Attachment 3

United States
Environmental Protection
Agency

Office of Chemical
Safety and Pollution
Prevention

Application and
Instructions for
Training Providers

EPA Form 8500-25

September 2011
http://www.epa.gov/lead

Applying for Accreditation of LeadBased Paint Activity and
Renovation Training Programs

[This page intentionally left blank.]

Form Approved OMB No.2070-0155 Expires 12/31/15

ACCREDITATION APPLICATION

U.S. ENVIRONMENTAL PROTECTION AGENCY

Important: Consult the instructions provided for training programs applying for accreditation to complete this form.
Please type or print response in black or blue ink only.

A. General Information

Official Use Only

Select one of the following application types:
Accreditation application

For information on EPA and other Lead
Programs, see: http://www.epa.gov/lead.

Re-accreditation application
Adding jurisdiction[s] to accreditation

Check to be listed on EPA’s web site:

Amending accreditation (check all types that apply)
New training manager

FOR TRAINING PROVIDERS

New instructor

New training location

For Evaluation and Abatement

Other

Replacement of a certificate

For Renovation

I do not want to be listed
Indicate the course[s] for which you seek accreditation or re-accreditation. List all EPA-run
jurisdiction[s] in which you intend to conduct lead-based paint activity training. An EPA-run jurisdiction includes an EPA-run state, a U.S. territory, or
all Indian tribal land[s] in any one EPA Region. Attach additional sheets of paper as necessary. EPA accreditation for renovator, and/or dust
sampling technician training is valid in all EPA-run jurisdictions (i.e., National Accreditation).
The fee you must pay depends on the number of disciplines and/or EPA-run jurisdiction[s] in which you plan to conduct lead-based paint training.
See the fees schedule in the instructions to determine your fee. The total fee listed below should include fees calculated on any additional sheets.
I=Initial
R=Refresher

Inspector
I
R

Supervisor
I
R

Risk
Assessor
I
R

Project
Designer
I
R

Abatement
Worker
I
R

Renovator
I
R

Dust Sampling
Technician
I
R

Fee

st

1 EPA-run jurisdiction
(pay base fee only)

$

nd

2 EPA-run jurisdiction

$
$

National Accreditation

Check here if you are listing additional EPA-run jurisdiction[s]. List each additional jurisdiction in the box below as necessary
(N/A to renovators and dust sampling technicians). Each additional jurisdiction is $35 per discipline,
per jurisdiction. See the definition of EPA-run jurisdiction[s] and the fee examples in the instructions.
For current listing of EPA-run jurisdictions, see www.epa.gov/lead, or call 1-800-424-LEAD.
Courses in electronic learning format, or a language other than English (list each course and language separately):
($

for initial course, $

for refresher course, and $

Total Fee: $

for each additional EPA-run jurisdiction per language)

Do you request a
fee waiver as a:

Local Government

State Government

Federally Recognized Indian Tribe

Nonprofit

(Nonprofit means an entity that has demonstrated to any branch of the Federal Government, or to a state, municipal, tribal, or territorial government,

that no part of its net earnings inures to the benefit of any private shareholder or individual.)

If your training program designation is nonprofit, specify the IRS-issued number below and submit a copy of an official
IRS letter confirming such designation. If another agency/state has designated your nonprofit status, indicate the
agency/state and corresponding identification number and attach appropriate documentation.
501(c)(3)

501(c)(5)
IRS-issued #

501(c)(9)
IRS-issued #

Other

IRS-issued #

B. Applicant Information
Name of Training Program & Street Address:

Business, State, Agency, etc.

Street Address, Suite Number (Please no P.O. Box)

Mailing Address:

Address

City

State

Zip Code

City

State

Zip Code

Applicant’s Phone #:
Applicant’s E-mail Address:
EPA Form 8500-25 (Rev 9/11)

ext.

