CDX Registration

TSCA Section 5(a)(2) Significant New Use Rules for Existing Chemicals

TDD 9.21 OPPT MTS Section 5 Notices and Supports Secondary Authorized Official User Guide v1.0

CDX Registration

OMB: 2070-0038

⚠️ Notice: This form may be outdated. More recent filings and information on OMB 2070-0038 can be found here:

Document [pdf]

Download: pdf | pdf

Section 5 Notices and Supports
User Guide - Secondary Authorized
Official
Environmental Protection Agency
Office of Pollution Prevention and Toxics
Manage Toxic Substances

Delivery Order # GS00Q09BGD0022
Task Order # EP-G11H-00154
Project # TDD 9.21
Version 1.0
December 17, 2014

Table of Contents
Table of Contents......................................................................................................................... i
List of Exhibits ............................................................................................................................ iv
1

Introduction ........................................................................................................................1

System Requirements ........................................................................................................2
2.1

Supported Browsers .....................................................................................................2

2.2

Screen Resolution ........................................................................................................2

Secondary Authorized Official Functions ............................................................................3
3.1

Log into Section 5 Notices and Supports Application ....................................................4

3.2

Home Screen Navigation ..............................................................................................5

3.3

User Management ........................................................................................................8

3.4

Section 5 Notices and Supports Forms .........................................................................9

3.5

Create Passphrase .....................................................................................................12

3.6

Enter Passphrase .......................................................................................................14

3.7

Navigation Tree ..........................................................................................................15

3.8

Action Bar ...................................................................................................................22

3.9

Attach Documents ......................................................................................................24

3.10

Search Substance Registry Services ..........................................................................28

3.11

Add Facility .................................................................................................................30

PMN Secondary User .......................................................................................................33
4.1

Create Joint Submission .............................................................................................33

4.1.1

General Form Information (Joint PMN) .................................................................33

4.1.2

Agent Information .................................................................................................36

4.1.3

Technical Contact Information ..............................................................................41

4.1.4

Chemical Identification ..........................................................................................44

4.1.5

Class 1 or 2 Chemical Substances ....................................................................... 46

4.1.6

Class 2 Substances ..............................................................................................53

4.1.7

Additional Chemical Information ...........................................................................56

4.1.8

Polymer Identification Information .........................................................................61

4.1.9

Monomers and Other Reactants ...........................................................................66

4.1.10

Production Volume and Hazard/Safety Information ...............................................70

4.1.11

Use Information ....................................................................................................73

4.1.12

Physical and Chemical Properties Worksheet .......................................................78

4.1.13

Physical and Chemical Properties Worksheet – Continued (Optional) .................. 86

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
i

4.1.14

Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents ...........................................................................................................88

4.1.15

Site Information.....................................................................................................92

4.1.16

Sites Controlled By Others ....................................................................................94

4.1.17

Submitter Operation Information ...........................................................................96

4.1.18

Occupational Exposures .....................................................................................101

4.1.19

Environmental Releases .....................................................................................104

4.1.20

Industrial Sites Controlled By Others .................................................................. 108

4.1.21

Exposures/Releases ...........................................................................................111

4.1.22

Byproduct Information .........................................................................................116

4.1.23

Optional Pollution Prevention .............................................................................. 118

4.1.24

Additional Attachments .......................................................................................120

4.1.25

Attachment Summary .........................................................................................122

4.1.26

Optional Cover Letter ..........................................................................................124

4.1.27

Upload XML ........................................................................................................126

Biotechnology Secondary User ......................................................................................129
5.1

Joint and Letter of Support Process .......................................................................... 129

5.1.1

General Form Information ...................................................................................129

5.1.2

Technical Contact Information ............................................................................ 132

5.1.3

Optional Cover Letter ..........................................................................................135

Bona Fide Form Secondary User ...................................................................................137
6.1

Edit Bona Fide Form .................................................................................................137

6.1.1

General Document Information ........................................................................... 137

6.1.2

Primary Contact Information ...............................................................................138

6.1.3

Technical Contact Information ............................................................................ 141

6.1.4

Chemical Identification Information ..................................................................... 142

6.1.5

Class 1 or 2/Biotechnology Chemical Substance ................................................ 144

6.1.6

Class 2/Biotechnology Substances ..................................................................... 148

6.1.7

Polymer Identification Information ....................................................................... 150

6.1.8

Monomers and Other Reactants ......................................................................... 153

6.1.9

Use Information ..................................................................................................156

6.1.10

Document Management......................................................................................157

6.1.11

Optional Cover Letter ..........................................................................................158

Preview ..........................................................................................................................160

Validate ..........................................................................................................................163

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
ii

Submit to EPA via CDX ..................................................................................................165
9.1

Submitting Official Information ..................................................................................165

9.2

Submitting On Behalf Of ...........................................................................................167

9.3

Submission Process: Validation ................................................................................169

9.4

Cross-Media Electronic Reporting Regulation (CROMERR) Certification ................. 171

9.5

Cross-Media Electronic Reporting Regulation (CROMERR) Login ........................... 172

9.6

Cross-Media Electronic Reporting Regulation (CROMERR) Security Question ........ 172

9.7

Submit to CDX ..........................................................................................................173

9.8

Cross-Media Electronic Reporting Regulation (CROMERR) Submission .................. 174

Download Copy of Record ..............................................................................................176

Create an Amendment ...................................................................................................178

Resources ......................................................................................................................180

Appendix A .............................................................................................................................183

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
iii

List of Exhibits
Exhibit 3-1 Section 5 Notices and Supports User Roles Matrix ...................................................4
Exhibit 3-2 Chemical Information Submission System Screen ....................................................5
Exhibit 3-3: Section 5 Notices and Supports Home Screen .........................................................7
Exhibit 3-4: User Management Screen ........................................................................................9
Exhibit 3-5: Section 5 Notices and Supports Forms Screen ......................................................12
Exhibit 3-6: Create Passphrase Screen.....................................................................................14
Exhibit 3-7: Enter Passphrase Screen .......................................................................................15
Exhibit 3-8: Navigation Prompt Pop-Up Window .......................................................................16
Exhibit 3-9: Premanufacture Notice Navigation Tree (Scroll 1) ..................................................18
Exhibit 3-10: Premanufacture Notice Navigation Tree (Scroll 2) ................................................19
Exhibit 3-11: Premanufacture Notice Navigation Tree (Scroll 3) ................................................20
Exhibit 3-12: Biotechnology Navigation Tree .............................................................................21
Exhibit 3-13: Bona Fide Navigation Tree (Class 1 or 2 Chemical Substances) .......................... 21
Exhibit 3-14: Bona Fide Navigation Tree (Polymer) ...................................................................22
Exhibit 3-15: Action Bar – Validate ............................................................................................22
Exhibit 3-16: Action Bar – Save .................................................................................................23
Exhibit 3-17: Action Bar – Preview ............................................................................................23
Exhibit 3-18: Action Bar – Submit ..............................................................................................24
Exhibit 3-19: Action Bar – Help Links ........................................................................................24
Exhibit 3-20: Attach Documents Pop-Up Window......................................................................27
Exhibit 3-21: Search Substance Registry Services Pop-Up Window ......................................... 29
Exhibit 3-22: Chemical Not Found In Substance Registry Services Pop-Up Window ................ 30
Exhibit 3-23: Add Facility Pop-Up Window ................................................................................32
Exhibit 4-1: General Form Information Screen (Joint Submission) ............................................ 36
Exhibit 4-2: Agent Information Screen (Joint Submission) .........................................................38
Exhibit 4-3: Add Agent Pop-Up Window ....................................................................................40
Exhibit 4-4: Technical Contact Information Screen (Joint Submission) ...................................... 42
Exhibit 4-5: Add Technical Contact Pop-Up Window .................................................................44
Exhibit 4-6: Chemical Identification Screen (Joint Submission) .................................................46
Exhibit 4-7: Class 1 or 2 Chemical Substances Screen (Joint Submission) ............................... 52
Exhibit 4-8: Class 2 Substances Screen (Joint Submission) (Scroll 1) ...................................... 55
Exhibit 4-9: Class 2 Substances Screen (Joint Submission) (Scroll 2) ...................................... 56
Exhibit 4-10: Additional Chemical Information Screen (Joint Submission) (Scroll 1) .................. 60
Exhibit 4-11: Additional Chemical Information Screen (Joint Submission) (Scroll 2) .................. 61
Exhibit 4-12: Monomers and Other Reactants Screen (Joint Submission) (Scroll 1) ................. 69
Exhibit 4-13: Monomers and Other Reactants Screen (Joint Submission) (Scroll 2) ................. 70
Exhibit 4-14: Production Volume and Hazard/Safety Information Screen (Joint Submission) .... 73
OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
iv

Exhibit 4-15: Use Information Screen (Joint Submission) (Scroll 1) ........................................... 77
Exhibit 4-16: Use Information Screen (Joint Submission) (Scroll 2) ........................................... 78
Exhibit 4-17: Physical and Chemical Properties Worksheet Screen (Joint Submission) (Scroll
1) ..............................................................................................................................................85
Exhibit 4-18: Physical and Chemical Properties Worksheet Screen (Joint Submission) (Scroll
2) ..............................................................................................................................................86
Exhibit 4-19: Physical and Chemical Properties Worksheet – Continued (Optional) Screen (Joint
Submission) ..............................................................................................................................88
Exhibit 4-20: Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents Pop-Up Window (Joint Submission) (Scroll 1) ........................................................90
Exhibit 4-21: Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents Pop-Up Window (Joint Submission) (Scroll 2) ........................................................91
Exhibit 4-22: Site Information Screen (Joint Submission) ..........................................................93
Exhibit 4-23: Sites Controlled By Others Screen (Joint Submission) ......................................... 95
Exhibit 4-24: Submitter Operation Information Screen (Joint Submission) (Scroll 1) ................. 99
Exhibit 4-25: Submitter Operation Information Screen (Joint Submission) (Scroll 2) ............... 100
Exhibit 4-26: Occupational Exposures Screen (Joint Submission)........................................... 103
Exhibit 4-27: Environmental Releases Screen (Joint Submission)........................................... 107
Exhibit 4-28: Industrial Sites Controlled By Others Screen (Joint Submission) ........................ 110
Exhibit 4-29: Exposures/Releases Screen (Joint Submission) (Scroll 1) ................................. 113
Exhibit 4-30: Exposures/Releases Screen (Joint Submission) (Scroll 2) ................................. 115
Exhibit 4-31: Byproduct Information Screen (Joint Submission) .............................................. 117
Exhibit 4-32: Optional Pollution Prevention Screen (Joint Submission) ................................... 120
Exhibit 4-33: Additional Attachments Screen (Joint Submission) ............................................. 122
Exhibit 4-34: Attachment Summary Screen (Joint Submission) ............................................... 124
Exhibit 4-35: Optional Cover Letter Screen (Joint Submission) ............................................... 126
Exhibit 4-36: Upload XML Screen ...........................................................................................128
Exhibit 5-1 General Form Information Screen (Joint Biotechnology) ....................................... 131
Exhibit 5-2: Technical Contact Information Screen (Joint Biotechnology) ................................ 133
Exhibit 5-3: Add Technical Contact Pop-Up Window ............................................................... 135
Exhibit 5-4: Optional Cover Letter Screen ...............................................................................136
Exhibit 6-1: General Document Information Screen (Letter of Support) ................................... 138
Exhibit 6-2: Primary Contact Information Screen ..................................................................... 140
Exhibit 6-3: Technical Contact Information Screen .................................................................. 142
Exhibit 6-4: Chemical Identification Information Screen........................................................... 144
Exhibit 6-5: Polymer Identification Information Screen ............................................................ 153
Exhibit 6-6: Monomers and Other Reactants Screen .............................................................. 155
Exhibit 6-7: Use Information Screen ........................................................................................156
Exhibit 6-8: Document Management Screen ........................................................................... 158
Exhibit 6-9: Optional Cover Letter Screen ...............................................................................159
OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
v

Exhibit 7-1: Preview Biotechnology Form Screen .................................................................... 161
Exhibit 7-2: Preview Biotechnology Form PDF ........................................................................ 162
Exhibit 8-1: Section 5 Notices and Supports Validation Pop-Up Window ................................ 164
Exhibit 9-1: Submitting Official Information Screen.................................................................. 167
Exhibit 9-2: Submitting On Behalf Of Screen........................................................................... 169
Exhibit 9-3: Submission Process: Validation Screen ............................................................... 170
Exhibit 9-4: Submission Process: PDF Generation Screen ..................................................... 170
Exhibit 9-5: Cross-Media Electronic Reporting Regulation (CROMERR) Certification Screen . 171
Exhibit 9-6: Cross-Media Electronic Reporting Regulation (CROMERR) Login Screen ........... 172
Exhibit 9-7: Cross-Media Electronic Reporting Regulation (CROMERR) Security Question
Screen ....................................................................................................................................173
Exhibit 9-8: Submit to CDX Screen .........................................................................................174
Exhibit 9-9: Cross-Media Electronic Reporting Regulation (CROMERR) Submission Screen . 175
Exhibit 10-1: Download Copy of Record Screen...................................................................... 176
Exhibit 10-2: Download Prompt Screen ...................................................................................177
Exhibit 11-1: Section 5 Notices and Supports Form ................................................................ 178
Exhibit 11-2: Unlock Prompt Message ....................................................................................179
Exhibit 12-1: Resources Screen (Scroll 1) ...............................................................................181
Exhibit 12-2: Resources Screen (Scroll 2) ...............................................................................182

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
vi

Revision Log
Date
09/20/13

12/17/14

Version
No.
0.01

1.0

Description
Initial Draft of User Guide

Final Section 5 Notices and Supports
Secondary AO User Guide

Author

Reviewer

C. Yeh

S. Young

J. DeRosa

J. Ritchey

C. Yeh

J. Bronick

Review
Date
09/20/13

12/17/14

Incorporated OPPT comments given
on 11/07/2013
Incorporated Release 1.00
enhancements, other OPPT
comments

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
vii

Introduction

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT)
Section 5 Notices and Supports forms application submission process. This document is the user
guide for the Secondary Authorized Official (AO) user of the Section 5 Notices and Supports
application.
The Section 5 Notices and Supports application is the electronic, web-based tool provided by the
Environmental Protection Agency (EPA) for the submission of Section 5 Notices and Supports
data. As a Secondary AO, you can create or modify a Joint Submission/Letter of Support for a
Section 5 Notices and Supports form as well as submit it to the Central Data Exchange (CDX).
You can also delete Section 5 Notices and Supports forms, submit amendments to Joint forms,
and download the Copy of Record (CoR).
For questions concerning the Toxic Substances Control Act (TSCA) Section 5 Notices and
Supports software requirements, please contact the CDX Help Desk at helpdesk@epacdx.net or
call 1-888-890-1995 between the hours of 8 am – 6 pm Eastern Standard Time (EST). For
questions concerning the TSCA Section 5 Notices and Supports reporting requirements, please
contact the TSCA Hotline at TSCA-Hotline@epamail.epa.gov or call 202-554-1404 between the
hours of 8:30 am – 5:00 pm EST.

OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
1

System Requirements

To use the Section 5 Notices and Supports application to submit a Section 5 Notices and
Supports form the following are required:
• An e-mail account
• JavaScript enabled web browser
• Internet access
• Adobe Acrobat Reader 5.0 or higher
• CDX username and password
2.1

Supported Browsers

• Internet Explorer (IE) 7 or above (Internet Explorer 8 or higher is recommended; issues
found using IE 7 will be resolved on a case-by-case basis during post-production and known
issues within IE 7 are identified within the appropriate sections of this guide)
−

Go to the following link to download:
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie

• Mozilla Firefox 3.0 or above
−

Go to the following link to download:
http://www.mozilla.com/en-US/firefox/all-older.html

• Safari 4 or above
−

Go to the following link to download:
http://support.apple.com/kb/dl877

• Google Chrome
−

Go to the following link to download:
http://www.google.com/chrome

• Opera
−

2.2

Go to the following link to download:
http://www.opera.com/download
Screen Resolution

• Screen resolution should be set to 1024 x 768 or greater.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
2

Secondary Authorized Official Functions

This section describes how to:
• Access the application
• Navigate the Section 5 Notices and Supports ‘Home’ screen
• Assign Supports to complete a Letter of Support or Joint Submission
• Start, complete, and submit the Section 5 Notices and Supports Letters of Supports and Joint
Submissions for a Premanufacture Notice (PMN), Biotechnology, or Letter of Support for a
Bona Fide
• Upload an Extensible Markup Language (XML) file
• Download a Copy of Record
• Create an amendment for Joint Submissions and/or Letter of Supports
The Secondary AO has the ability to submit Joint Submissions and/or Letters of Support, and is
legally responsible for the information submitted to EPA. The Secondary AO is typically a
senior official with management responsibility for the person(s) completing the form. The
Secondary AO can create, delete, and unlock submitted Joint Submissions and or/Letters of
Support for creating amendments. The Secondary AO is responsible for restricting the Secondary
Support’s (and other authorized individuals) access to select forms by using the user
management functionality within the system. The system uses Cross-Media Electronic Reporting
Regulation (CROMERR) encryption security during the submission signing process.
The Secondary AO creates a new Joint Submission or Letter of Support and delegates to the
Secondary Support to fill out required sections of the form.
The Secondary AO is responsible for receiving the unique identification number that will be sent
after an original PMN, Biotechnology, or Bona Fide form is submitted and designated by the
Primary Submitter as a Joint Form and/or Letter of Support form. The Joint Submission or Letter
of Support will not be created until the Secondary AO creates a passphrase for a form. To link
the Joint Form to the primary form, a user will enter the unique identification number.
You can save the form at any point during the data entry process. The save functionality will
allow you to return to a form at any point in the future. You can print the form at any point;
however, the ‘Not For Submission’ watermark will be placed on the form anytime the form is
printed prior to actual submission.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
3

Exhibit 3-1 displays a table of the capabilities of user roles within the Section 5 Notices and
Supports application.
Exhibit 3-1 Section 5 Notices and Supports User Roles Matrix

3.1

Log into Section 5 Notices and Supports Application

After you create an account in CDX, click the ‘Secondary Authorized Official’ link for the
Chemical Safety and Pesticide Programs (CSPP) data flow to navigate to the ‘Chemical
Information Submission System’ screen.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
4

Exhibit 3-2 shows a screen capture of the ‘Chemical Information Submission System’ screen:
Exhibit 3-2 Chemical Information Submission System Screen

Navigation: To access the Section 5 Notices and Supports ‘Home’ screen, select ‘TSCA Section
5 Notices and Supports – ePMN’ from the submission type drop-down menu and click the ‘OK’
button.
3.2

Home Screen Navigation

You can access the Section 5 Notices and Supports ‘Home’ screen by selecting ‘TSCA Section 5
Notices and Supports – ePMN’ from the submission type drop-down menu on the ‘Chemical
Information Submission System’ screen and clicking the ‘OK’ button.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
5

The Section 5 Notices and Supports ‘Home’ screen is the first screen within the Section 5
Notices and Supports application. It provides you with links and tabs to access the ‘Section 5
Notices and Supports Forms,’ ‘User Management,’ and ‘Resources’ screens. To navigate to any
of these screens, click the corresponding screen link (highlighted in blue text), or click the screen
tab (located within the application header). The links and tabs provide the same functionality.
There is a ten (10) minute logout timer for this application; the application will automatically log
you out after ten minutes of inactivity and navigate you back to the CDX login screen.
• Forms: Click the ‘Forms’ tab or link to navigate to the ‘Section 5 Notices and Supports
Forms’ screen. You can create, modify, or delete a Section 5 Notices and Supports form
using the ‘Section 5 Notices and Supports Forms’ screen. For additional details about the
‘Section 5 Notices and Supports Forms’ screen, please refer to Section Error! Reference
source not found..
• User Management: Click the ‘User Management’ link or tab to navigate to the ‘User
Management’ screen. You can manage the access rights of Supports per form alias using the
‘User Management’ screen. For additional details about the ‘User Management’ screen,
please refer to Section Error! Reference source not found..
• Resources: Click the ‘Resources’ link or tab to navigate to the ‘Resources’ screen. You can
find the Section 5 Notices and Supports user guide, as well as useful links for guidance
documents on the ‘Resources’ screen. For additional details about the ‘Resources’ screen,
please refer to Section 12.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
6

Exhibit 3-3 shows a screen capture for the Section 5 Notices and Supports ‘Home’ screen:
Exhibit 3-3: Section 5 Notices and Supports Home Screen

Navigation: Click the ‘User Management’ link or tab to access the ‘User Management’ screen
and assign Supports.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
7

3.3

User Management

You can access the ‘User Management’ screen by clicking the ‘User Management’ link on the
Section 5 Notices and Supports ‘Home’ screen or by clicking the ‘User Management’ tab from
the application header.
On the ‘User Management’ screen, you have the ability to assign one or more Supports to have
access to modify any of the Section 5 Notices and Support forms you have created. You can also
assign different Supports to fill out the Section 5 Notices and Supports submission for each form
alias.
Form Alias: A form alias will not be available in this menu until it has been created. Select a
form alias from the drop-down menu to begin assigning Supports. Once a form alias has been
selected, the ‘Assign Users’ group box will update to display only the Supports who have
identified you as their AO during CDX registration.
Form Information: This box shows information pertaining to the form you selected from the
‘Form Alias’ drop-down menu.
• Form Alias: Displays the form alias that a form is given.
• TS Number: Displays the toxic substances (TS) number that is entered for that specific
form.
• Form Type: Displays the type of form, which may include ‘Primary PMN,’
‘Biotechnology,’ or ‘Bona Fide.’
• Form Subtype: This value will be blank for Secondary AOs since this value is disjointed
from the form information displayed.
• Last Modified: Displays the date the form was last modified.
Assign Users: This box shows all the Supports you can assign to complete a Section 5 Notices
and Supports form for the form alias selected. To move Supports from the ‘Unassigned’ group
box to the ‘Assigned’ group box, highlight the individual or multiple Support(s) and click the
‘add >>’ button.
• Unassigned: This box/field contains the registered Supports associated with the AO who
could potentially be assigned to access and edit the selected form. To move Supports from
the ‘Unassigned’ group box to the ‘Assigned’ group box, highlight an individual or multiple
Support(s) and click the ‘add >>’ button. To highlight multiple Supports hold down the
key on your keyboard while clicking each Support. To highlight multiple consecutive
Supports, hold down the key on your keyboard while clicking the first and last
Supports in the list.
• Assigned: This box/field contains the registered Supports given permission, by the AO, to
access and edit the selected form. This group box shows all the Supports that are assigned to
complete the Section 5 Notices and Supports form for a single form alias. To move Supports
from the ‘Assigned’ group box to the ‘Unassigned’ group box highlight individual or
multiple Supports and click the ‘<< remove’ button. To highlight multiple Supports hold
down the key on your keyboard and click each Support. To highlight multiple
consecutive Supports hold down the key on your keyboard and click the first and last
Supports in the list.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
8

• Add >>: Click the button to move Supports from the ‘Unassigned’ box to the ‘Assigned’
box.
• << Remove: Click the button to move Supports from the ‘Assigned’ box to the ‘Unassigned’
box.
When you have finished assigning the Supports, click the ‘Save’ button that displays after
selecting a form to save the selection.
Exhibit 3-4 shows a screen capture of the ‘User Management’ screen:
Exhibit 3-4: User Management Screen

Navigation: Click the ‘Forms’ tab located within the application header to navigate to the
‘Section 5 Notices and Supports Forms’ screen and start a new form.
3.4

Section 5 Notices and Supports Forms

You can access the ‘Section 5 Notices and Supports Forms’ screen by clicking the ‘Forms’ link
from the Section 5 Notices and Supports ‘Home’ screen, or by clicking the ‘Forms’ tab located
within the application header.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
9

Only one Section 5 Notices and Supports form is created per form alias. Each column within the
table of the ‘Section 5 Notices and Supports Forms’ screen can be sorted by clicking the
individual column headers.
Start New Form: To create a new Section 5 Notices and Supports Joint Submission/Letter of
Support, click the ‘Start New Form’ button. You will be required to enter the unique
identification number supplied by the Primary AO or Primary Agent/Consultant and create a
passphrase that will be associated with your particular form. Make sure to create a passphrase
that you will remember, as it cannot be retrieved or reset. Refer to Section 3.5 for further
instructions on creating a new passphrase.
Edit an ‘In Progress’ Form: To modify an existing Section 5 Notices and Supports form, click
the ‘Alias’ link that has a status of ‘In Progress.’ You will be required to enter the passphrase
associated with that particular form to access and edit the form. Refer to Section 0 for further
instructions on viewing and modifying a form that is ‘In Progress.’
Amend a submitted form: To edit an already submitted Section 5 Notices and Supports form
(i.e., to create an amendment), you must first unlock the particular form by clicking the ‘Lock’
icon ( ) under the ‘Action’ column. You are required to enter the passphrase associated with
that particular submission to gain access and amend the submission. All changes that are made
will be submitted as an amendment. Refer to Section 0 for further instructions on creating an
amendment.
The ‘Section 5 Notices and Supports Forms’ screen displays the following columns of
information:
• Alias: Displays the form alias provided on the ‘General Form Information,’ ‘General
Document Information,’ or ‘Contact Information’ screen. The ‘Alias’ column will display a
default alias comprised of a form type, date stamp, and time stamp in the following format:
if you accept the system-generated
‘Form Alias’ on the first screen in a Section 5 Notices and Supports form. A form alias is
helpful when a user or company has multiple forms and/or when you must differentiate
between forms. Click the form alias link to navigate to the ‘Enter Passphrase’ screen to
access a form.
• Type: Displays the form type pertaining to the reported chemical substance or mixture. This
column can contain the following values: ‘Joint PMN,’ ‘Joint Biotechnology,’ or ‘Joint Bona
Fide.’
• Subtype: This column will not populate for a Secondary Authorized Official.
• Case Number: Displays the form case number pertaining to the reported chemical substance
or mixture after EPA receives the submission. A consolidated submission will generate
sequential case numbers for each chemical identified within the form. Case numbers will not
be sequential for joint consolidated submissions. If the form has not been submitted and
received, the field remains blank.
• Status: Displays the status of the Section 5 Notices and Supports form. The values will
display as either ‘In Progress’ or ‘Submitted.’
• Modify Date: Displays the date the form was last modified.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
10

• Submission Date: Displays the date the form was submitted to EPA via CDX. This date
populates only after the form has been submitted.
• Copy of Record: Click the ‘Copy of Record’ icon ( ) to navigate to the ‘Enter Passphrase’
screen, then the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Login’ screen
to continue to the ‘Copy of Record’ screen. The ‘Copy of Record’ icon ( ) displays only
after the form has been completed. Refer to Section 10 for further instructions on
downloading the Copy of Record. If you have just submitted via CDX, the ‘Copy of Record’
icon ( ) may take 15-20 minutes to display. In addition, you must refresh the ‘Section 5
Notices and Supports Forms’ screen for the ‘Copy of Record’ icon ( ) to display.
• Action: Displays a ‘Delete’ icon ( ) for all forms with a status of ‘In Progress.’ Click the
‘Delete’ icon to delete a form. This column displays a ‘Lock’ icon ( ) for all forms that
have been submitted. Only an AO can unlock a form by clicking the ‘Lock’ icon ( ) and
unlocking the form. The form will remain unlocked and display the ‘Unlocked’ icon (
)
until the form is resubmitted by a Secondary AO.
• Export Options: Displays ‘CSV,’ ‘Excel,’ ‘XML,’ and ‘PDF’ links for you to export the
‘Section 5 Notices and Supports Forms’ screen in one of the specified formats as an Excel
spreadsheet, Comma-Separated Values (CSV), XML, or Portable Document Format (PDF).
The export options section will not display until a form is created.
• Start New Form: Click this button to start a new form and navigate to the ‘Create
Passphrase’ screen. This button is only available to Authorized Officials and
Agents/Consultants.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
11

Exhibit 3-5 shows a screen capture of the ‘Section 5 Notices and Supports Forms’ screen:
Exhibit 3-5: Section 5 Notices and Supports Forms Screen

