cost: 121 (hours) x $25.47 (Production worker wage) = $3,082

4. Employee Notification

§ 1926.1124(d)(6)(i) & (ii) Employee Notification of Assessment Results.

Paragraph (d)(6)(i) requires employers, within 15 working days after completing an exposure assessment in accordance with paragraph (d) of this standard, to notify each employee whose airborne exposure is represented by the assessment of the results of that assessment, either individually in writing or by posting the results in an appropriate location that is accessible to each of these employees.

Whenever an exposure assessment indicates that airborne exposure is above the TWA PEL or STEL, paragraph(d)(6)(ii) requires the employer to describe in the written notification the corrective action being taken to reduce airborne exposure to or below the exposure limit(s) exceeded where feasible corrective action exists but had not been implemented when the monitoring was conducted.

These burden hours are included in the Human Resources Manager time under Item 12 Recordkeeping §1926.1124(n)(1). As a result, employee notification does not appear as a separate entry on Table C.

B. Written Exposure Control Plan, Respiratory Protection, Medical Surveillance, and Medical Removal

Written Exposure Control Plan

§ 1926.1124(f)(1)(i), (ii), & (iii) -- Methods of Compliance --Written Exposure Control Plan.

Paragraph (f)(1)(i) requires the employer to establish, implement, and maintain a written exposure control plan containing the information listed in paragraphs (f)(1)(i)(A) through (E). The employer is required, under paragraph (f)(1)(ii), to review and evaluate the effectiveness of each written exposure control plan at least annually and update it as necessary, as described in paragraphs (f)(1)(ii)(A) through (C). Paragraph (f)(1)(iii) requires the employer to make a copy of the written exposure control plan accessible to each employee who is, or can reasonably be expected to be, exposed to airborne beryllium.

There are 2,100 affected establishments in the construction industry. Table IV-4 of the PEA, in the proposed rule, and specifically the column labeled “Affected Establishments [b],” shows the profile of the total number of affected establishments in abrasive blasting for construction needing a written exposure control plan.

a. Developing and Implementing a Written Exposure Control Plan

Baseline to Develop Plan Per-Establishment Costs:

OSHA estimates that 2,100 construction establishments have potential exposure to beryllium. The agency estimates a Human Resource Manager, earning an hourly wage of $78.27, spends four hours per establishment to develop a written exposure control plan. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 2,100 (written plans) ´ 0.25 (non-compliance rate) ´ 4 hours (HR manager time) = 2,100 hours

One-Time Cost: 2,100 (hours) ´ $78.27 (HR manager wage) = $164,367

OSHA notes that proposed paragraph (f) would remove several requirements of the written exposure control plan and would add proposed paragraph (f)(1)(i)(E), which requires that the written exposure control plan include procedures used to ensure the integrity of each containment used to minimize exposures to employees outside the containment. Overall, OSHA estimates that developing and implementing the written exposure control plan, with these changes, will require half the amount of time that developing and implementing the written exposure control plan as required in the 2017 final rule. Therefore, OSHA has changed the total number of hours required for development and implementation from 8 (the estimate included in the Supporting Statement for the 2017 final) to 4.5 (4 hours for the HR Manager to develop the plan and 0.5 hours for the designated competent person to implement the plan).

Baseline to Implement Plan Per-Establishment Costs:

In the construction industry, the designated competent person must make frequent and regular inspections of job sites, materials, and equipment and implement the written exposure control plan.

OSHA estimates that 2,100 construction establishments have potential exposure to beryllium. The agency estimates a competent person, earning an hourly wage of $78.27, spends 30 minutes (0.5 hours) per establishment to implement a written exposure control plan. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 2,100 (establishments)  0.25 (non-compliance rate)  0.5 hours (competent person time) = 263 hours

Annual Cost: 263 (hours)  $78.27 (competent person wage) = $20,585

b. Additional Costs Based on Size of Establishment

The cost to develop a written exposure control plan would also vary with the number of employees, with larger establishments having higher costs than smaller establishments. Therefore, OSHA has added additional burden and cost on a per-employee basis. OSHA estimates that there are a total of 8,400 workers at risk with a non-compliance rate of 25%. Managers are estimated to need 0.5 hours per employee to write the plan.

Burden hours: 8,400 (employees)  0.25 (non-compliance rate)  0.5 hours (HR manager time) = 1,050 hours

One time Cost: 1,050 (hours)  $78.27 (HR manager wage) = $82,184

c. Reviewing and Updating the Written Exposure Control Plan; Making the Written Exposure Control Plan Accessible to Employees

Under paragraph (f)(1)(ii), the employer must review and update the exposure control plan when: any change in production processes, materials, equipment, personnel, work practices, or control methods results or can reasonably be expected to result in new or additional exposures to beryllium; the employer is notified that an employee is eligible for medical removal under paragraph (l)(1), is referred for evaluation at a CBD diagnostic center, or shows signs or symptoms associated with airborne exposure to beryllium; or the employer has any reason to believe that new or additional airborne exposures are occurring or will occur.