Fax #:

Form Approved OMB No.2070-0155 Expires 12/31/15

Please list all types of facilities and locations at which training will take place and indicate if you plan to train at
nonpermanent facilities. Attach additional sheets of paper, as necessary.
Type of Facility

Street Address, Suite Number (Please no P.O. Box)

City

State

Zip Code

Type of Facility

Street Address, Suite Number (Please no P.O. Box)

City

State

Zip Code

Do you plan to provide training at non-permanent facilities

Yes

No

Note: A non-permanent facility is accessed by the training provider (typically through a rental or short-term lease agreement) on a one-time or

occasional basis. This would include motel facilities and other locations that serve as a temporary training location.

C. Qualifications of Training Program Manager
Name of Training Program Manager:

Last

First

Middle

Training Program Manager’s Title:
Previous and/or Maiden Name(s), if applicable:
Teaching Workers or Adults Requirement of §745.225(c)(1)(i), (ii), or (iii):
Check one of the following:
Experience

or

Education

or

Training

or

Bachelors

or graduate degree in
any field

or
Experience managing
a training program specializing in
environmental hazards

Check the supporting documentation attached for the box checked above (submit documentation with application):
Training
Bachelors
Management
Experience
Education
Experience
Certificate
Diploma
Resume
Diploma
Letter of Reference

Resume

Transcript

Transcript

Letter of Reference

Documentation of

Work Experience

Documentation of
Work Experience

Construction Industry Requirement of §745.225(c)(1)(iv):
Check one of the following:
Experience

or

Education

or

Training

Check the supporting documentation attached for the box checked above (submit documentation with application):
Experience
Education
Training
Resume

Diploma

Certificate

Letter of Reference

Transcript

Documentation of Work Experience

D. Qualifications of Principal Course Instructor (Attach a separate sheet for each individual.)
Name of Principal Course Instructor for each course:

(If more than one, attach additional sheets.)

Last

First

Middle

Previous and/or Maiden Name(s), if applicable:
Teaching Workers or Adults Requirement of §745.225(c)(2)(i):
Check one of the following:
Experience

or

Education

or

Training

Check the supporting documentation attached for the box checked above (submit documentation with application):
Experience
Education
Training
Resume

Diploma

Letter of Reference

Transcript

Documentation of Work Experience

EPA Form 8500-25 (Rev 9/11)

Certificate

Form Approved OMB No.2070-0155 Expires 12/31/15

Completion of (16 hrs) Accredited Lead-specific Training Requirement of §745.225(c)(2)(ii):
Check as many that apply and complete information for each. Attach additional sheets of paper, as necessary.
(Note: 16 hours of training are required for instructors of lead-based activities courses and 8 hours for renovator or dust sampling courses)

Discipline:

Inspector

Supervisor

Renovator (8hrs)

Risk Assessor

Project Designer

Abatement Worker

Dust Sampling Technician (8hrs)

Name of Trainer:

Name of Training Program:

Training Program Address:

Street Address, Suite Number

Training Program Phone #:

City

ext.

State

Date Training Completed:

Zip Code

Month/Day/Year

Training Certificate Identification Number:
Construction Industry Requirement of §745.225(c)(2)(iii):
Check one of the following:
Experience

or

Education

or

Training

Check the supporting documentation attached for the box checked above (submit documentation with application):
Experience
Education
Training
Resume

Diploma

Letter of Reference

Transcript

Certificate

Documentation of Work
Experience
E. Lead-Based Paint Activity or Renovation Violations

Does training Program have any past, present, or pending lead based paint activity, or renovation
violations of EPA, state, U.S. territory, or Indian tribal land(s) regulations? If yes, please attach a
written explanation.

Yes

No

F. Certification of Course Training Material
I certify that I am using th e course training materials as marked in the boxes below for each of the course s that I a m
seeking accreditation as required by §745.225(b)(1)(iii). My signature in Section I applies to this Section F.
Risk
Inspector Supervisor Assessor

Project Abatement
Dust
Designer
Worker Renovator Sampling

EPA Recommended Training Materials
Authorized State course/program
Other LBP Training
G. Re-accreditation Applicants Only
Use the following space to describe any changes to the training facility equipment or course materials since the
training program’s last application was approved. Attach additional sheets of paper as necessary.