Navigation: Click the ‘Start New Form’ button to navigate to the ‘Create Passphrase’ screen.
3.5

Create Passphrase

To start a new Section 5 Notices and Supports Joint/Letter of Support PMN, Biotechnology, or
Bona Fide form, click the ‘Start New Form’ button. The ‘Create Passphrase’ screen provides a
text field for you to enter in the unique identifier supplied by the Primary AO and create a
passphrase to associate that passphrase with the form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
12

The application uses the passphrase as an encryption key to protect the contents of the form. You
are responsible for remembering the passphrase and distributing it to the appropriate individuals.
If you forget the passphrase, you will not have access to the form and will not be able to view,
print, submit, or make changes. If you lose or forget the passphrase, you must create a new form
and passphrase. For security reasons, the system administrator does not have access to the
passphrase and will not be able to retrieve it or reset it to a new one.
Unique Identifier: Enter the unique identifier that was provided by the Primary AO or Primary
Agent/Consultant.
New Passphrase: To associate a passphrase with a form, enter a passphrase that is at least 8
characters in length. To protect your account, your passphrase should contain a combination of
letters and numbers. The passphrase you create may include spaces, but should not contain
special characters (for example, +,?, and *). You can associate the same passphrase with multiple
forms.
You will be responsible for remembering the passphrase and distributing it to only
authorized Supports for an individual form. If you forget the passphrase, you will not be
able to access the Section 5 Notices and Supports form to print, submit, or make changes.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
13

Exhibit 3-6 shows a screen capture of the ‘Create Passphrase’ screen for a Secondary Authorized
Official:
Exhibit 3-6: Create Passphrase Screen

Navigation: Enter a ‘Unique Identifier,’ create a passphrase, and click the ‘Next’ button to
navigate to the ‘General Form Information’ screen in a PMN or Biotechnology form. Click the
‘Next’ button to navigate to the ‘General Document Information’ screen in a Bona Fide form.
3.6

Enter Passphrase

To edit a form click the ‘Alias’ link for a Section 5 Notices and Supports form with a status of
‘In Progress’ on the ‘Section 5 Notices and Supports Forms’ screen. The ‘Enter Passphrase’
screen requires you to enter the passphrase that is associated with the form.
Enter Passphrase: Enter the passphrase that you originally created and associated with the
form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
14

Exhibit 3-7 shows a screen capture of the ‘Enter Passphrase’ screen:
Exhibit 3-7: Enter Passphrase Screen

Navigation: Enter the passphrase that you originally created and associated with the form and
click the ‘Next’ button to navigate to the ‘General Form Information’ screen in a PMN or
Biotechnology form.
3.7

Navigation Tree

The navigation tree is located on each screen on the left hand side. It allows you to navigate
between the various screens within the application and the different sections of the form. You
can perform the following functions using the navigation tree:
• Open and close the navigation tree: A navigation arrow that opens and closes the
navigation tree is located to the right of the navigation tree to provide more visual form
space. Click the arrow ( ) on the open navigation tree to close the navigation tree and
increase the space of the form content. Likewise, click the arrow ( ) on the closed navigation
tree to open the navigation tree.
• Collapse and Expand folders: Each section of the form falls under a collapsible folder
within the navigation tree, which allows you to save space or easily view items in the
navigation tree. When a folder is expanded, you can click the minus sign (-), the ‘Folder’
icon ( ), or the folder title link to collapse that section of the navigation tree. When a folder
is collapsed, you can click the plus sign (+), the ‘Folder’ icon ( ), or the folder title link to
expand that section of the navigation tree. When you place your cursor over a folder title
link, it will highlight in red.
• Navigate between screens: You can use the navigation tree to navigate between the various
screens within the application and the different sections of the form. A ‘Form’ icon ( )
denotes each section of a form. Click a ‘Form’ icon ( ) or a section title link to navigate
between screens. You are required to save all information entered on a particular screen

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
15

before navigating to the next screen or all entered information will be lost. A prompt will
appear after you click a link in the navigation tree indicating, ‘Are you sure you want to leave
the current page? Any unsaved changes will be lost.’ Click the ‘OK’ button to navigate to the
requested screen without saving any of the data in the previous screen. Click the ‘Cancel’
button to close the prompt and remain on the current screen.
Exhibit 3-8 shows a screen capture of the navigation prompt pop-up window:
Exhibit 3-8: Navigation Prompt Pop-Up Window

• Delete chemical folders: To delete specific chemical folders, a ‘Delete’ icon ( ) displays at
the bottom of each chemical folder within the navigation tree of a PMN form. When a
chemical folder is deleted, all information entered within the deleted chemical folder is lost
and cannot be retrieved. You can add a new chemical folder by clicking the ‘Add
Consolidated Chemical’ link, and filling in all corresponding data. This delete functionality is
not applicable to the Biotechnology or Bona Fide form.
• Copy chemical folders: To copy a specific chemical folder, click the ‘Copy’ icon ( ) that
displays at the bottom of each chemical folder within the navigation tree of a PMN form.
When a chemical folder is copied, the chemical name, Chemical Abstracts Service Registry
Number (CASRN), and attached documents are removed from the copied chemical. This
copy functionality is not applicable to the Biotechnology or Bona Fide module.
• Delete ‘Submitted Controlled Operations’ or ‘Operations Controlled By Others’: Click
the ‘Delete’ icon ( ) that displays at the bottom of each ‘Submitter Controlled Operations’
or ‘Operations Controlled by Others’ folder within the navigation tree to delete a specific
operations folder. When a ‘Submitter Controlled Operations’ or ‘Operations Controlled by
Others’ folder is deleted, all information entered within the deleted operation is lost and
cannot be retrieved. Click the ‘Add Operation’ link under the appropriate operations folder
and fill in all corresponding data to add a new ‘Submitter Controlled Operations’ or
‘Operation Controlled by Others’ folder. The delete functionality is not applicable while a
user is navigating on a screen within the ‘Operations Controlled by Others’ folder. This
delete functionality is not applicable to the Biotechnology or Bona Fide module within the
Section 5 Notices and Supports application.
• Upload XML: The system displays an ‘Upload XML’ button in the navigation tree to allow
a user to upload an XML file into a PMN form or joint PMN form, or to export an existing
PMN form into an XML file format. A user may also upload eTSCA thick client files into a
PMN form. If an XML file is uploaded into an existing form, the contents of that XML file
overwrites the contents within the PMN form. For more information about the upload XML
functionality, refer to Section 4.1.27.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
16

Please note that in IE 7, the scroll bar within the navigation tree may freeze or portions of the
scroll bar may be missing which can prevent you from using the navigation tree. If the scroll
bar freezes, click the ‘Previous’ and ‘Next’ buttons on a page to navigate, or click other links
within the navigation tree to continue within the form.
Exhibit 3-9 shows a screen capture of the Premanufacture Notice navigation tree (Scroll 1):

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
17

Exhibit 3-9: Premanufacture Notice Navigation Tree (Scroll 1)

Exhibit 3-10 shows a screen capture of the Premanufacture Notice navigation tree (Scroll 2):

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
18

Exhibit 3-10: Premanufacture Notice Navigation Tree (Scroll 2)

Exhibit 3-11 shows a screen capture of the Premanufacture Notice navigation tree (Scroll 3):
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
19

Exhibit 3-11: Premanufacture Notice Navigation Tree (Scroll 3)

Exhibit 3-12 shows a screen capture of the Biotechnology navigation tree:
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
20

Exhibit 3-12: Biotechnology Navigation Tree

Exhibit 3-13 shows a screen capture of the Bona Fide navigation tree (Class 1 or 2 chemical
substances):
Exhibit 3-13: Bona Fide Navigation Tree (Class 1 or 2 Chemical Substances)

Exhibit 3-14 shows a screen capture of the Bona Fide navigation tree (polymer):

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
21

Exhibit 3-14: Bona Fide Navigation Tree (Polymer)

3.8

Action Bar

The action bar is located at the bottom of the form section on each screen. You can perform the
following functions using the action bar:
• Validate: Click the ‘Validate’ icon ( ) at any stage of completing a Section 5 Notices and
Supports form. A ‘Section 5 Notices and Supports Validation’ pop-up window generates
when you click the ‘Validate’ icon ( ) if you disable the pop-up blocker within your
internet browser. The ‘Section 5 Notices and Supports Validation’ pop-up window displays a
report of all warning messages and validation errors. On screens that display an
expandable/collapsible field set, you must click the ‘Save’ button displayed within the
expandable/collapsible field set to save the information entered within the field set before the
‘Validate’ functionality initiates. Refer to Section 8 for more information on validating a
form.
The following exhibits, Exhibit 3-15, Exhibit 3-16: Action Bar – Save

, Exhibit 3-17, and Exhibit 3-18 show a screen captures for the action bar:
Exhibit 3-15: Action Bar – Validate

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
22

• Save: Click the ‘Save’ icon ( ) at any stage of completing a Section 5 Notices and Supports
form to save the form. To generate and access links to other pages of the form within the
navigation tree, you must click the ‘Save’ icon ( ) within the action bar. After you click the
‘Save’ icon ( ), you will receive a prompt indicating that all data entered in the form has
been saved successfully. The save function does not validate any entered data. On screens
that display an expandable/collapsible field set, you must click the ‘Save’ button displayed
within the expandable/collapsible field set to save the information entered before being able
to click the ‘Save’ icon ( ) located within the action bar or use the ‘Previous’ and ‘Next’
buttons to navigate to another page. Click the ‘Previous’ and ‘Next’ buttons on a form to save
the data entered within a form. Click the ‘X’ button in the upper right-hand corner of the
form in your browser to close the form without saving.
Exhibit 3-16: Action Bar – Save

• Preview: Click the ‘Preview’ icon ( ) at any stage of completing a Section 5 Notices and
Supports form to preview the form. After you click the ‘Preview’ icon ( ), you will be given
the option to view a regular version of the PDF (the confidential business information (CBI)
version of the form or the non-CBI version if the form contains no CBI) or a sanitized
version of the PDF. Choosing either option will generate and display a watermarked PDF of
the form in a separate tab of your internet browser. Please note that attachment header sheets
no longer generate within the PDF.
Exhibit 3-17: Action Bar – Preview

• Submit: As a Secondary AO you have the ability to click the ‘Submit’ icon ( ) to submit
Letters of Support, Joint Forms, and/or amendments to Joint Forms or after you or the
Support have completed all sections of the Section 5 Notices and Supports submission
process. After you click the ‘Submit’ icon ( ) a pop-up message displays to confirm the
submission process. The form validates during the submission process and displays any
applicable warning or error messages. Refer to Section Error! Reference source not found.
for further instructions on validation errors. You can continue the submission process only
after clearing all validation errors. Validation warnings will not prevent you from submitting
a form. Upon successful submission of a form, the application generates and sends an email
indicating the successful submission of the form to the submitter’s email address. Refer to
Section Error! Reference source not found. for more information on submitting a Section 5
Notices and Supports form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
23

Exhibit 3-18: Action Bar – Submit

Please note that in IE 7, the action bar may align to the left or the right of the screen when
viewing certain sections of the form.
• Help Links: You can click the ‘Help’ links, located at the bottom of each screen, at any stage
of completing a Section 5 Notices and Supports form.
−

If you click the ‘CDX Homepage’ link, the application takes you to the CDX Homepage.

−

If you click the ‘MyCDX Homepage’ link, the application takes you to the CDX Login
screen.

−

If you click the ‘EPA Homepage’ link, the application takes you to the EPA Homepage.

−

If you click the ‘Terms and Conditions’ link, the application takes you to the CDX Terms
and Conditions screen.
If you click the ‘Privacy Notice’ link, the application takes you to the CDX Privacy and
Security Notice screen.

−

Exhibit 3-19 shows a screen capture of the action bar ‘Help’ links:
Exhibit 3-19: Action Bar – Help Links

3.9

Attach Documents

The ‘Attach Document’ button displays on various screens within a Section 5 Notices and
Supports form, and provides functionality for you to attach supporting documents where needed.
Click the ‘Attach Document’ button displayed on a screen to access the ‘Attach Documents’
pop-up window. You can attach a file and enter a description, number of pages, and indicate CBI
status. There is no limit on the size of the file that can be attached; however, the application
prevents a user from uploading an empty document.
The system allows you to claim an uploaded document as CBI. If you claim a document as CBI,
the system requires you to upload a sanitized version of the attached document. If you wish to
change a CBI attachment to be non-CBI by un-checking the ‘CBI’ checkbox, a warning appears
to notify you that un-checking the ‘CBI’ checkbox will delete the sanitized file. If you neglect to
populate a required field and click the ‘OK’ button, an error message will display to indicate the
missing field and the application will delete the previously attached file.
After you upload a document to be attached, the ‘Attach Documents’ pop-up window will close
and the document’s information will display in a table format on the screen. Depending on the
screen, the attachment table may display the section of the page the file is associated with, the
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
24

file name and file extension of the document, a description of the document, the number of pages
in the document, and if the document was claimed CBI. The system allows you to delete
unwanted documents by clicking the ‘Delete’ icon ( ) located under the ‘Actions’ column. To
view, open, or edit previously attached documents, click the appropriate file name of the
document within the ‘File Name’ column of the document table to view previously entered
document information.
Please note that in IE 7, the ‘Cancel’ button within the ‘Attach Documents’ pop-up window
disappears and reappears when checking the ‘CBI’ checkbox.
• Type: Select the document type of the document that you upload. This drop-down menu
contains the following values: ‘Aquatic Ecotoxicity,’ ‘Chemical Structure Diagram,’ ‘Fate,’
‘gel-permeation chromatography (GPC),’ ‘Genetic Toxicity,’ ‘Health Toxicity,’ ‘IES
Report,’ ‘Safety Datasheet,’ and ‘Terrestrial Ecotoxicity’ for PMN and Biotechnology forms.
This drop-down menu contains ‘Spectrum of Substance,’ ‘Statement of Commercialization,’
‘Statement of Research and Development,’ and ‘Other’ for Bona Fide forms. This is a
required field.
• Subtype: Select the document type of the document that you upload. This drop-down menu
contains the following values, which are grouped under specific document types:
‘Partitioning (e.g., Koc, Kd, Kow, Koa, Henry’s law constant),’ ‘Hydrolysis,’ ‘Fugacity,’
‘Photolysis,’ ‘Monitoring data (e.g. air, water, soil, biota, human),’ ‘Biodegradation,’
‘Bioconcentration Factors/Bioaccumulation Factors (BCF/BAF),’ ‘Material Safety Data
Sheet/Safety Data Sheet (MSDS/SDS),’ ‘Technical Datasheet,’ ‘Eye Irritation,’ ‘Combined
Repeated-Dose/Developmental/Reproductive Toxicity,’ ‘Sensitization,’ ‘Carcinogenicity,’
‘Repeated-Dose Toxicity,’ ‘Neurotoxicity,’ ‘Acute Toxicity,’ ‘Developmental Toxicity,’
‘Pharmacokinetics/Metabolism,’ ‘Dermal Irritation,’ ‘Reproductive Toxicity,’ ‘Fish Chronic
Toxicity,’ ‘Invertebrate Acute Toxicity,’ ‘Invertebrate Chronic Toxicity,’ ‘Algae Toxicity,’
‘Fish Acute Toxicity,’ ‘Chromosomal Aberrations Assay,’ ‘Unscheduled DNA Synthesis,’
‘Genetic Mutation Assay,’ ‘Plant Toxicity,’ ‘Invertebrate Toxicity,’ ‘Avian Toxicity,’ and
‘Other.’ Document subtypes are not applicable to a Bona Fide form. This is a required field
when displayed.
• Attachment: Click the ‘Browse’ button to generate the ‘File Upload’ window to search for a
document on your hard drive. The application prevents the upload of empty documents. The
attached file can be one of the following file types: .pdf, .mol, .ppt, .pptx, .xls, .xlsx, .doc,
.docx, .rtf, .txt, .gif, .jpg, .png, .bpm, .fas, .gbk, or .embl.
• Description: Enter a description associated with the attached document. Submitters should
not include any CBI information in the document description. This is a required field.
• Number of Pages: Enter the number of pages in a document. This is a required field in a
PMN or Biotechnology form. This field is not applicable to a Bona Fide form.
• Check to claim the attachment as CBI: Check the ‘CBI’ checkbox to claim the attached
document as confidential. Un-checking the ‘CBI’ checkbox for a CBI document generates a
warning notifying you that un-checking the CBI claim will delete the sanitized file. This
checkbox is not applicable to a Bona Fide form.
• Sanitized Attachment: Click the ‘Browse’ button to generate the ‘File Upload’ window to
search for a particular file on your hard drive. The attached file can be one of the following

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
25

file types: .pdf, .ppt, .pptx, .xls, .xlsx, .doc, .docx, .rtf, .txt, .gif, .jpg, .png, .bpm, .fas, .gbk, or
.embl. For any attached document claimed as CBI, you will be required to attach a sanitized
version of the document. This field is not applicable to a Bona Fide form.
• Cancel: Click the ‘Cancel’ button to cancel the attach document process.
• OK: Click the ‘OK’ button to attach and link the document uploaded on the ‘Attach
Documents’ window to the form. If a field is missing, a warning message will display
notifying you that all attachments must be re-attached and the missing field must be
populated.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
26

Exhibit 3-20 shows a screen capture of the ‘Attach Documents’ pop-up window that displays
within the majority of forms:
Exhibit 3-20: Attach Documents Pop-Up Window

Navigation: Click the ‘Cancel’ button or ‘X’ icon in the upper right-hand corner to cancel the
document attachment process. Click the ‘OK’ button to attach the document to the form and
navigate back to the original screen from which the document attachment process was initiated.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
27

3.10

Search Substance Registry Services

The ‘Search SRS’ button displays on various screens within a Section 5 Notices and Supports
form to identify chemicals that may be stored in SRS.
Search SRS: Click the ‘Search SRS’ button to generate the ‘Search Substance Registry
Services’ pop-up window. You can search for the reported chemical(s) by either the ‘Chemical
Abstracts Service Registry Number (CASRN)’ or ‘CA Index Name or Other Synonym.’ The
application also offers the option of entering user-specified chemical information by clicking the
‘Create New Chemical’ button. Click the ‘Create New Chemical’ button to generate the
‘Chemical Not Found In Substance Registry Services’ pop-up window and enter chemical
information by filling in the ‘Chemical Name’ and ‘CASRN’ (if desired) field under the manual
entry field set.
The system allows you to enter each chemical by clicking the ‘OK’ button located at the bottom
of the ‘Search SRS’ window. Once you enter all known chemical information and click the ‘OK’
button, the chemical information saves and populates into the chemical description table. The
‘Actions’ column of the chemical table allows you to delete chemicals that have been added.
The Section 5 Notices and Supports application contains functionality to prevent a user from
adding duplicate chemicals within a multi-component submission. The application checks
chemicals in the following order:
• If both chemicals have CASRNs, they will be compared.
• If only one chemical has a CASRN, they will not be compared and are considered different.
• If neither chemicals have CASRNs, their chemical names will be compared.
An error message generates within the expandable/collapsible field set if a user attempts to add a
duplicate chemical within a multi-component submission.
Please note in IE 7, the CSPP logo might be misaligned in the ‘Search Substance Registry
Services’ window.
• CASRN: Enter the chemical abstracts service registry number of the chemical; this field
accommodates dashes. Either the ‘CASRN’ or ‘CA Index Name or Other Synonym’ field is
required when searching SRS.
• CA Index Name or Other Synonym: Enter the chemical abstract ‘(CA) Index Name or
Other Synonym’ of the chemical. This field displays the following options: ‘Matches
Exactly,’ ‘Contains,’ and ‘Begins With.’ Either the ‘CASRN’ or ‘CA Index Name or Other
Synonym’ field is required when searching SRS.
• Search SRS: Click the ‘Search SRS’ button to initiate the database search for the ‘CASRN’
or ‘CA Index Name or Other Synonym’ for the desired chemical.
• Create New Chemical: Click the ‘Create New Chemical’ button to generate the ‘Chemical
Not Found In Substance Registry Services’ pop-up window.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
28

Exhibit 3-21 shows a screen capture of the ‘Search Substance Registry Services’ pop-up
window:
Exhibit 3-21: Search Substance Registry Services Pop-Up Window

Navigation: Click the ‘Search SRS’ button on the ‘Search Substance Registry Services’ window
to initiate the database search for the ‘CASRN’ or ‘CA Index Name or Other Synonym.’ After
SRS returns results, select the radio button associated to a chemical, click the ‘OK’ button on the
‘Search SRS’ window, close the ‘Search Substance Registry Services’ window, and navigate
back to the screen from which the SRS search was initiated where the chemical information will
be populated.
If the chemical is not found in the ‘Search Substance Registry Services’ window, click the
‘Create New Chemical’ button to generate the ‘Chemical Not Found In Substance Registry
Services’ pop-up window.
• CBI: Check the ‘CBI’ checkbox to claim the entered chemical as confidential.
• Chemical Name: Enter the chemical name. This is a required field.
• CASRN: Enter the CASRN, if available.
• Maximum Percent: Enter the maximum percentage for the impurity. This field displays
only in the ‘Chemical Not Found In Substance Registry Services’ window on the ‘Additional
Chemical Information’ screen.
• Cancel: Click the ‘Cancel’ button to navigate back to the ‘Search Substance Registry
Services’ pop-up window.
• OK: Click the ‘OK’ button to enter the manually entered chemical information into the fields
on the screen from which the SRS search was initiated.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
29

Exhibit 3-22 shows a screen capture of the ‘Chemical Not Found In Substance Registry Services’
pop-up window:
Exhibit 3-22: Chemical Not Found In Substance Registry Services Pop-Up Window

Navigation: Click the ‘OK’ button to save the specified chemical information and navigate back
to the screen from which the SRS search was initiated where the chemical information will be
populated. Click the ‘Cancel’ button to navigate back to the ‘Search SRS’ pop-up window. Click
the ‘X’ located in the upper right corner to close the pop-up window and navigate back to the
screen from which the SRS search was initiated.
3.11

Add Facility

The ‘Add Facility’ button displays on the ‘Submitter Operation Information’ screen and the
‘Industrial Sites Controlled By Others’ screen within a Joint PMN form. This button also
displays on the ‘Submitter Site Identification’ screen within a Bona Fide form. The ‘Add
Facility’ button is used to generate the ‘Add Facility’ pop-up window and select the applicable
sites for which you will be reporting. The ‘Add Facility’ drop-down menu contains the sites that
all AO users within the same organization are registered for within CDX registration; additional
facilities can be added within CDX to further populate this drop-down menu.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
30

If you are not registered to any facilities within CDX registration, or you have finished
identifying all possible sites, a message displays within a pop-up window notifying you to add
additional sites within your CDX registration profile to add additional sites to a form.
Click the ‘Add Facility’ button to generate the ‘Add Facility’ pop-up window which displays the
following fields: ‘Select a site from the drop-down menu below,’ ‘CBI,’ ‘Alias,’ ‘EPA Registry
ID,’ ‘Facility Name,’ ‘Facility Address,’ ‘City,’ ‘State,’ and ‘Postal Code.’ Each individual site
may be claimed as CBI.
• Select a site from the drop-down menu below: Select a site that you will be reporting on
from the drop-down menu.
• CBI: Check the ‘CBI’ checkbox to claim the facility information as confidential.
• Alias: Enter the site alias. This is a required field if a Joint Submission or Letter of Support is
pending for the form.
• EPA Registry ID: Displays the EPA registry ID of the site selected from the drop-down
menu.
• Facility Name: Displays the name of the site selected from the drop-down menu.
• Facility Address: Displays the address of the site selected from the drop-down menu.
• City: Displays the city of the site selected from the drop-down menu.
• State: Displays the state of the site selected from the drop-down menu.
• Postal Code: Displays the postal code of the site selected from the drop-down menu.
• Add Facility: Click the button to add the selected site to the main page from which you are
initiating the search.
• Cancel: Click the button to cancel the process of adding a site.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
31

Exhibit 3-23 shows a screen capture of the ‘Add Facility’ pop-up window:
Exhibit 3-23: Add Facility Pop-Up Window

Navigation: Click the ‘Add Facility’ button to add the selected site to the screen from which you
initiated the site identification process.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
32

PMN Secondary User

Anyone who plans to manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by Section 5 of TSCA to provide EPA with notice before
initiating the activity, known as a PMN submission. A PMN must be submitted at least ninety
(90) days prior to the manufacture or import of the chemical.
The PMN joint process is a multi-step process with coordination needed on the parts of Primary
and Secondary users (including AOs and Agents/Consultants). The Primary user will first
identify that a Joint Submission and/or Letter of Support(s) will supplement a form. Based on the
selection, the ‘Joint Submission’ folder and/or ‘Letter of Support’ folder will generate in the
navigation tree. Each folder will contain a section for the Primary user to enter contact
information and instruction information with the Joint and/or Letter of Support unique
identification number (ID).
When the Primary user enters the relevant ‘Joint’ or ‘Letter of Support’ folder, the user will enter
the Secondary AO or Secondary Agent/Consultant’s contact information on the first screen. The
Primary user will use the email address entered on this screen to send the Secondary user the
unique identification number. The next screen in the ‘Joint’ or ‘Letter of Support’ folder will
display the unique identification number that will be sent to the Secondary AO or Secondary
Agent/Consultant, and a text box for the Primary user to provide instructions or information to
the Secondary user about what is to be filed.
The Secondary user will register in CDX as a Secondary AO and access the Section 5 Notices
and Supports application. Once you arrive at the ‘Section 5 Notices and Supports Forms’ screen,
click the ‘Start New Form’ button and navigate to the ‘Create Passphrase’ screen. For ‘Joint
PMN’ and ‘Letter of Support’ forms, the process will work the same; other than being able to
enter a foreign address for ‘Letter of Support.’ Once the Secondary AO has created a new form
and assigned a passphrase, the Secondary AO may enter the required information on the form.
On the ‘Create Passphrase’ screen, the Secondary AO will enter the unique identification number
sent via email from the Primary AO’s form. Once the Secondary AO has entered the unique
identification number, the form will display.
4.1

Create Joint Submission

As a Secondary AO, you can start a new Letter of Support or Joint Submission and assign your
Supports to complete the form.
4.1.1

General Form Information (Joint PMN)

You can navigate to the ‘General Form Information’ screen by entering the unique identification
number provided by the AO and creating a passphrase on the ‘Create Passphrase’ screen. The
‘General Form Information’ screen allows you to identify information that is specific to the form
type selected from the ‘Section 5 Notices and Supports Forms’ screen.
The ‘General Form Information’ screen provides fields to input identifying information for a
specific form. You will have the option to assign a ‘Form Alias’ to identify the form. A unique
form alias is helpful when a user or company has multiple forms and/or when you must
differentiate between forms to the help desk. Upon navigating to the ‘General Form Information’
screen, the system auto-generates a default alias comprised of a form type, date stamp, and time
stamp in the following format: .

