Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 17‐1‐3717; Expiration Date: 6/30/2020
(No response is required if currently valid OMB control number is not displayed)
U.S. PRODUCERS’ QUESTIONNAIRE
LOW MELT POLYESTER STAPLE FIBER FROM KOREA AND TAIWAN
This questionnaire must be received by the Commission by July 11, 2017
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its review of the antidumping duty investigations concerning low melt polyester staple fiber (PSF) from
Korea and Taiwan (Inv. Nos. 731‐TA‐1378 and 1379 (Preliminary)). The information requested in the questionnaire is
requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed
can result in a subpoena or other order to compel the submission of records or information in your firm’s possession (19
U.S.C. § 1333(a)).
Name of firm
Address
City
State
Zip Code
Website
Has your firm produced low melt PSF (as defined on the next page) at any time since January 1, 2014?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/ (PIN: LMPSF)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings or reviews
conducted by the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceedings may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official Title of Authorized Official
Date
Phone:
Signature
Fax:
Email address
Business Proprietary
U.S. Producers’ Questionnaire ‐ Low melt PSF
Page 2
PART I.—GENERAL INFORMATION
Background.‐‐This proceeding was instituted in response to a petition filed on June 27, 2017, by Nan Ya
Plastics Corporation, America, Livingston, New Jersey. Antidumping duties may be assessed on the
subject imports as a result of these proceedings if the Commission makes an affirmative determination
of injury, threat, or material retardation, and if the U.S. Department of Commerce (“Commerce”) makes
an affirmative determination of dumping. Questionnaires and other information pertinent to this
proceeding are available at
https://www.usitc.gov/investigations/701731/2017/low_melt_polyester_staple_fiber_korea_and_taiwa
n/preliminary.htm.
Low melt polyester staple fiber covered by these investigations is synthetic staple fibers, not carded or
combed, specifically bi‐component polyester fibers having a polyester fiber component that melts at a
lower temperature than the other polyester fiber component, used for bonding fibers together (“low
melt PSF”). The scope includes bi‐component polyester staple fibers of any denier or cut length. The
subject merchandise may be coated, usually with a finish or dye, or not coated.
The following merchandise is excluded from the scope: (1) polyester staple fiber equal to or greater than
3.3 decitex (greater than 3 denier, inclusive) that are not bi‐component fiber, currently classifiable in the
Harmonized Tariff Schedule of the United States at statistical reporting numbers 5503.20.0045 and
5503.20.0065; (2) polyester staple fiber of less than 3.3 decitex (less than 3 denier) that are not bi‐
component fiber, currently classifiable in the Harmonized Tariff Schedule of the United States at
subheadings 5503.20.0025.
Low melt polyester staple fiber is classifiable under statistical reporting number 5503.20.0015 of the
Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheadings are provided
for convenience and customs purposes, the written description of the merchandise under the order is
dispositive.
Reporting of information.‐‐ If information is not readily available from your records in exactly the form
requested, furnish carefully prepared estimates. If your firm is completing more than one questionnaire
in connection with this proceeding (i.e., a producer, importer, and/or purchaser questionnaire), you
need not respond to duplicated questions in the questionnaires.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all of your files, worksheets, and
supporting documents used in the preparation of the questionnaire response. Please also retain a copy
of the final document that you submit.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 3
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
I‐1.
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
50 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I‐1b. TAA information release.‐‐In the event that the U.S. International Trade Commission (USITC)
makes an affirmative final determination in this proceeding, do you consent to the USITC's
release of your contact information (company name, address, contact person, telephone
number, email address) appearing on the front page of this questionnaire to the Departments of
Commerce, Labor, and Agriculture, as applicable, so that your firm and its workers can be made
eligible for benefits under the Trade Adjustment Assistance program?
Yes
No
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
I‐2.
Page 4
Establishments covered.‐‐Provide the city, state, zip code, and brief description of each
establishment covered by this questionnaire. If your firm is publicly traded, please specify the
stock exchange and trading symbol in the footnote to the table. Firms operating more than one
establishment should combine the data for all establishments into a single report.
“Establishment”‐‐Each facility of a firm involved in the production of low melt PSF, including
auxiliary facilities operated in conjunction with (whether or not physically separate from) such
facilities.
Establishments
Covered1
City, State
Zip (5 digit)
Description
1
2
3
4
5
6
1
Additional discussion on establishments consolidated in this questionnaire:
I‐3.
Petition support.‐‐Does your firm support or oppose the petition?
Country
I‐4.
Support
Oppose
Take no position
Korea
Taiwan
Ownership.‐‐Is your firm owned, in whole or in part, by any other firm?
No
Yes‐‐List the following information.
Firm name
Extent of
ownership
(percent)
Address
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
I‐5.
I‐6.
Page 5
Related importers/exporters.‐‐Does your firm have any related firms, either domestic or
foreign, that are engaged in importing low melt PSF into the United States or that are engaged
in exporting low melt PSF to the United States?