H. Additional Information
Use the following space for any additional information or comments that you feel are relevant and want EPA to
consider with your application. Attach additional sheets of paper as necessary.

EPA Form 8500-25 (Rev 9/11)

Form Approved OMB No.2070-0155 Expires 12/31/15

I. Certification Statement

Privacy Act Statement: This statement is provided pursuant to the Privacy Act of 1974, 5 U.S.C. §552a. The authority for collecting this
information is 40 C.F.R. Part 745, and 15 U.S.C. §§2682 and 2684. The information collected on this form will be used to establish the
applicant’s eligibility to receive accreditation to conduct training in the field of lead-based paint activities in target housing and child-occupied
facilities. Disclosure of this information is voluntary; however, the failure to provide this information may delay or prevent an applicant’s
accreditation. This information may be disclosed in appropriate and limited circumstances to: EPA employees, contractors, grantees or others
when performing duties that are compatible with the purpose for which this information is collected and when this information is necessary to
complete the task; a member of Congress in response to a request made with your consent and on your behalf; to appropriate law enforcement
agencies responsible for investigating, enforcing, prosecuting or implementing specific statutes, codes or regulations and this information is
relevant to that responsibility; an appropriate adjudicative body when such disclosure is compatible with the purpose for which this information is
collected and the EPA or the United States has an interest in the proceeding; and the Department of the Treasury, the General Services
Administration, the General Accounting Office and other Federal, State, and Local Agencies for authorized activities related to this information.

I certify that the training program described in Parts A through H of this application, including any attachments, meets the
requirements established in paragraph (c) and/or (e) of 40 CFR § 745.225. I hereby attest and affirm that the information included
on this application, including any attachments, is true and accurate to the best of my belief and knowledge. I acknowledge that any
accreditation issued pursuant to this application, including any attachments, will be subject to revocation if issuance was based on
incorrect or inadequate information that materially affected the decision to issue the accreditation. I also attest and affirm that I will
maintain my accreditation(s) according to 40 CFR § 745.225 and conduct lead-based paint training only in those disciplines and
geographical areas in which I have received accreditation.
A false statement on this form may lead to prosecution under 18 U.S.C. 1001 or to imposition of applicable criminal and civil
penalties and/or administrative remedies.\

____________________________________________
Training Manager’s Signature

__________________________/_____/_______
Date Signed

(Please print this form then sign legibly within the boundaries of the box above.)

Before you mail your application and accreditation fee, make sure that you have:

Filled out all applicable sections of the application

Signed and dated the application

Made a copy of your application for your files

Enclosed education, experience, and other documentation for the

Training Program Manager and Principal Course Instructor

Enclosed a description of facilities and equipment

Enclosed the course test blueprint

Enclosed a description of activities and procedures for hands-on skills

assessment

Enclosed quality control plan(s)

Enclosed course manual(s) and course agenda(s)

Enclosed the appropriate accreditation fee(s) (check or money order)

Printed “Lead Program User Fees” on the check or money order

For more information, review the attached application instructions.

Please print out this form, sign it above, then mail original completed application,
supporting materials, and the certification to:
U.S. EPA
Lead User Fees
P.O. Box 979072
St. Louis, MO 63197-9000

EPA Form 8500-25 (Rev 9/11)