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
33

The ‘PMN Identification’ section provides fields for you to enter information regarding other
communications with EPA by entering a ‘TS Number’ and ‘Payment ID.’ The TS number is
determined by a company and is used to identify the form for both payment and to connect
related submissions when additional communications (Letters of Support, Joint Submissions, and
corrections) are sent before a PMN/LVE case number has been assigned. The TS number can be
any six (6) character alphanumeric combination. The TS number should include two (2), three
(3), or four (4) letters. Company names, recognizable words, and numeric series are not
recommended. A unique identification number for the form will generate later if a Letter of
Support or Joint Submission is being filed.
The ‘Test Data’ section allows you to identify data that is included in the notice the Primary AO
or Primary Agent/Consultant selected from the ‘Type of Notice’ drop-down menu. The
following values will display as checkboxes: ‘Environmental fate data,’ ‘Health effects data,’
‘Environmental effects data,’ ‘Physical/Chemical properties,’ ‘Risk assessments,’
‘Structure/Activity relationships,’ ‘Test data not in the possession or control of the submitter,’
and ‘Other data.’ If you check ‘Other Data,’ the system will not to allow you to enter in the
specific other information. More often than not, the remaining options under ‘Test Data’ provide
sufficient information for information included in the PMN form.
You are required to submit all test data in your possession or control and to provide a description
of all other data known to or reasonably ascertainable to you, if these data are related to the
health and environmental effects on the manufacture, processing, distribution in commerce, use,
or disposal of the new chemical substance. Standard literature citations may be submitted for
data in the open scientific literature. Complete test data (written in English), not summaries of
data, must be submitted if they do not appear in the open literature. You should clearly identify
whether test data is on the substance or on an analog. In addition, the chemical composition of
the tested material should be characterized. Data should be submitted according to the
requirements of §720.50 of the Premanufacture Notification Rule (40 Code of Federal
Regulations (CFR) Part 720).
• Form Alias: Enter the form alias. Upon navigating to the screen, the screen will autogenerate an editable form alias in the following format: . This is a required field.
• TS Number: Enter the TS number related to the PMN form; this field accepts any six (6)
character alphanumeric combination. It is used by the financial institution that receives
payment for EPA when it notifies the Agency that the fee has been received. The TS number
should include two (2), three (3), or four (4) letters. Company names, recognizable words,
and numeric series are not recommended. TS numbers should be unique to the submission
and should not be reused in subsequent submissions.
• Environmental fate data: Check the ‘Environmental fate data’ checkbox to indicate that the
form contains environmental fate data.
• Health effects data: Check the ‘Health effects data’ checkbox to indicate that the form
contains health effects data.
• Environmental effects data: Check the ‘Environmental effects data’ checkbox to indicate
that the form contains environmental effects data.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
34

• Physical/Chemical properties: Check the ‘Physical/Chemical properties’ checkbox to
indicate that the form contains physical/chemical properties data.
• Test data not in the possession or control of the submitter: Check the ‘Test data not in the
possession or control of the submitter’ checkbox to indicate that the form contains test data
not in the possession or control of the submitter.
• Risk assessments: Check the ‘Risk assessments’ checkbox to indicate that the form contains
risk assessments data.
• Structure/Activity relationships: Check the ‘Structure/Activity relationships’ checkbox to
indicate that the form contains structure-activity relationships (SAR) data.
• Other data: Check the ‘Other data’ checkbox to indicate that the form contains other types
of data.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
35

Exhibit 4-1 shows a screen capture of the ‘General Form Information’ screen (Joint Submission):
Exhibit 4-1: General Form Information Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Agent Information’ screen. You can also
access this screen by clicking the ‘Agent Information’ link within the navigation tree.
4.1.2

Agent Information

You can access the ‘Agent Information’ screen by clicking the ‘Next’ button from the ‘General
Form Information’ screen. You can also navigate to this screen by clicking the ‘Agent
Information’ link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
36

The ‘Agent Information’ screen provides fields for you to enter information regarding all parties
involved in representing the PMN form. The agent should be a person who can answer questions
about the form. The ‘Agent Information’ screen displays an ‘Add Agent’ button that generates
the ‘Add Agent’ pop-up window for you to input the contact information on behalf of whom the
submission is being made. You will be able to enter multiple agents; if the agent is the same
individual who is filling out the form, click the ‘Copy CDX Registration’ button to retrieve user
information entered during CDX registration. The system provides a checkbox for you to claim
entered contact information as confidential by checking the ‘Check here to claim this
information as CBI’ checkbox. Each agent will have an individual CBI claim. You will be able
to enter contact information for each agent, and click the ‘OK’ button, which will populate the
agent table located on the ‘Agent Information’ screen. Click the ‘Delete’ icon ( ) located under
the ‘Actions’ column to delete agents. To edit agent information, click the agent name link
within the ‘Last Name’ column, which will generate the ‘Add Agent’ pop-up window with the
previously entered agent information.
• Add Agent: Click the ‘Add Agent’ button to generate the ‘Add Agent’ pop-up window to
enter information for multiple agents.
• Last Name: Displays the last name of the reported agent. Click the ‘Last Name’ link to
generate the ‘Add Agent’ pop-up window and edit the agent information.
• First Name: Displays the first name of the reported agent.
• Address: Displays the mailing address of the reported agent.
• CBI: Indicates the CBI status of the agent information by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete specific agents; a warning message displays to
confirm deletion of the agent information.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
37

Exhibit 4-2 shows a screen capture of the ‘Agent Information’ screen (Joint Submission):
Exhibit 4-2: Agent Information Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Technical Contact Information’ screen.
You can also access this screen by clicking the ‘Technical Contact Information’ link within the
navigation tree.
4.1.2.1

Add Agent

Click the ‘Add Agent’ button to generate the ‘Add Agent’ pop-up window. Enter agent
information into the fields displayed on the ‘Add Agent’ pop-up window. Click the ‘Cancel’
button to stop populating agent information. Click the ‘OK’ button after entering agent
information to populate the information on the main ‘Agent Information’ screen.
The identification of an agent is optional.
• Copy CDX Registration: Click the ‘Copy CDX Registration’ button to display a prompt
confirming the import of CDX registration information and allow the system to populate the
agent information fields with your contact information provided during CDX registration.
• Check here to claim this information as CBI: Check the ‘Check here to claim this
information as CBI’ checkbox to claim agent information as confidential. If the ‘CBI’
checkbox is checked before clicking the ‘Copy CDX Registration’ button, the ‘CBI’
checkbox will become unchecked upon navigating back to the pop-up window after copying
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
38

CDX registration information. Check the ‘CBI’ checkbox after importing CDX registration
information to claim agent information as confidential.
• First Name: Enter the agent’s first name. Click the ‘Copy CDX Registration’ button to
populate the fields with CDX registration information. This is a required field only if agent
information will be added to the form.
• Last Name: Enter the agent’s last name. Click the ‘Copy CDX Registration’ button to
populate the fields with CDX registration information. This is a required field only if agent
information will be added to the form.
• Position: Enter the agent’s job title.
• Company Name: Enter the agent’s company name. Click the ‘Copy CDX Registration’
button to populate the fields with CDX registration information. This is a required field only
if agent information will be added to the form.
• Phone Number: Enter the agent’s daytime phone number: U.S. or international. This field
does not allow dashes. Click the ‘Copy CDX Registration’ button to populate the fields with
CDX registration information. This is a required field only if agent information will be added
to the form.
• Phone Extension: Enter the agent’s daytime phone number extension. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information.
• Email Address: Enter the agent’s email address. The email address must follow the standard
email address format: John.Doe@abc.com. Click the ‘Copy CDX Registration’ button to
populate the fields with CDX registration information.
• Mailing Address 1: Enter the first line of the agent’s mailing address. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information. This is a
required field only if agent information will be added to the form.
• Mailing Address 2: Enter the second line of the agent’s mailing address. Click the ‘Copy
CDX Registration’ button to populate the fields with CDX registration information.
• City: Enter the city of the agent’s mailing address. Click the ‘Copy CDX Registration’
button to populate the fields with CDX registration information. This is a required field only
if agent information will be added to the form.
• State: Select the state of the agent’s mailing address from the drop-down menu. Click the
‘Copy CDX Registration’ button to populate the fields with CDX registration information.
This is a required field only if agent information will be added to the form and if the
‘Country’ field is set to ‘United States.’ This field is disabled if a non-US country is selected
from the ‘Country’ drop-down menu.
• Postal Code: Enter the postal code of the agent’s mailing address. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information. This is a
required field only if agent information will be added to the form and if the ‘Country’ field is
set to ‘United States.’
Country: Select the country of the agent’s mailing address from the drop-down menu. Click
the ‘Copy CDX Registration’ button to populate the fields with CDX registration
information. This field is automatically set to ‘United States’ if a value is selected from the

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
39

‘State’ drop-down menu. This is a required field only if agent information will be added to
the form.
Exhibit 4-3 shows a screen capture of the ‘Add Agent’ pop-up window:
Exhibit 4-3: Add Agent Pop-Up Window

Navigation: Click the ‘Cancel’ button or the ‘X’ icon in the upper right-hand corner to stop
populating agent information and navigate back to the ‘Agent Information’ screen. Click the
‘OK’ button to populate the entered agent information and navigate back to the ‘Agent
Information’ screen.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
40

4.1.3

Technical Contact Information

You can access the ‘Technical Contact Information’ screen by clicking the ‘Next’ button from
the ‘Agent Information’ screen. You can also access this screen by clicking the ‘Technical
Contact Information’ link within the navigation tree.
The technical contact should be able to answer, or obtain answers to, questions related to the
chemical submitted to EPA within the joint PMN form or Letter of Support. The technical
contact does not have to physically work at the site reported on the form, but must be readily
available by phone or email. It is required to identify at least one technical contact.
The system provides functionality to enter multiple technical contacts. If the contact is the same
person who is filling out the form, the system presents a ‘Copy CDX Registration’ button for you
to retrieve your user information from CDX. You will enter the contact information for each
technical contact within the ‘Add Technical Contact’ window and click the ‘OK’ button at the
bottom of the window, which will populate the technical contacts table located on the ‘Technical
Contact Information’ screen. Click the ‘Delete’ icon ( ) located under the ‘Actions’ column to
delete a technical contact. Click the technical contact name within the ‘Last Name’ column to
edit technical contact information.
• Add Technical Contact: Click the ‘Add Technical Contact’ button to generate the ‘Add
Technical Contact’ pop-up window, which provides fields for you to enter technical contact
information.
• Last Name: Displays the last name of the reported technical contact. Click the ‘Last Name’
link to generate the ‘Add Technical Contact’ pop-up window that contains previously
identified technical contact information to edit the technical contact information.
• First Name: Displays the first name of the reported technical contact.
• Address: Displays the address of the reported technical contact.
• CBI: Indicates the CBI status of the technical contact information by displaying either a ‘Y’
or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete specific technical contacts. A pop-up
generates to confirm the deletion of the technical contact information.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
41

Exhibit 4-4 shows a screen capture of the ‘Technical Contact Information’ screen (Joint
Submission):
Exhibit 4-4: Technical Contact Information Screen (Joint Submission)

Navigation: Click the ‘Add Technical Contact’ button to begin the process of adding technical
contact information. Click the ‘Next’ button to navigate to the ‘Chemical Identification’ screen.
You can also access this screen by clicking the ‘Add Consolidated Chemical’ link within the
navigation tree.
4.1.3.1

Add Technical Contact

Click the ‘Add Technical Contact’ button to generate the ‘Add Technical Contact’ pop-up
window. Enter technical contact information into the fields displayed on the ‘Add Technical
Contact’ pop-up window. Click the ‘Cancel’ button to stop populating technical contact
information. Click the ‘OK’ button to populate the entered technical contact information on the
‘Technical Contact Information’ screen.
• Copy CDX Registration: Click the ‘Copy CDX Registration’ button to populate the fields
with your contact information provided during CDX registration. A prompt will display
confirming the import of CDX registration information.
• Check here to claim this information as CBI: Check the ‘Check here to claim this
information as CBI’ checkbox to claim the technical contact information as confidential. If
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
42

the ‘CBI’ checkbox is checked before clicking the ‘Copy CDX Registration’ button, the
‘CBI’ checkbox will become unchecked upon navigating back to the pop-up window after
copying CDX registration information. To claim a technical contact as confidential, check
the ‘CBI’ checkbox after importing CDX registration information.
• First Name: Enter the technical contact’s first name. Click the ‘Copy CDX Registration’
button to populate the fields with CDX registration information. This is a required field.
• Last Name: Enter the technical contact’s last name. Click the ‘Copy CDX Registration’
button to populate the fields with CDX registration information. This is a required field.
• Position: Enter the technical contact’s job title.
• Company Name: Enter the technical contact’s company name. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information. This is a
required field.
• Phone Number: Enter the technical contact’s daytime phone number. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information. This is a
required field.
• Phone Extension: Enter the technical contact’s phone number extension. Click the ‘Copy
CDX Registration’ button to populate the fields with CDX registration information.
• Email Address: Enter the technical contact’s email address. The email address must follow
the standard email address format: John.Doe@abc.com. Click the ‘Copy CDX Registration’
button to populate the fields with CDX registration information.
• Mailing Address 1: Enter the first line of the technical contact’s mailing address. Click the
‘Copy CDX Registration’ button to populate the fields with CDX registration information.
This is a required field.
• Mailing Address 2: Enter the second line of the technical contact’s mailing address. Click
the ‘Copy CDX Registration’ button to populate the fields with CDX registration
information.
• City: Enter the technical contact’s U.S. city of the mailing address. Click the ‘Copy CDX
Registration’ button to populate the fields with CDX registration information. This is a
required field.
• State: Select the state of the technical contact’s mailing address from the drop-down menu.
Click the ‘Copy CDX Registration’ button to populate the fields with CDX registration
information. This is a required field.
• Postal Code: Enter the postal code of the technical contact’s mailing address. Click the
‘Copy CDX Registration’ button to populate the fields with CDX registration information.
This is a required field.
Country: Displays ‘United States.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
43

Exhibit 4-5 shows a screen capture of the ‘Add Technical Contact’ pop- up window:
Exhibit 4-5: Add Technical Contact Pop-Up Window

Navigation: Click the ‘Cancel’ button or ‘X’ icon at the top right corner of the window to return
to the ‘Technical Contact Information’ screen without saving the technical contact information.
Click the ‘OK’ button to save and populate the entered technical contact information and
navigate back to the ‘Technical Contact Information’ screen.
4.1.4

Chemical Identification

You can access the ‘Chemical Identification’ screen by clicking the ‘Next’ button from the
‘Technical Contact Information’ screen. You may also click the ‘Add Consolidated Chemical’ or
‘Chemical Identification’ links within the navigation tree access the ‘Chemical Identification’
screen.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
44

The ‘Chemical Identification’ screen identifies the type of chemical the submitter will be
entering into the application. You will be able to file a Joint PMN form for a class 1 or 2
chemical substance or a polymer. Based on your selection, the appropriate screens for the
respective chemical will appear. If you select the ‘Class 1 or 2 Chemical Substance’ radio button,
click the ‘Save’ icon ( ) within the bottom action bar, or click the ‘Next’ button to generate the
‘Class 1 or 2 Chemical Substances’ screen within the navigation tree. If you identify the
chemical as a polymer by selecting the ‘Polymer’ radio button, click the ‘Save’ icon ( ) within
the bottom action bar, or click the ‘Next’ button to generate the ‘Polymer Identification
Information’ screen and the ‘Monomers and Other Reactants’ screen within the navigation tree.
This screen provides a field to identify an alias for the chemical substance, and allows you to
identify chemicals in a consolidated chemical submission. The chemical alias is required if a
Joint Submission or Letter of Support is being filed and renames the chemical folder within the
navigation tree.
• Class 1 or 2 Chemical Substance: Select the ‘Class 1 or 2 Chemical Substance’ radio button
to indicate that the chemical is a class 1 or 2 substance. If you select the ‘Polymer’ radio
button after initially selecting the ‘Class 1 or 2 Chemical Substance’ radio button, the
application generates a confirmation message warning you that you will lose all data for this
chemical if the chemical type changes. Selecting either the ‘Class 1 or 2 Chemical Substance’
or ‘Polymer’ radio button is required.
• Polymer: Select the ‘Polymer’ radio button to indicate that the chemical is a polymer. If you
select the ‘Class 1 or 2 Chemical Substance’ radio button after initially selecting the
‘Polymer’ radio button, the application generates a confirmation message warning you that
you will lose all data for this chemical if the chemical type changes. Selecting either the
‘Class 1 or 2 Chemical Substance’ or ‘Polymer’ radio button is required.
• Chemical Alias: Enter the chemical alias to associate with a chemical. This field will autogenerate a chemical alias in the navigation tree upon leaving the screen if this field is left
blank. This field is required.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
45

Exhibit 4-6 shows a screen capture of the ‘Chemical Identification’ screen (Joint Submission):
Exhibit 4-6: Chemical Identification Screen (Joint Submission)

Navigation: If you selected the ‘Class 1 or 2 Chemical Substance’ radio button, click the ‘Next’
button to navigate to the ‘Class 1 or 2 Chemical Substances’ screen. You can also access this
screen by clicking the ‘Class 1 or 2 Chemical Substances’ link within the navigation tree.
If you selected the ‘Polymer’ radio button, click the ‘Next’ button to navigate to the ‘Polymer
Identification Information’ screen. You can also navigate to this screen by clicking the ‘Polymer
Identification Information’ link within the navigation tree.
4.1.5

Class 1 or 2 Chemical Substances

You can access the ‘Class 1 or 2 Chemical Substances’ screen if you selected the ‘Class 1 or 2
Chemical Substance’ radio button on the ‘Chemical Identification’ screen and clicked the ‘Next’
button. You can also access this screen by clicking the ‘Class 1 or 2 Chemical Substances’ link
within the navigation tree.
The ‘Class 1 or 2 Chemical Substances’ screen provides fields for you to enter information
describing the chemical for which the PMN is to be filed. This screen will outline the unique
chemical properties that show the name, composition, and structure of the chemical. The system
provides fields for you to identify several key aspects concerning a chemical’s identity.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
46

For a single component submission, create the field set by clicking the ‘Add New Chemical’
button. Upon clicking the ‘Add New Chemical’ button, the application generates an
expandable/collapsible field set containing numerous fields for you to enter information
pertaining to that particular chemical.
For a multi-component submission, create another field set by clicking the ‘Add New Chemical’
button. Multi-component chemical submissions occur when two or more chemicals are always
generated together in a single pot and are never isolated. Upon clicking the ‘Add New Chemical’
button, the application generates a field set containing numerous fields for you to enter
information pertaining to that particular chemical. Enter additional chemical components, each
with unique identifying information, by clicking the ‘Add New Chemical’ button for each
additional chemical that is part of the multi-component mixture. All multi-component chemicals
will reside in one chemical folder in the navigation tree. Duplicate chemicals are not allowed
within a multi-component submission.
For a consolidated submission, create and identify chemicals in separate chemical folders by
clicking the ‘Add Consolidated Chemical’ link within the navigation tree.
If you select the ‘Class 1’ radio button on the ‘Class 1 or 2 Chemical Substances’ screen, click
the ‘Next’ button to navigate to the ‘Additional Chemical Information’ screen. If you select the
‘Class 2’ radio button on the ‘Class 1 or 2 Chemical Substances’ screen, click the ‘Next’ button
to navigate to the ‘Class 2 Substances’ screen.
For a class 1 substance chemical structure diagram, provide a complete and correct chemical
structure diagram. A class 1 structural diagram should clearly and completely indicate the
identity of the atoms and the nature and location of the bonds joining the atoms. Provide ionic
charges and known stereo chemical details. Carbon atoms in ring systems do not need to be
explicitly shown.
For a class 2 substance chemical structure diagram:
1) List the immediate precursor substances with their respective CASRN.
2) Describe the nature of the reaction or process.
3) Indicate the range of composition and the typical composition (where appropriate).
4) Provide a correct representative or partial chemical structure diagram, as complete as can
be known, if one can be reasonably ascertained.
Provide partial, complete, or representative structural diagrams to the extent possible. The
diagram should indicate the characteristic or variable compositional structural components of the
substance. If you are unsure of the exact structure, provide the best information you have and
indicate that it is your best estimate of the chemical structure.
• Add New Chemical: Click the button to generate the class 1 or 2 chemical substances
expandable/collapsible field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
47

• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• B.1.a. Class of Substance: In section B.1.a., select the ‘Class 1’ or ‘Class 2’ radio button to
identify whether a ‘Class 1’ or ‘Class 2’ chemical substance is being reported. Selecting the
‘Class 2’ chemical substance radio button indicates that some portions of the structure may
not be known and a ‘Class 2 Substances’ screen will appear within the navigation tree after
clicking the ‘Next’ button for you to enter information concerning how the chemical was
created. If multiple ‘Class 2’ chemical components are added, only one ‘Class 2 Substances’
screen will generate that applies to all the components. Check the ‘CBI’ checkbox to claim
the chemical substance class as confidential. Either the ‘Class 1’ or ‘Class 2’ radio button
must be selected.
• Class 1: Select the ‘Class 1’ radio button to identify the chemical as a ‘Class 1’ substance. A
‘Class 1’ substance is a single molecular entity that can be represented by a single, definite
structural diagram. Either the ‘Class 1’ or the ‘Class 2’ radio button in the ‘B.1.a. Class of
Substance’ section is required.
• Class 2: Select the ‘Class 2’ radio button to identify the chemical as a ‘Class 2’ substance. A
‘Class 2’ substance is a substance whose composition cannot be represented by a single,
definite chemical structural diagram. Class 2 substances include substances of unknown,
variable, or uncertain composition, complex mixtures or reaction products, or well-defined
substances without specific structures. Either the ‘Class 1’ or the ‘Class 2’ radio button in the
‘B.1.a. Class of Substance’ section is required.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Class of Substance’ as confidential.
• Search SRS: Click the ‘Search SRS’ button to generate the ‘Search Substance Registry
Services’ pop-up window. Refer to Section Error! Reference source not found. for
additional details regarding the search SRS functionality.
• CASRN: Displays the CASRN of the chemical identified on the ‘Search Substance Registry
Services’ pop-up window, if applicable.
• Chemical Name: Displays the chemical name of the chemical identified on the ‘Search
Substance Registry Services’ pop-up window. For class 1 substances, a ‘Chemical Abstracts
(CA) Index Name’ must be provided. For class 2 substances either a ‘CA Index Name’ or
‘CA Preferred Name’ must be provided, whichever is appropriate based on current CA
nomenclature rules and conventions. This is a required field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
48

• CBI: Check the ‘CBI’ checkbox to claim the ‘Chemical Name’ field as confidential and
generate the ‘Generic Chemical Name’ text field.
• B.6. Generic Chemical Name: Enter the generic name to associate with a chemical. This
field only displays when ‘CASRN’ and ‘Chemical Name’ are marked as ‘CBI.’ This is a
required field if there is no pending Letter of Support or Joint Submission for the form.
• Method 1 (CAS Inventory Expert Service): Select the ‘Method 1 (CAS Inventory Expert
Service)’ radio button to identify the ID method as the CAS Inventory Expert Service (IES)
method and generate the ‘IES Order #’ field. A copy of the identification report obtained
from the CAS Inventory Expert Services must be submitted as an attachment to this notice;
an IES report is required. For a consolidated submission, each chemical must be ‘Method 1’
except when the submission is pending a Letter of Support for that chemical. In the case of
an LVE/LOREX modification form type, this ‘Method 1’ requirement is not applicable. A
single response option in the ‘B.1.c. ID Method’ section is required if there is no pending
Letter of Support or Joint Submission for the form.
• Method 2 (Other Method): Select the ‘Method 2 (Other Method)’ radio button to identify
the ID method as ‘Other Method.’ An alternative method of providing a name, such as a
Scientific and Technical Information Network (STN) database report or a CAS Client
Services report, qualifies as ‘Method 2.’ The chemical can be ‘Method 2’ if the consolidated
submission is pending a Letter of Support. A single response option in the ‘B.1.c. ID
Method’ section is required if there is no pending Letter of Support or Joint Submission for
the form.
• IES Order #: Enter the IES order number of the report. This field only displays when the
‘Method 1 (CAS Inventory Expert Service)’ radio button is selected.
• B.1.d. Molecular Formula: Enter the molecular formula associated with a chemical. The
molecular formula must give the correct identity and number of atoms of each element
contained in the PMN molecule or a description if the substance is a class 2 material. The
system will not allow subscripts and superscripts to be used.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Molecular Formula’ data as confidential.
• Attachments: Select the section of the page the file is associated with that you intend to
attach from the drop-down menu. This drop-down menu contains the following values:
‘Chemical Structure Diagram’ and ‘ID Method.’ This is a required field to upload an
attachment.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for further details
regarding the attach document functionality.
• Section: Displays the section associated with a document.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
49

• Actions: Click the ‘Delete’ icon ( ) to delete the entire document row permanently from the
system; a warning message displays to confirm the deletion of the document.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
3.8for more information regarding the save functionality in an expandable/collapsible field
set.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
50

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
51

Exhibit 4-7 shows a screen capture of the ‘Class 1 or 2 Chemical Substances’ screen (Joint
Submission):
Exhibit 4-7: Class 1 or 2 Chemical Substances Screen (Joint Submission)

Navigation: If you select the ‘Class 1’ radio button, click the ‘Next’ button to navigate to the
‘Additional Chemical Information’ screen. You can also access this screen by clicking the
‘Additional Chemical Information’ link within the navigation tree. If you select the ‘Class 2’
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
52

radio button, click the ‘Next’ button to navigate to the ‘Class 2 Substances’ screen. You can also
access this screen by clicking the ‘Class 2 Substances’ link within the navigation tree.
4.1.6

Class 2 Substances

You can access the ‘Class 2 Substances’ screen by clicking the ‘Next’ button from the ‘Class 1
or 2 Chemical Substances’ screen when you select the ‘Class 2’ radio button for the ‘Class of
Substance’ field. You can also access this screen by clicking the ‘Class 2 Substances’ link within
the navigation tree.
The ‘Class 2 Substances’ screen captures information regarding a class 2 chemical substance. A
class 2 chemical substance is a substance that may not have a defined chemical structure that has
been identified. This screen provides fields to identify specific elements in the creation of the
chemical using the following fields: ‘Precursor Substances,’ ‘Nature of Reaction,’ and ‘Range of
Composition.’
Enter precursor substances by searching SRS or using manual entry when the substance is not in
SRS. The selected substances will display in a table listing the ‘Chemical Name’ and ‘CASRN.’
The system provides fields to capture ‘Nature of Reaction’ and ‘Range of Composition’ in text
boxes. The ‘Nature of Reaction’ and ‘Range of Composition’ text boxes can be claimed as CBI.
• B.1.e.1. Precursor Substances: This table captures the chemicals identified as immediate
precursor substances, along with the respective CASRNs, if applicable.
• CBI: Check the ‘CBI’ checkbox to claim the precursor substances information as
confidential.
• Search SRS: Click the ‘Search SRS’ button to generate the ‘Search Substance Registry
Services’ pop-up window. Refer to Section Error! Reference source not found. for
additional details regarding the search SRS functionality.
• Chemical Name: Displays the chemical name associated with a precursor substance. Click
the chemical name link to generate the ‘Search SRS’ pop-up window to make edits.
• CASRN: Displays the CASRN, if applicable, associated with a precursor substance.
• Actions: Click the ‘Delete’ icon ( ) to delete the entire chemical row permanently from the
system; a warning message displays to confirm the deletion of the chemical.
• B.1.e.2. Nature of Reaction: Enter the nature of the reaction or process description.
• CBI: Check the ‘CBI’ checkbox to claim the nature of reaction information as confidential.
• B.1.e.3. Range of Composition: Enter the range of composition and the typical composition
description. Provide the range of composition in weight percent for each specific component
or class of components that you intend to manufacture for commercial purposes.
• CBI: Check the ‘CBI’ checkbox to claim the range of composition information as
confidential.
• Attachments: Select the section of the page the document you intend to attach is associated
with from the drop-down menu. This drop-down menu contains the following values:
‘B.1.e.1. Precursor Substances,’ ‘B.1.e.2. Nature of Reaction,’ and ‘B.1.e.3. Range of
Composition.’ This is a required field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
53

• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window and initiate the document upload process. Refer to Section Error! Reference
source not found. for further details regarding the attach document functionality.
• Section: Displays the section associated with a document.
• File Name: Displays the file name and file extension of a file that is uploaded on the ‘Attach
Documents’ window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire document row permanently from the
system; a warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
54

Exhibit 4-8 shows a screen capture of the ‘Class 2 Substances’ screen (Joint Submission) (Scroll
1):
Exhibit 4-8: Class 2 Substances Screen (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
55

Exhibit 4-9 shows a screen capture of the ‘Class 2 Substances’ screen (Joint Submission) (Scroll
2):
Exhibit 4-9: Class 2 Substances Screen (Joint Submission) (Scroll 2)