No
Yes‐‐List the following information.
Firm name
Country
Affiliation
Related producers.‐‐Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of low melt PSF?
No
Yes‐‐List the following information.
Firm name
Country
Affiliation
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 6
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Porscha Stiger (202‐205‐
3241, porscha.stiger@usitc.gov). Supply all data requested on a calendar‐year basis.
II‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the production of low melt PSF since January 1, 2014.
Check as many as appropriate.
If checked, please describe; leave blank if not
applicable.
Plant openings
Plant closings
Relocations
Expansions
Acquisitions
Consolidations
Prolonged shutdowns or
production curtailments
Revised labor agreements
Other (e.g., technology)
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 7
II‐3a. Production using same machinery.‐‐Please report your firm’s production of products made on
the same equipment and machinery used to produce low melt PSF, and the combined
production capacity on this shared equipment and machinery in the periods indicated.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
Quantity (in 1,000 pounds)
Calendar years
Item
2014
Overall production capacity
2015
January‐March
2016
2016
2017
0
0
0
0
0
PSF other than low melt
with 3 denier or less
PSF other than low melt
with greater than 3 denier
0
0
0
0
0
Production of:
Low melt PSF1
2
Other products
Total
1
2
Data entered for production of low melt PSF will populate here once reported in question II‐7.
Please identify these products: .
II‐3b. Operating parameters.‐‐The production capacity reported in II‐3a is based on operating hours
per week, weeks per year.
II‐3c. Capacity calculation.‐‐Please describe the methodology used to calculate overall production
capacity reported in II‐3a, and explain any changes in reported capacity.
II‐3d. Production constraints.‐‐Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 8
II‐3e. Product shifting.‐‐Is your firm able to switch production (capacity) between low melt PSF and other
products using the same equipment and/or labor?
No
Yes‐‐ (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products: .
II‐3f. Product shifting factors.‐‐Please describe the factors that affect your firm’s ability to shift
production capacity between products (e.g., time, cost, relative price change, etc.), and the degree
to which these factors enhance or constrain such shifts.
II‐4.
Tolling.‐‐Since January 1, 2014, has your firm been involved in a toll agreement regarding the
production of low melt PSF?
“Toll agreement”‐‐Agreement between two firms whereby the first firm furnishes the raw
materials and the second firm uses the raw materials to produce a product that it then returns
to the first firm with a charge for processing costs, overhead, etc.
II‐5.
No
Yes
If yes‐‐ Please describe the toll arrangement(s) and name the firm(s)
involved.
Foreign trade zones.‐‐
(a)
Firm's FTZ operations.‐‐Does your firm produce low melt PSF in and/or admit low melt
PSF into a foreign trade zone (FTZ)?
“Foreign trade zone” is a designated location in the United States where firms utilize
special procedures that allow delayed or reduced customs duty payments on foreign
merchandise. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign‐Trade Zones Act.
No
Yes
If yes‐‐ Describe the nature of your firms operations in FTZs and identify
the specific FTZ site(s).
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
(b)
Page 9
Other firms' FTZ operations.‐‐To your knowledge, do any firms in the United States
import low melt PSF into a foreign trade zone (FTZ) for use in distribution of low melt
PSF and/or the production of downstream articles?
II‐6.
No
Yes
If yes‐‐Identify the firms and the FTZs.
Importer.‐‐Since January 1, 2014, has your firm imported low melt PSF?
“Importer” – The person or firm primarily liable for the payment of any duties on the
merchandise, or an authorized agent acting on his behalf. The importer may be the consignee,
or the importer of record.
No
Yes
If yes‐‐ COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
II‐7.
Page 10
Production, shipment, and inventory data.‐‐Report your firm’s production capacity, production,
shipments, and inventories related to the production of low melt PSF in its U.S. establishment(s)
during the specified periods.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
“Commercial U.S. shipments” –Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” – Product consumed internally by your firm. Such transactions are
valued at fair market value.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
“Export shipments” –Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories”— Finished goods inventory, not raw materials or work‐in‐progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the trade data, as Commission staff may contact your firm regarding questions on the
trade data. The Commission may also request that your company submit copies of the supporting
documents/records (such as production and sales schedules, inventory records, etc.) used to compile
these data.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
II‐7.
Page 11
Production, shipment, and inventory data.‐‐Continued
Quantity (in 1,000 pounds) and value (in $1,000)
Calendar years
Item
2014
2015
January‐March
2016
2016
2017
1
Average production capacity
(quantity) (A)
Beginning‐of‐period inventories
(quantity) (B)
Production (quantity):(C)
U.S. shipments:
Commercial shipments 2
Quantity (D)
Value (E)
3
Internal consumption:
Quantity (F)
2
Value (G)
Transfers to related firms:
Quantity (H)
2
Value (I)
3
4
Export shipments:
Quantity (J)
Value (K)
End‐of‐period inventories
(quantity) (L)
1
The production capacity reported is based on operating
hours per week,
weeks per year. Please describe the
methodology used to calculate production capacity, and explain any changes in reported capacity .