INSTRUCTIONS FOR TRAINING PROGRAMS APPLYING FOR ACCREDITATION OF LEADBASED PAINT ACTIVITIES COURSES

You may apply to the U.S. Environmental Protection Agency (EPA) for accreditation or reaccreditation of a lead-based paint initial course(s) and/or refresher course(s) in either Lead
Abatement or Renovation, Repair and Painting (RRP).
Under lead abatement, EPA offers accreditation for training providers in the following
disciplines: Inspector, Supervisor, Risk Assessor, Project Designer, or Abatement Worker.
Under lead RRP, EPA offers national accreditation to training providers in the following two
disciplines: Renovator and Dust Sampling Technician.
EPA offers accreditation in states, U.S. territories, and all Indian tribal land(s) where EPA
directly implements the lead-based paint accreditation program. If EPA does not administer the
accreditation program in an area you wish to conduct training, you must apply directly to that
state, territory, or Indian tribe for accreditation.
These instructions supplement OMB approved form No. 2070-0155, Accreditation Application
for Training Providers.
Please note that you must use a separate application form for each application type (i.e., initial
accreditation, re-accreditation, amending accreditation, or replacement of a certificate).
For example, if you are applying for initial accreditation for lead RRP as a renovator and dust
sampling technician, and re-accreditation in two lead abatement disciplines you must submit two
separate application forms for the initial accreditation and re-accreditation requests.
How to Apply for Initial Accreditation
To apply for accreditation of a training program[s], please provide the following:
1) Complete, sign and date the Accreditation Application for Training Providers (OMB form
No. 2070-0155).
2) Calculate the appropriate fee using the fees schedule provided with these instructions.
3) Provide education, experience, and other documents for the Training Program Manager
and Principal Course Instructor.
4) Enclose the following materials with your application for each course for which you apply
(see detailed discussion of each item later in this document):
a. Description of training facilities and hands-on training equipment;
b. Course test blueprint;
c. Description of activities and procedures for conducting the hands-on skills
assessment; and
d. Quality control plan(s), described in 40 CFR § 745.225(c)(9).

5) Indicate whose course materials you will use:

a. EPA model training materials. Enclose a copy of the first five pages of the
instructor and student manuals that are being used for each course for which
you’ve applied.
b. EPA-authorized state, Indian tribe approved or your own. For all course
materials that are not EPA model training enclose a complete copy of the student
and instructor manuals, or other materials to be used, for each course for which
you’ve applied. Additionally, provide a copy of the agenda for each course.

Note: When applying for accreditation of a course in a language other than English,
include a signed statement from a qualified, independent translator that the course
was compared to the English language version and found to be accurate.
6) Print “Lead Program Users Fees” on the check or money order for the fee[s] and mail it
with your application to the following address:
U.S. EPA

Lead User Fees

P.O. Box 979072

St. Louis, MO 63197-9000

Training Facilities, Hands-on Training Equipment, Class Size and Student Instructor
Ratio
Provide an inventory of all training materials that will be used to conduct hands-on activities for
each course for which you are applying, or a note indicating that the materials will be used for
more than one course.
Provide a detailed description of each facility to be used for the lecture, course test, hands-on
training, and assessment activities including a floor diagram and room dimensions.
Class size should be limited to 25, with a maximum of one instructor for every 6 students during
the hands-on exercises. Should you plan on class sizes exceeding 25, or higher
student/instructor ratio, then provide an explanation as to how you plan to adequately observe
and direct hands-on activities. You need to conduct your classes using the class size and
hands-on ratios that are approved with your application. If you want to change them you need
to contact the regional office that approved your application.
If you plan to provide training at non-permanent facilities (like a hotel, or any facility that you do
not own or maintain) then, in addition to the above, submit a description of the criteria you will
use when selecting a training site.
Training Manager and Principal Instructor Qualifications
In Sections C and D of the application you must indicate that the training program manager and
principal instructor(s) meet certain education, training and work experience requirements. You
must submit the supporting documentation regarding the qualifications, such as resumes or
transcripts, with the application.
Course Test Blueprint
Provide a copy of the course test blueprint for each course for which you are applying. The
course test blueprint is a written document identifying the proportion of course test questions
devoted to each major topic in the course curriculum. You should not submit a copy of the
course test.
For an initial course, the course test blueprint should use the course topics established in
745.225(d) to identify the proportion of course test questions which should be devoted to each
topic.