Under paragraph (f)(1)(iii), employers must make a copy of the written exposure control plan accessible to each employee who is or can reasonably be expected to be exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)). Burden hours and costs for employers to allow employees access to the written exposure control plan are included in this item of the supporting statement under section D. Access to Records, subsection 1, Employee Access to Written Exposure Control Plan -- §1926.1124(f)(1)(iii).

OSHA estimates that there are a total of 8,400 employees at risk of exposures at or above the action level annually. Managers are estimated to need 12 minutes (0.2 hours) per affected employee per quarter, or 48 minutes (4 x 12) (0.8 hours) per affected employee per year to review and update the plan. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 8,400 (employees) ´ 0.25 (non-compliance rate) ´ 0.8 hours (HR manager time) = 1,680 hours

Annual Cost: 1,680 (hours) ´ $78.27 (HR manager wage) = $131,494

2. Respiratory Protection

§ 1926.1124(g)(2) -- Respiratory protection program.

Under paragraph (g)(2), where the standard requires an employer to provide respiratory protection, the selection and use of such respiratory protection must be in accordance with the Respiratory Protection standard (29 CFR 1910.134). The Respiratory Protection standard, 29 CFR 1910.134(c)(1), requires employers to establish and implement a written respiratory protection program containing worksite-specific procedures. The program must be updated as necessary to reflect changes in workplace conditions that affect respirator use. 29 CFR 1910.134(c)(1)(i)-(ix) lists the information that must be included in the employer’s written respiratory protection program.

Develop and Implement Plan

There is a cost per establishment to set up a written respirator program in accordance with the respiratory protection standard (29 CFR 1910.134). The respiratory protection standard requires written procedures for the proper selection, use, cleaning, storage, and maintenance. OSHA estimates that there are 210 construction establishments are potentially at risk from exposure to beryllium that could exceed the PEL. This is 10 percent of the 2,100 construction establishments will develop a respiratory protection plan. The agency estimates that it takes an HR Manager eight hours to develop a respiratory protection plan for each of the 210 employers. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 210 (respirator program per establishment) ´ 0.25 (non-compliance rate) ´ 8.0 hours (HR manager time) = 424 hours

One-time Cost: 424 (hours) ´ $78.27 (HR manager wage) = $33,186

Update Plan:

OSHA estimates that it takes an HR Manager two hours to update the respiratory protection plan for each of the 210 employers. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 210 (respirator program per establishment) ´ 0.25 (non-compliance rate) ´ 2.0 hours (HR manager time) = 106 hours

Annual Cost: 106 (hours) ´ $78.27 (HR manager wage) = $8,297

3. Respirator Fit Testing

The employer will conduct respiratory fit testing for the 159 construction workers who will need to wear respirators. OSHA estimates that it will take 30 minutes (0.5 hours) for a worker to be fit-tested per respirator and 100% of the 159 workers will need to be fit-tested. The baseline for non-compliance is 100 percent.

Burden hours: 159 (production workers) ´ 1.0 (non-compliance rate) ´ 0.5 hours (Production worker time) = 80 hours

Annual Cost: 80 (hours) ´ $25.47 (Production worker wage) = $2,038

OSHA estimates that it will take a supervisor 30 minutes to fit-test the worker. The baseline for non-compliance is 100 percent.

Burden hours: 159 (Supervisor) ´ 1.0 (non-compliance rate) ´ 0.5 hours (Supervisor time) = 80 hours

Annual Cost: 80 (hours) ´ $43.39 (Supervisor wage) = $3,471

4. Medical Surveillance

§ 1926.1124(k)(1), (2), and (3) -- Medical Surveillance.

Paragraph (k)(1)(i) requires the employer to make medical surveillance required by this paragraph available at no cost to the employee, and at a reasonable time and place, to each employee: (A) Who is or is reasonably expected to be exposed at or above the action level for more than 30 days per year; (B) Who shows signs or symptoms of CBD or other beryllium-related health effects; or (C) Whose most recent written medical opinion required by paragraph (k)(6) or (k)(7) recommends periodic medical surveillance. Paragraph (k)(1)(ii) requires the employer to ensure that all medical examinations and procedures required by the standard are performed by, or under the direction of, a licensed physician.

In paragraph (k)(2)(i), the employer must provide a medical examination within 30 days of determining that: (A) An employee meets the criteria of paragraph (k)(1)(i)(A), unless the employee has received a medical examination, provided in accordance with the standard, within the last two years; or (B) An employee meets the criteria of paragraph (k)(1)(i)(B). Under paragraph (k)(2)(ii), medical examinations must be provided at least every two years thereafter for each employee who continues to meet the criteria of paragraph (k)(1)(i)(A),(B), or (C). Finally, paragraph (k)(2)(iii) requires provision of a medical exam at the termination of employment for each employee who meets any of the criteria of paragraph (k)(1)(i) of this standard at the time the employee’s employment terminates, unless an examination has been provided in accordance with this standard during the six months prior to the date of termination.

Paragraph (k)(3)(i) requires the employer to ensure that the healthcare provider conducting the examination advises the employees of the risks and benefits of participating in the medical surveillance program and the employee’s right to opt out of any or all parts of the examination. Paragraph (k)(3)(ii) specifies the required contents of the medical examination.