2
What percentage of 2016 commercial U.S. shipments were sold with a coating. percent. Please describe in order of
the volume of sales the coating types of your firm’s low melt PSF: .
3
Internal consumption and transfers to related firms must be valued at fair market value. In the event that your firm uses a
different basis for valuing these transactions, please specify that basis (e.g., cost, cost plus, etc.) and provide value data using
that basis for each of the periods noted above: .
4
Identify your firm’s principal export markets: .
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 12
II‐7.
Production, shipment, and inventory data.‐‐Continued
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.‐‐Generally, the data reported for the
end‐of‐period inventories (i.e., line L) should be equal to the beginning‐of‐period inventories (i.e., line B),
plus production (i.e., line C), less total shipments (i.e., lines D, F, H, and J). Please ensure that any
differences are not due to data entry errors in completing this form, but rather reflect your firm’s actual
records; and, also provide explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2014
B + C – D – F – H – J – L = should equal
zero ("0") or provide an explanation.1
1
2015
0
January‐March
2016
0
2016
0
2017
0
0
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless accurate: .
II‐8.
Channels of distribution.‐‐Report your firm’s commercial U.S. shipments by channel of
distribution.
Quantity (in 1,000 pounds)
Calendar years
Item
2014
2015
January‐March
2016
2016
2017
Channels of distribution:
Commercial U.S. shipments:
To distributors (M)
To end users (N)
RECONCILIATION OF CHANNELS.‐‐Please ensure that the quantities reported for channels of distribution
(i.e., lines M and N) in each time period equal the quantity reported for commercial U.S. shipments (i.e.,
line D) in each time period. If the calculated fields below return values other than zero (i.e., “0”), the
data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation
2014
M + N – D = zero ("0"), if not revise.
0
2015
January‐March
2016
0
2016
0
0
2017
0
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
II‐9.
Page 13
U.S. shipments by denier size and melt point.‐‐Report your firm’s U.S. shipments (i.e., inclusive
of commercial U.S. shipments, internal consumption, and transfers to related firms) by denier
size and melt point.
Quantity (1,000 pounds); Value (in $1,000)
Calendar year 2016
Melting point at
120° F or lower
Item
U.S. shipments.—
Denier size of less than 3
Quantity (O)
Value (P)
Denier size of 3 to 8
Quantity (Q)
Value (R)
Denier size greater than 8
Quantity (S)
Value (T)
Melting point
between 120° F
and 170° F
Melting point at
170° F or greater
RECONCILIATION OF US SHIPMENTS.‐‐Please ensure that the quantities and values reported for
US shipments by denier size and melt point (i.e., lines O through R) here match the data for US
shipments reported in the main trade grid question II‐7 (i.e., lines D through I) in 2016. If the
calculated fields below return values other than zero (i.e., “0”), the data reported must be
revised prior to submission to the Commission.
Reconciliation
Calendar year 2016
Quantity: O + Q + S– D –F – H = zero ("0"), if not revise
0
Value: P + R + T– E –G – I = zero ("0"), if not revise
0
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 14
II‐10. U.S. shipments by recycled PET content.‐‐Report your firm’s U.S. shipments (i.e., inclusive of
commercial U.S. shipments, internal consumption, and transfers to related firms) by recycled
PET content.
Quantity (1,000 pounds); Value (in $1,000)
Item
Calendar year 2016
U.S. shipments.—
100 percent virgin
Quantity (U)
Value (V)
1 2
With any amount of recycled PETcontent
Quantity (W)
Value (X)
1
On average recycled PET content of this merchandise:
percent.
Are there any end use applications in which non‐virgin low melt PSF cannot be used interchangeably
with virgin low melt PSF due to chemical imperfections or other technical limitations: No Yes. If
yes, please describe: .
1
RECONCILIATION OF US SHIPMENTS.‐‐Please ensure that the quantities and values reported for
US shipments by recycled PET content (i.e., lines S through V) here match the data for US
shipments reported in the main trade grid question II‐7 (i.e., lines D through I) in 2016. If the
calculated fields below return values other than zero (i.e., “0”), the data reported must be
revised prior to submission to the Commission.
Reconciliation
Calendar year 2016
Quantity: U + W– D –F – H = zero ("0"), if not revise
0
Value: V + X – E –G – I = zero ("0"), if not revise
0
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 15
II‐11. Employment data.‐‐Report your firm’s employment‐related data related to the production of
low melt PSF and provide an explanation for any trends in these data.
“Production and Related Workers” (PRWs) includes working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production
for plant’s own use (e.g., power plant), recordkeeping, and other services closely associated with
the above production operations. The average number employed may be computed by adding
the number of employees, both full time and part time, for the 12 pay periods ending closest to
the 15th of the month and divide that total by 12. For the January to March periods, calculate
similarly and divide by 3.