For a refresher course, the course test blueprint should use the course topics established in
745.225(e)(1) to identify the proportion of course test questions which should be devoted to
each topic.
Description of Activities and Procedures for Conducting the Hands-on Skills Assessment
Include a description of the activities and procedures that will be used for conducting the
assessment of hands-on skills for each course for which you are applying. This should include:
1) the list of hands-on topics covered in the course, 2) the activities performed for each handson topic, and 3) the method to determine the trainee’s ability to perform each of the hands-on
activities.
Quality Control Plan
Include a copy of the quality control plan. The plan should contain at least the following
elements:
1. Procedures for periodic revision of training materials and the course test to reflect
innovations in the field and regulatory changes made by EPA.
2. Procedures for the training manager's annual review of principal instructor competency.
In situations where the training manager and principal instructor are the same person an
objective review of the principle instructor’s performance is not possible. In such a case,
alternative evaluation methods should be discussed (i.e., student evaluations &
feedback, peer review, etc.).
3. For Renovator and Dust Sampling Technician disciplines, an acknowledgement that the
trainer understands and will comply with the following items (these items are described
in detail at www.epa.gov/lead/trainerinstructions.htm):

 Notification requirements and digital photograph submission instructions
 Recordkeeping requirements
 Course completion certificate requirements and unique identification number protocol
Training via Video Conference and/or Video Recording.
If you plan to provide training using a video conference and/or video recording of lecture
materials, you should include information on how you plan to conduct the training in the Quality
Control Plan. The Quality Control Plan should explain how the course will be delivered and how
the video conference technology and/or video recordings will be used in the delivery. The list
below contains examples of the information to be included in the Quality Control Plan:











The course(s) that will use video conferencing
A list of equipment that will be used for each skill set
Description of how the instructors and students will interact during the training
The location of the instructor during the training
The number of students expected at each site
Materials that will be distributed
Description of how the course test and hands-on skills assessment will be conducted
Description of how student photos will be taken
Site selection criteria for non-permanent training sites
Any other pertinent information

Note that the hands-on portion of the training must be done using the proper equipment for each
skill set. The hands-on portion and the course test should be given with a principal instructor or
guest instructor physically present. Also, the principal instructor is primarily responsible for
teaching the course materials and must be present to provide instruction (or oversight of
portions of the course taught by guest instructors) for the course for which he has been
designated the principal instructor. Therefore, the principal instructors only involvement in the
course can’t be a video recording.
If you have already received accreditation to perform classroom training and want to conduct
training by video conference and/or video recording, you should submit an amended training
provider application to EPA indicating such and include an updated quality control plan. You
should complete sections A (General Information), B (Applicant Information), H (Additional
Information) and I (Certification Statement) of the training provider application. Indicate in
section H that you are amending your accreditation to include delivery by video conferencing.
You do not need to submit a fee with your amendment.
Training Via Electronic-Learning Format
If you plan to offer training in an electronic-learning (E-learning) format, select “Accreditation
application” in section “A”. Write “E-learning” in the text field labeled “Courses in electroniclearning format, or a language other than English” and select the appropriate course(s) in the
boxes provided. You may also apply to offer E-learning courses in a language other than
English by entering this information in the same test box (e.g. E-learning in Spanish).
To offer E-learning you must read the implementation guidelines document entitled “Model
Renovation, Repair and Painting (RRP) Rule E-learning Course Component Implementation
Requirements.” These guidelines are available at
http://www.epa.gov/lead/pubs/toolkits.htm#trainer and describe the implementation and
Learning Management System requirements for providing the E-learning component content.
In your Quality Control Plan, you must describe how you will meet each requirement set forth in
this document. If you do not fully address all the requirements your application will be
considered incomplete and you will be required to provide additional information potentially
delaying the approval process. You must include a copy of the E-learning training course you
will be offering in the form of a CD or by including a link to a webpage and user ID and
password for EPA access in the Quality Control Plan. This applies whether you are using the
model E-learning course or an alternative.
If you are applying to offer only E-learning modules with no in-class presentation of the lecture
material, you must indicate whether you will use permanent or non-permanent training facilities
for the required hands-on training activities, the in-person hands-on skills assessment and the
in-person final exam.
How to Apply for Re-accreditation
All training course accreditations expire every (4) years. To ensure that your training program
will be re-accredited before your current accreditation expires, you must submit your reaccreditation application no later than 180 days before the expiration date.
For re-accreditation complete only sections A (General Information), B (Applicant Information),
C (Qualifications of Training Program Manager), D (Qualifications of Principal Course
Instructor), E (Lead-Based Paint Activity or Renovation Violations) and I (Certification
Statement) of the application and follow the mailing instructions described in the “initial