Additional Chemical Information

You can navigate to the ‘Additional Chemical Information’ screen by selecting the ‘Class 1’
radio button on the ‘Class 1 or 2 Chemical Substances’ screen and clicking the ‘Next’ button, by
clicking the ‘Next’ button on the ‘Class 2 Substances’ screen, or clicking the ‘Next’ button from
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
56

the ‘Monomers and Other Reactants’ screen. You can also access this screen by clicking the
‘Additional Chemical Information’ link within the navigation tree.
The ‘Additional Chemical Information’ screen captures information regarding the chemicals
produced as byproducts and impurities when a chemical is manufactured. This screen also
captures other names for the chemical at hand in the ‘Synonyms’ and ‘Trade Identification’
tables.
An ‘Impurities’ table displays information regarding the impurities that may be reasonably
anticipated to be in the respective chemical or polymer as manufactured for commercial purpose.
Click the ‘Search SRS’ button to access the ‘Search SRS’ pop-up window and populate the
‘Impurities’ table. You will also be able to enter a chemical using the ‘Chemical Name’ and
‘CASRN’ field (if applicable) on the ‘Chemical Not Found In Substance Registry Services’ popup window. If there are unidentified impurities, enter “unidentified.” You also have the option of
claiming the chemical as confidential by checking the ‘CBI’ checkbox. A ‘Maximum %’ field is
also displayed which captures the maximum percentage for the impurity. Documents may be
attached for the ‘Impurities’ section if necessary.
A ‘Byproducts’ table provides fields to capture information regarding the byproducts that may be
produced from the manufacture of the respective chemical or polymer. Click the ‘Search SRS’
button to access the ‘Search SRS’ pop-up window and populate the ‘Byproducts’ table. You may
associate a CASRN with a byproduct (if applicable) and check the ‘CBI’ checkbox to claim a
byproduct as confidential. Documents may be attached for the ‘Byproducts’ section if necessary.
A ‘Synonyms’ table provides fields to capture the synonyms that the respective chemical or
polymer may be referred to in the documentation. A maximum of five synonyms can be entered
in the table. The search SRS functionality cannot be used to populate the ‘Synonyms’ table. You
may attach documents associated with the ‘Synonyms’ section to provide additional synonyms if
necessary.
A ‘Trade Identification’ table provides fields to capture information about the trade names by
which the respective chemical or polymer may be referred in documentation. There is no limit to
the number of trade names that may be added. You may attach documents associated with the
‘Trade Identification’ section to provide additional information if necessary.
The ‘Attach Documents’ pop-up window provides fields to upload documents related to the
‘Impurities,’ ‘Byproducts,’ ‘Synonyms,’ and/or ‘Trade Identification’ section(s). Select the
section of the page the document is associated with from the ‘Section’ drop-down menu, and
click the ‘Attach Document’ button to generate the ‘Attach Documents’ pop-up window and
attach a document. The system provides a ‘CBI’ checkbox to claim the uploaded document as
confidential. If you claim a document as CBI, the system requires you to upload the sanitized
version of the attached document.
If the sanitized version of the document is not provided, the Section 5 Notices and Supports form
will fail validation upon navigating away from the ‘Attach Documents’ window. To view or edit
previously attached documents, click the appropriate file name of the document within the ‘File
Name’ column of the attachments table.
The attachments table displays the section of the page the document is associated with, the file
name and file extension of the document, the document description, the number of pages in the
document, and if the document was claimed CBI. Click the ‘Delete’ icon ( ) located under the
‘Actions’ column to delete unwanted documents. Click a file name link in the ‘File Name’
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
57

column to generate the ‘Attach Documents’ pop-up window to view and/or edit an attached
document.
• B.3. Impurities – Search SRS: Click the ‘Search SRS’ button to display the ‘Search
Substance Registry Services’ pop-up window. Refer to Section Error! Reference source not
found. for further details regarding the search SRS functionality.
• Impurity: Displays the name of the impurity. An impurity is a chemical substance that you
did not intend to be present with your PMN substance. List all known impurities that are
present, regardless of their weight percent. List the expected maximum percentage of each
impurity and indicate its confidentiality status. An impurity may be suggestive of chemical
precursors or chemical processes. Click the ‘Impurity’ link to navigate to the ‘Search
Substance Registry Services’ pop-up window to edit chemical information for an impurity.
• CASRN: Displays the Chemical Abstracts Service Registry Number for the impurity (if
applicable).
• Maximum %: Displays the maximum percentage for the impurity; decimal values are
accepted.
• CBI: Indicates the CBI status of the impurity by displaying either a ‘Y’ or an ‘N.’
• Action: Click the ‘Delete’ icon ( ) to delete the entire impurity entry permanently from the
system; a warning message displays to confirm the deletion.
• B.7. Byproducts - Search SRS: Click the ‘Search SRS’ button to generate the ‘Search
Substance Registry Services’ pop-up window. Refer to Section Error! Reference source not
found. for further details regarding the search SRS functionality.
• Byproduct Name: Displays the name of the byproduct. Describe any byproducts resulting
from the manufacture, processing, use, or disposal of the new chemical substance. List any
byproducts that you reasonably anticipate will result from the manufacture, processing, use
and disposal of the new chemical substance at sites under your control. Click the ‘Byproduct
Name’ link to generate the ‘Search Substance Registry Services’ pop-up window to view
and/or edit byproduct information. Provide the specific chemical name, CAS numbers if they
can be determined, and the confidential status of the byproducts formed. If no byproducts are
formed, enter “None” or leave the section blank.
• CASRN: Displays the CASRN for the byproduct (if applicable).
• CBI: Indicates the CBI status of the byproduct by displaying either a ‘Y’ or an ‘N.’
• Action: Click the ‘Delete’ icon ( ) to delete the entire byproduct entry permanently from
the system; a warning message displays to confirm the deletion.
• B.4. Synonyms - CBI: Check the ‘CBI’ checkbox to claim the ‘Synonym’ field set as
confidential.
• Synonym: Enter the synonym of the chemical; there is a maximum of five chemical
synonyms that can be added in the ‘Synonyms’ table. Additional synonyms can be provided
in an attachment. Synonyms include common chemical names used in scientific or technical
literature, and code numbers or code names referenced in the PMN and its attachments.
Indicate which synonyms may be proprietary and require CBI protection. Chemical name
synonyms must be consistent with the chemical structure and thus not misleading. If you add
a blank, editable line in this table and click the ‘Next’ button, no error will display indicating
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
58

that the blank line should be saved or deleted. If text is entered in a blank field and you click
the ‘Next’ button, the application will save the entered value. If you click the ‘Form’ icon
( ), edit the entered values and click the ‘Next’ button without saving the changed value, an
error will generate.
• Actions: Click the ‘Add’ icon ( ) to add a new text field to enter additional synonyms.
Click the ‘Save’ icon ( ) to save a chemical synonym. Click the ‘Form’ icon ( ) that
appears after saving to edit a chemical synonym. Click the ‘Delete’ icon ( ) to delete a
previously added chemical synonym. To cancel changes to a field, simply clear the data
entered in the field.
• B.5. Trade Identification – CBI: Check the ‘CBI’ checkbox to claim the trade identification
section as confidential.
• Trade Name: Enter the trade identification name. List any trade name that is used or will be
used for the neat chemical substance, whether or not they are registered brands/trademarks.
There is no limit to the number of trade names that can be added. Check the ‘CBI’ checkbox
to indicate the CBI status of trade names. If you add a blank, editable line in this table and
click the ‘Next’ button, no error will display indicating that the blank line should be saved or
deleted. If text is entered in a blank field and you click the ‘Next’ button, the application will
save the entered value. If you click the ‘Form’ icon ( ), change the entered value(s) and
click the ‘Next’ button without saving the changed value(s), an error message will generate.
• Actions: Click the ‘Add’ icon ( ) to add a new text field to enter additional trade
identification names. Click the ‘Save’ icon ( ) to save a trade identification name. Click the
‘Form’ icon ( ) to edit a trade identification name. Click the ‘Delete’ icon ( ) to delete a
previously added trade identification name.
• Attachments: Select the section of the page with which the document is associated from the
drop-down menu. This drop-down menu contains the following values: ‘Byproducts
Section,’ ‘Impurities Section,’ ‘Synonyms Section,’ and ‘Trade Identification Section.’
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for further details
regarding the attach document functionality.
• Section: Displays the section of the page with which the document is associated.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Action: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system; a warning message displays to confirm deletion of the document.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
59

Exhibit 4-10 shows a screen capture of the ‘Additional Chemical Information’ screen (Scroll 1)
(Joint Submission):
Exhibit 4-10: Additional Chemical Information Screen (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
60

Exhibit 4-11 shows a screen capture of the ‘Additional Chemical Information’ screen (Joint
Submission) (Scroll 2):
Exhibit 4-11: Additional Chemical Information Screen (Joint Submission) (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Production Volume and Hazard/Safety
Information’ screen. You can also access this screen by clicking the ‘Production Volume and
Hazard/Safety Information’ link within the navigation tree.
4.1.8

Polymer Identification Information

You can access the ‘Polymer Identification Information’ screen by clicking the ‘Next’ button
from the ‘Chemical Identification’ screen if you select the ‘Polymer’ radio button. You can also

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
61

access this screen by clicking the ‘Polymer Identification Information’ link within the navigation
tree after selecting the ‘Polymer’ radio button on the ‘Chemical Identification’ screen.
The ‘Polymer Identification Information’ screen captures information describing the polymer(s)
for which the PMN will be filed. This screen outlines the unique chemical properties that show
the name, composition, and structure of the polymer. The system will provide fields for you to
identify several key aspects concerning a polymer’s identity.
Click the ‘Add New Chemical’ button to create a chemical field set. Upon clicking the ‘Add
New Chemical’ button, an expandable/collapsible field set generates that contains numerous
fields that pertain to the particular polymer. You are able to enter multiple chemical substances,
each with unique information, by clicking the ‘Add New Chemical’ button for each chemical
you wish to identify.
For a single component submission, create the field set by clicking the ‘Add New Chemical’
button. Upon clicking the ‘Add New Chemical’ button, the application generates a field set
containing numerous fields that captures information pertaining to that particular chemical.
For a multi-component submission, click the ‘Add New Chemical’ button to create a field set.
Multi-component chemical submissions occur when two or more chemicals always generate
together in a single pot and are never isolated. Upon clicking the ‘Add New Chemical’ button,
the application generates a field set that provides numerous fields to enter information pertaining
to that particular chemical. Enter additional chemical substances, each with unique identifying
information, by clicking the ‘Add New Chemical’ button for each additional chemical that is part
of the multi-component mixture. All multi-component chemicals will reside in one chemical
folder in the navigation tree.
For a consolidated submission, create separate chemical folders by clicking the ‘Add
Consolidated Chemical’ link within the navigation tree. A form may contain a maximum of six
(6) separate chemical folders.
• Add New Chemical: Click the ‘Add New Chemical’ button to generate a polymer
identification information expandable/collapsible field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set; a confirmation message displays to
confirm the deletion.
• Expand All: Click the link located at the upper-right of the expandable/collapsible field sets
to expand a series of field sets.
• Collapse All: Click the link located at the upper-right of the expandable/collapsible field sets
to collapse a series of field sets.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
62

• Search SRS: Click the button to generate the ‘Search SRS’ pop-up window. Refer to Section
Error! Reference source not found. for additional details regarding the search SRS
functionality.
• CASRN: Displays the CASRN of the chemical identified on the ‘Search SRS’ pop-up
window, if applicable.
• Chemical Name: Displays the name of the chemical that has been identified on the ‘Search
SRS’ pop-up window.
• CBI: Check the ‘CBI’ checkbox to identify the chemical as confidential.
• B.6 Generic chemical name: Enter the generic name to associate with a chemical. This field
displays when ‘Chemical Name’ and ‘CASRN’ are CBI. This is a required field.
• Method 1 (CAS Inventory Expert Service): Select the ‘Method 1 (CAS Inventory Expert
Service)’ radio button to identify the ID method as the ‘CAS Inventory Expert Service’
method. Submit a copy of the identification report obtained from the CAS Inventory Expert
Services as an attachment to this notice. For a consolidated submission, each chemical must
be ‘Method 1’ except when the submission is pending a Letter of Support for that chemical.
Select the ‘Method 1 (CAS Inventory Expert Service)’ radio button to generate the ‘IES
Order #’ field. A single response option in the ‘ID Method’ section is required if there is no
pending Letter of Support or Joint Submission for the form.
• IES Order #: Select the ‘Method 1 (CAS Inventory Expert Service)’ radio button to generate
this field. Enter the IES order number. This is a required field if there is no pending Letter of
Support or Joint Submission for the form.
• Method 2 (Other Method): Select the ‘Method 2 (Other Method)’ radio button to identify
the ID method as ‘Other Method.’ An alternative method of providing a name, such as a STN
database report or a CAS Client Services report, qualifies as ‘Method 2.’ If the chemical is
pending a Letter of Support, the method can only be ‘Method 2.’ A single response option in
the ‘ID Method’ section is required if there is no pending Letter of Support or Joint
Submission for the form.
• Attachments: Select the section of the page with which the document is associated from the
drop-down menu. This drop-down menu contains the following values: ‘Chemical Structure
Diagram’ and ‘ID Method.’ It is required that a document be attached for the ID Method if
there is no pending Letter of Support or Joint Submission for the form.
• Attach Document: Click the button to generate the ‘Attach Documents’ pop-up window.
Refer to Section Error! Reference source not found. for additional details regarding the
attach document functionality.
• Section: Displays the section of the page with which the file is associated.
• File Name: Displays the file name and file extension of a document that is uploaded on the
‘Attach Documents’ window.
• Description: Displays the description of a document.
• Pages: Displays the number of pages in a document.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
63

• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
3.8 for more information regarding the save functionality in an expandable/collapsible field
set.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
64

Exhibit 4-12 shows a screen capture of the ‘Polymer Identification Information’ screen (Joint
Submission) (Scroll 1):
Exhibit 4-12: Polymer Identification Information Screen (Joint Submission) (Scroll 1)

Navigation: Click the ‘Next’ button to navigate to the ‘Monomers and Other Reactants’ screen.
You can also access this screen by clicking the ‘Monomers and Other Reactants’ link within the
navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
65

4.1.9

Monomers and Other Reactants

You can navigate to the ‘Monomers and Other Reactants’ screen by clicking the ‘Next’ button
from the ‘Polymer Identification Information’ screen. You can also access this screen by clicking
the ‘Monomers and Other Reactants’ link within the navigation tree.
The ‘Monomers and Other Reactants’ screen is used to identify the chemical measurements and
monomers that make up a polymer. The screen is divided into two sections to identify different
elements describing a polymer: ‘Polymer Weight Information’ and ‘Monomers and Other
Reactants.’
In the ‘Monomers and Other Reactants’ section, enter the typical weight percent of each
monomer or other reactant in the polymer. Enter the maximum weight percent of each monomer
or other reactant that may be present as a residual in the polymer as manufactured for
commercial purposes. The maximum residual should be less than the typical composition. Do
not use parts per million (ppm) units (1 ppm = 0.0001 wt%).
To reference a monomer cleared with an LVE, include an attachment detailing any specifics.
Please note that in IE 7, the % symbols that display to the right of the ‘max. weight % below 500
molecular weight’ and ‘max weight % below 1000 molecular weight’ fields might be slightly
misaligned.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Polymer Weight Information’ section as
confidential.
• Method of Measurement: Only a single response option can be selected for ‘Method of
Measurement;’ valid values include ‘GPC’ and ‘Other (Specify).’ Gel-permeation
chromatography (GPC) is a well-established method for establishing the number average
molecular weight (M n ) and weight fractions below 500 and 1,000 Daltons. It may not be
useful for all polymer evaluations; however, solubility problems and misleading calibration
standards can lead to questionable GPC data. Correction estimates can be documented and
presented in cases where only a soluble fraction of the polymer can be analyzed. This is a
required field if there is no pending Letter of Support or Joint Submission for the form.
• Specify other method of measurement: Enter the method of measurement when you select
the ‘Other (Specify)’ radio button as the method of measurement. This is a required field
when the ‘Other (Specify)’ radio button is selected.
• (i) lowest number avg. molecular weight: Enter the lowest number average molecular
weight; the entered value must be a positive numerical value and can contain decimal values.
This is a required field if there is no pending Letter of Support or Joint Submission.
• (ii) max. weight % below 500 molecular weight: Enter the maximum weight percentage
below 500 molecular weight; the value entered must be a positive numerical value greater
than or equal to zero (0), but less than or equal to one hundred (100) and can contain decimal
values. This value must be less than or equal to the value specified in the ‘(iii) max. weight %
below 1000 molecular weight’ field. This is a required field if there are no pending Joint
Submissions or Letters of Support.
• (iii) max. weight % below 1000 molecular weight: Enter the maximum weight percentage
below 1,000 molecular weight; the value entered must be a positive numerical value greater
than or equal to zero (0) but less than or equal to one hundred (100) and can contain decimal
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
66

values. This value must be greater than or equal to the value specified in the ‘(ii) max. weight
% below 500 molecular weight’ field. This is a required field if there are no pending Joint
Submissions or Letters of Support.
• Add Monomer: Click the ‘Add Monomer’ button to generate the monomer
expandable/collapsible field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Search SRS: Click the ‘Search SRS’ button to generate the ‘Search Substance Registry
Services’ pop-up window. Refer to Section Error! Reference source not found. for additional
details regarding the search SRS functionality.
• Monomer or Other Reactant: Displays the monomer or other reactant name; this field
populates based on information entered on the ‘Search SRS’ pop-up window. This is a
required field.
• Include in Identity: Check the ‘Include in Identity’ checkbox to claim the value for
‘Monomer or Other Reactant’ as part of the monomer identification. This checkbox is most
applicable for monomers that are less than or equal to 2% since the monomer is not
considered to be included in the identity unless this checkbox is checked. This checkbox
appears when a value of ‘2’ or less is entered into the ‘Typical Composition’ text field.
• CBI: Check the ‘CBI’ checkbox to claim the monomer or other reactant name and CASRN
as confidential.
• CAS Registry Number: Displays the CASRN for the specified monomer; this field
populates based on information entered on the ‘Search SRS’ pop-up window.
• Chemical Name: Displays the name of the chemical identified on the ‘Search SRS’ pop-up
window.
• Typical Composition: Enter the typical composition value that a monomer contributes to a
polymer; the value entered must be a positive numerical value greater than zero (0) and less
than or equal to one hundred (100) and can contain decimal values. If the value entered is
less than or equal to ‘2’ a warning will be displayed in the global ‘Validate’ function or
during the submission process indicating that the typical composition is a value that is less
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
67

than or equal to 2 percent and asking you whether it should be included in the chemical
identity. This is a required field, and the value must be greater than zero (0).
• CBI: Check the ‘CBI’ checkbox to claim the ‘Typical Composition’ and ‘Include In Identity’
fields as confidential.
• Maximum Residual: Enter the maximum residual value. Indicate the maximum weight
percent of each monomer or other reactant that may be present as a residual in the polymer as
manufactured for commercial purposes. Enter a percent value less than or equal to the
maximum weight; do not use ppm units (1 ppm = 0.0001 wt%). The value entered must be a
positive numerical value that is less than or equal to the typical composition value. This is a
required field.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Maximum Residual’ field as confidential.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
3.8for more information regarding the save functionality in an expandable/collapsible field
set.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the document that is uploaded on the
‘Attach Documents’ pop-up window. Click the file name link to navigate to the ‘Attach
Documents’ pop-up window to make any edits.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion of the document.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
68

Exhibit 4-12 shows a screen capture of the ‘Monomers and Other Reactants’ screen (Joint
Submission) (Scroll 1):
Exhibit 4-12: Monomers and Other Reactants Screen (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
69

Exhibit 4-13 shows a screen capture of the ‘Monomers and Other Reactants’ screen (Joint
Submission) (Scroll 2):
Exhibit 4-13: Monomers and Other Reactants Screen (Joint Submission) (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Additional Chemical Information’
screen. You can also access this screen by clicking the ‘Additional Chemical Information’ link
within the navigation tree.
4.1.10
Production Volume and Hazard/Safety Information
You can navigate to the ‘Production Volume and Hazard/Safety Information’ screen by clicking
the ‘Next’ button from the ‘Additional Chemical Information’ screen. You can also access this
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
70

screen by clicking the ‘Production Volume and Hazard/Safety Information’ link within the
navigation tree.
The ‘Production Volume and Hazard/Safety Information’ screen collects different information
regarding a chemical’s production and hazard elements.
Production Volume: The ‘Production Volume’ section captures information about production
for the respective chemical or polymer for the ‘Maximum first 12-month production’ and the
‘Maximum 12-month production.’ The ‘Maximum first 12-month production’ value should be
less than or equal to the ‘Maximum 12-month production’ value. The maximum volume may not
exceed 100,000,000,000,000 kg/year for either field. The entered values will automatically
display decimal points upon navigating away from the page. Decimals are allowed up to the
milligram (.000001). Estimates should be on a 100% new chemical substance basis. Your
production volumes should be estimated as accurately as possible, but you are not bound to your
estimates unless you check the ‘Binding’ checkbox. Include amounts you intend to produce for
export. Provide an estimate of the first 12 months of production and the maximum production
volume for any consecutive 12-month period during the first three (3) years of commercial
manufacture. You may upload an attachment to enter additional production information.
Hazard Information: The ‘Hazard Information’ section captures information regarding hazards
that the company chooses to disclose. For EPA to take respirator use into account when
evaluating risks posed by a new chemical, the MSDS (material safety data sheet) for the
substance must specify a respirator that is appropriate for the types of anticipated exposures. For
the same reason, all respirators must be certified by the National Institute for Occupational
Safety and Health (NIOSH), and be referenced in the MSDS as “NIOSH certified” respirators.
If any type of risk assessment is prescribed to determine personal protective equipment (PPE)
requirements, such risk assessment must be performed by a qualified Industrial Hygienist (IH) or
other authorized occupational safety and health specialist.
Engineering controls are the preferred methods for managing workplace exposures to hazards. If
these controls are inadequate or lacking, personal protective equipment must be used.
For EPA to take glove use into account when evaluating risks posed by a new chemical, the
MSDS for the substance must specify gloves that are impervious to the substances of concern, as
well as suitable for the type of tasks.
Close-fitting goggles or a full-face piece facemask are preferred for vapor, mist, or fume
exposures, or wherever workplace contaminants can readily bypass loose-fitting equipment.
The information is collected in a file attachment. The system will display instructional text for
you to identify which forms should be uploaded.
Provide the MSDS for the PMN substance or intermediate or product mixture (that contains it) as
an attachment to the PMN. Also, include hazard warning statements or labels, if relevant. The
personal protection requirements of the MSDS become integral requirements of an LVE notice.
• CBI: Check the ‘CBI’ checkbox to claim the production volume information as confidential.
• Binding: Check the ‘Binding’ checkbox to claim the production volume information as
binding. This checkbox is enabled for LVE or LVE modifications only.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
71

• Maximum first 12-month production: Provide an estimate of the first 12 months of
production. The entered value must be a numerical value and must be greater than zero but
less than 100,000,000,000,000 kg/year. This field accepts decimals to the milligram and is a
required field if you do not have a pending Joint Submission and/or Letter of Support.
• Maximum 12-month production: Enter the data associated with the production volume.
Provide an estimate of the maximum production volume for any consecutive 12-month
period during the first three (3) years of commercial manufacture. The entered value must be
a numerical value and must be greater than zero but less than 100,000,000,000,000 kg/year.
This value must be greater than or equal to the ‘Maximum first 12-month production’ value.
This field accepts decimals to the milligram and is a required field if you do not have a
pending Joint Submission and/or Letter of Support.
• Binding: Check the ‘Binding’ checkbox to claim the hazard information as binding.
• Attachments: Select the section of the page with which the attached document is associated.
This drop-down menu contains the following value: ‘Production Information Section’ and
‘Hazard Information Section.’
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• Section: Displays the section with which the document is associated.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window. Click the file name link to navigate to the ‘Attach
Documents’ pop-up window to make any edits.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
72

Exhibit 4-14 shows a screen capture of the ‘Production Volume and Hazard/Safety Information’
screen (Joint Submission):
Exhibit 4-14: Production Volume and Hazard/Safety Information Screen (Joint
Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Use Information’ screen. You can also
access this screen by clicking the ‘Use Information’ link within the navigation tree.
4.1.11

Use Information

You can navigate to the ‘Use Information’ screen by clicking the ‘Next’ button from the
‘Production Volume and Hazard/Safety Information’ screen. You can also access this screen by
clicking the ‘Use Information’ link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
73

The ‘Use Information’ screen captures data about how the new chemical substance is intended to
be used by function and application. Function refers to the chemical purpose for which the
substance is designed and is often based on the physical and chemical properties of the
substance. Application refers to how the substance is used in particular processes or products. An
example of a function and application would be as a dispersive dye for finishing polyester fibers.
When you navigate to the screen, the screen contains instructional text and an ‘Add Use’ button.
When you click the ‘Add Use’ button, an expandable/collapsible field set opens and displays the
‘Use Information’ fields. Upon saving the entry, the expandable/collapsible field set collapses
and displays the ‘Category of Use’ and ‘Production %’ values.
You will first enter a description for the ‘Category of Use’ field. Each use will center on the
‘Category of Use’ and the different variables surrounding it. The category of use information
should be specific enough to allow EPA reviewers to anticipate potential exposure patterns for
the new substance (e.g. merely indicating “Dye” is not sufficient – is it photographic dye, a
reactive dye for nylon fibers, or a dye to be incorporated in a polymer making film?). LVE
notices limit you to your stated category of use(s), so make sure your description fully
encompasses all intended uses for any LVE. When you claim the ‘Category of Use’ as CBI, you
are required to enter a ‘Generic Use Description.’ The generic use description will be available
publicly.
The table captures the different elements of use that the PMN form captures. The ‘Production %’
and ‘% in Formulation’ values will be captured to indicate how the product will be used and at
what percent in that use. Each use must capture the percent of the production and percent in
formulation for each category of use. The ‘Production %’ must equal up to 100% for all uses if
there is no pending Letter of Support or Joint Submission for the form, and the field can be
declared CBI. The ‘% in Formulation’ value can equal up to 100%, and the field can be declared
CBI.
The ‘% of substance expected’ per use is captured for the following categories: ‘Site Limited,’
‘Consumer,’ ‘Industrial,’ and ‘Commercial.’ The ‘% of substance expected’ value must total
100%. The ‘% of substance expected’ values can be claimed as CBI or listed as binding. These
use types are used to determine the risks that the chemical will place on society.
• Add Use: Click the ‘Add Use’ button to add a new use information expandable/collapsible
field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
74

• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Category of Use: Enter the category of use for the specific chemical substance by function
and application. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the category of use information as confidential and
generate the ‘Generic Use Description’ field. Claiming the ‘Category of Use’ field as CBI
and then un-checking the ‘CBI’ checkbox generates a confirmation message that all attached
documents will be deleted.
• Binding: Check the ‘Binding’ checkbox to claim the category of use information as binding.
• C.2.b. Generic Use Description: Enter the generic use description of the chemical. This
field displays when the ‘Category of Use’ field is claimed CBI. If you claim any category of
use description as confidential, enter a generic description of that category. This field is
required when the ‘Category of Use’ field is claimed CBI.
• Total Production for this Use %: Enter an estimate of the percent of total production for
the first three years devoted to each category of use for the specific chemical. The entered
value must be a value greater than zero (0) but less than or equal to one hundred (100). The
‘Production %’ must equal up to 100% for all uses if there is no pending Letter of Support or
Joint Submission for the form. This field allows for decimal values. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Total Production for this Use’ information as
confidential.
• In Formulation %: Estimate the percent of the new substance as formulated in mixture,
suspensions, emulsions, solutions, or gels as manufactured for commercial purposes at sites
under your control associated with each category of use. The entered value must be a value
greater than zero (0) but less than or equal to one hundred (100) and can include decimal
values. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Percentage in Formulation’ information as
confidential.
• CBI: Check the ‘CBI’ checkbox to claim the percentage of substance expected per use
information as confidential.
• Binding: Check the ‘Binding’ checkbox to claim the percentage of substance expected per
use information as binding.
• Site Limited %: Enter the site limited percentage of substance expected per use for the
submitted substance. Blank fields are recognized as zeroes. This field allows for decimal
values. Break down the use(s) by percentage for the indicated end user categories. For
example, site-limited means the substance will only be used on the adjacent property unit
where manufactured and will not intentionally be removed from the site except for waste
disposal.
• Consumer %: Enter the consumer percentage of substance expected per use for the
submitted substance. Blank fields are recognized as zeroes. This field allows for decimal
values. Break down the use(s) by percentage for the indicated end user categories. Consumer
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
75

use means that private individuals will use the chemical substance or products containing the
substance for personal use or enjoyment.
• Industrial %: Enter the industrial percentage of substance expected per use for the
submitted substance. Blank fields are recognized as zeroes. This field allows for decimal
values. Break down the use(s) by percentage for the indicated end user categories. Industrial
use means that the chemical substance or product containing the substance will be used at the
locations of other manufacturers or processors.
• Commercial %: Enter the commercial percentage of substance expected per use for the
submitted substance. Blank fields are recognized as zeroes. This field allows for decimal
values. Break down the use(s) by percentage for the indicated end user categories. Indicate
percentage of product volume expected for the listed “use” sectors. Commercial use refers to
the chemical substance or product containing the chemical substance being used by a
company to provide a consumer service.
• If you have provided a “consumer” use, provide details: Enter consumer use details.
Provide a detailed description of the use(s) of this chemical substance in consumer products.
In addition, include estimates of the concentration of the new chemical substance as expected
in consumer products and describe the chemical reactions by which this substance loses its
identity in the consumer product. This is a required field if the ‘Consumer % of substance
expected per use’ field is populated and is a value greater than zero (0).
• CBI: Check the ‘CBI’ checkbox to claim the ‘If you have provided a ‘consumer’ use,
provide details’ information as confidential.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the file uploaded on the ‘Attach
Documents’ pop-up window. Click the ‘File Name’ link to navigate to the ‘Attach
Documents’ pop-up window to make any edits.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm deletion of the document.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
3.8for more information regarding the save functionality in an expandable/collapsible field
set.
Production Total: Displays the total production percentage for all uses. This value must be
equal to 100, unless a Joint Submission or Letter of Support is pending, in which case the
total value requirement is not immediately applicable.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
76

Exhibit 4-15 shows a screen capture of the ‘Use Information’ screen (Joint Submission) (Scroll
1):
Exhibit 4-15: Use Information Screen (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
77

Exhibit 4-16 shows a screen capture of the ‘Use Information’ screen (Joint Submission) (Scroll
2):
Exhibit 4-16: Use Information Screen (Joint Submission) (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Physical and Chemical Properties
Worksheet’ screen. You can also access this screen by clicking the ‘Physical and Chemical
Worksheet’ link within the navigation tree.
4.1.12

Physical and Chemical Properties Worksheet

You can navigate to the ‘Physical and Chemical Properties Worksheet’ screen by clicking the
‘Next’ button from the ‘Use Information’ screen. You can also access this screen by clicking the
‘Physical and Chemical Properties Worksheet’ link within the navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
78

The ‘Physical and Chemical Properties Worksheet’ screen is used to capture optional
information about a chemical’s properties. EPA uses the chemical properties to determine
additional safety data about a chemical; the properties are used to determine potential risks and
exposures of the chemicals.
The properties for a chemical are captured in an expandable/collapsible field set format. The
following categories may apply to a chemical: ‘Physical state of neat substance,’ ‘Vapor Pressure
@ temperature,’ ‘Density/relative density,’ ‘Solubility @ temperature ___ solvent ___,’
‘Solubility in water @ temperature ___,’ ‘Melting temperature,’ ‘Boiling/sublimation
temperature @ ____,’ ‘Spectra,’ ‘Dissociation constant,’ ‘Particle size distribution,’
‘Octanol/water partition coefficient,’ ‘Henry’s Law constant,’ ‘Volatilization from water,’
‘Volatilization from soil,’ ‘pH @ concentration [concentration],’ ‘Flammability,’
‘Explodability,’ and ‘Adsorption/coefficient.’ All of the properties will capture the relevant
values for a chemical. Each property may be claimed individually as CBI.
To enter physical/chemical property information, select a physical/chemical property from the
drop-down menu and click the ‘Add Property’ button. The expandable/collapsible field set
expands and displays all fields that should be entered for that property. You are then able to enter
all relevant information regarding that property. Value fields are able to accept ‘<’ or ‘>’
symbols. When all information is entered, click the ‘Save’ button. Each property may only be
entered once per chemical.
You may also enter an option for ‘Other.’ The ‘Other’ option will allow you to enter a userspecified property and any relevant values. The property will capture the relevant values for the
chemical and the property measurement can be identified as ‘Measured’ or ‘Estimate.’ The
‘Other’ option may be claimed individually as CBI. You may enter multiple properties as
‘Other.’
You may upload attachments for the chemical properties on the ‘Physical and Chemical
Properties Worksheet – Continued (Optional)’ screen.
EPA’s risk assessment process does utilize physiochemical properties, as some of the attributes
listed here can relate directly to chemical risks. Among the most useful parameters of a new
substance to EPA are the boiling point, the melting point, vapor pressure, the octanol/water
partition coefficient, water solubility, Henry’s Law Constant, hydrolysis, spectral data, mass
spectrometry (MS), proton and C13 Nuclear Magnetic Resonance (NMR), Infrared (IR), and
Ultraviolet (UV) absorption, and the soil/sediment absorption coefficient. In the absence of this
data, EPA will estimate to the extent possible physiochemical data to aid in their risk
evaluations.
Indicate whether the value you provide is based on an actual test measurement (‘Measured’) or is
based on an estimate (‘Estimate’). Note that EPA staffers indicate that data qualifiers such as
‘negligible’ or ‘soluble’ are not useful descriptions.
You are not required to generate the listed test data if you do not have it.
Physical/chemical properties data may be so unique that they could in the future link the PMN
substance to a commercial product or may tend to identify unique classes of chemical substance,
and therefore some data elements may represent confidential business information. Review the
CBI status of each entry carefully, and avoid making unsupportable claims.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
79

Please note that in IE 7, all physical/chemical properties you wish to add must be identified
before navigating away from this page; otherwise, the properties are removed from the ‘Add
Property’ drop-down menu. In addition, you will be able to add the ‘Henry’s Law constant’
property more than once, and the chemical property fields located within the
expandable/collapsible fields sets on this page will be disorganized. After clicking the ‘Next’
button, you will navigate to the ‘Physical and Chemical Properties Worksheet – Continued
(Optional)’ screen. After clicking the ‘Previous’ button, the physical/chemical properties have
been removed from the ‘Add Property’ drop-down menu.
• Add Property: Click the ‘Add Property’ button to add and open a new ‘Property’
expandable/collapsible field set for a selected property.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of an
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when an expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of an expandable/collapsible
field set to modify the information entered in the fields. The ‘Edit’ link displays when the
expandable/collapsible field set has been saved and the data is not currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of an
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Adsorption/Coefficient - Value: Enter the adsorption/coefficient value of the chemical
substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if the
‘Adsorption/coefficient’ property is selected.
• Adsorption/Coefficient - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Adsorption/coefficient’ property is selected.
• Adsorption/Coefficient – CBI: Check the ‘CBI’ checkbox to claim the
adsorption/coefficient property as confidential.
• Boiling/sublimation temperature @ – Value: Enter the boiling/sublimation temperature in
°C of the chemical substance. This is a required field if the ‘Boiling/sublimation temperature
@’ property is selected.
• Boiling/sublimation temperature @ [pressure] torr: Enter the value of the pressure in torr
for which the boiling/sublimation of the chemical substance was determined. Value fields are
able to accept ‘<’ or ‘>’ symbols. This is a required field if the ‘Boiling/sublimation
temperature @’ property is selected.
• Boiling/sublimation temperature @ - Measured or Estimate: Indicate whether the
property value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
80

from the drop-down menu. This is a required field if the ‘Boiling/sublimation temperature @’
property is selected.
• Boiling/sublimation temperature @ - CBI: Check the ‘CBI’ checkbox to claim the
‘Boiling/sublimation temperature @’ property as confidential.
• Density/relative density - Value: Enter the density/relative density value of the chemical
substance in g/cm3. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field
if the ‘Density/relative density’ property is selected.
• Density/relative density - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Density/relative density’ property is selected.
• Density/relative density - CBI: Check the ‘CBI’ checkbox to claim the ‘Density/relative
density’ property as confidential.
• Dissociation constant - Value: Enter the dissociation constant value of the chemical
substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if the
‘Dissociation constant’ property is selected.
• Dissociation constant - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Dissociation constant’ property is selected.
• Dissociation constant - CBI: Check the ‘CBI’ checkbox to claim the ‘Dissociation constant’
property as confidential.
• Explodability - Value: Enter the explodability value of the chemical substance. This field
allows text or numbers to be entered and is also able to accept ‘<’ or ‘>’ symbols. This is a
required field if the ‘Explodability’ property is selected.
• Explodability - Measured or Estimate: Indicate whether the property value is ‘Measured’
or based on an ‘Estimate’ by selecting the appropriate value from the drop-down menu. This
is a required field if the ‘Explodability’ property is selected.
• Explodability - CBI: Check the ‘CBI’ checkbox to claim the ‘Explodability’ property as
confidential.
• Flammability - Value: Enter the flammability value of the chemical substance. This field
allows text and is also able to accept ‘<’ or ‘>’ symbols. This is a required field if the
‘Flammability’ property is selected.
• Flammability - Measured or Estimate: Indicate whether the property value is ‘Measured’
or based on an ‘Estimate’ by selecting the appropriate value from the drop-down menu. This
is a required field if the ‘Flammability’ property is selected.
• Flammability - CBI: Check the ‘CBI’ checkbox to claim the ‘Flammability’ property as
confidential.
• Henry’s Law constant - Value: Enter the Henry’s law constant value of the chemical
substance in atm-m3/mole. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a
required field if the ‘Henry’s Law constant’ property is selected.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
81

• Henry’s Law constant - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Henry’s Law constant’ property is selected.
• Henry’s Law - CBI: Check the ‘CBI’ checkbox to claim the ‘Henry’s Law constant’
property as confidential.
• Melting Temperature - Value: Enter the melting temperature of the chemical substance in
°C. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if the ‘Melting
Temperature’ property is selected.
• Melting Temperature - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Melting Temperature’ property is selected.
• Melting Temperature - CBI: Check the ‘CBI’ checkbox to claim the ‘Melting
Temperature’ property as confidential.
• Octanol/water partition coefficient - Value: Enter the octanol/water partition coefficient
value of the chemical substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a
required field if the ‘Octanol/water partition coefficient’ property is selected.
• Octanol/water partition coefficient - Measured or Estimate: Indicate whether the property
value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the
drop-down menu. This is a required field if the ‘Octanol/water partition coefficient’ property
is selected.
• Octanol/water partition coefficient - CBI: Check the ‘CBI’ checkbox to claim the
‘Octanol/water partition coefficient’ property as confidential.
• Particle size distribution - Value: Enter the particle size distribution value of the chemical
substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if the
‘Particle size distribution’ property is selected.
• Particle size distribution - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Particle size distribution’ property is selected.
• Particle size distribution - CBI: Check the ‘CBI’ checkbox to claim the ‘Particle size
distribution’ property as confidential.
• Physical state of neat substance - Value: Select the physical state of a neat substance of
chemicals, which can be either a ‘Solid,’ ‘Liquid,’ or ‘Gas.’ This is a required field if the
‘Physical state of neat substance’ property is selected.
• Physical state of neat substance - Measured or Estimate: Indicate whether the property
value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the
drop-down menu. This is a required field if the ‘Physical state of neat substance’ property is
selected.
• Physical state of neat substance - CBI: Check the ‘CBI’ checkbox to claim the ‘Physical
state of neat substance’ property as confidential.
• pH @ concentration [concentration]: Enter the concentration at which the pH was
measured. This field allows for text. This is a required field.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
82

• pH @ concentration [concentration] - Value: Enter the pH value. This field allows text
and is also able to accept ‘<’ or ‘>’ symbols. This is a required field if the ‘pH @
concentration [concentration]’ property is selected.
• pH @ concentration [concentration] - Measured or Estimate: Indicate whether the
property value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value
from the drop-down menu. This is a required field if the ‘pH @ concentration
[concentration]’ property is selected.
• pH @ concentration [concentration] - CBI: Check the ‘CBI’ checkbox to claim the ‘pH @
concentration [concentration]’ property as confidential.
• Solubility @ temperature solvent: Enter the temperature value in °C for which the
solubility was measured. This field allows text and is also able to accept ‘<’ or ‘>’ symbols.
This is a required field.
• Solubility @ temperature solvent - Solvent: Enter the solvent that will be used for the
chemical substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field
if the ‘Solubility @ temperature solvent’ property is selected.
• Solubility @ temperature solvent - Value: Enter the solubility of the chemical substance in
g/L.
• Solubility @ temperature solvent - Measured or Estimate: Indicate whether the property
value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the
drop-down menu. This is a required field if the ‘Solubility @ temperature solvent’ property is
selected.
• Solubility @ temperature solvent - CBI: Check the ‘CBI’ checkbox to claim the ‘Solubility
@ temperature solvent’ property as confidential.
• Solubility in Water @ temperature: Enter the temperature value in °C of the chemical for
which the solubility in water was measured. This is a required field if the ‘Solubility in Water
@ temperature’ property is selected.
• Solubility in Water @ temperature - Value: Enter the solubility in water of the chemical
substance in g/L. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if
the ‘Solubility in Water @ temperature’ property is selected.
• Solubility in Water @ temperature - Measured or Estimate: Indicate whether the
property value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value
from the drop-down menu. This is a required field if the ‘Solubility in Water @ temperature’
property is selected.
• Solubility in Water @ temperature - CBI: Check the ‘CBI’ checkbox to claim the
‘Solubility in Water @ temperature’ property as confidential.
• Spectra - Value: Enter the spectra value of the chemical substance. Value fields are able to
accept ‘<’ or ‘>’ symbols. This is a required field if the spectra property is selected.
• Spectra - Measured or Estimate: Indicate whether the property value is ‘Measured’ or
based on an ‘Estimate’ by selecting the appropriate value from the drop-down menu. This is
a required field if the ‘Spectra’ property is selected.
• Spectra - CBI: Check the ‘CBI’ checkbox to claim the ‘Spectra’ property as confidential.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
83

• Vapor Pressure @ temperature: Enter the temperature value in °C of the chemical for
which the vapor pressure was measured. This is a required field if the property is selected.
• Vapor Pressure @ temperature - Value: Enter the value of the Vapor Pressure in torr units
of the chemical substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a
required field if the ‘Vapor Pressure @ temperature’ property is selected.
• Vapor Pressure @ temperature - Measured or Estimate: Indicate whether the property
value is ‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the
drop-down menu. This is a required field if the ‘Vapor Pressure @ temperature’ property is
selected.
• Vapor Pressure @ temperature - CBI: Check the ‘CBI’ checkbox to claim the ‘Vapor
Pressure @ temperature’ property as confidential.
• Volatilization from water - Value: Enter the volatilization from water value of the chemical
substance. Value fields are able to accept ‘<’ or ‘>’ symbols. This is a required field if the
‘Volatilization from water’ property is selected.
• Volatilization from water - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Volatilization from water’ property is selected.
• Volatilization from water - CBI: Check the ‘CBI’ checkbox to claim the ‘Volatilization
from water’ property as confidential.
• Volatilization from soil - Value: Enter the volatilization from soil value. Value fields are
able to accept ‘<’ or ‘>’ symbols. This is a required field if the ‘Volatilization from soil’
property is selected.
• Volatilization from soil - Measured or Estimate: Indicate whether the property value is
‘Measured’ or based on an ‘Estimate’ by selecting the appropriate value from the drop-down
menu. This is a required field if the ‘Volatilization from soil’ property is selected.
• Volatilization from soil - CBI: Check the ‘CBI’ checkbox to claim the ‘Volatilization from
soil’ property as confidential.
• Other: Enter any ‘Other’ property that you may specify.
• Other - Value: Enter an ‘Other’ property value. Value fields are able to accept ‘<’ or ‘>’
symbols. This is a required field if the ‘Other’ property was selected.
• Other - Measured or Estimate: Indicate whether the property value is ‘Measured’ or based
on an ‘Estimate’ by selecting the appropriate value from the drop-down menu. This is a
required field if the ‘Other’ property is selected.
• Other - CBI: Check the ‘CBI’ checkbox to claim the property as confidential.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
84

Exhibit 4-17 shows a screen capture of the ‘Physical and Chemical Properties Worksheet’ screen
(Joint Submission) (Scroll 1):
Exhibit 4-17: Physical and Chemical Properties Worksheet Screen (Joint Submission)
(Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
85

Exhibit 4-18 shows a screen capture of the ‘Physical and Chemical Properties Worksheet’ screen
(Joint Submission) (Scroll 2):
Exhibit 4-18: Physical and Chemical Properties Worksheet Screen (Joint Submission)
(Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Physical and Chemical Properties
Worksheet – Continued (Optional)’ screen. You can also access this screen by clicking the
‘Physical and Chemical Properties Worksheet – Continued (Optional)’ link within the navigation
tree.
4.1.13

Physical and Chemical Properties Worksheet – Continued (Optional)

You can navigate to the ‘Physical and Chemical Properties Worksheet – Continued (Optional)’
screen by clicking the ‘Next’ button from the ‘Physical and Chemical Properties Worksheet’
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
86

screen. You can also access this screen by clicking the ‘Physical and Chemical Properties
Worksheet – Continued (Optional)’ link within the navigation tree.
The ‘Physical and Chemical Properties Worksheet – Continued (Optional)’ screen is used to
capture all the studies and attachments that refer to the chemical properties captured on the
‘Physical and Chemical Properties Worksheet’ screen. When you first access the ‘Physical and
Chemical Properties Worksheet – Continued (Optional)’ screen, instructional text, an ‘Attach
Document’ button, and an attachments table display.
When you attach a document, the properties that were selected on the ‘Physical and Chemical
Properties Worksheet’ screen will be listed with checkboxes in the ‘Attach Documents’ window
for you to select with which properties an attachment is associated. Check the properties that are
relevant to the document, and then select a type and subtype value for the document. You will be
able to attach a document, enter a description of the document, and list the number of pages.
The system provides functionality to claim an uploaded document as CBI. If a document is
claimed as CBI, the system requires you to upload the sanitized version of the attached
document. To view, open, or edit previously attached documents, click the appropriate file name
of the document within the ‘File Name’ column of the attachment table.
The attachment table displays the ‘File Name,’ ‘Properties,’ ‘Description,’ ‘Pages,’ ‘CBI,’ and
‘Actions’ columns. Click the ‘Delete’ icon ( ) located under the ‘Actions’ column to delete
unwanted documents.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the original file that is uploaded on
the ‘Attach Documents’ pop-up window. Click the ‘File Name’ link to navigate to the
‘Attach Documents’ pop-up window to make any edits.
• Properties: Displays the chemical properties associated with a document.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
87

Exhibit 4-19 shows a screen capture of the ‘Physical and Chemical Properties Worksheet –
Continued (Optional)’ screen (Joint Submission):
Exhibit 4-19: Physical and Chemical Properties Worksheet – Continued (Optional) Screen
(Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Site Information’ screen if you have not
identified another chemical. You can also access this screen by clicking the ‘Site Information’
link within the navigation tree. If you would like to add a consolidated chemical, click the ‘Add
Consolidated Chemical’ link within the navigation tree.
4.1.14

Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents

You can navigate to the ‘Attach Documents’ window by clicking the ‘Attach Document’ button
on the ‘Physical and Chemical Properties Worksheet – Continued (Optional)’ screen.
When attaching a document, the properties selected on the ‘Physical and Chemical Properties
Worksheet’ screen will display with checkboxes to allow the properties to which the attachment
refers to be selected. Select the type and subtype for the attachment and the properties relevant to
the document, attach the document, and enter the number of pages.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
88

The system allows the uploaded document to be claimed as CBI. If a document is claimed as
CBI, the system requires the sanitized version of the attached document to be uploaded. To
access or edit previously attached documents, click the appropriate file name of the document
within the ‘File Name’ column of the attachment table.
• Type: Select the document type from the drop-down menu.
• Subtype: Select the document subtype from the drop-down menu.
• Chemical Properties: Displays the physical and/or chemical properties identified on the
‘Physical and Chemical Properties Worksheet’ screen that can be potentially associated with
a document. Check the appropriate chemical properties that are associated with a document
that is being attached. These checkboxes are enabled only if ‘Physical Chemical Property’ is
selected from the ‘Type’ drop-down menu.
• Attachment: Displays the ‘Browse’ button to search for and identify documents on your
local hard drive to be attached that can be associated with the physical/chemical properties
identified on the ‘Physical and Chemical Properties Worksheet’ screen.
• Description: Enter the description associated with a document.
• Pages: Enter the number of pages a document contains.
• CBI: Check the ‘CBI’ checkbox to claim the document as confidential.
• Sanitized Attachment: Click the ‘Browse’ button to generate the ‘File Upload’ window to
search for a particular file on your hard drive. For any attached document claimed as CBI,
you are required to attach a sanitized version of the document.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
89

Exhibit 4-20 shows a screen capture of the ‘Physical and Chemical Properties Worksheet –
Continued (Optional) Attach Documents’ pop-up window (Scroll 1):
Exhibit 4-20: Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents Pop-Up Window (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
90

Exhibit 4-21 shows a screen capture of the ‘Physical and Chemical Properties Worksheet –
Continued (Optional) Attach Documents’ pop-up window (Joint Submission) (Scroll 2):
Exhibit 4-21: Physical and Chemical Properties Worksheet – Continued (Optional) Attach
Documents Pop-Up Window (Joint Submission) (Scroll 2)

Navigation: Click the ‘Cancel’ button or ‘X’ icon located in the upper right-hand corner to stop
the process of adding document information. Click the ‘OK’ button to save the entered

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
91

information and navigate back to the ‘Physical and Chemical Properties Worksheet – Continued
(Optional)’ screen.
4.1.15

Site Information

You can navigate to the ‘Site Information’ screen by clicking the ‘Next’ button from the
‘Physical and Chemical Properties Worksheet – Continued (Optional)’ screen. You can also
access this screen by clicking the ‘Site Information’ link within the navigation tree.
The ‘Site Information’ screen captures information about the identification of submittercontrolled sites and sites controlled by others. If a user indicates there are submitter-controlled
sites, the ‘Submitter Operation Information,’ ‘Occupational Exposures,’ and ‘Environmental
Releases’ screens are automatically generated within the ‘Submitter Controlled Operations’
folder within the navigation tree. If a user indicates there are sites controlled by others, the
‘Industrial Sites Controlled By Others,’ ‘Exposures/Releases,’ and ‘Byproduct Information’
screens automatically generate within the ‘Operations Controlled By Others’ folder within the
navigation tree upon clicking the ‘Next’ button. Toll manufacturing sites are considered sites
controlled by the submitter.
• Do you have sites controlled by the submitter?: Select the ‘Yes’ radio button to indicate
that you have submitter controlled sites to identify; this response automatically generates the
screens within the ‘Submitter Controlled Operations’ folder in the navigation tree upon
clicking the ‘Next’ button. Select the ‘No’ radio button if you do not have any submittercontrolled sites to identify. An error message displays if a submitter-controlled site displays
within the navigation tree and the ‘No’ radio button is selected.
• Do you have sites controlled by others?: Select the ‘Yes’ radio button to indicate that you
have sites controlled by others to identify; this response automatically generates the screens
within the ‘Operations Controlled by Others’ folder in the navigation tree upon clicking the
‘Next’ button. Select the ‘No’ radio button if you do not have any sites controlled by others
to identify. An error message displays if a site controlled by others displays within the
navigation tree and the ‘No’ radio button is selected.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
92

Exhibit 4-22 shows a screen capture of the ‘Site Information’ screen (Joint Submission):
Exhibit 4-22: Site Information Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Sites Controlled By Others’ screen. You
can also access this screen by clicking the ‘Sites Controlled By Others’ link within the
navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
93

4.1.16

Sites Controlled By Others

You can navigate to the ‘Sites Controlled By Others’ screen by clicking the ‘Next’ button from
the ‘Site Information’ screen. You can also access this screen by clicking the ‘Sites Controlled
By Others’ link within the navigation tree.
The ‘Sites Controlled By Others’ screen captures information about known and/or unknown sites
not controlled by the submitter. Complete the ‘Operations Controlled By Others’ section within
the navigation tree for typical processing or use operations involving the new chemical substance
at sites not controlled by the submitter. Importers do not have to complete this section for
operations outside the U.S.; however, you must report any processing or use activities after
import. Complete a separate ‘Operations Controlled By Others’ section for each type of
processing, or use operation involving the new chemical substance. If the same operation is
performed at more than one site, describe the typical operation common to these sites. The
screen first captures whether there is any data for other controlled sites. If there is no data for
sites controlled by others, the screen will not update and the option of selecting the ‘Next’ button
is available. If there is data for sites controlled by others, an additional question will appear. The
screen then captures whether site-specific data for the chemical is known for ‘Sites Controlled
By Others.’ If you indicate that there is site-specific data by selecting the ‘Yes’ radio button, the
screen will generate a text field to enter the ‘# of unknown sites’ and a ‘CBI’ checkbox to claim
the number of unknown sites as confidential. If there is no site-specific data, the screen displays
a text box to capture the number of unknown sites.
Please note that in IE 7, after adding a site, the ‘# of unknown sites’ text box label disappears but
the text field and ‘CBI’ checkbox are still displayed.
• Do you have any sites controlled by others for which you have information to report?: If
you select ‘Yes’ the screen will display the question ‘Do you have site-specific information?’
If you select ‘No’ only the listed navigation options will display. If an operation controlled
by others displays within the navigation tree, the ‘Yes’ radio button must be selected for this
question.
• Do you have site-specific information?: If you select ‘Yes’ the screen generates fields to
capture specific site information. If you select ‘No,’ an error message displays indicating that
any other sites you have will be deleted.
• # of unknown sites: Enter the number of unknown sites; zero (0) is an acceptable value. This
is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the number of unknown sites as confidential.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
94

Exhibit 4-23 shows a screen capture of the ‘Sites Controlled By Others’ screen (Joint
Submission):
Exhibit 4-23: Sites Controlled By Others Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Submitter Operation Information’ screen.
You can also access this screen by clicking the ‘Submitter Operation Information’ link within the
navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
95

4.1.17

Submitter Operation Information

You can navigate to the ‘Submitter Operation Information’ screen by clicking the ‘Next’ button
from the ‘Sites Controlled By Others’ screen. You can also access this screen by clicking the
‘Submitter Operation Information’ link under the ‘Submitter Controlled Operations’ folder
within the navigation tree. You can add additional sites by clicking the ‘Add Operation’ link
within the navigation tree under the ‘Submitter Controlled Operations’ folder.
The ‘Submitter Operation Information’ screen captures information about an operation that
occurs at a particular site or group of sites. You are asked a series of questions and, based on the
responses, a series of fields displays regarding a specific operation. The guided approach is
designed to eliminate errors and ensure the completion of all relevant sections for a site. You will
be able to enter an operation alias to identify the operation. Importers are not required to
complete this section for operations outside the U.S.; however, any industrial processing or use
operation that takes place after import must be described. It should be noted that Toll
manufacturing sites are considered to be sites controlled by the submitter.
You will first be asked to select the site(s) and chemical(s) for the operation and will then select
the applicable operation type checkboxes.
If you select an option other than ‘Use’ for the operation type, you will be asked whether the
chemical is manufactured or processed as a ‘batch’ or ‘continuous’ process. Based on the
property selected, fill in the relevant information. If you select the ‘Use’ operation type, then
there will be no further options on this screen. The follow-up screens are used to capture specific
information about the operation type process.
The system provides a text box for describing the process description. Additional process
information may also be included in an attachment. In the process description, include the
following information: (1) Diagram the major unit operation steps and chemical conversions.
Include interim storage and specify transport containers (e.g., 5-gallon pails, 55-gallon drum, rail
car, tank truck, etc.). (2) Provide the identity, approximate weight (by kilograms (kg) kg/day or
kg/batch on a new chemical substance basis), and entry point of all starting materials, feedstocks
(including reactants, solvents, catalysts, etc.), products, recycle streams, and wastes. Include
cleaning chemicals (note frequency if not used daily or per batch). (3) Identify by number the
points of release, including small or intermittent releases, to the environment of the new
chemical substance. If releasing to two media at the same step, assign a second release number
for the second medium.
You may claim the process description or attachment as CBI. If an attached document is claimed
as CBI, the system requires a sanitized version of the attached document to be uploaded. To
access or edit previously attached documents, click the file name of the document within the
‘File Name’ column of the document table.
The document table displays the file name and file extension of the document, the document
description, the number of pages in the document, and whether a sanitized copy of the document
was attached. Click the ‘Delete’ icon ( ) under the ‘Actions’ column to delete unwanted
documents.
• Operation Alias: Enter the operation alias. This field makes it easier to distinguish between
operations in the navigation tree when there is more than one operation. This is a required
field if the form is pending a Joint Submission or a Letter of Support.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
96