“Hours worked” includes time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight time hours.
“Wages paid” –Total wages paid before deductions of any kind (e.g., withholding taxes, old‐age
and unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid
directly by your firm for overtime, holidays, vacations, and sick leave.
Calendar years
Item
2014
Employment data:
Average number of PRWs (number) (O)
2015
January‐March
2016
2016
2017
Hours worked by PRWs (1,000 hours) (P)
Wages paid to PRWs ($1,000) (Q)
Explanation of trends:
II‐12. Related firms.‐‐If your firm reported transfers to related firms in question II‐7, please indicate
the nature of the relationship between your firm and the related firms (e.g., joint venture,
wholly owned subsidiary), whether the transfers were priced at market value or by a non‐
market formula, whether your firm retained marketing rights to all transfers, and whether the
related firms also processed inputs from sources other than your firm.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 16
II‐13. Purchases.‐‐Other than direct imports, has your firm otherwise purchased low melt PSF since
January 1, 2014?
“Purchase” – A transaction to buy product from a U.S. corporate entity such as another U.S.
producer, a U.S. distributor, or a U.S. firm that has imported the product.
“Import” –A transaction to buy from a foreign supplier where your firm is the importer of
record.
No
Yes‐‐Report such purchases below and explain the reasons for your firms'
purchases:
(Quantity in 1,000 pounds)
Calendar years
Item
Purchases from U.S.
importers1 of low melt PSF
from—
Korea
2014
2015
January‐March
2016
2016
2017
Taiwan
All other sources
Purchases from domestic
producers1
Purchases from other
sources2
1
Please list the name of the importer(s) from which your firm purchased this product. If your firm’s import
suppliers differ by source, please identify the source for each listed supplier: .
2
Please list the name of the producer(s) or U.S. distributor(s) from which your firm purchased this product:
.
II‐14. Other explanations.‐‐If your firm would like to further explain a response to a question in Part
IV that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 17
PART III.‐‐FINANCIAL INFORMATION
Address questions on this part of the questionnaire to Janet Freas (202‐205‐3107,
janet.freas@usitc.gov).
III‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax
III‐2. Accounting system.‐‐Briefly describe your firm’s financial accounting system.
A.
When does your firm’s fiscal year end (month and day)?
If your firm’s fiscal year changed during the data‐collection period, explain below:
B.1. Describe the lowest level of operations (e.g., plant, division, company‐wide) for which
financial statements are prepared that include low melt PSF:
2. Does your firm prepare profit/loss statements for low melt PSF:
Yes
No
3. How often did your firm (or parent company) prepare financial statements (including
annual reports, 10Ks)? Please check relevant items below.
Audited, unaudited, annual reports, 10Ks, 10 Qs,
Monthly, quarterly, semi‐annually, annually
4. Accounting basis: GAAP, cash, tax, or other comprehensive basis of
accounting (specify)
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the financial data, as Commission staff may contact your firm
regarding questions on the financial data. The Commission may also request that your company
submit copies of the supporting documents/records (financial statements, including internal
profit‐and‐loss statements for the division or product group that includes low melt PSF, as well as
specific statements and worksheets) used to compile these data.
III‐3.
Cost accounting system.‐‐Briefly describe your firm’s cost accounting system (e.g., standard
cost, job order cost, etc.).
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
III‐4.
Page 18
Allocation basis.‐‐Briefly describe your firm’s allocation basis, if any, for COGS, SG&A, and
interest expense and other income and expenses.
III‐5.
Product listing.‐‐Please list the products your firm produces in the facilities in which it produces
low melt PSF, and provide the share of net sales accounted for by these products in your firm’s
most recent fiscal year.
Products
Share of sales
Low melt PSF
%
%
%
%
%
III‐6.
Does your firm purchase inputs (raw materials, labor, energy, or any services) used in the
production of low melt PSF from any related suppliers (e.g., inclusive of transactions between
related firms, divisions and/or other components within the same company)?
Yes‐‐Continue to question III‐7.
III‐7.
No‐‐Continue to question III‐9a.
Inputs from related suppliers.‐‐Please identify the inputs used in the production of low melt PSF
that your firm purchases from related suppliers and that are reflected in question III‐9a. For
“Share of total COGS” please report this information by relevant input on the basis of your most
recently completed fiscal year. For “Input valuation” please describe the basis, as recorded in
the company’s own accounting system, of the purchase cost from the related supplier; e.g., the
related supplier’s actual cost, cost plus, negotiated transfer price to approximate fair market
value.
Input
Related supplier
Share of total COGS
Input valuation as recorded in the firm’s accounting books and records
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
III‐8.