accreditation” section of these instructions. You must also submit the following information with
your application:
• Qualifications of the training program manager
• Qualifications of the principal instructor(s)
• A description of any changes to the training facility, equipment or course materials since
your last application was approved that adversely affects the students' ability to learn.
Amended Application

If information included in a trainers most recent application to EPA changes, the training
program has 90 days to amend their accreditation. If an amendment is not submitted within 90
days the training program may not provide training until their accreditation is amended.
To amend an accreditation, simply complete the form “Accreditation Application for Training
Providers.” Be sure to check the box indicating the application is an amendment, include the
information that has changed, and the form must be signed by the training manager. When
adding a permanent training location you need to submit a photo(s) of the lecture area, a
photo(s) of each hands-on area, and a diagram of the training facilities including dimensions.
If the amendment includes a new training program manager, any new principal instructor(s), or
any new permanent training location(s), the training provider is not permitted to provide training
under the new training manager or offer courses taught by any new principal instructor(s) or at
the new training location(s) until EPA either approves the amendment or 30 days have elapsed,
whichever occurs earlier. Except:
o If the amendment includes a new training program manager or principal
instructor that was already approved under another EPA training program
accreditation, the training provider may provide training under the new training
manager or offer courses taught by the new principal instructor on an interim
basis as soon as the provider submits the amendment to EPA. The training
provider may continue to provide training under the new training manager or offer
courses taught by the new principal instructor if EPA approves the amendment or
if EPA does not disapprove the amendment within 30 days.
o If the amendment includes a new permanent training location, the training
provider may begin to provide training at the new permanent training location on
an interim basis as soon as the provider submits the amendment to EPA. The
training provider may continue to provide training at the new permanent training
location if EPA approves the amendment or if EPA does not disapprove the
amendment within 30 days.
Amended applications must be sent to the following address:
U.S. EPA
P.O. Box 14417
Washington DC 20044-4417
Replacement of a Certificate
To replace a certificate, complete only sections A (General Information), B (Applicant
Information), and I (Certification Statement) of the application and follow the mailing instructions
described in the “initial accreditation” section of these instructions.

Incomplete Application
If any components of your application are missing, your application will become inactive for a
period not to exceed 30 days until the application is made complete. If you do not complete your
application, EPA will return the application package. You may apply again with a complete
package. Please call 1-800-424-LEAD to see if your application is complete.
Fees
The fee[s] for applying for accreditation, re-accreditation, and other requests are listed in the
following schedule. It is important that you:
1) Calculate the fee based on the number of discipline[s] and EPA-run jurisdiction[s] in
which you plan to operate.
a. If applying for lead abatement discipline accreditation, submit a $35 dollar fee
for Indian tribal land[s] located in each EPA Region, (e.g., if applying for
accreditation in multiple Indian Tribal lands located in Region 5 and Region 7 you
must pay a $35 fee per Region, or a total of $70).
b. If applying for lead RRP discipline accreditation, there is NO jurisdictional fee –
the accreditation or re-accreditation fee is a National Accreditation for all
jurisdictions where EPA administers the program.
2) Write your total fee amount in Section A of the application, even if you attach additional
sheets of paper listing additional EPA-run jurisdictions for lead abatement disciplines.
3) Make the check or money order payable to U.S. Environmental Protection Agency.
Other methods of payment include wire transfer, electronic funds transfer, and, for
government payers, online payment agency collection (OPAC).