The number of workers subject to initial medical surveillance in the first year and periodic surveillance in each year includes both those who are over the AL and those showing signs and symptoms (of CBD or other beryllium-related health effects sensitization).

The total number of medical exams needed for construction workers is 4,973. OSHA estimated the examination requires 125 minutes (or 2.08 hours) away from work for each employee each year to complete an initial medical examination. This includes time for traveling, a health history review, the physical exam, a beryllium lymphocyte proliferation test (BeLPT), the pulmonary function test, and employee time when the PLHCP explains the results of the medical examination to the employee. Baseline non-compliance with this requirement is estimated to be 55 percent. The burden hours and annual cost associated with these provisions are:

Annual Exams

Burden hours: 4,973 (examinations) x 0.55 (non-compliance rate) × 2.080 hours (Production worker time) = 5,689 hours

Biennial Cost: 5,689 (hours) × $25.47 (Production worker wage) = $144,899

Note: The agency estimates that 10 percent of the standard medical examinations will lead to further tests recommended by the PLHCP and are included in the cost and time of the employees.

5. Referral to Diagnostic Center

§ 1926.1124(k)(7)(i), (ii), & (iii) – CBD Diagnostic Center.

Under proposed paragraph (k)(7)(i), the employer must provide an evaluation at no cost to the employee at a CBD diagnostic center that is mutually agreed upon by the employer and the employee. The employer must also provide, at no cost to the employee and within a reasonable time after the initial consultation with the CBD diagnostic center, pulmonary function testing, bronchoalveolar lavage (BAL), and transbronchial biopsy if recommended by the examining physician at the diagnostic center. The initial consultation with a CBD diagnostic center must be provided within 30 days of: (A) The employer’s receipt of a physician’s written medical opinion to the employer that recommends referral to a CBD diagnostic center; or (B) The employee presenting to the employer a physician’s written medical report indicating that the employee has been confirmed positive or diagnosed with CBD, or recommending referral to a CBD diagnostic center.

Referral exams to the CBD Diagnostic Center --Traveling Workers

The estimated annual number of referrals to the CBD diagnostic center is 235. It will take 24 hours and 15 minutes for each employee to travel by plane to the center and complete the medical examination. The baseline is 100 percent for non-compliance.

Burden hours: 235 referrals traveling x 1.0 (non-compliance) x 24.25 hours (Production worker time) = 5,699 hours

Cost: 5,699 (hours) x $25.47 (Production worker wage) = $145,154

Referral exams to the CBD Diagnostic Center –Non-Traveling Workers

The estimated annual number of referrals exams to the CBD diagnostic center is 78. It will take 4 hours and 15 minutes for each employee to travel to the center in town and complete the medical examination. The baseline is 100 percent for non-compliance.

Burden hours: 78 referrals non travel x 1.0 (non-compliance) x 4.25 hours (Production worker time) = 332 hours

Cost: 332 (hours) x $25.47 (Production worker wage) = $8,456

Note: These burden hours include the initial consultation with the CBD diagnostic center, which may be performed by telephone or by virtual conferencing methods.

6. Information Provided to the PLHCP

§ 1926.1124(k)(4) -- Information Provided to the PLHCP.

Paragraph (k)(4) requires the employer to ensure that the examining PLHCP (and the agreed-upon CBD diagnostic center, if an evaluation is required under paragraph (k)(7) of the standard) has a copy of the standard and to provide the following information, if known: a description of the employee’s former and current duties that relate to the employee’s occupational exposure to beryllium; the employee’s former and current levels of occupational beryllium exposure; a description of any personal protective clothing and equipment, including respirators, used by the employee, including when and for how long the employee has used that personal protective clothing and equipment; and information from records of employment-related medical examinations previously provided to the employee, currently within the control of the employer, after obtaining a medical release from the employee.

OSHA estimates that it will take 15 minutes (.25 hours) of a Supervisor’s time to gather and provide the information needed for the PLHCP. Baseline non-compliance with this requirement is estimated to be 55 percent.

Burden hours: 4,973 (employees) ´ 0.55 (non-compliance rate) ´ 0.25 hours (Supervisor time) = 684 hours

Biennial: 684 (hours) ´ $43.39 (Supervisor wage) = $29,679

7. Licensed Physician’s Written Medical Opinion for the Employer

§ 1926.1124(k)(6) -- Licensed Physician’s Written Medical Opinion for the Employer.

Paragraph (k)(6)(i) requires the employer to obtain a written medical opinion from the licensed physician within 45 days of the medical examination (including any follow-up BeLPT required under paragraph (k)(3)(ii)(E) of the standard). Paragraph (k)(6)(i) specifies the information that must be included in the written opinion. Paragraph (k)(6)(vi) provides that employers must ensure that the employee who underwent the medical examination receives a copy of the written medical opinion within 45 days of the examination.

There are 4,973 affected employees to whom the employer will need to provide a copy of the licensed physician’s written opinion. OSHA estimates that it will take 5 minutes (0.08 hour) of a Supervisor’s time to provide a copy of the information to the employee. Baseline non-compliance with this requirement is estimated to be 55 percent.