• Add Facility: Click the button to generate the ‘Add Facility’ pop-up window and select a site
from the drop-down menu to add to the ‘Submitter Operation Information’ screen.
• Site Name: Displays the site name.
• Address: Displays the site address.
• City: Displays the site city.
• State: Displays the site state.
• Postal Code: Displays the site postal code.
• CBI: Indicates the CBI status of the site by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete a site from the table. A warning message
displays to confirm the deletion of the site.
• Select the chemical(s) that this submission pertains to: Displays all consolidated
chemicals in a PMN submission with associated checkbox(es).
• CBI: Check the ‘CBI’ checkbox to claim the operation type as confidential.
• Manufacturing: Check the ‘Manufacturing’ checkbox to indicate that manufacturing is
taking place at the site. Checking the ‘Manufacturing’ checkbox generates the ‘Is it batch or
continuous’ radio buttons.
• Processing: Check the ‘Processing’ checkbox to indicate that processing is taking place at
the site. Checking the ‘Processing’ checkbox generates the ‘Is it batch or continuous’ radio
buttons.
• Use: Check the ‘Use’ checkbox to indicate that chemical use is taking place at the site.
• CBI: Check the ‘CBI’ checkbox to claim the amount and duration information as
confidential.
• Is it batch or continuous?: Select the ‘Batch’ radio button to indicate that the chemical is
produced in a batch process. Select the ‘Continuous’ radio button to indicate that the
chemical is produced on a continuous basis. Either the ‘Batch’ or ‘Continuous’ radio button
is required to be selected.
• Max kg/batch: Enter the maximum number of kilograms produced per batch. This field only
displays when you select the ‘Batch’ radio button and is a required field. This field accepts
decimal values.
• Hours/batch: Enter the hours of manufacturing or processing time needed per batch. This
field only displays when you select the ‘Batch’ radio button and is a required field. This field
accepts decimal values.
• Batches/year: Enter the number of batches produced per year. This field only displays when
you select the ‘Batch’ radio button and is a required field. This field accepts decimal values.
• Max kg/day: Enter the maximum number of kg of a chemical produced per day. This field
only displays when you select the ‘Continuous’ radio button and is a required field. This field
accepts decimal values.
• Hours/day: Enter the number of hours per day that the chemical is processed or
manufactured; this value cannot exceed 24. This field only displays when you select the
‘Continuous’ radio button and is a required field. This field accepts decimal values.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
97

• Days/year: Enter the number of days per year that the chemical is processed or
manufactured; this value cannot exceed 365. This field only displays when you select the
‘Continuous’ radio button, and is a required field. This field accepts decimal values.
• CBI: Check the ‘CBI’ checkbox to claim the process description as confidential.
• Process Description: Enter the process description. In the ‘Process Description’ text box, or
an attachment, address the following items: (1) Diagram the major unit operation steps and
chemical conversions. Include interim storage and transport containers (specify – e.g., 5gallon pails, 55-gallon drum, rail car, tank truck, etc.). (2) Provide the identity, the
approximate weight (by kg/day or kg/batch on a 100% new chemical substance basis), and
entry point of all starting materials and feedstocks (including reactants, solvents, catalysts,
etc.), and of all products, recycle streams, and wastes. Include cleaning chemicals (note
frequency if not used daily or per batch). (3) Identify by number the points of release,
including small or intermittent releases, to the environment of the new chemical substance. If
releasing to two media at the same step, assign a second release number for the second
medium. Either this field is required or a document must be attached.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
98

Exhibit 4-24 shows a screen capture of the ‘Submitter Operation Information’ screen (Joint
Submission) (Scroll 1):
Exhibit 4-24: Submitter Operation Information Screen (Joint Submission) (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
99

Exhibit 4-25 shows a screen capture of the ‘Submitter Operation Information’ screen (Joint
Submission) (Scroll 2):
Exhibit 4-25: Submitter Operation Information Screen (Joint Submission) (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Occupational Exposures’ screen. You
can also access this screen by clicking the ‘Occupational Exposures’ link within the navigation
tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
100

4.1.18

Occupational Exposures

You can navigate to the ‘Occupational Exposures’ screen by clicking the ‘Next’ button from the
‘Submitter Operation Information’ screen. You can also access this screen by clicking the
‘Occupational Exposures’ link within the navigation tree.
Click the ‘Add’ button to generate an expandable/collapsible field set to enter occupational
exposure information. The application displays fields for you to enter information for ‘Worker
Category (1),’ ‘Worker Activity (1),’ ‘Protective Equipment/Engineering Controls (3),’ ‘Physical
Form(s) (5),’ ‘% New Substance (5),’ ‘# Workers Exposed (8),’ ‘Maximum Duration Hours/Day
(10),’ and ‘Maximum Duration Days/Year (11).’ EPA is attempting to estimate exposure levels,
the number of workers potentially exposed, and possible routes and duration of exposure to the
PMN substance. Work with your plant engineers to develop accurate data; review the CBI status
of data you provide.
Information entered into the ‘Maximum Duration Hours/Day (10)’ and ‘Maximum Duration
Days/Year (11)’ fields must be a positive whole number or decimal. The system does not allow
special characters to be saved in these fields. If further explanation is required regarding duration
of exposure, please provide this in an attachment.
• Add: Click the ‘Add’ button to generate the ‘Occupational Exposure – Submitter Controlled
Sites’ expandable/collapsible field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and remove the field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion. The ‘Delete’ icon ( ) displays when the user has clicked the ‘Add’
button.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Worker Category (1): Select the category of work from the drop-down menu in which a
worker may be exposed to a chemical substance. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim worker category information as confidential.
• Worker Activity (1): Select the worker activity (e.g. bag dumping, tote filling, unloading
drums, sampling, cleaning, etc.) in which workers may be exposed to a chemical substance.
Please note that if you are populating this field via an XML file created from the ePMN thick
client, this drop-down menu will not populate. This is a required field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
101

• User Defined Worker Activity: Enter the worker activity in which workers may be exposed
to a chemical substance. This field displays only for certain worker activity values.
• Protective Equipment/Engineering Controls (3): Enter the protective
equipment/engineering controls used to protect workers. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the protective equipment/engineering controls
information as confidential.
• Binding: Check the ‘Binding’ checkbox to claim the protective equipment/engineering
controls information as binding.
• Physical Form(s) (5): Enter the physical forms(s) of the new chemical substance (e.g., solid,
crystal, granule, powder, or dust) at the time of exposure. Be as specific as possible on the
physical form (e.g., is the PMN substance isolated as a crystalline or amorphous powder, wet
cake, flake solid, granular solid, or a fused solid?). If data on particle size of solids are
available, it should be included as an attachment. For wet cakes, a percent moisture estimate
may prevent EPA from making an estimate that is too conservative. Please pay particular
attention to the information within if this field is populated via XML file. The information
contained within the ‘Physical Forms and % New Substance’ field in the thick client
separates into two (2) separate fields, the ‘Physical Form(s)’ field and ‘% New Substance’
field when these fields are populated via an XML file generated from the ePMN thick client.
This is a required field.
• Binding: Check the ‘Binding’ checkbox to claim the physical form(s) information as
binding.
• % New Substance (5): Enter the percentage of new chemical substance (if part of a mixture)
at the time of exposure. A value of zero (0) entered in this field will display an error. Please
pay particular attention to the information if this field is populated via XML file. The
information contained within the ‘Physical Forms and % New Substance’ field in the thick
client separates into two (2) separate fields, the ‘Physical Form(s)’ field and ‘% New
Substance’ field when these fields are populated via an XML file generated from the ePMN
thick client. This is a required field that accepts decimal values.
• Binding: Check the ‘Binding’ checkbox to claim the percentage new substance information
as binding.
• # Workers Exposed (8): Enter the number of workers exposed. Estimate the maximum
number of all workers involved in each activity for all sites combined. This is a required
field.
• CBI: Check the ‘CBI’ checkbox to claim the number of workers exposed as confidential.
• Hours/Day (10): Enter the maximum duration occupational exposure occurs for the activity
for any worker in hours per day; this field allows decimal values. A value of zero (0) entered
in this field will display an error. This is a required field.
• Days/Year (11): Enter the maximum duration occupational exposure occurs for the activity
for any worker in days per year; this field allows decimal values. A value of zero (0) entered
in this field will display an error. This is a required field.
• CBI: Check the ‘CBI’ checkbox to claim the maximum duration values as confidential.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
102

• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
3.8for more information regarding the save functionality in an expandable/collapsible field
set.
Exhibit 4-26 shows a screen capture of the ‘Occupational Exposures’ screen (Joint Submission):
Exhibit 4-26: Occupational Exposures Screen (Joint Submission)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
103

Navigation: Click the ‘Next’ button to navigate to the ‘Environmental Releases’ screen. You can
also access this screen by clicking the ‘Environmental Releases’ link within the navigation tree.
4.1.19

Environmental Releases

You can navigate to the ‘Environmental Releases’ screen by clicking the ‘Next’ button from the
‘Occupational Exposures’ screen. You can also access this screen by clicking the ‘Environmental
Releases’ link within the navigation tree.
The ‘Environmental Releases’ screen captures information about the environmental release and
disposal status of a particular site. The information on exposure and environmental release is
related to the flow diagram/process description on the ‘Submitter Operation Information’ screen.
This page is duplicated and populated for each flow diagram supplied in the PMN
(manufacturing, each processing description, and any use diagrams). The information provided
should focus on the PMN substance. EPA reviewers pay particular attention to human exposure
and environmental release date under their TSCA mandate to protect against unreasonable risks
from new chemical substances. In the absence of this information, EPA will make its own
estimates of worker exposure and environmental release, which are usually conservative. You
should present data that is accurate and as complete as possible.
The page displays an ‘Add’ button to add an expandable/collapsible field set to enter
‘Environmental Release and Disposal – Submitter Controlled Sites’ information. The page
displays fields to enter information for ‘Release Number,’ the amount of the new substance
released ‘to environment’ and the amount of new substance released ‘to control technology,’
‘Media of Release,’ ‘Control Technology Description,’ and ‘Release after Control Technology.’
You will be asked to enter information concerning the release to water, such as Publicly Owned
Treatment Works (POTW), navigable waterways, and others.
• Add: Click the ‘Add’ button to generate the ‘Environmental Release and Disposal –
Submitter Controlled Sites’ expandable/collapsible field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and remove the field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion. The ‘Delete’ icon ( ) displays when the user clicks the ‘Add’ button.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Release Number (1): Enter the number of each release point identified in the process
description on the ‘Submitter Operation Information’ screen. This is a required field.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
104

• CBI: Check the ‘CBI’ checkbox to claim the release number information as confidential.
• Amount of new substance released to Environment (2a): Select the applicable radio
button and enter the amount of new substance released to environment. Release estimates
should be consistent with the release levels shown on the preceding flow diagram on the
‘Submitter Operation Information’ screen. Include intermittent release estimates from
cleaning of equipment and transportation containers, even if cleaned off-site. Either the
‘Amount of new substance released to Environment’ or the ‘Amount of new substance
released to Control Technology’ field should be populated.
• Amount of new substance released to Environment kg/day: Select the radio button to
claim that the amount of new substance released to the environment is measured in kilograms
per day.
• Amount of new substance released to Environment kg/batch: Select the radio button to
claim that the amount of new substance released to the environment is measured in kilograms
per batch.
• Amount of new substance released to Control Technology (2b): Enter the amount of new
substance released to control technology. Release estimates should be consistent with the
release levels shown on the proceeding flow diagram on the ‘Submitter Operation
Information’ screen. Include intermittent release estimates from cleaning of equipment and
transportation containers, even if cleaned off-site. Either the ‘Amount of new substance
released to environment’ or the ‘Amount of new substance released to Control Technology’
field should be populated.
• Amount of new substance released to Control Technology kg/day: Select the radio button
to claim that the amount of new substance released to control technology is measured in
kilograms per day.
• Amount of new substance released to Control Technology kg/batch: Select the radio
button to claim that the amount of new substance released to control technology is measured
in kilograms per batch.
• Media of Release (4): Identify the media of release (i.e., stack air, fugitive air, surface water,
on-site or off-site land or incineration, POTW, or other (please specify)) to which the new
substance will be released from that release point from the drop-down menu. This is a
required field.
• CBI: Check the ‘CBI’ checkbox to claim the media of release as confidential.
• If Other, specify: Enter the other media of release when you select ‘Other’ from the ‘Media
of Release’ drop-down menu.
• Control Technology Description (5a): Enter the control technology description. Describe
control technology, if any, and control efficiency used to limit the release of the new
substance to the environment. For releases disposed of on land, characterize the disposal
method and state whether it is approved for disposal of Resource Conservation and Recovery
Act (RCRA) hazardous waste. For each site, describe any additional disposal methods that
will be used and whether the waste is subject to secondary or tertiary on-site treatment.
Indicate if you want this information to bind. Check the ‘CBI’ checkbox if the information is
confidential. This is a required field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
105

• Binding: Check the ‘Binding’ checkbox to claim the control technology description as
binding.
• Release after Control Technology (5b): Enter the release after control technology. Estimate
the amount released to the environment after control technology (in kilograms per day). This
is a required field.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality in
an expandable/collapsible field set.
• POTW Name: Enter the POTW (publicly owned treatment works) name.
• POTW NPDES #: Enter the POTW National Pollutant Discharge Elimination System
(NPDES) number.
• POTW CBI: Check the ‘CBI’ checkbox to claim the POTW as confidential.
• Navigable Waterway Name: Enter the navigable waterway name.
• Navigable Waterway NPDES #: Enter the navigable waterway NPDES number.
• Navigable Waterway CBI: Check the ‘CBI’ checkbox to claim the navigable waterway as
confidential.
• Other (Specify) Name: Enter the name of the other destination of release to water.
• Other (Specify) CBI: Check the ‘CBI’ checkbox to claim the other destination of release to
water as confidential.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
106

Exhibit 4-27 shows a screen capture of the ‘Environmental Releases’ screen (Joint Submission):
Exhibit 4-27: Environmental Releases Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Industrial Sites Controlled By Others’
screen. You can also access this screen by clicking the ‘Industrial Sites Controlled By Others’
link within the navigation tree. Click the ‘Add Operation’ link under the ‘Operations Controlled

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
107

By Others’ folder within the navigation tree to generate the screens for an operation controlled
by others.
4.1.20

Industrial Sites Controlled By Others

Click the ‘Add Operation’ link under the ‘Operations Controlled By Others’ folder within the
navigation tree to generate the screens for an operation controlled by others. You can navigate to
this screen by clicking the ‘Next’ button from the ‘Environmental Releases’ screen. You can also
access this screen by clicking the ‘Industrial Sites Controlled By Others’ link within the
navigation tree under the ‘Operations Controlled by Others’ folder.
The ‘Industrial Sites Controlled By Others’ screen captures information about activities
occurring at a particular site or group of sites. You will be able to enter an operation alias to
identify the operation. Importers are not required to complete this section for operations outside
the U.S.; however, any industrial processing or use operation that takes place after import must
be described.
You will first be asked to select the site(s) and chemical(s) for the operation. You will then
proceed to the next screen to enter resources concerning the operation. The system provides a
field to add an operation process description.
The site(s) and chemical(s) for the operation must be identified. The system then navigates to the
next screen to enter resources concerning the operation. The ‘Industrial Sites Controlled By
Others’ screen also displays a field to add an operation process description. In the operation
description, include the following information: (1) Diagram the major unit operation steps and
chemical conversions, including interim storage and specify transport containers (e.g., 5-gallon
pails, 55-gallon drums, rail cars, tank trucks, etc.). On the diagram, identify by letter and briefly
describe each worker activity. (2) Either in the diagram or in the text field, provide the identity,
the approximate weight (by kg/day or kg/batch, on a 100% new chemical substance basis), and
entry point of all feedstocks (including reactants, solvents and catalysts, etc.), products, recycle
streams, and wastes. Include cleaning chemicals (note frequency if not used daily or per batch).
(3) Either in the diagram or in the text field, identify by number the points of release, including
small or intermittent releases, to the environment of the new chemical substance.
• Operation Alias: Enter the operation alias. This is a required field if the form is pending a
Joint Submission or a Letter of Support.
• Add Facility: Click the button to generate the ‘Add Facility’ pop-up window and select a site
from the drop-down menu to add to the ‘Industrial Sites Controlled By Others’ screen. Refer
to Section Error! Reference source not found. for additional details regarding the add facility
functionality.
• Site Name: Displays the site name.
• Address: Displays the site address.
• City: Displays the site city.
• State: Displays the site state.
• Postal Code: Displays the site postal code.
• CBI: Indicates the CBI status of the site by displaying either a ‘Y’ or an ‘N.’
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
108

• Actions: Click the ‘Delete’ icon ( ) to delete a site from the table. A warning message
confirming deletion of the site displays.
• Select the chemical(s) that this submission pertains to: Displays all consolidated
chemicals in a PMN form.
• Operation Description: Enter the operation process description. Cover the following items:
(1) Diagram the major unit operation steps and chemical conversions, including interim
storage and transport containers (specify – e.g., 5-gallon pails, 55-gallon drums, rail cars,
tank trucks, etc.). On the diagram, identify by letter and briefly describe each worker activity.
(2) Either in the diagram or in the text field, provide the identity, the approximate weight (by
kg/day or kg/batch, on a 100% new chemical substance basis), entry point of all feedstocks
(including reactants, solvents and catalysts, etc.), all products, recycle streams, and wastes.
Include cleaning chemicals (note frequency if not used daily or per batch). (3) Either in the
diagram or in the text field, identify by number the points of release, including small or
intermittent releases, to the environment of the new chemical substance. Either this field is
required or a document must be attached.
• CBI: Check the ‘CBI’ checkbox to claim the operation description as confidential.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the document that was uploaded on
the ‘Attach Documents’ pop-up window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm deletion of the document.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
109

Exhibit 4-28 shows a screen capture of the ‘Industrial Sites Controlled By Others’ screen (Joint
Submission):
Exhibit 4-28: Industrial Sites Controlled By Others Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Exposures/Releases’ screen. You can
also access this screen by clicking the ‘Exposures/Releases’ link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
110

4.1.21

Exposures/Releases

You can navigate to the ‘Exposures/Releases’ screen by clicking the ‘Next’ button from the
‘Industrial Sites Controlled By Others’ screen. You can also access this screen by clicking the
‘Exposures/Releases’ link within the navigation tree under the ‘Operations Controlled By
Others’ folder.
The screen provides buttons to add expandable/collapsible field sets for worker exposure release
information and environmental disposal information. The screen displays fields in the worker
exposure expandable/collapsible field set to enter information for ‘Letter of Activity (1),’ ‘#
Workers Exposed (2),’ ‘Duration of Exposure Hours/Day (4a),’ ‘Duration of Exposure
Days/Year (4b),’ ‘Protective Equipment/Engineering Controls (6),’ ‘Physical Form (6),’ ‘% New
Substance (6),’ and ‘% in Formulation (7).’ The screen displays fields in the environmental
release expandable/collapsible field set to enter information for ‘Release Number (9),’ the
amount of the new substance released directly ‘to environment (10a),’ the amount of new
substance released ‘into control technology (10b),’ ‘Media of Release (12),’ and ‘Control
Technology (12).’
Information entered into the ‘Duration of Exposure Hours/Day (4a)’ and ‘Duration of Exposure
Days/Year (4b)’ fields must be a positive whole number or decimal. The system does not allow
special characters to be saved in these fields. If further explanation is required regarding duration
of exposure, please provide this in an attachment.
• Add: Click the ‘Add’ button to generate the ‘Worker Exposure’ expandable/collapsible field
set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Letter of Activity (1): Indicate the activities in which workers may be exposed to the
specified substance.
• CBI: Check the ‘CBI’ checkbox to claim the letter of activity as confidential.
• # Workers Exposed (2): Enter an estimate of the number of workers exposed for all sites
combined.
• CBI: Check the ‘CBI’ checkbox to claim the number of workers exposed as confidential.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
111

• Duration of Exposure Hours/Day (4a): Enter an estimate of the typical duration of
exposure per worker in hours/day. This field allows decimal values.
• Duration of Exposure Days/Year (4b): Enter an estimate of the typical duration of
exposure per worker in days/year. This field allows decimal values.
• CBI: Check the ‘CBI’ checkbox to claim the duration of exposure hours/day and days/year
as confidential.
• Protective Equipment/Engineering Controls (6): Enter a description of any protective
equipment and engineering controls, if any, used to protect workers. Please pay particular
attention to the information within if this field is populated via XML file. The information
contained within the ‘Protective Equipment/Engineering Controls/Physical Forms’ field in
the thick client separates into two (2) separate fields, the ‘Protective Equipment/Engineering
Controls’ and ‘Physical Forms’ field when these fields are populated via an XML file
generated from the ePMN thick client.
• CBI: Check the ‘CBI’ checkbox to claim the protective equipment/engineering controls
information as confidential.
• Physical Form (6): Enter a description of physical forms of exposure. Please pay particular
attention to the information populated in this field if this field is populated via XML file. The
information contained within the ‘Protective Equipment/Engineering Controls/Physical
forms’ field in the thick client separates into two (2) separate fields, the ‘Protective
Equipment/Engineering Controls’ and ‘Physical Forms’ field when these fields are populated
via an XML file generated from the ePMN thick client.
• % New Substance (6): Describe percentage of new chemical substance (if in mixture).
• % in Formulation (7): Estimate the percent of the new substance as formulated when
packaged or used as a final product.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality in
an expandable/collapsible field set.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
112

Exhibit 4-29 shows a screen capture of the ‘Exposures/Releases’ screen (Joint Submission)
(Scroll 1):
Exhibit 4-29: Exposures/Releases Screen (Joint Submission) (Scroll 1)

• Add: Click the ‘Add’ button to generate the ‘Environmental Disposal’
expandable/collapsible field set.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
113

• Release Number (9): Enter the number of each release point from the process diagram
previously entered.
• CBI: Check the ‘CBI’ checkbox to claim the release number information as confidential.
• Amt New Substance Released Directly into Environment (10a): Enter an estimate of the
amount of the new substance released directly to the environment in Kg/day or Kg/batch.
• Amt New Substance Released Directly into Environment Kg/Day: Select the ‘Kg/Day’
radio button to indicate that the amount of substance released into environment measures in
kilograms per day.
• Amt New Substance Released Directly into Environment Kg/Batch: Select the
‘Kg/Batch’ radio button to indicate that the amount of substance released into environment
measures in kilograms per batch.
• Amt New Substance Released Directly into Control Technology (10b): Estimate the
amount of the new substance released into control technology in Kg/Day or Kg/Batch.
• Amt New Substance Released Directly into Control Technology Kg/Day: Select the
‘Kg/Day’ radio button to indicate that the amount of substance released into control
technology measures in kilograms per day.
• Amt New Substance Released Directly into Control Technology Kg/Batch: Select the
‘Kg/Batch’ radio button to indicate that the amount of substance released into control
technology measures in kilograms per batch.
• Media of Release (12): Select a value from the drop-down menu to capture the media of
release. The ‘Media of Release’ drop-down menu contains the following values: ‘Fugitive
Air,’ ‘Off-Site Incineration,’ ‘On-site Incineration,’ ‘On-site WWT,’ ‘POTW,’ ‘Stack Air,’
‘Surface Water,’ and ‘Other,’ that will be used to limit the release of the new substance to the
environment. Please pay particular attention to the information within if this field is
populated via XML file. The information contained within the ‘Media of Release & Control
Technology’ field in the thick client separates into two (2) separate fields, the ‘Media of
Release’ drop-down menu and ‘Control Technology’ field when these fields are populated
via an XML file generated from the ePMN thick client.
• If Other, specify: Enter the other media of release.
• CBI: Check the ‘CBI’ checkbox to claim the media of release as confidential.
• Control Technology (12): Enter the control technology, if any, which will be used to limit
the release of the new substance to the environment. Please pay particular attention to the
information within if this field is populated via XML file. The information contained within
the ‘Media of Release & Control Technology’ field in the thick client separates into two (2)
separate fields, the ‘Media of Release’ drop-down menu and ‘Control Technology’ field
when these fields are populated via an XML file generated from the ePMN thick client.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality in
an expandable/collapsible field set.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
114

Exhibit 4-30 shows a screen capture of the ‘Exposures/Releases’ screen (Joint Submission)
(Scroll 2):
Exhibit 4-30: Exposures/Releases Screen (Joint Submission) (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Byproduct Information’ screen. You can
also access this screen by clicking the ‘Byproduct Information’ link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
115

4.1.22

Byproduct Information

You can navigate to the ‘Byproduct Information’ screen by clicking the ‘Next’ button from the
‘Exposures/Releases’ screen. You can also access this screen by clicking the ‘Byproduct
Information’ link under the ‘Operations Controlled By Others’ folder within the navigation tree.
The ‘Byproduct Information’ screen captures byproducts resulting from a particular site. The
system displays fields to enter byproducts.
Note that in IE 7, the right side of the ‘Byproduct’ text box may be cut off.
• CBI: Check the ‘CBI’ checkbox to claim all byproducts as confidential.
• Byproduct: Enter byproducts that may result from the operation.
• Actions: Click the ‘Save’ icon ( ) to save an entered byproduct. Click the ‘Delete’ icon ( )
to delete a byproduct. Click the ‘Add’ icon ( ) to add a byproduct. Click the ‘Form’ icon (
) to edit a saved byproduct.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
116

Exhibit 4-31 shows a screen capture of the ‘Byproduct Information’ screen (Joint Submission):
Exhibit 4-31: Byproduct Information Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Optional Pollution Prevention’ screen.
You can also access this screen by clicking the ‘Optional Pollution Prevention’ link within the
navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
117

4.1.23

Optional Pollution Prevention

You can navigate to the ‘Optional Pollution Prevention’ screen by clicking the ‘Next’ button
from the ‘Byproduct Information’ screen. You can also access this screen by clicking the
‘Optional Pollution Prevention’ link within the navigation tree.
The ‘Optional Pollution Prevention’ screen provides fields for companies to enter data about
their pollution prevention efforts. The company has the option of entering information as a free
text field or as an attachment. The company can claim the information as confidential by
checking the ‘CBI’ checkbox.
The system allows an uploaded document to be claimed as CBI. If a document is claimed as
CBI, the system requires the sanitized version of the attached document to be uploaded. To
access or edit previously attached documents, click the appropriate file name of the document
within the ‘File Name’ column of the document table.
The attachment table displays the file name and file extension of the document, the document
description, the number of pages the document contains, and the CBI status of the document.
Click the ‘Delete’ icon ( ) located within the ‘Actions’ column to delete unwanted documents.
You may provide information not reported elsewhere in this form regarding your efforts to
reduce or minimize potential risks associated with activities surrounding manufacturing,
processing, use, and disposal of the PMN substance on the ‘Optional Pollution Prevention’
screen. Include new information pertinent to pollution prevention, including source reduction,
recycling activities and safer processes or products available due to the new chemical substance.
Source reduction includes the reduction in the amount or toxicity of chemical wastes by
technological modification, process and procedure modification, product reformulation, and/or
raw materials substitution. Recycling refers to the reclamation of useful chemical components
from wastes that would otherwise be treated or released as air emissions or water discharges, or
land disposal. Quantitative or qualitative descriptions of pollution prevention, source reduction
and recycling should emphasize potential risk reduction in addition to compliance with existing
regulatory requirements. EPA is interested in the information to assess overall net reductions in
toxicity or environmental releases and exposures, not the shifting of risks to other media (e.g., air
to water) or non-environmental areas (e.g., occupational or consumer exposure). To the extent
known, information about the technology being replaced will assist EPA in its relative risk
determination. In addition, information on the relative cost or performance characteristics of the
PMN substance to potential alternatives may be provided.
Describe the expected net benefits, such as:
(1) An overall reduction in risk to human health or the environment;
(2) A reduction in the generation of waste materials through recycling, source reduction or
other means;
(3) A reduction in the use of hazardous starting materials, reagents, or feedstocks;
(4) A reduction in potential toxicity, human exposure and/or environmental release; or
(5) The extent to which the new chemical substance may be a substitute for an existing
substance that poses a greater overall risk to human health or the environment.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
118

EPA strongly encourages submitters to provide pollution prevention data in their notices, as this
information assists the Agency in balancing the benefits of a PMN substance against its unique
risks.
While Agency staffers frequently receive information on the benefits of the PMN substance with
respect to its use(s), data on pollution prevention effects are rarely included. This section should
be utilized to indicate to EPA benefits in terms of the raw materials incorporated, the
manufacturing process, emission reductions, less toxic waste byproducts, or lower risks upon end
use and disposal. You should consider the entire life cycle of the PMN substance in your
evaluation.
Also consider opportunities for product stewardship or other risk management controls that could
significantly reduce risk characteristics of the new substance (e.g., disposal techniques that can
be easily implemented and substantially reduce waste toxicity).
Initiatives in the New Chemicals Program such as Environmental Technology Initiative (ETI) for
Chemicals, and the Pollution Prevention Recognition Project, are geared towards incorporating
this type of information into the Agency’s risk management decision making and recognizing
innovative chemical design or technological innovation that shows potential for environmental
and human health benefits.
Describe any pollution prevention benefits here, and indicate if this information is confidential
business information. Attempt to quantify the expected benefits to the extent possible and avoid
exaggeration and highly speculative statements. The following questions can be used to assess
pollution prevention benefits:
(1) Are there pollution prevention benefits associated with the new PMN chemical?
(2) Does it allow reduction of elimination of (more) toxic solvents?
(3) Does it reduce disposal to land, or in safer forms, compared to the chemistry it replaces?
(4) Can it be recycled more easily than existing materials?
(5) Does your manufacturing process eliminate or reduce the use/release of hazardous
substances?
• Please click here to review additional information that should be included on this page:
Click the link to display additional information regarding the pollution information.
• Check here to claim this information as CBI: Check the ‘Check here to claim this
information as CBI’ checkbox to claim the pollution prevention information as confidential.
• Optional Pollution Prevention text box: Enter information about pollution prevention in
this field.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of a document that is uploaded on the
‘Attach Documents’ pop-up window. Click the file name link to navigate to the ‘Attach
Documents’ pop-up window to make any edits to an attached document.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
119

• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.

