D RAFT – DO NOT DISTRIBUTE USGS Fort Collins Science Center
Social and Economic Analysis Branch
2017 Users of Landsat Imagery Survey
Thank you for participating in this study of Landsat satellite imagery! This survey will take about 20 minutes to complete. To move through the survey, click only on the “Next” and “Back” buttons at the bottom of the page in the survey. To pause at any time, simply close the window and your answers will be saved. To resume and complete the survey, just click on the link to the survey in the email you received. At that point, you can answer any remaining questions and/or edit any of your previous responses. When you have answered all of the questions and are satisfied with your responses, click on the “Submit” button at the end of the survey.
SECTION 1: Use of Landsat Imagery
Have you used Landsat imagery in your work in the past year? Please select only one answer.
Yes
NoEND
------------------------------------------------PAGE BREAK-------------------------------------------------
What percentage of your work used Landsat imagery in the past year? Please write a number from 1 to 100 in the box below or check “Don’t know”.
Percentage |
|
|
|
What other remotely sensed imagery do you use in your work?
None, I only use Landsat.
Low-resolution multispectral satellite imagery, such as MODIS
Other moderate-resolution multispectral satellite imagery, such as Sentinel
High-resolution multispectral satellite imagery, such as WorldView
Airborne multispectral imagery
Airborne photography
LiDAR
Radar
Other (please specify)_____________________________________________
Of your work that used Landsat imagery, what percentage was operational and non-operational?
Operational work is defined as continuous or ongoing work that either relies on the consistent availability of Landsat imagery OR is mandated or required (e.g., crop reports, routine mapping, monitoring).
Non-operational work is defined as one-time projects OR other work that is not mandated (e.g., most scientific research).
Please enter a number from 0 to 100 on each line. The total must equal 100.
Operational |
|
Non-operational |
|
Total |
100% |
Approximately how many unique Landsat scenes did you use in your work in the past year? Please enter a whole number in the box below or check “Don’t know”. If you used the same scene more than once, only count that scene one time. If you are unsure how many scenes you used, please provide your best estimate.
Number of scenes |
|
|
|
As part of the free and open data policy, there are no restrictions on distributing Landsat imagery. Beyond using Landsat in your own work, did you distribute Landsat imagery or products to other users in the past year? Please check only one.
Yes
No Q11
------------------------------------------------PAGE BREAK-------------------------------------------------
What type of Landsat imagery or products did you distribute? Please check all that apply.
Raw or minimally processed Landsat imagery (e.g., Level 0 uncalibrated raw data, Level 1 radiometrically calibrated and orthorectified data)
Landsat products developed by USGS (e.g., Level 2 Surface Reflectance, Level 2 Land Surface Temperature, Level 3 Burned Area)
Landsat products I developed myself
In the past year, approximately how many users did you distribute Landsat imagery or products to? Please write a whole number in the box below or check “Don’t know”.
Number of users |
|
|
|
In which sectors did these users work? Please check all that apply.
Academic institution as faculty, staff, or student (e.g., university, college, technical/vocational)
International government (e.g., United Nations, European Union)
National/Federal government
State/Provincial/Departmental government
Local government (for example, county, city)
Tribe/Nation/Indigenous government
Private business
Non-profit organization
Other (please specify) _________________________________
In the past year, approximately how many Landsat scenes (processed into a product or not) did you distribute to these other users? Please enter a whole number in the box below or check “Don’t know”. Count all scenes you distributed, even if you distributed the same scene multiple times. If you are unsure how many scenes you distributed, please provide your best estimate.
Number of scenes |
|
|
|
------------------------------------------------PAGE BREAK-------------------------------------------------
What is the primary application for which you have used Landsat imagery in your work in the past year? Please select only one. You will be able to select a secondary application in a subsequent question.
