In accordance
with 5 CFR 1320, the information collection is approved for three
years.
Inventory as of this Action
Requested
Previously Approved
08/31/2021
36 Months From Approved
12/31/2020
12,497
0
10,770
705,147
0
643,647
0
0
0
RM16-22: Reliability Standard
PRC-027-1: The purpose of proposed Reliability Standard PRC-027-1
is to maintain the coordination of Protection Systems installed to
detect and isolate Faults on Bulk Electric System (BES) Elements,
such that those Protection Systems operate in the intended sequence
during Faults. RM16-20: Reliability Standard PRC-012-2 is to
supersede “pending” Reliability Standards PRC-012-1, PRC-013-1, and
PRC-014-1 and to retire and replace currently-effective Reliability
Standards PRC-015-1 and PRC-016-1. Reliability Standard PRC-012-2
represents substantial improvements over these Reliability
Standards because it streamlines and consolidates existing
requirements; corrects the applicability of previously unapproved
Reliability Standards; and implements a continent-wide RAS review
program.
US Code:
16
USC 824o Name of Law: Federal Power Act
Final Rule in RM16-22. The
purpose of Reliability Standard PRC-027-1 (under FERC-725G) is to
maintain the coordination of protection systems installed to detect
and isolate faults on bulk electric system elements, such that
those protection systems operate in the intended sequence during
faults. The implementation of Reliability Standard PRC-027-1 is
included in FERC-725G and PER-006-1 which is included in
FERC-725Y.
$5,723
No
No
No
No
No
No
Uncollected
Syed Ahmad 202 502-8718
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.