Page 19
Inputs purchased from related suppliers.‐‐Please confirm that the inputs purchased from
related suppliers, as identified in III‐7, were reported in III‐9a (financial results on low melt PSF)
in a manner consistent with your firm’s accounting books and records.
Yes
No‐‐In the space below, please report the valuation basis of inputs purchased from related
suppliers as reported in table III‐9a.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 20
III‐9a. Operations on low melt PSF.‐‐Report the revenue and related cost information requested below
on the low melt PSF operations of your firm’s U.S. establishment(s).1 Do not report resales of
products. Note that internal consumption and transfers to related firms must be valued at fair
market value. Input purchases from related suppliers should be consistent with and based on
information in the firm’s accounting books and records. Provide data for your firm’s three
most recently completed fiscal years, and for the specified interim periods.
Quantity (in 1,000 pounds) and value (in $1,000)
Fiscal years ended‐‐
Item
2014
2015
January‐March
2016
2016
2017
2
Net sales quantities:
Commercial sales (“CS”)
Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
0
0
0
0
0
Total net sales quantities
2
Net sales values:
Commercial sales
Internal consumption
Transfers to related firms
0
0
0
0
0
Total net sales values
Cost of goods sold (COGS):3
Raw materials
Direct labor
Other factory costs
Total COGS
0
0
0
0
0
Gross profit or (loss)
0
0
0
0
0
Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
0
0
0
0
0
0
0
0
0
0
All other expense items
All other income items
0
0
0
0
0
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
Net income or (loss) before income taxes
Depreciation/amortization included above
1 Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
2
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3 COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers.
Note ‐‐ The table above contains calculations that will appear when you have entered data in the MS
Word form fields.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 21
III‐9b. Raw materials for low melt PSF.—Please indicate the share of total raw material costs reported
in III‐9a in 2016 for the following raw material inputs:
Share of total raw
material costs
(percent)
Products
PTA
%
MEG
%
1
Other
%
Total (should sum to 100 percent)
0.0 %
1
Please indicate any other notable "other" raw materials not expressly identified above
and provide the share of the total raw material costs that they account for:
III‐9c. Financial data reconciliation.‐‐The calculable line items from question III‐9a (i.e., total net sales
quantities and values, total COGS, gross profit (or loss), total SG&A, and net income (or loss))
have been calculated from the data submitted in the other line items. Do the calculated fields
return the correct data according to your firm's financial records ignoring non‐material
differences that may arise due to rounding?
Yes No‐‐If the calculated fields do not show the correct data, please double check the
feeder data for data entry errors and revise.
Also, check signs accorded to the post operating income line items; the two
expense line items should report positive numbers (i.e., expenses are
positive and incomes or reversals are negative‐‐instances of the latter
should be rare in those lines) while the income line item also in most
instances should have its value be a positive number (i.e., income is positive,
expenses or reversals are negative).
If after reviewing and potentially revising the feeder data your firm has
provided, the differences between your records and the calculated fields
persist please identify and discuss the differences in the space below.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 22
III‐10. Nonrecurring items (charges and gains) included in the subject product financial results.‐‐For
each annual and interim period for which financial results are reported in question III‐9a, please
specify all material (significant) nonrecurring items (charges and gains) in the schedule below,
the specific question III‐9a line item where the nonrecurring items are included, a brief
description of the relevant nonrecurring items, and the associated values (in $1,000), as
reflected in question III‐9a; i.e., if an aggregate nonrecurring item has been allocated to question
III‐9a, only the allocated value amount included in question III‐9a should be reported in the
schedule below. Note: The Commission’s objective here is to gather information only on
material (significant) nonrecurring items which impacted the reported financial results of the
subject product in question III‐9a.
Fiscal years ended‐‐
2014
2015
January‐March
2016
2016
2017
Nonrecurring item: In this column please provide a brief
Nonrecurring item: In these columns please report the amount of the relevant
description of each nonrecurring item and indicate the
nonrecurring item reported in question III‐9a.
specific line item in table III‐9a where the nonrecurring item is
classified.
Value ($1,000)
1. , classified as
2. , classified as
3. , classified as
4. , classified as
5. , classified as
6. , classified as
7. , classified as
III‐11. Classification of identified nonrecurring items (charges and gains) in the accounting books and
records of the company.‐‐If non‐recurring items were reported in question III‐10 above, please
identify where your company recorded these items in your accounting books and records in the
normal course of business; i.e., just as responses to question III‐10 identify where these items
are reported in question III‐9a.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 23
III‐12. Asset values.‐‐Report the total assets (i.e., both current and long‐term assets) associated with
the production, warehousing, and sale of low melt PSF. If your firm does not maintain some or
all of the specific asset information necessary to calculate total assets for low melt PSF in the
normal course of business, please estimate this information based upon a method (such as
production, sales, or costs) that is consistent with relevant cost allocations in question III‐9a.
Provide data as of the end of your firm’s three most recently completed fiscal years.
Note: Total assets should reflect net assets after any accumulated depreciation and allowances
deducted.