Agricultural forecasting
Agricultural management/production/conservation
Biodiversity conservation
Climate science/change
Coastal science/monitoring/management
Cryospheric science (for example, sea ice, ice caps, glaciers, permafrost)
Ecological/ecosystem science/monitoring
Fish and wildlife science/management
Fire science/management
Forest science/management
Geology/volcanology
Land use/land cover change
Range/grassland science/management
Recreation science/management
Water resources (for example, watershed management, water rights, hydrology)
Energy (for example, oil, natural gas, coal)/metals/minerals exploration/extraction/development
Alternative energy exploration/development (e.g., wind, solar, geothermal)
Rural planning and development (for example, zoning, economic development, land use)
Urban planning and development (for example, zoning, economic development, land use)
Urbanization (for example, growth, sprawl)
Engineering/construction/surveying
Assessments and taxation
Real estate/property management
Art/media
Cultural resource management/anthropology/archaeology
Software development
Telecommunications
Transportation
Utilities
Education: K-12
Education: university/college
Technical training (for example, workshops, short courses)
Emergency/disaster management
Hazard insurance (for example, crop, flood, fire)
Humanitarian aid
Public health
Defense/national security
Environmental regulation
Law enforcement
Other application (please specify) _____________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
Which one of these environmental parameters have you derived most often from Landsat imagery for your primary application in the past year? Please select only one.
Crop stage/crop yield
Crop type
Non-photosynthetic vegetation
Active fires
Burned area extent/severity
Land cover/land use/vegetation type
Canopy cover/biomass
Vegetation index/phenology/leaf area index
Vegetation condition/stress/vigor/disturbance
Vegetation height/structure
Land skin temperature
Land surface elements/infrastructure (natural and man-made elements)
Surface reflectance/albedo
Bathymetry
Lake/river water temperature
Surface water extent
Water quality/water chemistry
Glacier/ice sheet extent
Lake/river ice extent
Snow cover extent
Other parameter (please specify) _____________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
In addition to the primary application, in what main secondary area have you used Landsat imagery in your work in the past year? Please select only one.
I have not used it in another area.Q14
Agricultural forecasting
Agricultural management/production/conservation
Biodiversity conservation
Climate science/change
Coastal science/monitoring/management
Cryospheric science (e.g., sea ice, ice caps, glaciers, permafrost)
Ecological/ecosystem science/monitoring
Fish and wildlife science/management
Fire science/management
Forest science/management
Geology/volcanology
Land use/land cover change
Range/grassland science/management
Recreation science/management
Water resources (for example, watershed management, water rights, hydrology)
Energy (for example, oil, natural gas, coal)/metals/minerals exploration/extraction/development
Alternative energy exploration/development (for example, wind, solar, geothermal)
Rural planning and development (for example, zoning, economic development, land use)
Urban planning and development (for example, zoning, economic development, land use)
Urbanization (for example, growth, sprawl)
Engineering/construction/surveying
Assessments and taxation
Real estate/property management
Art/media
Cultural resource management/anthropology/archaeology
Software development
Telecommunications
Transportation
Utilities
Education: K-12
Education: university/college
Technical training (for example, workshops, short courses)
Emergency/disaster management
Hazard insurance (for example, crop, flood, fire)
Humanitarian aid
Public health
Defense/national security
Environmental regulation
Law enforcement
Other application (please specify) _____________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
Which one of these environmental parameters have you derived most often from Landsat imagery for your secondary application in the past year? Please select only one.
Crop stage/crop yield
Crop type
Non-photosynthetic vegetation
Active fires
Burned area extent/severity
Land cover/land use/vegetation type
Canopy cover/biomass
Vegetation index/phenology/leaf area index
Vegetation condition/stress/vigor/disturbance
Vegetation height/structure
Land skin temperature
Land surface elements/infrastructure (natural and man-made elements)
Surface reflectance/albedo
Bathymetry
Lake/river water temperature
Surface water extent
Water quality/water chemistry
Glacier/ice sheet extent
Lake/river ice extent
Snow cover extent
Other parameter (please specify) _____________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
SECTION 2: Landsat Features
What spatial resolution would result in a significant improvement in deriving the environmental parameters for your primary application of Landsat imagery? Please select only one.
No significant improvement would occur with spatial resolution better than 30 meters. Q17
20 meters
15 meters
10 meters
5 meters
<5 meters
------------------------------------------------PAGE BREAK-------------------------------------------------
What benefits would you expect to see if this improvement in spatial resolution occurred? Please consider scientific, management, economic, and social benefits. (Open-ended – limit 1500 characters)
------------------------------------------------PAGE BREAK-------------------------------------------------
In the past year, on average, how many days elapsed between obtaining cloud-free, usable Landsat scenes to derive the environmental parameters for the most important project within your primary application? Depending on the area of the world their work is conducted, some people may have been able to obtain usable imagery every 8 days, while others may have only been able to obtain it every 32 days or longer. Please write a whole number in the box below.
|
days |
How often would you need cloud-free, usable Landsat imagery to result in a significant improvement in deriving the environmental parameters for the most important project within your primary application? Please write a whole number in the box below or check “No significant improvement would occur if usable Landsat imagery were available more often.”
|
days |
OR
No significant improvement would occur if usable Landsat imagery were available more often.