Supervisor:

Burden hours: 4,973 (employees) ´ 0.55 (non-compliance rate) ´ 0.08 hours (Supervisor time) = 219 hours

Biennial: 219 (hours) ´ $43.39 (Supervisor wage) = $9,502

8. Medical Removal

§ 1926.1124(l)(1) and (2) -- Medical Removal.

Under paragraph (l)(1), an employee is eligible for medical removal if the employee works in a job with airborne exposure at or above the action level and either:

(i) The employee provides the employer with:

(A) A written medical report indicating a confirmed positive finding or CBD diagnosis; or

(B) A written medical report recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(5)(v) or (k)(7)(ii) of this standard; or

(ii) The employer receives a written medical opinion recommending removal from airborne exposure to beryllium in accordance with paragraph (k)(6)(v) or (k)(7)(iii) of this standard.

Under paragraph (l)(2), if an employee is eligible for medical removal, the employer must provide the employee with the employee’s choice of:

(i) Removal as described in paragraph (l)(3) of this standard; or

In accordance with the spreadsheets for the PEA under the “Rule” tab of the Cost spreadsheet, there are 244 employees who will request medical removal because of a positive finding of CBD. OSHA estimates that it will take five minutes (0.08 hour) of a Supervisor’s time to receive and process (including conveying the two options under (l)(2)) for each medical removal request. OSHA anticipates that this will typically involve the employee authorizing that the PLHCP share a recommendation for removal with the employer. Baseline non-compliance with this requirement is estimated to be 100 percent.

Burden hours: 244 employees x 1 (non-compliance) x 0.08 hours (Supervisor time) = 20 hours

Cost: 20 (hours) x $43.39 (Supervisor wage) = $868

C. Recordkeeping

1. Exposure Assessment.

§ 1926.1124(n)(1)(i), (ii), & (iii) -- Recordkeeping -- Air Monitoring Data.

Under paragraph (n)(1)(i), the employer must make and maintain a record of all exposure measurements taken to assess airborne exposures as required by paragraph (d) of the standard. Paragraph (n)(1)(ii) states the required elements of the exposure measurement records. Under paragraph (n)(1)(iii), employers must ensure that these exposure records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).

a. Initial Exposure Monitoring (paragraph (d)(3) of §1926.1124)

As determined under Initial Exposure Monitoring, paragraph (d)(3), the agency estimates there are 2,520 exposure monitoring records being generated for this purpose. The agency estimates that an HR manager will spend 15 minutes (0.25 hours) developing and maintaining records for employee records at a loaded hourly wage of $78.27, which includes time to notify employees of the results of the exposure monitoring (typically accomplished by posting the results). Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 2,520 (workers sampled) ´ 0.96 (non-compliance rate) ´ 0.25 hours (HR manager time) = 605 hours

One-Time Cost: 605 (hours) ´ $78.27 (HR manager wage) = $47,353

Periodic Exposure Monitoring (paragraph (d)(3) of § 1926.1124)

As determined under Periodic Exposure Monitoring, paragraph (d)(3), the agency estimates there are 2,716 periodic monitoring samples being developed. The agency estimates that an HR manager will spend 15 minutes (0.25 hours) developing and maintaining employee monitoring records at a loaded hourly wage of $78.27, which includes time to notify employees of the results of the exposure monitoring (typically accomplished by posting the results). Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 2,716 (workers sampled per year) ´ 0.96 (non-compliance rate) ´ 0.25 hours (HR manager time) = 652 hours

Annual Cost: 652 (hours) ´ $78.27 (HR manager wage) = $51,032

Additional Exposure Monitoring (paragraph (d)(4) of § 1926.1124)

Of the number of at risk workers subject to initial monitoring, 2,520 workers (see previous paragraph, Initial Monitoring), OSHA estimates 10%, 252 workers, will require additional monitoring resulting from changes in the production process, materials, equipment, personnel, work practices, or control methods. The agency estimates that an HR manager will spend 15 minutes (0.25 hours) maintaining the relevant records at a loaded hourly wage of $78.27, which includes time to notify employees of the results of the exposure monitoring. Baseline non-compliance with this requirement is estimated to be 96 percent. The burden hours and cost associated with these provisions are:

Burden hours: 252 (workers sampled) (workers sampled per year) ´ 0.96 (non-compliance rate) ´ 0.25 hours (HR manager time) = 61 hours

Annual Cost: 61 (hours) ´ $78.27 (HR manager wage) = $4,774

Medical Surveillance

§ 1926.1124(n)(3)(i),(ii), & (iii) -- Recordkeeping -- Medical Surveillance.

Under paragraph (n)(3)(i), the employer must make and maintain a record for each employee covered by medical surveillance under paragraph (k) of the standard. Paragraph (n)(3)(ii) lists the information required to be included in this record. Finally, paragraph (n)(3)(iii) requires employers to ensure that these medical records are maintained and made available in accordance with the Records Access standard (29 CFR 1910.1020).

The costs and burden hours associated with compliance with 29 CFR 1910.1020 are taken in the Access to Employee Exposure and Medical Records ICR, OMB Number 1218-0065.

a. Human Resource manager

A Human Resource manager would expend 15 minutes (.25 hour) to read, copy the PLHCP’s opinion, provide and discuss the opinion with the employee, and discuss any necessary post-exam consultation with the employee. The number of post-exam records is 4,973; also there are 313 referral exam records for a total of 5,286. Baseline non-compliance with this requirement is estimated to be 96 percent.