Total assets should be allocated to the subject products if these assets are also related to other
products. Please provide a brief explanation if there are any substantial changes in total asset
value during the period; e.g., due to asset write‐offs, revaluation, and major purchases.
Value (in $1,000)
Fiscal years ended‐‐
Item
2014
2015
1
Total assets (net)
1
2016
Describe
III‐13. Capital expenditures and research and development expenses.‐‐Report your firm’s capital
expenditures and research and development expenses for low melt PSF. Provide data for your
firm’s six most recently completed fiscal years, and for the specified interim periods.
Value (in $1,000)
Fiscal years ended‐‐
Item
Capital expenditures
2014
1
2015
January‐March
2016
2016
2017
Research and development expenses
1
2
Please describe the nature, focus, and significance of your firm’s capital expenditures on the subject product.
2
Please describe the nature, focus, and significance of your firm’s R&D expenses related to subject product.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 24
III‐14. Data consistency and reconciliation.‐‐Please indicate whether your firm’s financial data for
questions III‐9a, 12, and 13 are based on a calendar year or on your firm’s fiscal year:
Calendar year
Fiscal year Specify fiscal year
Please note the quantities and values reported in question III‐9a should reconcile with the data
reported in question II‐6 (including export shipments) as long as they are reported on the same
calendar year basis.
RECONCILIATION OF TRADE VS FINANCIAL DATA.‐‐Please ensure that the quantities and values reported
for total shipments in part II equal the quantities and values reported total net sales in part III of this
questionnaire in each time period unless the financial data from part III are reported on a fiscal year
basis, in which case only the interim periods must reconcile. If the calculated fields below return values
other than zero (i.e., “0”) and both are being reported on a calendar basis, please explain the discrepancy
below.
Full year data
Reconciliation
2014
Quantity: Trade data from part II
less financial data from part III, = zero
("0") except as noted above.
2015
2016
2017
0
0
Value: Trade data from part II less
financial data from part III, = zero
("0") except as noted above.
0
0
0
Do these data in question III‐9a reconcile with data in question II‐7?
0
0
No
0
2016
0
Yes
0
January‐March
If no, please explain.
Do these data in question III‐9a reconcile with data in question II‐7?
Yes
No
If no, please explain.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 25
III‐15a. Effects of imports on investment.‐‐Since January 1, 2014, has your firm experienced any actual
negative effects on its return on investment or the scale of capital investments as a result of
imports of low melt PSF from Korea and/or Taiwan?
No
Yes‐‐My firm has experienced actual negative effects as follows:
(check as many as appropriate)
(please describe)
Cancellation, postponement,
or rejection of expansion
projects
Denial or rejection of
investment proposal
Reduction in the size of
capital investments
Return on specific
investments negatively
impacted
Other
III‐15b. Does your firm’s response differ by country?
No
Yes
If yes, indicate which country and why:
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 26
III‐16a. Effects of imports on growth and development.‐‐Since January 1, 2014, has your firm
experienced any actual negative effects on its growth, ability to raise capital, or existing
development and production efforts (including efforts to develop a derivative or more advanced
version of the product) as a result of imports of low melt PSF from Korea and/or Taiwan?
No
Yes‐‐My firm has experienced actual negative effects as follows:
(check as many as appropriate)
(please describe)
Rejection of bank loans
Lowering of credit rating
Problem related to the issue
of stocks or bonds
Ability to service debt
Other
III‐16b. Does your firm’s response differ by country?
No
Yes
If yes, indicate which country and why:
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 27
III‐17a. Anticipated effects of imports.‐‐Does your firm anticipate any negative effects due to imports of
low melt PSF from Korea and/or Taiwan?
No
Yes
If yes, my firm anticipates negative effects as follows:
III‐17b. Does your firm’s response differ by country?
No
Yes
If yes, indicate which country and why:
III‐18. Other explanations.‐‐If your firm would like to further explain a response to a question in Part III
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 28
PART IV.‐‐PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Nabil Abbyad (202‐708‐
1446, nabil.abbyad@usitc.gov).
IV‐1. Contact information.‐‐Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part IV.
Name
Title
Email
Telephone
Fax
PRICE DATA
IV‐2. This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2014 of the following products produced by your
firm.
Product 1.‐‐Low melt polyester staple fiber, 4 denier in diameter, 37‐76 mm in cut length,
sheath melt point of 110°C.
Product 2.‐‐Low melt polyester staple fiber, 4 denier in diameter, 37‐76 mm in cut length,
sheath melt point of 180°C.
Product 3.‐‐Low melt polyester staple fiber, 2 denier in diameter, 37‐76 mm in cut length,
sheath melt point of 110°C.
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.‐inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2014‐March 2017, did your firm produce and sell to unrelated U.S. customers
any of the above listed products (or any products that were competitive with these products)?
Yes.‐‐Please complete the following pricing data table(s) as appropriate.