Exhibit 4-32 shows a screen capture of the ‘Optional Pollution Prevention’ screen (Joint
Submission):
Exhibit 4-32: Optional Pollution Prevention Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Additional Attachments’ screen. You can
also access this screen by clicking the ‘Additional Attachments’ link within the navigation tree.
4.1.24

Additional Attachments

You can navigate to the ‘Additional Attachments’ screen by clicking the ‘Next’ button from the
‘Optional Pollution Prevention’ screen. You can also access this screen by clicking the
‘Additional Attachments’ link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
120

The ‘Additional Attachments’ screen provides a table for you to add additional attachments that
have not been incorporated into the form. This screen allows documents that did not have a
suitable place in the application to be uploaded.
• Please click here to view a list of commonly attached documents and where they should
be attached: Clicking the link displays a list of documents and where they should be
attached.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section 3.9 for further information regarding the attach document
functionality.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window.
• Description: Displays the description associated with a document.
• Pages: Displays the number of pages a document contains.
• Date: Displays the date a document was uploaded.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
• Action: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
121

Exhibit 4-33 shows a screen capture of the ‘Additional Attachments’ screen (Joint Submission):
Exhibit 4-33: Additional Attachments Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Attachment Summary’ screen. You can
also access this screen by clicking the ‘Attachment Summary’ link within the navigation tree.
4.1.25

Attachment Summary

You can navigate to the ‘Attachment Summary’ screen by clicking the ‘Next’ button from the
‘Additional Attachments’ screen. You can also access this screen by clicking the ‘Attachment
Summary’ link within the navigation tree.
The ‘Attachment Summary’ screen displays a summary of the documents attached to the PMN
form. The attachment table displays the section of the form a document is associated with, file
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
122

name and file extension of a document, the document description, number of pages in a
document, date attached, and whether the document is CBI.
• Section: Displays the section of the PMN form that the attached document is associated.
• File Name: Displays the file name and file extension of a document that is uploaded on the
‘Attach Documents’ pop-up window.
• Description: Displays the description of a document that was uploaded on the ‘Attach
Documents’ pop-up window.
• Pages: Displays the number of pages a document contains.
• Date: Displays the upload date of a document that was uploaded on the ‘Attach Documents’
pop-up window.
• CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’
Exhibit 4-34 shows a screen capture of the ‘Attachment Summary’ screen (Joint Submission):

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
123

Exhibit 4-34: Attachment Summary Screen (Joint Submission)

Navigation: Click the ‘Next’ button to navigate to the ‘Optional Cover Letter’ screen. You can
also access this screen by clicking the ‘Optional Cover Letter’ link within the navigation tree.
4.1.26

Optional Cover Letter

You can navigate to the ‘Optional Cover Letter’ screen by clicking the ‘Next’ button from the
‘Attachment Summary’ screen. You can also access this screen by clicking the ‘Optional Cover
Letter’ link within the navigation tree.
The ‘Optional Cover Letter’ screen is used to communicate information with EPA that is not
collected elsewhere in the form. The cover letter is used to give OPPT resources and special
instructions regarding the application.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
124

• Click here to claim this information as CBI: Check the ‘Click here to claim this
information as CBI’ checkbox to claim the information as confidential.
• Optional Cover Letter: Enter the description and any additional special instructions
regarding the form.

Exhibit 4-35 shows a screen capture of the ‘Optional Cover Letter’ screen (Joint Submission):

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
125

Exhibit 4-35: Optional Cover Letter Screen (Joint Submission)

Navigation: Click the ‘Validate’ icon ( ) located in the bottom action bar to validate the form.
Click the ‘Save’ icon ( ) located in the bottom action bar to save the overall form. Click the
‘Preview’ icon ( ) located in the bottom action bar to view a PDF preview of the form. Click
the ‘Submit’ ( ) icon located in the bottom action bar to begin the submission process.
4.1.27

Upload XML

You can access the ‘Upload XML’ screen by clicking the ‘Upload XML’ button within the
lower-left side of the bottom action bar.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
126

The ‘Upload XML’ screen is used to upload a PMN XML file (created from the PMN thick
client with a file type of .pmn_tsca or the ZIP file generated from a CoR) into a current joint
PMN form for joint PMN forms with numerous chemicals. You also have the option to export a
current joint PMN form into an XML file using the ‘Export XML’ link. The upload XML
functionality is only available for a PMN form.
If you upload an XML file into a pre-populated form, the XML file overwrites the contents of the
pre-populated form. In addition, uploading any file removes the attached documents within a
form, which must be re-attached. You must also add any sites identified within the form to your
CDX registration profile.
After uploading a file, click the ‘Preview’ icon ( ) located in the bottom action bar to view a
PDF preview of the form ensuring that all the data has populated correctly and any other
information is displayed accurately. In particular, ensure that the ‘Letter of Activity (1),’
‘Protective Equipment/Engineering Controls,’ ‘Physical Form,’ ‘Media of Release,’ ‘Control
Technology,’ and ‘% New Substance’ fields of entry have been populated correctly.
Please note that in IE 7, if an upload fails, the action bar at the bottom of the screen might be
misaligned when the ‘Upload XML’ screen reloads.
• Upload archive file: Click the button to generate the ‘File Upload’ window to search for the
ZIP copy of record archive file populated with PMN information. The copy of record archive
file must contain the XML form in a file labeled ‘formdata.xml.’ The application processes
the ZIP copy of record archive file and displays any applicable error messages.
• Export XML: Click the button to generate the XML file of the current PMN form that a user
can download.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
127

Exhibit 4-36 shows a screen capture of the ‘Upload XML’ screen:
Exhibit 4-36: Upload XML Screen

Navigation: Click the ‘Validate’ icon ( ) located in the bottom action bar to validate the form.
Click the ‘Save’ icon ( ) located in the bottom action bar to perform a global save on the form.
Click the ‘Preview’ icon ( ) located in the bottom action bar to view a PDF preview of the
form. Click the ‘Submit’ icon ( ) located in the bottom action bar to begin the submission
process.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
128

Biotechnology Secondary User

5.1

Joint and Letter of Support Process

The Biotechnology form is used to collect information about “intergeneric” microorganisms that
will be manufactured or imported into the United States. EPA collects the information provided
in a Biotechnology form through a free text box and attachments. The Biotechnology form does
not have a structured data format, but there are several types of Biotechnology notices that can
be filed. The different types are as follows: Microbial Commercial Activity Notice (MCAN),
TSCA Experimental Release Application (TERA), Tier I Exemption, Tier II Exemption, and
Biotechnology Test Market Exemption (TME) forms. All the forms have the same upload
requirements and EPA will retain responsibility for verifying the correct information is received.
The Biotechnology Joint and/or Letter of Support process will be a multi-step process with
coordination required between the Primary, Joint, and/or Letter of Support submitters. The
Primary user would first state that a Joint Submission and/or Letter of Support would supplement
the application on the ‘General Form Information’ screen. Based on the selection, the ‘Joint
Submission’ and/or ‘Letter of Support’ folder will populate. Each folder will contain a section
for you to enter contact information, field information, and instruction information with the
secondary user’s unique identification number. The Primary submitter may identify up to two
Joint Submissions and an unlimited number of Letters of Support.
When the Primary user enters the relevant Joint Submission and/or Letter of Support folder, the
Primary user will be asked to enter contact information for the Joint and/or Letter of Support
submitter on the first screen. The Primary user will use the email address entered on this screen
will be used to send the Joint and/or Letter of Support Submitter the unique identifier. The
second screen in the Joint and/or Letter of Support folder will display the unique ID that will be
sent to the Secondary use at and a text box for the Primary user to provide the Secondary user
instructions or information about what is to be filed. The Secondary user will not be sent the
information that the Primary user captured or be able to access the Joint and/or Letter of Support
form until the Primary AO has submitted the original Biotechnology form.
The secondary submitter will register in CDX as a Secondary AO and access the Section 5
Notices and Supports application. Once you arrive at the ‘Section 5 Notices and Supports Forms’
screen, click the ‘Start New Form’ button and enter in the unique identifier on the ‘Enter
Passphrase’ screen sent via email by the Primary user which will generate the appropriate form
that the secondary submitter will be populating. The unique ID will link the primary and joint
forms on the backend. The joint form will contain the same screens listed for the primary
Biotechnology form, except the Joint submitter will not be supplied the ‘Joint Folder.’ All
screens will be identical with regards to requirements and view with the exception of the
‘Section 5 Notices and Supports Forms’ screen and the ‘General Form Information’ screen,
which are listed below. The secondary submission process will also be identical to the primary
submission.
5.1.1

General Form Information

You can access the ‘General Form Information’ screen by creating a passphrase in the ‘Create
Passphrase’ screen or by entering a passphrase in the ‘Enter Passphrase’ screen.
The ‘General Form Information’ screen presents a list of text fields and drop-down menus for
you to input identifying information for the specific form. You will have the option to assign a
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
129

‘Form Alias’ to help you identify the form. A form alias is helpful when a user or company has
multiple forms and/or when you must differentiate between forms to the help desk. Upon
navigating to the ‘General Form Information’ screen, the system auto-generates a default alias in
the following format: .
The TS number must be a six (6) character alphanumeric combination and should include two
(2), three (3), or four (4) letters. Company names, recognizable words, and numerical series are
not recommended.
The ‘Text/Comments’ text box captures information regarding the submission/attachment. A
‘CBI’ checkbox displays above the ‘Text/Comments’ text box to claim the information as
confidential.
The ‘General Form Information’ screen displays the option to attach a document by clicking the
‘Attach Document’ button. For more information regarding the attach document functionality,
please refer to Section Error! Reference source not found..
•

•

•
•
•

•
•
•
•

Form Alias: Enter a custom form alias, if applicable. Upon navigating to the screen, the
system auto-generates an editable alias comprised of . This is a required field.
Type of Submission: Select the submission type from the drop-down menu. This dropdown menu contains the following values: ‘MCAN (Microbial Commercial Activity
Notice),’ ‘TERA (TSCA Experimental Release Application),’ ‘Tier I Exemption,’ ‘Tier
II Exemption,’ and ‘Biotechnology TME (Test Market Exemption).’
TS Number: Enter the TS number. The TS number can be any six (6) character
alphanumeric combination and should include two (2), three (3), or four (4) letters.
Company names, recognizable words, and numeric series are not recommended. This
field is required if ‘MCAN’ is selected from the ‘Type of Submission’ drop-down menu,
but is also required regardless of the submission type if a Letter of Support is pending,
and/or if a joint Biotechnology form is being filed.
Text/Comments: Enter a description of the form and/or attachment.
CBI: Check the ‘CBI’ checkbox to claim the ‘Text/Comments’ information as
confidential.
Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach
Documents’ pop-up window. Upload attachments including published literature,
regulations and certifications, ID data, construct data, effects data, MSDS, manufacturing
details, use details, inactivation data, and/or other types of documents. At least one
document is required even if a Letter of Support or Joint Submission is claimed. Please
refer to Section Error! Reference source not found. for additional details regarding the
attach document process.
File Name: Displays the file name and file extension of a document that is uploaded on
the ‘Attach Documents’ pop-up window.
Description: Displays the description of a document.
Pages: Displays the number of pages a document contains.
CBI: Indicates the CBI status of a document by displaying either a ‘Y’ or an ‘N.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
130

•

Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row
permanently from the system. A warning message displays to confirm the deletion.
Exhibit 5-1 shows a screen capture of the ‘General Form Information’ screen (Joint
Biotechnology):
Exhibit 5-1 General Form Information Screen (Joint Biotechnology)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
131

5.1.2

Technical Contact Information

You can access the ‘Technical Contact Information’ screen by clicking the ‘Next’ button from
the ‘General Form Information’ screen. You can also navigate to the ‘Technical Contact
Information’ screen by clicking the ‘Technical Contact Information’ link within the navigation
tree.
The ‘Technical Contact Information’ screen displays an ‘Add Technical Contact’ button. Click
the ‘Add Technical Contact’ button to generate an ‘Add Technical Contact’ pop-up window to
enter information into the text fields. Click the ‘Copy CDX Registration’ button to populate the
text fields using your CDX registration information. Check the ‘Check here to claim this
information as CBI’ checkbox to indicate that the information is confidential and will not be
released to the public.
• Add Technical Contact: Click the ‘Add Technical Contact’ button to generate the ‘Add
Technical Contact’ pop-up window.
• Last Name: Displays the technical contact’s last name.
• First Name: Displays the technical contact’s first name.
• Address: Displays the technical contact’s address.
• CBI: Indicates the CBI status of the reported technical contact information by displaying
either a ‘Y’ or an ‘N.’
• Actions: Click the ‘Delete’ icon ( ) to delete the technical contact information from the
table. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
132

Exhibit 5-2 shows a screen capture of the ‘Technical Contact Information’ screen (Joint
Biotechnology):
Exhibit 5-2: Technical Contact Information Screen (Joint Biotechnology)

Add Technical Contact

You can access the ‘Add Technical Contact’ pop-up window by clicking the ‘Add Technical
Contact’ button on the ‘Technical Contact Information’ screen.
• Copy CDX Registration: Click the ‘Copy CDX Registration’ button to copy your
information from CDX registration; a message displays confirming the import of CDX
registration information.
• Check here to claim this information as CBI: Check the ‘Check here to claim this
information as CBI’ checkbox to claim the technical contact information as confidential.
• First Name: Enter the technical contact’s first name. Click the ‘Copy CDX Registration’
button to populate the fields with information entered during CDX registration. This is a
required field.
• Last Name: Enter the technical contact’s last name. Click the ‘Copy CDX Registration’
button to populate the fields with information entered during CDX registration. This is a
required field.
• Position: Enter the technical contact’s job title.
• Company Name: Enter the technical contact’s company name. Click the ‘Copy CDX
Registration’ button to populate the fields with information entered during CDX registration.
This is a required field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
133

• Phone Number: Enter the technical contact’s daytime U.S. phone number; this must be at
least 10 characters long and does not accept dashes. Click the ‘Copy CDX Registration’
button to populate the fields with information entered during CDX registration. This is a
required field.
• Phone Extension: Enter the technical contact’s phone number extension if applicable.
• Email Address: Enter the technical contact’s email address. The email address must follow
the standard email address format: John.Doe@domain. Click the ‘Copy CDX Registration’
button to populate the fields with information entered during CDX registration.
• Mailing Address 1: Enter the first line of the technical contact’s mailing address. Click the
‘Copy CDX Registration’ button to populate the fields with information entered during CDX
registration. This is a required field.
• Mailing Address 2: Enter the second line of the technical contact’s mailing address. Click
the ‘Copy CDX Registration’ button to populate the fields with information entered during
CDX registration.
• City: Enter the city of the technical contact’s mailing address. Click the ‘Copy CDX
Registration’ button to populate the fields with information entered during CDX registration.
This is a required field.
• State: Select the state of the technical contact’s mailing address from the drop-down menu.
Click the ‘Copy CDX Registration’ button to populate the fields with information entered
during CDX registration. This is a required field.
• Postal Code: Enter the postal code of the technical contact’s mailing address. Click the
‘Copy CDX Registration’ button to populate the fields with information entered during CDX
registration. This is a required field.
• Country: Displays ‘United States.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
134

Exhibit 5-3 shows a screen capture of the ‘Add Technical Contact’ pop-up window:
Exhibit 5-3: Add Technical Contact Pop-Up Window

Navigation: Click the ‘Cancel’ button to stop populating technical contact information and
navigate back to the ‘Technical Contact Information’ screen. Click the ‘OK’ button to save and
populate the entered technical contact information and navigate back to the ‘Technical Contact
Information’ screen.
5.1.3

Optional Cover Letter

You can access the ‘Optional Cover Letter’ screen by clicking the ‘Next’ button from the
‘Technical Contact Information’ screen. You can also access this screen by clicking the
‘Optional Cover Letter’ link within the navigation tree.
The ‘Optional Cover Letter’ screen is used to communicate information to EPA not collected
elsewhere in the form. The cover letter is used to give OPPT resources and special instructions
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
135

regarding the application. The cover letter should be either fully CBI or non-CBI to eliminate
user error to promote transparency between the company and EPA.
• Check here to claim this information as CBI: Check the ‘Check here to claim this
information as CBI’ checkbox to claim the cover letter information as confidential.
• Optional Cover Letter: Enter the description and any additional special instructions
regarding the form.
Exhibit 5-4 shows a screen capture of the ‘Optional Cover Letter’ screen:
Exhibit 5-4: Optional Cover Letter Screen

Navigation: Click the ‘Validate’ icon ( ) located in the bottom action bar to validate the form.
Click the ‘Save’ icon ( ) located in the bottom action bar to perform a global save of the form.
Click the ‘Preview’ icon ( ) located in the bottom action bar to view a PDF preview of the
form. Click the ‘Submit’ ( ) icon located in the bottom action bar to begin the submission
process.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
136

Bona Fide Form Secondary User

The purpose of the Bona Fide module is to receive an official determination from EPA as to
whether a substance is on the TSCA inventory. Submitters may attempt to avoid submitting a
PMN by completing a Bona Fide form to establish that the chemical already exists on the
inventory. The Bona Fide process is covered in a thirty (30) day period.
6.1

Edit Bona Fide Form

To edit a Joint Bona Fide form, navigate to the ‘Section 5 Notices and Supports Forms’ screen
and select ‘Bona Fide’ from the ‘Form Type’ drop-down menu. Refer to Section 3.4 for
additional details regarding the ‘Section 5 Notices and Supports Forms’ screen.
Refer to Section 3.5 for additional details regarding the create passphrase process.
6.1.1

General Document Information

You can access the ‘General Document Information’ screen by entering the unique identification
number provided by the AO and creating a passphrase on the ‘Create Passphrase’ screen.
The ‘General Document Information’ screen presents text fields and checkboxes for you to input
identifying information for the specific form. You will have the option to assign a ‘Form Alias’
by which the form can be identified. The form alias is helpful when you or the company has
multiple forms and/or when a user must differentiate between forms to the help desk. If a form
alias is not entered, the system will provide a default alias comprised of a form type and date and
time stamp in the following format: .
You can claim the entirety of the form as CBI. The entire form will be claimed as CBI if you
check the ‘I claim the entirety of the submission as CBI’ checkbox. The entire form will be
considered non-CBI if you leave the ‘I claim the entirety of the submission as CBI’ checkbox
unchecked.
You can indicate that a technical contact will be identified by checking the ‘Technical Contact’
checkbox. The technical contact must possess sufficient knowledge to answer any questions EPA
may have about the chemical reported within the form. The application will generate a
‘Technical Contact Information’ screen when you check the ‘Technical Contact’ checkbox.
• Form Alias: Enter the form alias. Upon navigating to the screen, the screen auto-generates
an editable form alias comprised of .
This is a required field.
• I claim the entirety of the submission as CBI: Check the ‘I claim the entirety of the
submission as CBI’ checkbox to flag all data contained within the form as confidential
business information.
• Technical Contact: Check the ‘Technical Contact’ checkbox to generate a ‘Technical
Contact Information’ screen for you to enter contact information about the technical contact
associated with the reported chemical.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
137

Exhibit 6-1 shows a screen capture of the ‘General Document Information’ screen (Letter of
Support):
Exhibit 6-1: General Document Information Screen (Letter of Support)

Navigation: Click the ‘Next’ button to navigate to the ‘Primary Contact Information’ screen.
You can also access this screen by clicking the ‘Primary Contact Information’ link within the
navigation tree.
6.1.2

Primary Contact Information

You can access the ‘Primary Contact Information’ screen by clicking the ‘Next’ button from the
‘General Document Information’ screen. You can also access this screen by clicking the
‘Primary Contact Information’ link within the navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
138

The data fields on the ‘Primary Contact Information’ screen are pre-populated based on
information entered during CDX registration. All fields are editable allowing for necessary
updates. The ‘Job Title’ field on this screen is not pre-populated from CDX registration and is a
required field.
If you checked the ‘I claim the entirety of the submission as CBI’ checkbox on the ‘General
Document Information’ screen, all entered primary contact information is flagged as CBI.
The following fields are captured and displayed from the logged in user’s CDX registration
information:
•
•
•
•
•
•
•
•
•
•
•
•
•
•

•
•

Prefix: Select the primary contact’s prefix from the drop-down menu.
First Name: Enter the primary contact’s first name. This is a required field.
Middle Initial: Enter the primary contact’s middle initial.
Last Name: Enter the primary contact’s last name. This is a required field.
Suffix: Select the primary contact’s suffix from the drop-down menu.
Title: Enter the primary contact’s job title. This is a required field.
Company Name: Enter the primary contact’s company name. This is a required field.
Phone Number: Enter the primary contact’s daytime phone number; dashes are not
allowed. This is a required field.
Phone Extension: Enter the extension to the primary contact’s daytime phone number.
Email Address: Enter the primary contact’s email address. The email address must
follow the standard email address format: John.Doe@ABC.com. This is a required field.
Mailing Address 1: Enter the first line of the primary contact’s mailing address. This is a
required field.
Mailing Address 2: Enter the second line of the primary contact’s mailing address.
City: Enter the city of the primary contact’s mailing address. This is a required field.
State: Select the state of the primary contact’s mailing address from the drop-down
menu. The state field is required if the user selects ‘United States’ from the ‘Country’
drop-down menu.
Postal Code: Enter the postal code of the primary contact’s mailing address. This is a
required field.
Country: Select the country of the primary contact’s mailing address. This is a required
field.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
139

Exhibit 6-2 shows a screen capture of the ‘Primary Contact Information’ screen:
Exhibit 6-2: Primary Contact Information Screen

Navigation: Click the ‘Next’ button to navigate to the ‘Technical Contact Information’ screen if
you checked the ‘Technical Contact’ checkbox on the ‘General Document Information’ screen.
You can also access this screen by clicking the ‘Technical Contact Information’ link within the
navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
140

6.1.3

Technical Contact Information

If you indicated on the ‘General Document Information’ screen that technical contact
information will be provided, then you can navigate to the ‘Technical Contact Information’
screen by clicking the ‘Next’ button from the ‘Primary Contact Information’ screen. You can
also access this screen by clicking the ‘Technical Contact Information’ link within the navigation
tree.
The technical contact is a subject matter expert (SME) who is capable of answering questions
related to the chemical submitted to EPA within the Bona Fide form. The technical contact does
not have to work at the port or site reported on the form but must possess sufficient knowledge to
answer EPA’s questions pertaining to the chemical reported in the form.
The text fields on the ‘Technical Contact Information’ screen will be blank upon accessing the
screen. To add information, you will enter data into the blank text boxes for the listed text fields.
If you checked the ‘I claim the entirety of the submission as CBI’ checkbox on the ‘General
Document Information’ screen, all entered technical contact information will be flagged as CBI.
Please note that if you are using IE 7, there will be a spacing issue between the ‘Suffix’ dropdown menu and the ‘Title’ text field.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•

Prefix: Select the technical contact’s prefix from the drop-down menu.
First Name: Enter the technical contact’s first name. This is a required field.
Middle Initial: Enter the technical contact’s middle initial.
Last Name: Enter the technical contact’s last name. This is a required field.
Suffix: Select the technical contact’s suffix from the drop-down menu.
Title: Enter the technical contact’s job title.
Company Name: Enter the technical contact’s company name.
Phone Number: Enter the technical contact’s daytime U.S. phone number; dashes are
not allowed. This is a required field.
Phone Extension: Enter the technical contact’s phone number extension.
Email Address: Enter the technical contact’s email address. The email address must
follow the standard email address format: John.Doe@ABC.com. This is a required field.
Mailing Address 1: Enter the first line of the technical contact’s mailing address.
Mailing Address 2: Enter the second line of the technical contact’s mailing address.
City: Enter the city of the technical contact’s mailing address.
State: Select the state of the technical contact’s mailing address from the drop-down
menu.
Postal Code: Enter the postal code of the technical contact’s mailing address.
Country: Displays ‘United States.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
141

Exhibit 6-3 shows a screen capture of the ‘Technical Contact Information’ screen:
Exhibit 6-3: Technical Contact Information Screen

Navigation: Click the ‘Next’ button to navigate to the ‘Chemical Identification Information’
screen. You can also access this screen if you click the ‘Chemical Identification Information’
link within the navigation tree.
6.1.4

Chemical Identification Information

You can navigate to the ‘Chemical Identification Information’ screen by clicking the ‘Next’
button from the ‘Chemical Identification Information’ screen. You can also access this screen by
clicking the ‘Chemical Identification Information’ link within the navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
142

The ‘Chemical Identification Information’ screen identifies the type of chemical the submitter
will enter into the application. You will be able to file a Bona Fide form for a class 1 or
2/Biotechnology chemical substance or a polymer. Based on your selection, the appropriate
screens for the respective chemical will appear.
This screen also provides a text field for you to identify an alias for the chemical substance.
• Class 1 or 2/Biotechnology Chemical Substance: Select the ‘Class 1 or 2/Biotechnology
Chemical Substance’ radio button to indicate that the chemical is a class 1 or 2/biotechnology
substance. If you select the ‘Polymer’ radio button after initially selecting the ‘Class 1 or
2/Biotechnology Chemical Substance’ radio button, the application generates an error
message warning you that you will lose all data for this chemical if the chemical type
changes. The user is required to select one of the two radio button options displayed in the
‘Chemical Type’ section.
• Polymer: Select the ‘Polymer’ radio button to indicate that the chemical is a polymer. If you
select the ‘Class 1 or 2/Biotechnology Chemical Substance’ radio button after initially
selecting the ‘Polymer’ radio button, the application generates an error message warning you
that you will lose all data for this chemical if the chemical type changes. The user is required
to select one of the two radio button options displayed in the ‘Chemical Type’ section.
• Chemical Alias: Enter the chemical alias to associate with a chemical.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
143