Burden hours: 5,286 (exam records) ´ 0.96 (non-compliance rate) × 0.25 hours (HR manager time) = 1,269 hours

Annual Cost: 1,269 (hours) × $78.27 (HR manager wage) = $99,325

b. Clerical Worker Time

Each file would require 5 minutes (0.08 hours) of a clerical worker’s time to generate and maintain. The total number of medical exam records per year is 5,286. Baseline non-compliance with this requirement is estimated to be 96 percent.

Burden hours: 5,286 (exam records) ´ 0.96 (non-compliance rate) × 0.08 hours (Clerical worker time) = 406 hours

Annual Cost: 406 (hours) × $24.71 (Clerical worker wage) = $10,032

Training

§ 1926.1124(n)(4)(i) & (ii) -- Recordkeeping -- Training.

Paragraph (n)(4)(i) requires the employer to prepare a record of any training required by the standard. The record must include the name and job classification of each employee trained, the date the training was completed, and the topic of the training. Under paragraph (n)(4)(ii), this record must be maintained for three years after the completion of training.

OSHA estimates that there are 8,400 employees that will require a training record to be generated and maintained. A clerical worker will take 5 minutes (0.08 hours) to prepare and maintain these records for each employee receiving training. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 8,400 (training records) ´ 0.25 (non-compliance rate) × 0.08 hours (Clerical worker time) = 168 hours

Annual Cost: 168 (hours) × $24.71 (Clerical worker wage) = $4,151

Fit Testing Records

As required by § 1910.134(m) of the respiratory protection standard, the employer must establish and retain written information regarding medical evaluations, fit testing, and the respirator program. This information will facilitate employee involvement in the respirator program, assist the employer in auditing the adequacy of the program, and provide a record for compliance determinations by OSHA.

OSHA estimates that it will take a clerical worker 5 minutes (0.08 hours) making $24.71 an hour to maintain the records for fit testing a respirator. Baseline non-compliance with this requirement is estimated to be 100 percent.

Burden hours: 159 (employees) ´ 1 (non-compliance rate) × 0.08 hours (Clerical worker time) = 13 hours

Annual Cost: 13 (hours) × $24.71 (Clerical worker wage) = $321

D. Access to Records

1. Employee Access to Written Exposure Control Plan -- 1926.1124(f)(1)(iii)

Under paragraph (f)(1)(iii), the employer must make a copy of the exposure control plan accessible to each employee who is or can reasonably be expected to be exposed to airborne beryllium in accordance with OSHA’s Access to Employee Exposure and Medical Records (Records Access) standard (29 CFR 1910.1020(e)).

OSHA estimates it takes 5 minutes (0.08 hours) of a clerical worker’s time to make the exposure control plan accessible to the worker. OSHA estimates that approximately 5% of the 8,400 at-risk workers, or 420 workers, will request access to their records per year. Baseline non-compliance with this requirement is estimated to be 25 percent.

Burden hours: 420 (worker requests for written exposure control plan) ´ 0.25 (non-compliance rate) x 0.08 hours (Clerical worker time) = 8 hours

One-Time Cost: 8 (hours) ´ $24.71 (Clerical worker wage) = $198

2. Access to Records

§ 1926.1124(n)(5) -- Access to Records.

Pursuant to paragraph (n)(5), the employer must, upon request, make all records maintained as a requirement of the standard available for examination and copying to the Assistant Secretary, the Director, each employee, and each employee’s designated representative(s) in accordance with the Records Access standard (29 CFR 1910.1020).

OSHA estimates that approximately 5% of the 8,400 at-risk workers, or 420 workers, will request access to their records per year. OSHA estimates that it takes 5 minutes (0.08 hours) of a Clerical worker’s time to disclose these records. Baseline non-compliance with this requirement is estimated to be 100 percent. The annual burden hours and cost for this task are estimated to be:

Burden hours: 420 (worker requests for medical documentation) ´ 1 (non-compliance rate) ´ 0.08 (hours of Clerical worker time) = 34 hours

Annual Cost: 34 (hours) ´ $24.71 (Clerical worker wage) = $840

E. Rule Familiarization

The agency expects that the employer will assign responsibility for investigating the details of the proposed rule, and for determining how to implement it, to one or more supervisors. OSHA estimates that supervisors in small, medium, and large establishments will only require 1 hour to become familiar with the proposed rule, because they already familiarized themselves with the 2017 final rule. OSHA’s estimate of familiarization costs reflects the total supervisor familiarization time (cost at a supervisory wage) for each covered employer, with the number of employees at each establishment also serving as a proxy to represent the diversity of beryllium activities. The estimates of the different sizes of affected establishments and the numbers of affected employees are identified in Tables IV-4 through IV-6 of the PEA.