No.‐‐Skip to question IV‐3.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 29
IV‐2(b). Price data.‐‐Report below the quarterly price data1 for pricing products2 produced and sold by
your firm.
Report data in actual pounds (not 1,000s) and actual dollars (not 1,000s).
(Quantity in pounds, value in dollars)
Product 1
Product 2
Quantity
Value
Quantity
Value
Product 3
Period of shipment
Quantity
Value
2014:
January‐March
April‐June
July‐September
October‐December
2015:
January‐March
April‐June
July‐September
October‐December
2016:
January‐March
April‐June
July‐September
October‐December
2017:
January‐March
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods), f.o.b. your firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
IV‐2 (c). Price data checklist.‐‐Please check that the pricing data in question IV‐2(b) has been correctly
reported.
Is the price data reported above:
√ if Yes
In actual dollars (not $1,000) and actual pounds (not 1,000s)?
F.o.b. U.S. point of shipment (i.e., does not include U.S. transport costs)?
Net of all discounts and rebates?
Have returns credited to the quarter in which the sale occurred?
Less than reported commercial shipments in question II‐7 in each year?
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 30
IV‐2 (d). Pricing data methodology.—Please describe the method and the kinds of documents/records
that were used to compile your price data.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used
in the preparation of the price data, as Commission staff may contact your firm regarding
questions on the price data. The Commission may also request that your company submit copies
of the supporting documents/records (such as sales journal, invoices, etc.) used to compile these
data.
IV‐3. Price setting.‐‐How does your firm determine the prices that it charges for sales of low melt PSF
(check all that apply)? If your firm issues price lists, please submit sample pages of a recent list.
Transaction
by
transaction
Contracts
IV‐4.
Annual
total
volume
discounts
No
discount
policy
If other, describe
Other
Describe
Pricing terms.‐‐
(a)
What are your firm’s typical sales terms for its U.S.‐produced low melt PSF?
Net 30
days
Other
Discount policy.‐‐Please indicate and describe your firm’s discount policies (check all that apply).
Quantity
discounts
IV‐5.
Set
price
lists
(b)
Net 60
days
2/10 net
30 days
Other
Other (specify)
On what basis are your firm’s prices of domestic low melt PSF usually quoted (check
one)?
Delivered
F.o.b.
If f.o.b., specify point
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
IV‐6.
Page 31
Contract versus spot.‐‐ Approximately what share of your firm’s sales of its U.S.‐produced low
melt PSF in 2016 was on a (1) long‐term contract basis, (2) annual contract basis, (3) short‐term
contract basis, and (4) spot sales basis?
Share of 2016
IV‐7.
Type of sale
Short‐term
Long‐term
Annual
contracts
contracts
contracts
(multiple
(multiple
(multiple
deliveries for
deliveries for
deliveries for 12
less than 12
more than 12
months)
months)
months)
%
%
%
Total
(should
sum to
100.0%)
Spot sales
(for a single
delivery)
%
0.0
%
Contract provisions.‐‐Please fill out the table regarding your firm’s typical sales contracts for
U.S.‐produced low melt PSF (or check “not applicable” if your firm does not sell on a long‐term,
short‐term and/or annual contract basis).
Item
Short‐term contracts
(multiple deliveries
for less than 12
months)
Annual contracts
(multiple
deliveries for 12
months)
Long‐term contracts
(multiple deliveries for
more than 12 months)
Average contract
duration
No. of
days
365
Price renegotiation
(during contract
period)
Yes
No
Quantity
Price
Both
Yes
No
Typical sales
contract provisions
Fixed quantity
and/or price
Meet or release
provision
Not applicable
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
IV‐8.
Lead times.—What is your firm’s share of sales from inventory vs. produced to order and what
is the typical lead time between a customer’s order and the date of delivery for your firm’s sales
of its U.S.‐produced low melt PSF?
Share of 2016 Lead time (Average
Source
sales
number of days)
From inventory
%
Produced to order
%
Total (should sum to 100.0%)
IV‐9.
Page 32
0.0 %
Shipping information.‐‐
(a)
(b)
(c)
What is the approximate percentage of the cost of U.S.‐produced low melt PSF that is
accounted for by U.S. inland transportation costs? %
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm Purchaser (check one)
Indicate the approximate percentage of your firm’s sales of low melt PSF that are
delivered the following distances from your firm’s production facility.
Distance from production facility
Share
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
0.0 %
IV‐10. Geographical shipments.‐‐In which U.S. geographic market area(s) has your firm sold its U.S.‐
produced low melt PSF since January 1, 2014 (check all that apply)?
Geographic area
√ if applicable
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 33
IV‐11. End uses.‐‐List the end uses of the low melt PSF that your firm manufactures. For each end‐use
product, what percentage of the total cost is accounted for by low melt PSF and other inputs?
