Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 17‐4‐3776; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
SILICON METAL FROM AUSTRALIA, BRAZIL, KAZAKHSTAN, AND NORWAY
This questionnaire must be received by the Commission by November 20, 2017
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning silicon metal from Australia,
Brazil, Kazakhstan, and Norway (Inv. Nos. 701‐TA‐567‐569 and 731‐TA‐1343‐1345 (Final)). The information
requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII.
Name of firm
Address
Website
Has your firm produced or exported silicon metal (as defined on next page) at any time since January 1, 2014?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Data reported in this questionnaire relate to (Check one):
Australia
Brazil
Kazakhstan
Norway
Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/. (PIN: ABKN)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements
Name of Authorized Official Title of Authorized Official
Date
Phone:
Signature
Fax:
Email address
Business Proprietary
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 2
PART I.‐‐GENERAL INFORMATION
Background.‐‐This proceeding was instituted in response to a petition filed on March 8, 2017, by Globe
Specialty Metals, Inc., Beverly, Ohio. Countervailing and antidumping duties may be assessed on the
subject imports as a result of these proceedings if the Commission makes an affirmative determination
of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes
affirmative determinations of subsidization and/or dumping. Questionnaires and other information
pertinent to this proceeding are available at
https://www.usitc.gov/investigations/title_7/2017/silicon_metal_australia_brazil_kazakhstan_and/final.
htm.
Silicon metal covered by these investigations is all forms and sizes of silicon metal, including silicon
metal powder. Silicon metal contains at least 85.00 percent but less than 99.99 percent silicon, and less
than 4.00 percent iron, by actual weight. Semiconductor grade silicon (merchandise containing at least
99.99 percent silicon by actual weight and classifiable under HTSUS subheading 2804.61.0000) is
excluded from the scope of these investigations.
Silicon metal is currently imported under statistical reporting numbers 2804.69.1000 and 2804.69.5000
of the Harmonized Tariff Schedule of the United States (HTSUS). The HTSUS provisions are for
convenience and customs purposes; the written description of the scope is dispositive.
Reporting of information.‐‐If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 3
Valid number error messages.‐‐If you are completing this form in a country that uses periods (“.”) to
delineate multiples of 1000 (e.g., one million would appear as $1.000.000 rather than $1,000,000), you
may be unable to enter in numbers greater than 999 in numeric form fields. The solution to this data
entry issue is to temporarily change your operating system’s number formatting to be consistent with
the U.S. number formatting system while you complete this form. Detailed instructions on how to
resolve this issue is provided at the end of this questionnaire and is available upon request from
Lawrence Jones (202‐205‐3358, lawrence.jones@usitc.gov.
I‐1.
I‐2.
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
20 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
Establishments covered.‐‐Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment” – Each facility of a firm in Australia, Brazil, Kazakhstan, or Norway involved in
the production or export of silicon metal, including auxiliary facilities operated in conjunction
with (whether or not physically separate from) such facilities. Firms operating more than one
establishment in Australia, Brazil, Kazakhstan, or Norway should combine the data for all
establishments in a single country into a single report.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
I‐3.
Page 4
Related producers.‐‐Does your firm or any related firm produce, have the capability to produce,
or have any plans to produce silicon metal in the United States or other countries?
No
Yes‐‐Please name the firm(s) and country(ies) below and, if U.S. producer(s),
ensure that they complete the Commission’s producer questionnaire.
I‐4.
Related U.S. importers.‐‐Does your firm or any related firm import or have any plans to import
silicon metal into the United States?
No
Yes‐‐Please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire.
I‐5.
U.S. importers.‐‐Please provide the names, street addresses (not P.O. boxes), contacts,
telephone numbers, and e‐mail addresses of the FIVE largest U.S. importers of your firm’s silicon
metal in 2016.
Importer’s name
Contact person
Email
Telephone
Share of your
firm’s 2016 U.S.
exports (%)
1
2
3
4
5
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 5
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Lawrence Jones (202‐205‐
3358, lawrence.jones@usitc.gov). Supply all data requested on a calendar‐year basis.
II‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the production of silicon metal since January 1, 2014.
(check as many as appropriate)
(If checked, please describe; leave blank if not applicable)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
II‐3.
Anticipated changes in operations.‐‐Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of silicon metal in the
future?
No
Yes‐‐Supply details as to the time, nature, and significance of such changes
and provide underlying assumptions, along with relevant portions of
business plans or other supporting documentation that address this
issue. Include in the response a specific projection of your firm’s
capacity to produce silicon metal (in short tons contained silicon) for
2017 and 2018.