Small establishment (fewer than 20 employees)

Burden hours: 1,990 affected small establishments x 1 hour (Supervisor time) = 1,990 hours

Cost: 1,990 (hours) x $43.39 (Supervisor wage) = $86,346

Medium establishment (20 to 499 employees)

Burden hours: 109 affected medium establishments x 1 hour (Supervisor time) = 109 hours

Cost: 109 (hours) x $43.39 (Supervisor wage) = $4,730

Large establishment (500 or more employees)

Burden hours: 1 affected establishments in large establishments x 1 hour (Supervisor time) = 1 hour

Cost: 1 (hour) x $43.39 (Supervisor wage) = $43

Table C. Summary of Burden Hours, Burden-Hour Cost Under Item 12 for Construction
	Frequency	Basis	Respondent	Responses per Year	Non-Compliance Rate	Hours per Response	Hours per Year	Loaded Hourly Wage	Total Cost	Total Responses
	Frequency	Basis	Respondent	A	B	c	d = a x b x c	e	f = d x e	g = a x b
A. Exposure Monitoring
1. Performance Option
Objective Data	Annual	Employee	Production Worker	0	0%	0.00	0	$25.47	$0	0
2. Scheduled Monitoring Option
Initial	First Year	Employee	Production Worker	2,520	96%	0.50	1,210	$25.47	$30,819	2,419
Periodic	Annual	Employee	Production Worker	2,716	96%	0.50	1,304	$25.47	$33,213	2,607
Additional	Annual	Employee	Production Worker	252	96%	0.50	121	$25.47	$3,082	242
B. Written Exposure Control Plan, Respiratory Protection, Medical Surveillance, and Medical Removal
1. Written Exposure Control Plan*
Develop Plan	First Year	Establishment	HR Manager	2,100	25%	4.00	2,100	$78.27	$164,367	525
Implement Plan	Annual	Establishment	Competent Person	2,100	25%	0.5	263	$78.27	$20,585	525
Develop Plan	First Year	Employee	HR Manager	8,400	25%	0.50	1,050	$78.27	$82,184	2,100
Update Plan	Annual	Employee	HR Manager	8,400	25%	0.80	1,680	$78.27	$131,493	2,100
2. Respirator Program
Develop Plan	First Year	Establishment	HR Manager	210	25%	8.00	424	$78.27	$33,186	53
Update Plan	Annual	Establishment	HR Manager	210	25%	2.00	106	$78.27	$8,297	53
3. Respirator Fit Testing
Respirator Fit Testing - Labor	Annual	Employee	Production Worker	159	100%	0.50	80	$25.47	$2,038	159
Respirator Fit Testing - Labor	Annual	Employee	Supervisor	159	100%	0.50	80	$43.39	$3,471	159
4. Medical Surveillance
Medical Exam - Initial and Periodic	Biennial	Employee	Production Worker	4,973	55%	2.08	5,689	$25.47	$144,899	2,735
5. Referral to Diagnostic Center
Referral Exam - Travelling Workers	Annual	Employee	Production Worker	235	100%	24.25	5,699	$25.47	$145,154	235
Referral Exam - Non-Travelling Workers	Annual	Employee	Production Worker	78	100%	4.25	332	$25.47	$8,456	78
6. Information Provided to the PLHCP
Provide Information – Supervisor	Biennial	Employee	Supervisor	4,973	55%	0.25	684	$43.39	$29,679	2,735
7. Licensed Physician’s Written Medical Opinion
Process Information – Supervisor	Biennial	Employee	Supervisor	4,973	55%	0.08	219	$43.39	$9,502	2,735
8. Medical Removal
Medical Removal	First Year	Employee	Supervisor	244	100%	0.08	20	$43.39	$868	244
C. Recordkeeping
1. Exposure Monitoring
Initial	First Year	Employee	HR Manager	2,520	96%	0.25	605	$78.27	$47,353	2,419
Periodic	Annual	Employee	HR Manager	2,716	96%	0.25	652	$78.27	$51,032	2,607
Additional	Annual	Employee	HR Manager	252	96%	0.25	61	$78.27	$4,774	242

2. Medical Surveillance
Medical Surveillance - HR Manager	Annual	Employee	HR Manager	5,286	96%	0.25	1,269	$78.27	$99,325	5,075
Medical Surveillance – Clerical	Annual	Employee	Clerical	5,286	96%	0.08	406	$24.71	$10,032	5,075
3. Training
Training	Annual	Employee	Clerical	8,400	25%	0.08	168	$24.71	$4,151	2,100
4. Respirator Fit Testing Records
Respirator Fit Testing	Annual	Employee	Clerical	159	100%	0.08	13	$24.71	$321	159
D. Access to Records
Written Exposure Control Plan	Annual	Employee	Clerical	420	25%	0.08	8	$24.71	$198	105
Access to Records	Annual	Employee	Clerical	420	100%	0.08	34	$24.71	$840	420
E. Rule Familiarization
Small Establishments (< 20 Employees)	First Year	Establishment	Supervisor	1,990	100%	1	1,990	$43.39	$86,346	1,990
Medium Establishments (20 - 499 Employees)	First Year	Establishment	Supervisor	109	100%	1	109	$43.39	$4,730	109
Large Establishments (≥ 500 Employees)	First Year	Establishment	Supervisor	1	100%	1	1	$43.39	$43	1

First Year				18,094			7,509		$449,896	9,860
Annual				37,248			12,276		$526,462	21,941
Biennial				14,919			6,592		$184,080	8,205
Total				70,261			26,377		$1,160,438	40,006
Total ICR Three Year Average				50,739			18,075		$768,467	29,330

*The designated competent person must make frequent and regular inspections of job sites, materials, and equipment and implement the written exposure control plan. Any burdens associated with the competent person are discussed as part of the written exposure control plan discussion in Item 12.