Share of total cost of end use product
accounted for by
Total
(should sum to
100.0% across)
End use product
Low melt PSF
Other inputs
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
IV‐12. Substitutes.‐‐Can other products be substituted for low melt PSF?
No
Yes‐‐Please fill out the table.
End use in which this
substitute is used
Substitute
Have changes in the price of this substitute
affected the price for low melt PSF?
No Yes
Explanation
1.
2.
3.
IV‐13. Demand trends.‐‐Indicate how demand within the United States and outside of the United
States (if known) for low melt PSF has changed since January 1, 2014. Explain any trends and
describe the principal factors that have affected these changes in demand.
Market
Overall
No
Overall
increase change decrease
Fluctuate
with no
clear trend
Explanation and factors
Within the United States
Outside the United States
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 34
IV‐14. Product changes.‐‐Have there been any significant changes in the product range, product mix,
or marketing of low melt PSF since January 1, 2014?
No
Yes
If yes, please describe and quantify if possible.
IV‐15. Conditions of competition.‐‐
(a)
Is the low melt PSF market subject to business cycles (other than general economy‐wide
conditions) and/or other conditions of competition distinctive to low melt PSF? If yes,
describe.
Check all that apply.
(b)
Please describe.
No
Skip to question IV‐16.
Yes‐Business cycles (e.g.
seasonal business)
Yes‐Other distinctive
conditions of competition
If yes, have there been any changes in the business cycles or conditions of competition
for low melt PSF since January 1, 2014?
No
Yes
If yes, describe.
IV‐16. Supply constraints.‐‐Has your firm refused, declined, or been unable to supply low melt PSF
since January 1, 2014 (examples include placing customers on allocation or “controlled order
entry,” declining to accept new customers or renew existing customers, delivering less than the
quantity promised, been unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 35
IV‐17. Raw materials.‐‐How have low melt PSF raw material prices changed since January 1, 2014?
Fluctuate
with no
Overall
No
Overall
increase change decrease clear trend
Explain, noting how raw material price changes
have affected your firm’s selling prices for low
melt PSF.
IV‐18. Interchangeability.‐‐Is low melt PSF produced in the United States and in other countries
interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country‐pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Korea
Taiwan
Korea
Taiwan
Other countries
For any country‐pair producing low melt PSF that is sometimes or never interchangeable, identify the
country‐pair and explain the factors that limit or preclude interchangeable use:
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 36
IV‐19. Factors other than price.‐‐Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between low melt PSF produced
in the United States and in other countries a significant factor in your firm’s sales of the
products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country‐pair
Country‐pair
United States
Korea
Taiwan
Korea
Taiwan
Other countries
For any country‐pair for which factors other than price always or frequently are a significant factor in
your firm’s sales of low melt PSF, identify the country‐pair and report the advantages or disadvantages
imparted by such factors:
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 37
IV‐20. Customer identification.‐‐List the names and contact information for your firm’s 10 largest U.S.
customers for low melt PSF since January 1, 2014. Indicate the share of the quantity of your
firm’s total shipments of low melt PSF that each of these customers accounted for in 2016.
Customer’s name
Contact person
Email
Telephone
City
State
Share
of
2016
sales
(%)
1
2
3
4
5
6
7
8
9
10
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 38
IV‐21. Competition from imports
(a)
Lost revenue.‐‐Since January 1, 2014: To avoid losing sales to competitors selling low
melt PSF from Korea and/or Taiwan, did your firm:
Item
No
Yes
(b)
Reduce prices
Roll back announced price increases
Lost sales.‐‐Since January 1, 2014: Did your firm lose sales of low melt PSF to imports of
this product from Korea and/or Taiwan?
No
Yes
(c)
The submission of lost sales/lost revenue allegations is to be completed only by NON‐
PETITIONERS.
If your firm indicated “yes” to any of the above, your firm can provide the Commission
with additional information by downloading and completing the lost sales/lost revenues
worksheet at http://usitc.gov/trade_remedy/question.htm. Note that the Commission
may contact the firms named to verify the allegations reported.
Is your firm submitting the lost sales/lost revenues worksheet?
No—Please explain.
Yes—Please complete the worksheet and submit via the Commission
dropbox. https://dropbox.usitc.gov/oinv/. (PIN: LMPSF)
IV‐22. Other explanations.‐‐If your firm would like to further explain a response to a question in Part
IV that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire – Low melt PSF
Page 39
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2017/low_melt_polyester_staple_fiber_k
orea_and_taiwan/preliminary.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: LMPSF
• E‐mail.—E‐mail the MS Word questionnaire to porscha.stiger@usitc.gov; include a scanned copy of
the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop‐box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140‐2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non‐encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm does not produce this product, please fill out page 1, print, sign, and submit a scanned copy
to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | Microsoft Word - US producer--Low melt PSF (P) |
| Author | porscha.stiger |
| File Modified | 2017-06-28 |
| File Created | 2017-06-28 |