If Q18 has a number, go to Q19. If Q18 has no number and box checked or does not have a response, go to Q20.
------------------------------------------------PAGE BREAK-------------------------------------------------
What benefits would you expect to see if this improvement in the availability of usable Landsat imagery occurred? Please consider scientific, management, economic, and social benefits. (Open-ended – limit 1500 characters)
------------------------------------------------PAGE BREAK-------------------------------------------------
In the past year, which of the current spectral bands of Landsat imagery have you used in deriving environmental parameters for your primary application? Please check all that apply.
Band 1 – Ultra Blue (coastal/aerosol; 0.43 - 0.45 μm)
Band 2 – Blue (0.45 - 0.51 μm)
Band 3 – Green (0.53 - 0.59 μm)
Band 4 – Red (0.64 - 0.67 μm)
Band 5 – Near Infrared (NIR; 0.85 - 0.88 μm)
Band 6 – Shortwave Infrared (SWIR; 11.57 - 1.65 μm)
Band 7 – Shortwave Infrared (SWIR; 22.11 - 2.29 μm)
Band 8 – Panchromatic (0.50 - 0.68 μm)
Band 9 – Cirrus (1.36 - 1.38 μm)
Band 10 – Thermal Infrared (TIRS; 110.60 - 11.19 μm)
Band 11 – Thermal Infrared (TIRS; 211.50 - 12.51 μm)
What changes in or additions to the current spectral bands of Landsat imagery would result in a significant improvement in deriving the environmental parameters for your primary application? Please consider changes to existing bands as well as new bands. Write your response in the box below OR check “No significant improvement would occur if the current spectral bands changed.” (Open-ended – limit 1500 characters)
OR
No significant improvement would occur if the current spectral bands changed.
If Q21 has a written response, go to Q22. If Q21 has no written response and box checked or does not have a response, go to Q23.
------------------------------------------------PAGE BREAK-------------------------------------------------
What benefits would you expect to see if these changes in the spectral bands of Landsat imagery occurred? Please consider scientific, management, economic, and social benefits. (Open-ended – limit 1500 characters)
------------------------------------------------PAGE BREAK-------------------------------------------------
The previous questions focused on the ideal features for imagery which best measures the environmental parameters within your primary application. However, in the real world, trade-offs between features have to be made when selecting imagery. With that in mind, we would like you to consider the four options below. The first option contains the features of Landsat 8 imagery, including the zero dollar price tag. The other three options represent potential imagery that you could purchase in the private market. These options have various improvements over Landsat 8 data, such as better spatial resolution or higher frequency of acquisition, but they also cost money. While considering your current project/organizational budget and the environmental parameters you need to derive for your primary application, please rank these options from most preferred (represented by 1) to least preferred (represented by 4), using each number once.
NOTE FOR REVIEWERS: This matrix and the one for Q24 will be different for each respondent. While the Landsat 8 column will remain the same, the three hypothetical imagery options will consist of different combinations of the attributes seen here. Cost will also vary. The responses to these questions will be analyzed using a stated choice approach which enable a comparison of the importance of each attribute in selecting imagery.
Features of the imagery |
Landsat 8 |
Option A |
Option B |
Option C |
Spatial resolution |
30 meters |
5 meters |
10 meters |
20 meters |
Frequency of revisit (every [X] days – does not ensure a usable image at every revisit) |
16 days |
8 days |
5 days |
1 day |
Spectral bands |
Landsat 8 bands |
Landsat 8 bands |
Landsat 8 bands plus additional bands |
Landsat 8 bands plus additional bands |
Thermal band |
Has two bands |
Has one band |
Has two bands |
Has no thermal bands |
Cost per image downloaded |
$0 |
$X where $X>0 |
$Y where $Y>0 |
$Z where $Z>0 |
Rank the options from 1 to 4, with 1 being the most preferred and 4 being least preferred. |
____ |
____ |
____ |
____ |
------------------------------------------------PAGE BREAK-------------------------------------------------
If cost was not a consideration, which of these would be your preferred options? While considering the environmental parameters you need to measure within your primary application, please rank these options from most preferred (represented by 1) to least preferred (represented by 4), using each number once.