Fee Schedule
Course
Lead Abatement Initial Course
Inspector
Supervisor
Risk Assessor
Project Designer
Abatement Worker (English)
Abatement Worker (non-English)
Lead Abatement Refresher Course
Inspector
Supervisor
Risk Assessor
Project Designer
Abatement Worker (English)
Abatement Worker (non-English)
Lead RRP Initial Course
Renovator
Renovator Course in a language other
than English
Renovator Course in an Electronic
Format
Renovator Course in an Electronic
Format in a Language Other Than
English
Dust Sampling Technician
Dust Sampling Technician Course in a
language other than English
Dust Sampling Technician Course in an
Electronic Format
Lead RRP Refresher Course
Renovator
Renovator Course in a language other
than English
Renovator Course in an Electronic
Format
Dust Sampling Technician
Dust Sampling Technician Course in a
language other than English
Dust Sampling Technician Course in an
Electronic Format
Multi-Jurisdictional Lead Abatement
Accreditation Fee*
Replacement Certificate

Accreditation Fee

Re-accreditation Fee

$870
$870
$870
$870
$870
$870

$620
$620
$620
$620
$620
$620

$690
$690
$690
$690
$690
$690

$580
$580
$580
$580
$580
$580

$560
$560

$340
$340

$560

$340

$560

$340

$560
$560

$340
$340

$560

$340

$400
$400

$310
$310

$400

$310

$400
$400

$310
$310

$400

$310

$35 per discipline for each additional EPArun jurisdiction**
$15

* Multi-jurisdictional accreditation applies only to an applicant applying in more than one EPA-run jurisdiction.
** An EPA-run jurisdiction includes an EPA-run state, a U.S. territory, or all Indian tribal land(s) in any one EPA Region
(For current list of EPA-run jurisdictions, see www.epa.gov/lead or call 1800-424-LEAD.)

Fee Examples
1)

If training program is applying for refresher Worker course accreditation in two states:
Refresher Worker accreditation fee
One additional state fee*
Total Amount Due:

2)

If training program is applying for national accreditation (RRP) for both Renovator and Dust
Sampling Technician
Renovator initial accreditation fee
Dust Sampling Technician initial accreditation fee
Total Amount Due:

3)

$ 560
$ 560
$1120

If training provider is applying for re-accreditation for Abatement Inspector, Worker, and Project
Designer refresher courses:
Refresher Inspector re-accreditation fee
Refresher Worker re-accreditation fee
Refresher Project Designer re-accreditation fee
Total Amount Due:

4)

$690
$ 35
$725

$ 580
$ 580
$ 580
$1740

If training program is applying for accreditation to offer the Initial Renovator course in multiple
formats
Initial Renovator in-class presentation
Initial Renovator in-class presentation in Spanish
Initial Renovator course offered with E-learning presentation of
lecture materials
Total Amount Due:

$ 560
$ 560
$ 560
$1680

Application Process for Training Program Accreditation
EPA processes applications on a first-come first-served basis. The flowchart below depicts the
application process for training program accreditation. EPA has up to 180 days after receiving a
complete request for accreditation to approve or disapprove the application.

Paperwork Reduction Act Notice: The annual public burden for this collection of information is estimated to be 27.6
hours per accreditation response, and 4.8 hours per re-accreditation response, including the time needed for reading
the instructions and completing the necessary information contained in this form. Send comments regarding the
burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden to:
Director, Collection Strategies Division, Office of Environmental Information (OEI), U.S. Environmental Protection
Agency (Mail Code 2822), 1200 Pennsylvania Avenue, N.W., Washington, D.C. 20460. Include OMB No. 2070-0155
in any correspondence. Do not send the completed form or requested information to this address. The actual
information or form should be submitted in accordance with the instructions accompanying the form, or as specified in
the corresponding regulations.