Provide an estimate of the total annual cost burden to respondents or recordkeepers resulting from the collection of information. (Do not include the cost of any hour burden shown in Items 12 and 14.)

The cost estimate should be split into two components: (a) a total capital and start-up cost component (annualized over its expected useful life) and (b) a total operation and maintenance and purchase of services component. The estimates should take into account costs associated with generating, maintaining, and disclosing or providing the information. Include descriptions of methods used to estimate major cost factors including system and technology acquisition, expected useful life on capital equipment, the discount rate(s), and the time period over which costs will be incurred. Capital and start-up costs include, among other items, preparations for collecting information such as purchasing computers and software; monitoring, sampling, drilling and testing equipment; and record storage facilities.

If cost estimates are expected to vary widely, agencies should present ranges of cost burdens and explain the reasons for the variance. The cost of purchasing or contracting out information collections services should be part of this cost burden estimate. In developing cost burden estimates, agencies may consult with a sample of respondents (fewer than 10), utilize the 60-day pre-OMB submission public comment process and use existing economic or regulatory impact analysis associated with the rulemaking containing the information collection, as appropriate.

Generally, estimates should not include purchases of equipment or services, or portions thereof, made: (1) prior to October 1, 1995, (2) to achieve regulatory compliance with requirements not associated with the information collection, (3) for reasons other than to provide information or keep records for the government, or (4) as part of customary and usual business or private practices.

Exposure Monitoring

The agency has taken a unit cost for analyzing the samples taken for exposure monitoring. This exposure monitoring requires that three samples be taken per worker: one time-weighted average (TWA) sample and two short-term exposure limit (STEL) samples. The costs differ for initial exposure monitoring (which is conducted by certified IH) and additional/periodic monitoring (which is conducted by a lower wage IH). The unit cost for an initial TWA sample is estimated to be $617.26, which is the sum of the cost for contract industrial hygienist services ($459.95) and the associated lab fees ($157.31). The unit cost to obtain the two STEL samples is estimated to be $1,234.52 (2 x ($157.31+ $459.95)) per sampled worker. The unit cost for additional/periodic TWA samples is estimated to be $387.29, which is the sum of the cost for contract industrial hygienist services ($229.98) and the associated lab fees ($157.31). The unit cost to obtain additional/periodic STEL samples is estimated to be $774.57 (2 x ($157.31 + $229.98)).⁵

Table D shows the number of responses per year, non-compliance rate, and total cost associated with each type of exposure monitoring sample. The number of workers affected by the exposure monitoring requirements varies, with 2,520 workers affected in the first year, 2,716 workers subject to periodic exposure monitoring, and 196 workers subject to additional exposure monitoring.The total cost is calculated by multiplying the cost per sample by the number of non-compliance responses. First-year costs and the costs for each type of sample are summed to arrive at the total costs.

Table D. Direct Costs of Exposure Monitoring (Construction Only)
	Frequency		Responses per Year	Non-Compliance Rate	Non-Compliance Responses per year	Unit Cost	Total Cost
Initial
TWA Sample	First Year	2,520		96%	2,419	$617.26	$1,493,152
2 STEL Samples	First Year	2,520		96%	2,419	$1,234.53	$2,986,328
Subtotal	First Year	2,520			2,419		$4,479,480
Periodic
TWA Sample	Annual	2,716		96%	2,607	$387.29	$1,009,665
2 STEL Samples	Annual	2,716		96%	2,607	$774.57	$2,019,304
Subtotal	Annual	2,716			2,607		$3,028,969
Additional
TWA Sample	Annual	252		96%	242	$387.29	$93,724
2 STEL Samples	Annual	252		96%	242	$774.57	$187,446
Subtotal	Annual	252			242		$281,170

Total $7,789,619

Total average over three years for Construction is:

($4,479,480/3) + $3,028,969 + $281,170 = $4,803,299

Annual Medical Examinations

The agency assumes that employers will incur an initial medical cost for the exams associated with the medical surveillance provision of the rule. The initial medical cost associated with initial medical exams is $591.12, which includes $44.57 for gathering or updating work and medical history, $133.71 for a full physical exam (encompassing both respiratory and skin requirements), $62.82 for a pulmonary function test, $327.05 for a BeLPT, and $229.98 for all additional tests (collectively) that the PLHCP may recommend. For this last element, the agency estimates that 10 percent of the standard medical examinations will lead to further tests recommended by the PLCHP.⁶ The cost for the PLHCP or other medical provider to provide a written medical report to the employee is included in the cost for the medical exams.

The agency estimates that 4,973 workers will be subject to annual medical surveillance, and OSHA estimates a non-compliance rate of 55 percent (4,973 workers) so the total cost for these workers is $1,616,802 (2,735 x $591.12) (See Table E). The cost for the additional exams is included.

