5900-240 TPEM Equipment Manufacturer Report

---

Overview

Equip Manufacturer Report
Instructions

---

Sheet 1: Equip Manufacturer Report

United States

US Environmental Protection Agency

Office of Transportation and Air Quality

Transition Program for Equipment Manufacturers

Equipment Manufacturer Report

Version 2.5; Last modified: August 2018

Equipment Manufacturer Basic Information

Submission Date:

Manufacturer Name/Importer:

40 CFR Part:

Contact Name:

Email Address:

Phone #:

Report Year:

Manufacturer Address:

Address 1

Address 2

City

State

ZIP

Country

Are you a Small Volume Manufacturer?

Are you a Foreign Equipment Manufacturer?

Among your comments, please include: (1) If this report covers more than one company, mention their names; (2) any changes from previous years such as a change in parent company. If you are an importer using a foreign manufacturer's allowance under 1039.626(b) and you listed your name above, please indicate the foreign manufacturer's name and address here.

Comments:

TPEM Report Data

For Part 1039 Only:

For Part 89 and Part 1039:

Provide the name of each engine manufacturer that produced non-compliant (flex) engines for your exempted equipment

•In the table below, report how many units you exempted under TPEM (flex equipment). Please include all power categories in which you participated in the current year. You may also include previous years. For each year and power category, report: - Allowance - Select from the drop-down menu the allowance you are using in the specified power category - Start and end dates - first and last year you expect to use an allowance in the specified power category; not just the year you are reporting for. - Exempted Equipment Volume - the number of exempted equipment (flex units) - Total Prod. Volume - your total US-directed production, both exempted and compliant. This is needed to calculate your percent of production and, therefore, only applies if you are using the percent-of-production allowance. - % of Production - If you used the percent-of-production allowance, calculate the percentage of equipment with exempted engines vs. Total Production Volume

Engine Manufacturer Name

Engine Manufacturer Address

NOTE: 40 CFR Part MUST be selected above in order to access drop-down options for Power Category and TPEM Type.

Calendar year

Power Category

TPEM Allowance

Start Date (Year)

End Date (Year)

Exempted Equipment Volume

Total Prod. Volume*

% of Production

2010

TPEM Summary

For Part 89 and Part 1039:

The following table summarizes your overall participation in each power category. Report totals for either 40 CFR Part 89 or Part 1039, according to your selection above. Please refer to the regulations for the maximum number of exempted engines allowed in each power category (see "Instructions" tab). •For the power categories in which you are using the percent-of-production allowance, please provide the cumulative totals and percentages for all the units that you have sold throughout your participation in TPEM. Also, include the maximum allowed cumulative percentage, based on the provisions of §89.102 or §1039.625 . •For the power categories in which you are using the small volume allowance, please provide the cumulative number of units with exempted engines you have sold throughout your participation in TPEM, and the maximum allowed number of units with exempted engines, based on the provisions of §89.102 or §1039.625.

Power Category

Cumulative Exempted Engine Prod. Vol.

TPEM Type

Start Date (Year)

End Date (Year)

Max. Allowed Cumulative Exempted Engine Prod. Vol.

Cumulative % of Production

Max. Allowed Cumulative % of Production

---

Sheet 2: Instructions

United States
US Environmental Protection Agency
Office of Transportation and Air Quality
Transition Program for Equipment Manufacturers
Equipment Manufacturer Report
Version 2.5; Last modified: August 2018
This form is intended for nonroad compression-ignition equipment manufacturers participating in the Transition Program for Equipment Manufacturers (TPEM) to submit their annual report, as required under 40 CFR Part 1039.625(g). This report is due by March 31 of the year after every year you used a TPEM allowance. It may also be used to submit the end-of-the-program report under 40 CFR Part 89. Please note that the Part 89 program has ended, so most manufacturers will be reporting under Part 1039.
As a TPEM participant, you must familiarize yourself with program requirements. You may access TPEM regulations electronically by visiting the Government Printing Office's website at ecfr.gov. If you are importing equipment into the United States, you must also read and comply with §1039.626.
		Click here	to access §1039.625.
		Click here	to access §1039.626.
You will also find the most current forms (templates) and instructions at our website http://www.epa.gov/otaq/certdat2.htm#tpem. Please visit our website each year before completing your report to make sure you are using the most current form.
		Click here	to access the TPEM templates website
Important Points to Remember
1	Completing this form:
	▪	Please complete this form from top to bottom (do not go directly to the report section). Some questions and options will change depending your answers at the beginning of the form.
		- For example, if you select Part 1039 in cell K11, more questions will appear in rows 28-31 than if you select Part 89.
		- You must select a CFR Part for certain drop down menus in the TPEM Report Data section to work.
		▪ The power categories and TPEM allowance options are different under Part 89 and Part 1039. Therefore, the drop-down menu options change depending on the CFR Part selected.
		▪ If no CFR Part is selected, the drop-down menus will be blank.
	▪	If you have questions or need assistance completing this form, please contact us at TPEM-CI@epa.gov or by phone at 734-214-4100
	▪	Do not add tabs or modify this form in any way
		- If the form does not capture the information you want to submit, such as a change in parent company, please add the information in the comments section.
		- You may also email us the information at TPEM-CI@epa.gov.
	▪	Please do not add your own text in the fields that contain drop-down menus. The drop-down menus contain the only possible choices according to the regulations. Adding your own text will
		cause your report to be rejected and we may have to ask you to resubmit.
	▪	If you would like to explain something, do so in the Comments section above. Do not add explanations in other fields. Doing so will cause your report to be rejected
		and we may have to ask you to resubmit.
	▪	Please do not leave blank lines between entries in the "TPEM Report Data section."
2	Submitting this form:
	▪	Please submit this form as an Excel file and email it to TPEM-CI@epa.gov. There is no need to email a PDF copy or mail hard copies. If the form does not capture
		-Please do not submit forms through VERIFY. At this point, we are not prepared to receive and process TPEM forms submitted through VERIFY.
		Click here	to email us.
	▪	Please label your file clearly by including the name of your company, the year for which you are submitting this report, and the words "TPEM EquipMfr Annual Report"
		-For example: MyCompany 2014 TPEM Annual Report.xlsx
3	Need more information? Comments?
	▪	If you have questions, need assistance or have some comments, please contact our TPEM Help Desk at TPEM-CI@epa.gov or by phone at 734-214-4100