Features of the imagery |
Landsat 8 |
Option A |
Option B |
Option C |
Spatial resolution |
30 meters |
5 meters |
10 meters |
20 meters |
Frequency of revisit (every [X] days – does not ensure a usable image at every revisit) |
16 days |
8 days |
5 days |
1 day |
Spectral bands |
Landsat 8 bands |
Landsat 8 bands |
Landsat 8 bands plus additional bands |
Landsat 8 bands plus additional bands |
Thermal band |
Has two bands |
Has one band |
Has two bands |
Has no thermal bands |
Rank the options from 1 to 4, with 1 being the most preferred and 4 being least preferred. |
____ |
____ |
____ |
____ |
------------------------------------------------PAGE BREAK-------------------------------------------------
Ideally, how soon would you need Landsat imagery after it has been acquired? Please check only one.
Same day/Near real time
Within 2-3 days
Within one week
Within a month
In the same season it was acquired
In the same year it was acquired
Does not matter
In the past year, what has been your primary source of the Landsat imagery you have used in your work? Please check only one.
USGS portals such as Earth Explorer and GloVIS
NASA Earthdata
Google Earth Engine
Amazon Web Services
AmericaView
University/college
Other (please specify)___________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
How likely would you be to use the following imagery options if they were offered by USGS? Please select one option in each row.
Landsat imagery options |
Very unlikely |
Somewhat unlikely |
Neither likely nor unlikely |
Somewhat likely |
Very likely |
A subset of specific bands (e.g., downloading only red, green, and blue bands) |
-2 |
-1 |
0 |
1 |
2 |
A portion of a scene (e.g., a crop or shapefile tool for selection of a specific area within a scene) |
-2 |
-1 |
0 |
1 |
2 |
Analysis-ready data (e.g., tiled co-registered data cube ideal for time series analysis) |
-2 |
-1 |
0 |
1 |
2 |
------------------------------------------------PAGE BREAK-------------------------------------------------
How critical are (or will be, once developed) the following Landsat data products for your work? Please select one option in each row.
Landsat data product |
Not at all critical |
Somewhat critical |
Critical |
Very critical |
Cannot do my work without it |
Level 0 (uncalibrated raw data) |
0 |
1 |
2 |
3 |
4 |
Level 1 (radiometrically calibrated and orthorectified data) |
0 |
1 |
2 |
3 |
4 |
Level 1 Web-enabled Landsat Data (WELD) composited mosaics |
0 |
1 |
2 |
3 |
4 |
Level 2 Surface Reflectance |
0 |
1 |
2 |
3 |
4 |
Level 2 Land Surface Temperature |
0 |
1 |
2 |
3 |
4 |
Level 3 Burned Area (provisional) |
0 |
1 |
2 |
3 |
4 |
Level 3 Dynamic Surface Water Extent (provisional) |
0 |
1 |
2 |
3 |
4 |
Level 3 Fractional Snow Covered Area (provisional) |
0 |
1 |
2 |
3 |
4 |
Level 3 Land cover and change product (in development) |
0 |
1 |
2 |
3 |
4 |
------------------------------------------------PAGE BREAK-------------------------------------------------
SECTION 3: Value of Landsat
In the event that Landsat imagery was no longer available, you may have to obtain imagery elsewhere. Assume that you are restricted to your current project or organization budget level and that the money to pay any cost for replacement imagery and additional software or training would have to come out of your existing budget. If you had to pay for imagery that was equivalent to currently available Landsat imagery, would you pay $XXX for one scene covering the area equivalent to a Landsat scene?
Yes
No Q34
------------------------------------------------PAGE BREAK-------------------------------------------------
How certain are you that you would pay $XXX for the imagery? Please select the percentage that best represents your answer.
|
| | | |-
| | |- | | |
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Not Certain |
|
|
|
Very Certain |
Approximately how many scenes would you buy per year if each scene cost $XXX? Please write a whole number in the box below. (Open-ended – limit 10 characters)
------------------------------------------------PAGE BREAK-------------------------------------------------
If the cost was $(1.25x bid amount in Q28), would you pay this amount for one scene covering the area equivalent to a Landsat scene?