Page 6
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 7
II‐4a. Production using same machinery.‐‐Please report your firm’s production of products made on
the same equipment and machinery used to produce silicon metal, and the combined
production capacity on this shared equipment and machinery.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” – All production in your establishment(s) in Australia, Brazil, Kazakhstan, and
Norway, including production consumed internally within your firm and production for another
firm under a toll agreement.
Quantity (in short tons)
Calendar years
Item
2014
Overall production capacity
2016
2016
2017
0
0
0
0
0
Weight of other elements
Silicon metal on a total
weight basis
0
0
0
0
0
Out‐of‐scope products:
Semiconductor grade
silicon metal
Ferrosilicon
0
0
0
0
0
Production of:
Silicon metal on contained
silicon basis1
All other products
2
Total production using
same equipment
1
2
2015
January‐September
Data entered for production of silicon metal will populate here once reported in question II‐10.
Please identify these products: .
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 8
II‐4b. Operating parameters.‐‐The production capacity reported in II‐4a is based on operating hours
per week, weeks per year.
II‐4c. Capacity calculation.‐‐Please describe the methodology used to calculate overall production
capacity reported in II‐4a, and explain any changes in reported capacity.
II‐4d. Production constraints.‐‐Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.
II‐4e. Product shifting.‐‐
(i).
Is your firm able to switch production (capacity) between silicon metal and other products
using the same equipment and/or labor?
No
Yes‐‐(i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products:
.
(ii).
Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.
II‐5.
Share of sales.‐‐What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of silicon metal? percent.
II‐6.
II‐7.
Firm's estimated share of production in Australia, Brazil, Kazakhstan, and Norway.‐‐Please
estimate the percentage of total production of silicon metal in the country specified on the
certification page accounted for by your firm’s production in 2016. percent.
Firm's estimated share of country's exports.‐‐Please estimate the percentage of total exports to
the United States of silicon metal from the country specified on the certification page accounted
for by your firm’s exports in 2016. percent.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
II‐8.
Page 9
Inventories in the United States.‐‐Has your firm, since 2014, maintained any inventories of
silicon metal in the United States (not including inventories held by firms identified in question
I‐3)?
“Inventories” – Finished goods inventory, not raw materials or work in progress.
No
Yes‐‐Report the quantity of such end‐of‐period inventories below.
Quantity (in short tons contained silicon)
Calendar year
Item
End‐of‐period
Inventory
II‐9.
2015
2016
2016
Third country trade actions.‐‐Is the silicon metal exported by your firm subject to
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?
No
Yes‐‐List the products(s), countries affected, and the date of such
findings/remedies/proceedings.
2014
January‐September
2017
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 10
II‐10. Trade data.‐‐Report your firm’s production capacity, production, shipments, and inventories
related to the production of silicon metal in your establishment(s) in Australia, Brazil,
Kazakhstan, and/or Norway during the specified periods. Do not include resales of silicon metal
that your firm did not produce in this question; those data to the degree they are exported to
the United States should only be reported in question II‐11.
Do not submit data by manufacturing facility if they are in the same country. If your firm has
multiple manufacturing establishments within one country, you are required to combine data
for those establishments within one foreign producer questionnaire response.
Do not submit data on multiple countries combined. The establishments reported here should
all be located in the country of the firm’s address reported on the certification page.
Multinational companies with production in multiple subject countries should submit separate
foreign producer questionnaire responses for each subject country.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your establishment(s) in Australia, Brazil, Kazakhstan, and
Norway, including production consumed internally within your firm.
“Shipments” – Shipments of products produced in your establishment(s) in Australia, Brazil,
Kazakhstan, or Norway. Quantities reported should be net of returns.
“Home market commercial shipments” – Shipments, other than internal consumption and
transfers to related firms, within Australia, Brazil, Kazakhstan, or Norway.
“Home market internal consumption/transfers to related firms” – Shipments made to
related firms in Australia, Brazil, Kazakhstan, or Norway, including product consumed internally
by your firm.
“Export shipments” – Shipments to destinations outside of the country indicated on page 1
(Australia, Brazil, Kazakhstan, or Norway), including shipments to related firms.
“Inventories” – Finished goods inventory, not raw materials or work‐in‐progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 11
II‐10. Trade data.‐‐Continued.