Table E – Annual Medical Exam Costs for Construction

Frequency

Basis

Unit Cost

Responses per Year

Non-Compliance Rate

Adjusted Responses

Total Cost

Medical Exam Costs

Biennial

Employee

$591.12

4,973

55%

2,735

$1,616,802

Total Annualized Cost: $1,616,802 ÷ 2 = $808,401

3. Respirator Fit-Test Materials

The agency estimates that it costs employers $1.27 for respirator materials to fit-test each of the 159 employees.

Annual Cost: 159 (employees) x $1.27 (cost for materials) = $202

4. Total Capital Costs

The total costs for this item are the sum of the costs for exposure monitoring, medical examinations, and respirator fit-test materials.

Table F1 – Proposed Estimated Capital Cost

Total Estimated Capital Cost for Construction	Cost
Exposure Monitoring	$7,789,619
Medical Exams	$1,616,802
Respirator Fit Testing Materials	$202
Total Cost for Construction	$9,406,623

Total Capital Cost is: 9,406,623

Total Capital Cost Annualized is: $6,420,303

Table F2 – Annualization of the Proposed Estimated Capital Cost


Three Year Average for the ICR (Only Construction)	Cost
Exposure Monitoring	$4,803,299
Medical Exams	$808,401
Respirator Fit Testing Materials	$202
Total Cost Average over three years for Construction	$5,611,902

Provide estimates of annualized cost to the Federal Government. Also, provide a description Provide estimates of annualized cost to the Federal Government. Also, provide a description of the method used to estimate cost, which should include quantification of hours, operational expenses (such as equipment, overhead, printing, and support staff), and any other expense that would not have been incurred without this collection of information. Agencies may also aggregate cost estimates from Items 12, 13, and 14 in a single table.

There are no costs to the Federal Government.

Explain the reasons for any program changes or adjustments.

OSHA is requesting a new ICR for the collections of information in the beryllium standard for the construction industry, which are currently approved under OMB control number 1218-0267. This program change request would create a new ICR and therefore a new OMB control number for the construction industry standard on occupational exposure to beryllium. The agency is requesting approval for 18,075 total burden hours and the estimated capital cost of $5,611,902.

The Occupational Exposure to Beryllium and Beryllium Compounds in Construction and Shipyard Sectors proposal updates the beryllium standards for the construction and shipyard industries. The proposed changes to the beryllium standard for construction alter certain collection of information requirements in the agency’s previously approved paperwork package under OMB control number 1218-0267. Specifically, the agency is proposing to (1) remove provisions in paragraph (n) that require employers to collect and record employees’ social security numbers; (2) revise the contents of the written exposure control plan in paragraph (f); (3) remove the requirement in paragraph (j) for employers to provide the recipient with a copy of the warning label when transferring materials containing beryllium to another party for use or disposal; (4) remove certain requirements in paragraph (h) related to written warnings; and (5) clarify the requirements related to the medical surveillance services provided by CBD diagnostic centers in paragraph (k)(7)(i).

For collections of information whose results will be published, outline plans for tabulation and publication. Address any complex analytical techniques that will be used. Provide the time schedule for the entire project, including beginning and ending dates of the collection of information, completion of report, publication dates, and other actions.

The information collected under the beryllium standard for construction will not be published.

If seeking approval to not display the expiration date for OMB approval of the information collection, explain the reasons that display would be inappropriate.

OSHA lists current valid control numbers in §§1910.8, 1915.8, 1917.4, 1918.4, and 1926.5 and publishes the expiration date in the Federal Register notice announcing OMB approval of the information collection requirement (see 5 CFR 1320.3(f)(3)). OSHA believes that this is the most appropriate and accurate mechanism to inform interested parties of these expiration dates.

Explain each exception to the certification statement.

OSHA is not requesting an exception to the certification statement.

COLLECTIONS OF INFORMATION EMPLOYING STATISTICAL METHODS

This Supporting Statement does not contain any collection of information requirements that employ statistical methods.

1 The purpose of this Supporting Statement is to analyze and describe the burden hours and costs associated with provisions of the standard that contain collections of information (paperwork) requirements. This Supporting Statement does not provide information or guidance on how to comply with, or how to enforce, these provisions.

2 As a result of the proposal to delete paragraph (m)(2) of the 2017 final standard for construction, OSHA is proposing to renumber paragraph (m)(3) in the construction standard as (m)(2), and revise the reference in paragraph (m)(1)(ii) accordingly.

3 The PEA and FEA tables referenced in this Supporting Statement may be downloaded from www.regulations.gov. The non-compliance rates for the ICR are found under the ICR tab in the PEA spreadsheets.

4 The wage rate information in Table B was derived from Table IV-7 of the PEA.

5 These exposure monitoring unit costs are summarized in the spreadsheets accompanying the PEA for the 2017 rule. (Docket Number: OSHA-H005C-2006-0870-0385).

6 These exposure monitoring unit costs are summarized in Table V-17 of the FEA.

File Type	application/vnd.openxmlformats-officedocument.wordprocessingml.document
Author	Edwards, Doris - OSHA
File Modified	0000-00-00
File Created	2021-01-15

Occupational Exposure to Beryllium in the Construction Industry Supporting Statement 1218-0NEW