Yes
No Q40
------------------------------------------------PAGE BREAK-------------------------------------------------
Approximately how many scenes would you buy per year if each scene cost $(1.25x original)? Please write a whole number in the box below. (Open-ended – limit 10 characters) Q40
------------------------------------------------PAGE BREAK-------------------------------------------------
How certain are you that you would not pay $XXX for the imagery? Please select the percentage that best represents your answer.
|
| | | |-
| | |- | | |
0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
Not Certain |
|
|
|
Very Certain |
------------------------------------------------PAGE BREAK-------------------------------------------------
If the cost was $(0.75x bid amount in Q28), would you pay this amount for one scene covering the area equivalent to a Landsat scene?
Yes
No Q37
------------------------------------------------PAGE BREAK-------------------------------------------------
Approximately how many scenes would you buy per year if each scene cost $(0.75x original)? Please write a whole number in the box below. (Open-ended – limit 10 characters) Q40
------------------------------------------------PAGE BREAK-------------------------------------------------
If the cost was $1, would you pay this amount for one scene covering the area equivalent to a Landsat scene?
Yes
No Q39
------------------------------------------------PAGE BREAK-------------------------------------------------
Approximately how many scenes would you buy per year if each scene cost $1? Please write a whole number in the box below. (Open-ended – limit 10 characters) Q40
------------------------------------------------PAGE BREAK-------------------------------------------------
Why you would not pay $1 for the imagery? Please check all that apply.
Landsat imagery is not worth that much money to me.
My projects/organization cannot afford to pay that much for Landsat imagery.
Even if I wanted to, I do not have a way to pay for the imagery (e.g., do not have a credit card or other electronic method of payment available).
Landsat imagery should be provided free of charge since my tax dollars already paid for it.
I would use other imagery available at no cost.
Other (please specify)_____________________________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
Satellite imagery such as Landsat can require significant preprocessing before beginning analyses, particularly time-series analyses that use data from different Landsat sensors. Analysis-ready data is built from imagery from multiple Landsat sensors which has been corrected to ensure spatial alignment and calibration consistency through time. Each pixel in a given tile occupies the same location as in the tiles collected before and after it, enabling time-series analyses. Each non-overlapping tile measures 5,000 by 5,000 pixels. If a stack of tiles of Landsat time series analysis-ready data, including the most current to the oldest, for a location relevant to your work, cost you $Y, would you choose to purchase this data? Please take your current project/organization budget into account when deciding whether you would pay this amount.
Yes Q42
No
------------------------------------------------PAGE BREAK-------------------------------------------------
Why would you not pay this amount for analysis-ready Landsat data? Please check all that apply.
I do not conduct time series analyses with Landsat imagery.
Analysis-ready data is not worth that much money to me.
My projects/organization cannot afford to pay that much for analysis-ready data.
Even if I wanted to, I do not have a way to pay for the imagery (e.g., do not have a credit card or other electronic method of payment available).
Analysis-ready data should be provided free of charge like other Landsat products.
Other (please specify)_____________________________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
SECTION 4: Work experience
In what sector do you work? Please select only one answer. If you work for more than one entity, select the sector in which you spend more of your time working.
Academic institution as faculty, staff, or student (e.g., university, college, technical/vocational) Q43 (all other responses Q44)
International government (e.g., United Nations, European Union)
National/Federal government
State/Provincial/Departmental government
Local government (for example, county, city)
Tribe/Nation/Indigenous government
Private business
Non-profit organization
Other (please specify) _________________________________
------------------------------------------------PAGE BREAK-------------------------------------------------
What is your current role at your academic institution?
Faculty or staff (e.g., professor, researcher, postdoctoral researcher)
Graduate student
Undergraduate student
------------------------------------------------PAGE BREAK-------------------------------------------------
How many years have you been using remotely sensed imagery? Please write a whole number in the box below. If less than one year, just write 1.
Years |
|
------------------------------------------------PAGE BREAK-------------------------------------------------
Thank you for completing this survey! The space below is provided for any additional comments you may have. Please click the Submit button when you are finished. (Open-ended - limit 1500 characters)
File Type | application/vnd.openxmlformats-officedocument.wordprocessingml.document |
File Title | Users of Landsat Imagery |
Author | pondsp |
File Modified | 0000-00-00 |
File Created | 2021-01-22 |