Quantity (in short tons contained silicon)
Projections1
Actual experience
Calendar year
Item
2014
2
2015
January‐September
2016
2016
2017
Calendar year
2017
2018
Average production capacity (A)
Beginning‐of‐period inventories
(B)
Production (C)
Home market shipments:
Internal consumption/
transfers (D)
Total exports (H)
(should equal F+G)
0
0
0
0
0
0
0
Total shipments (I)
(should equal D+E+F+G)
0
0
0
0
0
0
0
Commercial shipments (E)
Exports to the United States (F)
3
Exports to all other markets (G)
End‐of‐period inventories (J)
1
Please explain the basis for your firm’s projections. .
The production capacity reported is based on operating hours per week, weeks per year. Please
describe the methodology used to calculate production capacity, and explain any changes in reported capacity.
.
3
Identify principal other export markets. .
2
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 12
II‐10. Trade data.‐‐Continued.
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.‐‐Generally, the data reported
for the end‐of‐period inventories (i.e., line J) should be equal to the beginning‐of‐period
inventories (i.e., line B), plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and
G). Please ensure that any differences are not due to data entry errors in completing this form,
but rather actually reflect your firm’s records; and also provide any likely explanations for any
differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.
Actual experience
Projections
Calendar year
Item
2014
January‐September
2015
2016
2016
2017
Calendar year
2017
2018
B + C – D – E – F –G – J =
should equal zero ("0")
or provide an
explanation.1
0
0
0
0
0
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate.
II‐11. Exports to the United States not produced by your firm.‐‐Report your firm’s exports to the
United States of silicon metal that was produced in Australia, Brazil, Kazakhstan, or Norway but
not by your firm during the specified periods. Note these data should not be included in
question II‐10.
Quantity (in short tons contained silicon)
Actual experience
Calendar year
Item
Exports of silicon metal to the
United States not produced by
your firm1
2014
2015
Projections
January‐September
2016
2016
2017
Calendar year
2017
2018
1
List the producer(s).
II‐12. Other explanations.‐‐If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 13
Correcting Valid number error messages.‐‐If you are completing a Commission
questionnaire in a country that uses periods (“.”) to delineate multiples of 1000 (e.g., one million would
appear as $1.000.000 instead of as $1,000,000), you may be unable to enter in numbers greater than
999 in numeric form fields. This issues stem from your computer number formatting setting (e.g., not
the MS Word document itself, but the computer from which you are opening up the document). In the
United States commas (,) delineate multiples of 1000 and periods (.) delineate fractions less than one.
Many EU countries use the reverse where multiples of 1000 are delineated with periods (.) and
fractions less than one are delineated with commas (,). The US International Trade Commission’s
questionnaires are set‐up in the United States with the U.S. number formatting. When this formatting
interacts with a computer set to EU number formatting, we believe this may cause this issue.
The solution to this data entry issue is to temporarily change your operating system’s number
formatting to be consistent with the U.S. number formatting system while you complete the
questionnaire.
To temporarily change your computer’s number settings to U.S. settings, please do the following (for
Microsoft Windows Operating system):
START
Control Panel
Region and Language (under Clock, Language, and Region category)
Format tab
Change the Format from your existing one (e.g., “Italian (Italy)”) to “English (United States)” (see
screen shots below)
When you do this the number “twelve million dollars and thirty five cents” would change from
$12.000.000,35 (Italy format) to $12,000,000.35 (U.S. format), and then there will be no conflict with
the USITC foreign producer questionnaire form. When you finish reporting the data then you can close
the questionnaire and switch back to Italy settings.
Contains Business Proprietary Information
Foreign Producers’ Questionnaire – Silicon Metal (Final)
Page 14
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/title_7/2017/silicon_metal_australia_brazil_kazak
hstan_and/final.htm.
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.‐‐Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: ABKN
• E‐mail.‐‐E‐mail your questionnaire to lawrence.jones@usitc.gov; include a scanned copy of the signed
certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents that are
electronically transmitted to the Commission to protect your sensitive information from unauthorized
disclosure. The USITC secure drop‐box system and the Electronic Document Information System (EDIS)
use Federal Information Processing Standards (FIPS) 140‐2 cryptographic algorithms to encrypt data in
transit. Submitting your nonpublic documents by a means that does not use these encryption algorithms
(such as by email) may subject your firm’s nonpublic information to unauthorized disclosure during
transmission. If you choose a non‐encrypted method of electronic transmission, the Commission warns
you that the risk of such possible unauthorized disclosure is assumed by you and not by the Commission.
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a
scanned copy to the Commission.
Parties to this proceeding.‐‐If your firm is a party to this proceeding, you are required to serve a copy of
the completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | Microsoft Word - Foreign producer--Silicon metal (F) |
| Author | lawrence.jones |
| File Modified | 2017-10-10 |
| File Created | 2017-10-10 |