Exhibit 6-4 shows a screen capture of the ‘Chemical Identification Information’ screen:
Exhibit 6-4: Chemical Identification Information Screen

Navigation: If you selected the ‘Class 1 or 2 Chemical Substance’ radio button, click the ‘Next’
button to navigate to the ‘Class 1 or 2 Chemical Substances’ screen. If you selected the
‘Polymer’ radio button, click the ‘Next’ button to navigate to the ‘Polymer Identification
Information’ screen.
6.1.5

Class 1 or 2/Biotechnology Chemical Substance

If you selected the ‘Class 1 or 2/Biotechnology Chemical Substance’ radio button, click the
‘Next’ button to navigate to the ‘Class 1 or 2/Biotechnology Chemical Substances’ screen.
The ‘Class 1 or 2/Biotechnology Chemical Substances’ screen provides fields for you to enter
information describing the chemical for the Bona Fide which is to be filed, including its name,
composition, and structure.
You can add a chemical component by clicking the ‘Add New Chemical’ button. Upon clicking
the ‘Add New Chemical’ button, an expandable/collapsible field set generates that contains
numerous fields to identify the chemical in question. You will be able to enter multiple chemical
substances, each with unique information, by clicking the ‘Add New Chemical’ button for each
chemical substance you wish to identify.
After the document(s) is/are attached and you have clicked the ‘OK’ button, the ‘Attach
Chemical Structure’ pop-up window closes and the document information will be displayed in a
table format on the ‘Class 1 or 2/Biotechnology Chemical Substances’ screen. The attachment
table displays the file name of the document and user-provided description of the document.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
144

Click the ‘Delete’ icon ( ) located under the ‘Actions’ column to delete unwanted documents.
Click the appropriate file name of the document within the ‘File Name’ column of the
attachment table to access or edit previously attached documents.
Please note that if you are using IE 7, part of the content on this screen displays behind the Bona
Fide navigation tree and certain fields on this screen may display twice.
• Add New Chemical: Click the button to generate the class 1 or 2/Biotechnology chemical
substances field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the expandable/collapsible
field set to modify the information entered in the fields. The ‘Edit’ link displays when the
expandable/collapsible field set has been saved and the data is not currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Class of Substance: In the section, ‘Class of Substance,’ you identify whether a ‘Class 1’ or
‘Class 2/Biotechnology’ chemical substance is being reported. When you select the ‘Class
2/Biotechnology’ chemical substance radio button, you are indicating that some portions of the
structure may not be known and an additional screen will appear within the navigation tree that
provides fields for you to enter information concerning how the chemical was created. If
multiple class 2 chemical substances are added, one ‘Class 2/Biotechnology Substances’ screen
will apply to all chemical substances.
• Add Chemical ID: You can access the ‘Add Chemical ID’ pop-up window by clicking the
‘Add Chemical ID’ button within the ‘Chemical Identification Information’ field set. You can
search for the reported chemical(s) either by the ‘CASRN’ or ‘CA Index Name or Other
Synonym.’ If you retrieve zero results, the system provides fields for you to enter the chemical
information by filling in the ‘Chemical Name’ and the ‘Chemical Abstract Services Registry
Number’ under the manual entry field set. The system provides functionality to enter the
selected chemical by clicking the ‘OK’ button located at the bottom of the ‘Add Chemical ID’
window. Refer to Section Error! Reference source not found. for additional details regarding
the search SRS functionality.
• Chemical Name: The system provides fields for you to identify the ‘Chemical Name’ and the
‘CASRN’ (if available). The system provides functionality for you to search for the chemical
substance using the ‘Add Chemical ID’ search or manually enter the chemical information in
the ‘Add Chemical ID’ pop up.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
145

• ID Method: The system shall require that you identify which ID method was used to
determine the chemical identity. If you select ‘Method 1,’ you are required to attach an IES
report. You can also select ‘Method 2 (Other Method).’
• Attach IES Report: To access the ‘Attach IES Report’ pop-up window, click the ‘Attach IES
Report’ button that displays within the ‘Chemical Identification Information’ field set. After
you attach the document(s), and click the ‘OK’ button, the ‘Attach IES Report’ pop-up window
closes and the document information displays in a table format on the ‘Class 1 or
2/Biotechnology Chemical Substances’ screen. The document attachment table displays the file
name of the document(s) and the user-provided description of the document(s). Click the
‘Delete’ icon ( ) located under the ‘Actions’ column to delete unwanted documents. Click the
file name link under the ‘File Name’ column to access or edit previously attached documents.
• Molecular Formula: Enter a molecular formula in a text field using a free text format. This
field is optional.
• Chemical Structure Diagram: The system allows you to attach a chemical structure diagram.
This field is optional.
• Attach Chemical Structure: Click the ‘Attach Chemical Structure’ button within the
‘Chemical Identification Information’ field set to access the ‘Attach Chemical Structure’ popup window. You can attach the file(s) and enter a description of the document regarding the
chemical structure.
• File Name: Displays the file name and file extension of the file that is uploaded on the ‘Attach
Chemical Structure’ window.
• Description: Displays the description of the chemical structure.
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached chemical structure row
permanently from the system. A warning message displays to confirm the deletion of the
document.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom action
bar to successfully save the entered information within the field set before being able to
navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality in
an expandable/collapsible field set.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
146

Exhibit 6-5 shows a screen capture of the ‘Class 1 or 2/Biotechnology Chemical Substances’
screen (Joint Bona Fide):
Exhibit 6-5: Class 1 or 2/Biotechnology Chemical Substances Screen (Joint Bona Fide)

Navigation: If you selected the ‘Class 1’ radio button and clicked the ‘Save’ button within the
expandable/collapsible field set, click the ‘Next’ button to navigate to the ‘Use Information’
screen. You can also access this screen by clicking the ‘Use Information’ link within the
navigation tree. If you selected the ‘Class 2/Biotechnology’ radio button and clicked the ‘Save’
button within the expandable/collapsible field set, then click the ‘Next’ button to navigate to the
‘Class 2 Substances’ screen. You can also access this screen by clicking the ‘Class 2 Substances’
link within the navigation tree.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
147

6.1.6

Class 2/Biotechnology Substances

You can navigate to the ‘Class 2/Biotechnology Substances’ screen by clicking the ‘Next’ button
from the ‘Class 1 or 2/Biotechnology Chemical Substances’ screen when you select the ‘Class
2/Biotechnology’ radio button. You can also access this screen by clicking the ‘Save’ icon ( )
within the action bar and clicking the ‘Class 2/Biotechnology Substances’ link within the
navigation tree.
The ‘Class 2/Biotechnology Substances’ screen provides fields for you to enter information
regarding a class 2/biotechnology chemical substance. A class 2/biotechnology chemical
substance is a substance that may not have a defined chemical structure that has been identified.
This screen provides fields for you to identify specific elements in the creation of the chemical
using the following fields: ‘Precursor Substances,’ ‘Nature of Reaction,’ and ‘Range of
Composition (Optional).’
You will be able to enter precursor substances by searching SRS or by the manual entry fields
when the substance is not in SRS. The substances will display in a table listing the ‘Chemical
Name’ and CASRN.
The system provides fields for you to capture ‘Nature of Reaction’ and ‘Range of Composition’
in text boxes.
• Precursor Substances: This table captures the chemicals identified as immediate precursor
substances, along with the respective CASRNs.
• Search SRS: Click the ‘Search SRS’ button to display the ‘Search Substance Registry
Services’ pop-up window. Refer to Section Error! Reference source not found. for
additional details regarding the search SRS functionality.
• Chemical Name: Displays the chemical name associated with a precursor substance. Click
the ‘Chemical Name’ link to navigate to the ‘Search SRS’ pop-up window for edits.
• CASRN: Displays the CASRN associated with a precursor substance.
• Action: Click the ‘Delete’ icon ( ) to delete the entire chemical row permanently from the
system. A warning message will display to confirm the deletion of the chemical.
• Nature of Reaction: Enter the ‘Nature of Reaction’ description. This is a required field.
• Range of Composition: Enter the ‘Range of Composition’ description.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window and upload a document. Refer to Section Error! Reference source not
found. for further details regarding the attach document functionality.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ window.
• Description: Displays the description associated with a document.
• Action: Click the ‘Delete’ icon ( ) to delete the entire document row permanently from the
system. A warning message displays to confirm the deletion.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
148

Exhibit 6- shows a screen capture of the ‘Class 2 Substances’ screen (Scroll 1):
Exhibit 6-6: Class 2 Substances Screen

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
149

Exhibit 6-7 shows a screen capture of the ‘Class 2 Substances’ screen (Scroll 2):
Exhibit 6-7: Class 2 Substances Screen (Scroll 2)

Navigation: Click the ‘Next’ button to navigate to the ‘Use Information’ screen. You can also
access this screen by clicking the ‘Use Information’ link within the navigation tree.
6.1.7

Polymer Identification Information

You can navigate to the ‘Polymer Identification Information’ screen by clicking the ‘Next’
button from the ‘Chemical Identification Information’ screen when you select the ‘Polymer’
radio button. You can also access this screen by clicking the ‘Polymer Identification
Information’ link within the navigation tree after clicking the ‘Save’ icon within the bottom
action bar.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
150

Click the ‘Add New Chemical’ button to create a chemical substance. Upon clicking the ‘Add
New Chemical’ button, an expandable/collapsible field set generates that contains numerous
fields that pertain to the particular polymer. The system provides numerous fields for you to
enter multiple chemical substances, each with unique information, by clicking the ‘Add New
Chemical’ button for each chemical you wish to identify.
For a single component submission, create the field set by clicking the ‘Add New Chemical’
button. Upon clicking the ‘Add New Chemical’ button, the application generates a field set
containing numerous fields for you to enter information pertaining to that particular chemical.
For a multi-component submission, create individual field sets by clicking the ‘Add New
Chemical’ button. Multi-component chemical submissions occur when two or more chemicals
always generate together in a single pot and are never isolated. Upon clicking the ‘Add New
Chemical’ button, the application generates a field set containing numerous fields for you to
enter information pertaining to that particular chemical. Enter additional chemical components,
each with unique identifying information, by clicking the ‘Add New Chemical’ button for each
additional chemical that is part of the multi-component mixture. All multi-component chemicals
will reside in one chemical folder in the navigation tree.
• Add New Chemical: Click the button to generate the ‘Polymer Identification Information’
field set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Add Chemical ID: Click the ‘Add Chemical ID’ button within the ‘Polymer Identification
Information’ field set to generate the ‘Add Chemical ID’ pop-up window. You can search for
the reported chemical(s) either by the ‘CASRN’ or ‘CA Index Name or Other Synonym.’ If
you retrieve zero results, the system provides fields for you to enter the chemical information
by filling in the ‘Chemical Name’ and the ‘Chemical Abstract Services Registry Number’
(CASRN) under the manual entry field set. The system provides functionality for you to enter
the selected chemical by clicking the ‘OK’ button located at the bottom of the ‘Add Chemical
ID’ window. Refer to Section 3.10 for further details regarding the search SRS functionality.
• Chemical Name: The system provides fields for you to identify the ‘Chemical Name’ and
the CASRN (if available). The system provides functionality for you to search for the
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
151

chemical substance using the ‘Add Chemical ID’ search or manually enter the chemical
information in the ‘Add Chemical ID’ pop up.
• ID Method: The system shall require that you identify which ID method was used to
determine the chemical identity. When you select ‘Method 1 (CAS Inventory Expert
Service),’ the system generates an ‘Attach IES Report’ button for you to attach an IES report.
If you select ‘Method 1,’ you are required to attach an IES report. You can also select
‘Method 2 (Other Method).’
• Attach IES Report: Click the ‘Attach IES Report’ button within the ‘Polymer Identification
Information’ field set after selecting the ‘Method 1 (CAS Inventory Expert Service)’ radio
button to access the ‘Attach IES Report’ pop-up window. After you attach the document(s),
and click the ‘OK’ button, the ‘Attach IES Report’ pop-up window closes and the document
information displays in a table format on the ‘Polymer Identification Information’ screen.
The attachment table displays the file name of the document and the user-provided
description of the document. Click the ‘Delete’ icon ( ) located under the ‘Actions’ column
to delete unwanted documents. Click the file name link under the ‘File Name’ column to
access or edit previously attached documents.
• Chemical Structure Diagram: The system allows you to attach a chemical structure
diagram.
• Attach Chemical Structure: Click the ‘Attach Chemical Structure’ button within the
‘Polymer Identification Information’ field set to access the ‘Attach Chemical Structure’ popup window. You can attach the file(s) and enter a description of the document.
• File Name: Displays the file name and file extension of the document that is uploaded on the
‘Attach Chemical Structure’ window.
• Description: Displays the description of the chemical structure.
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached chemical structure row
permanently from the system. A warning message displays to confirm the deletion.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality in
an expandable/collapsible field set.
After the document is attached and you click the ‘OK’ button, the ‘Attach Chemical Structure’
pop-up window closes and the document information will be displayed in a table format on the
‘Polymer Identification Information’ screen. The attachment table displays the file name of the
document and provided description of the document. The system provides functionality for you
to delete unwanted documents by clicking the ‘Delete’ icon ( ) located under the ‘Actions’
column. Click the appropriate file name of the document within the ‘File Name’ column of the
attachment table to access or edit previously attached documents.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
152

Exhibit 6-5 shows a screen capture of the ‘Polymer Identification Information’ screen:
Exhibit 6-5: Polymer Identification Information Screen

Monomers and Other Reactants

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
153

The ‘Monomers and Other Reactants’ screen is used to identify the chemical measurements and
monomers that make up a polymer. The ‘Monomers and Other Reactants’ screen has an ‘Add
Monomer’ button that allows you to identify the monomer(s) that make up the polymer
composition.
• Add Monomer: Click the ‘Add Monomer’ button to generate an expandable/collapsible field
set.
• Cancel: Click the ‘Cancel’ link located in the upper right-hand corner of the
expandable/collapsible field set to prevent edits from saving and to remove a field set. The
‘Cancel’ link displays when the expandable/collapsible field set is open for editing. A
confirmation message displays to confirm the action.
• Edit: Click the ‘Edit’ link located in the upper right-hand corner of the
expandable/collapsible field set to modify the information entered in the fields. The ‘Edit’
link displays when the expandable/collapsible field set has been saved and the data is not
currently editable.
• Delete: Click the ‘Delete’ icon ( ) located in the upper right-hand corner of the
expandable/collapsible field set to delete the field set. A confirmation message displays to
confirm the deletion.
• Expand All: Click the ‘Expand All’ link located at the upper-right of the
expandable/collapsible field sets to expand a series of field sets.
• Collapse All: Click the ‘Collapse All’ link located at the upper-right of the
expandable/collapsible field sets to collapse a series of field sets.
• Search SRS: Click the ‘Search SRS’ button to generate the ‘Search Substance Registry
Services’ pop-up window. Refer to Section Error! Reference source not found. for
additional details regarding the search SRS functionality.
• CAS Registry Number: Displays the CASRN for the specified monomer; this field
populates based on information entered on the ‘Search Substance Registry Services’ pop-up
window. This is a required field.
• Monomer or Other Reactant: Displays the monomer or other reactant name; this field
populates based on information entered on the ‘Search Substance Registry Services’ pop-up
window. This is a required field.
• Include in Identity: Check the ‘Include in Identity’ checkbox to claim the value for
‘Monomer or Other Reactant’ as part of the monomer identification.
• Typical Composition: Enter the ‘Typical Composition’ value that a monomer contributes to
a polymer; the value entered must be a positive numerical value greater than zero (0) and less
than or equal to 100 with up to three decimal points. If the value entered is less than or equal
to ‘2’ a warning will be displayed in the global ‘Validate’ function or during the submission
process indicating that the ‘Typical Composition’ is a value that is less than or equal to 2%
and asking the user whether it should be included in the ‘Chemical Identity.’ This is a
required field.
• Save: Click the button to save the information entered within the expandable/collapsible field
set. You must click this button instead of the ‘Save’ icon ( ) located within the bottom
action bar to successfully save the entered information within the field set before being able
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
154

to navigate away from the screen using the ‘Previous’ and ‘Next’ buttons. Refer to Section
Error! Reference source not found. for more information regarding the save functionality
in an expandable/collapsible field set.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window. Refer to Section Error! Reference source not found. for additional details
regarding the attach document functionality.
• File Name: Displays the file name and file extension of the file that is uploaded on the
‘Attach Documents’ pop-up window. Click the file name link to navigate to the ‘Attach
Documents’ pop-up window to make any edits.
• Description: Displays the description associated with a document.
• Actions: Click the ‘Delete’ icon ( ) to delete the entire attached document row permanently
from the system. A warning message displays to confirm the deletion of the document.
Exhibit 6-6 shows a screen capture of the ‘Monomers and Other Reactants’ screen:
Exhibit 6-6: Monomers and Other Reactants Screen

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
155

Navigation: Click the ‘Next’ button to navigate to the ‘Use Information’ screen. You can also
access this screen by clicking the ‘Use Information’ link within the navigation tree.
6.1.9

Use Information

You can navigate to the ‘Use Information’ screen by clicking the ‘Next’ button from the ‘Class 1
or 2 Chemical Substances’ screen, from the ‘Class 2 Substances’ screen, or from the ‘Monomers
and Other Reactants’ screen, depending on the choice made on the ‘Chemical Identification
Information’ screen. You can also access this screen by clicking the ‘Use Information’ link
within the navigation tree.
The ‘Use Information’ screen captures data about the chemical substance’s intended use. When
you navigate to the screen, the screen contains a text box with instructional text that reads, ‘How
will the substance be used?’ Enter specific data for the chemical substance and then advance to
the next screen.
• How will the substance be used?: Enter data regarding how the chemical substance is
intended to be used. This is a required field.
Exhibit 6-7 shows a screen capture of the ‘Use Information’ screen:
Exhibit 6-7: Use Information Screen

Navigation: Click the ‘Next’ button to navigate to the ‘Document Management’ screen. You can
also access this screen by clicking the ‘Document Management’ link within the navigation tree.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
156

6.1.10

Document Management

You can navigate to the ‘Document Management’ screen by clicking the ‘Next’ button from the
‘Use Information’ screen. You can also access this screen by clicking the ‘Document
Management’ link within the navigation tree.
The ‘Document Management’ screen is used to attach required documents to the electronic form.
The user must attach three required documents: ‘Spectrum of Substance,’ ‘Statement of
Commercialization,’ and ‘Statement of Research and Development.’ The application also allows
the user to attach ‘Other’ documents.
Please note that in IE 7, you must attach the three required documents before clicking the ‘Next’
button and navigating to the next screen. If you click the ‘Next’ button with only one or two
documents attached, you will be taken to an error screen. Navigate away from this screen using
the back button on your browser and check that the correct documents have been attached.
• Attach Document: Click the ‘Attach Document’ button to generate the ‘Attach Documents’
pop-up window to upload documents. Refer to Section Error! Reference source not found.
for additional details regarding the attach document functionality.
• Document Name: Displays the document name and file extension of the document uploaded
on the ‘Attach Documents’ pop-up window.
• Document Type: Displays the document type associated with the uploaded document.
• Action: Click the ‘Delete’ icon ( ) to delete the entire document row permanently from the
system. A warning message displays to confirm the deletion of the document.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
157

Exhibit 6-8 shows a screen capture of the ‘Document Management’ screen:
Exhibit 6-8: Document Management Screen

Optional Cover Letter

You can navigate to the ‘Optional Cover Letter’ screen by clicking the ‘Next’ button from the
‘Document Management’ screen. You can also access this screen by clicking the ‘Optional
Cover Letter’ link within the navigation tree.
The ‘Optional Cover Letter’ screen is used to communicate information with EPA that is not
collected elsewhere in the form. The cover letter is used to give EPA resources and special
instructions regarding the application.
• Optional Cover Letter: Enter any additional special instructions regarding the form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
158

Exhibit 6-9 shows a screen capture of the ‘Optional Cover Letter’ screen:
Exhibit 6-9: Optional Cover Letter Screen

Navigation: Click the ‘Validate’ icon ( ) located in the bottom action bar to validate the form.
Click the ‘Save’ icon ( ) located in the bottom action bar to save the overall form. Click the
‘Preview’ icon ( ) to view a PDF preview of the form. Click the ‘Submit’ icon ( ) located in
the bottom action bar to begin the submission process and navigate to the ‘Submitting Official
Information’ screen.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
159

Preview

The system provides the option to preview a form at any point during the submission process.
Click the ‘Preview’ icon ( ), located within the bottom action bar, to see a PDF version of the
form. A screen will display for you to view either the ‘Full’ or the ‘Sanitized’ version of the PDF
differentiated by buttons. After you choose either the ‘Full’ or ‘Sanitized’ PDF, the application
generates a draft, watermarked PDF version of the form.
Please note in IE 7, the ‘Preview EPMN FORM’ screen text might be misaligned.
The watermark reads ‘Not for Submission’ and displays across each page in the background. The
form preview displays the entire form in a printable format. The preview functionality provides
the flexibility to track the status of the form and see the entire form in a single viewpoint.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
160

Exhibit 7-1 shows a screen capture for the ‘Preview’ of the Biotechnology form:
Exhibit 7-1: Preview Biotechnology Form Screen

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
161

Exhibit 7-2 shows a screen capture for the ‘Preview’ of the Biotechnology form:
Exhibit 7-2: Preview Biotechnology Form PDF

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
162

Validate

You can click the ‘Validate’ icon ( ) at any stage of completing a Section 5 Notices and
Supports form. The ‘Section 5 Notices and Supports Validation’ pop-up window displays when
you click the ‘Validate’ icon ( ). Disable the pop-up blocker within your internet browser so
that the ‘Section 5 Notices and Supports Validation’ pop-up window displays correctly. The
‘Section 5 Notices and Supports Validation’ pop-up window displays a report of all validation
errors and warning messages. During the validation process, the application validates each screen
of the Section 5 Notices and Supports form to find missing and invalid data.
Please note in IE 7, the ‘Help’ button aligns to the right side of the ‘Section 5 Notices and
Supports Validation’ pop-up window.
Validation Errors: Errors are denoted by an ‘Error’ icon ( ) and can be fixed by clicking the
error link. The links will display the Screen Title Name (e.g., Chemical Identification) and the
associated error. After you click a link, the main application screen will display the section
where the error occurred so you can easily fix the error. Once you have fixed the error(s), click
the ‘Validate’ icon ( ) again to refresh the ‘Section 5 Notices and Supports Validation’ pop-up
window. If the information you fixed passes validation, the error will be removed from the
‘Section 5 Notices and Supports Validation’ pop-up window. You must fix all validation errors
to submit the form to CDX successfully.
Warning Messages: Warnings are denoted by a ‘Warning’ icon ( ) and can be fixed by
clicking the warning link. The links will display the Screen Title and the associated warning.
After you click a link, the main application screen will display the section where the warning
occurred so you can easily fix the warning. Once you have fixed the warning(s), click the
‘Validate’ icon ( ) again to refresh the ‘Section 5 Notices and Supports Validation’ pop-up
window. If the information you fixed passes validation, the warning will be removed from the
‘Section 5 Notices and Supports Validation’ pop-up window. You can pass validation and
continue to submit a form to CDX with active warning messages.
You can close the ‘Section 5 Notices and Supports Validation’ pop-up window by clicking the
‘X’ button located at the top right corner of the window.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
163

Exhibit 8-1 shows a screen captures for the ‘Section 5 Notices and Supports Validation’ pop-up
window:
Exhibit 8-1: Section 5 Notices and Supports Validation Pop-Up Window

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
164

Submit to EPA via CDX

As the Secondary AO, you have the ability to sign and submit a Joint or Letter of Support form
for a Section 5 Notices and Supports form to EPA. You may also submit amendments for Joint
forms. You can save your form at any point during the data entry process. Any assigned Supports
for your form cannot submit the Section 5 Notices and Supports form. The save functionality
allows you to return to a form at any point in the future.
Once you complete all required information and pass validation, the system will allow a Section
5 Notices and Supports form to be successfully submitted.
9.1

Submitting Official Information

Click the ‘Submit’ icon ( ) located in the bottom action bar of the Section 5 Notices and
Supports application to access the ‘Submitting Official Information’ screen. This screen displays
to a Secondary AO upon submission.
After clicking the ‘Submit’ icon ( ), the system requires you to review your contact
information provided during CDX registration. The system also requires you to identify your job
title. Click the ‘Home’ button to navigate to the Section 5 Notices and Supports ‘Home’ screen.
The following statement, which displays to the Primary AO and Secondary AO, must be
confirmed before the system will allow you to move forward: “Please confirm that you are the
legally responsible party from the submitting company.” If you check the checkbox associated
with this statement, the application navigates to either the appropriate certification screen or the
‘Cross-Media Electronic Reporting Regulation (CROMERR)’ screen. The checkbox must be
checked in order to continue with the submission.
A ‘Submitting On Behalf Of’ checkbox will be displayed on the screen if you are submitting an
amendment. After you check the checkbox, click the ‘Next’ button to navigate to the ‘Submitting
On Behalf Of’ screen. The ‘Submitting On Behalf Of’ checkbox is only displayed for
amendments/revisions/updates to the original submission.
Please note in IE 7, the ‘Cancel’ and ‘Next’ buttons will be misaligned in the center of the
‘Submitting Official Information’ screen.
• Submitting On Behalf Of: This checkbox only displays for amendments/revisions/updates
to an original submission.
• CBI: Check the ‘CBI’ checkbox to claim the submitting official’s information as
confidential.
• Please confirm that you are the legally responsible party from the submitting company:
Check the checkbox to confirm that the individual submitting the form has permission to do
so.
• First Name: Displays the first name of the submitting official, which has been pre-populated
from CDX registration information.
• Middle Initial: Displays the middle initial of the submitting official, which has been prepopulated from CDX registration information.
• Last Name: Displays the last name of the submitting official, which has been pre-populated
from CDX registration information.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
165

• Job Title: Enter the job title of the submitting official. This is a required field.
• Company Name: Displays the company name of the submitting official, which has been
pre-populated from CDX registration information.
• Phone Number: Displays the phone number of the submitting official, which has been prepopulated from CDX registration information.
• Email Address: Displays the email address of the submitting official, which has been prepopulated from CDX registration information.
• Mailing Address 1: Displays the first line of the mailing address from CDX registration
information.
• Mailing Address 2: Displays the second line of the submitting official’s mailing address,
which has been pre-populated from CDX registration information.
• City: Displays the city of the submitting official’s mailing address, which has been prepopulated from CDX registration information.
• State: Displays the state of the submitting official’s mailing address, which has been prepopulated from CDX registration information.
• Postal Code: Displays the postal code of the submitting official’s mailing address, which has
been pre-populated from CDX registration information.
• Country: Displays the country of the submitting official’s mailing address, which has been
pre-populated from CDX registration information.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
166

Exhibit 9-1 shows a screen capture of the ‘Submitting Official Information’ screen:
Exhibit 9-1: Submitting Official Information Screen

Navigation: Click the ‘Next’ button to continue with submitting the form and proceed to the
‘Submission Process: Validation’ screen.
9.2

Submitting On Behalf Of

Click the ‘Submit’ icon ( ) that is located in the bottom action bar of the Section 5 Notices and
Supports application to access the ‘Submitting Official Information’ screen. This screen only
displays for amendments/revisions/updates/etc. to an original submission.
After checking the ‘Submitting On Behalf Of’ checkbox on the ‘Submitting Official
Information’ screen (which is only displayed for amendments/revisions/updates/etc. to an
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
167

original submission), you will be taken to the ‘Submitting On Behalf Of’ screen to enter in the
information about the company on which you are submitting the form. Click the ‘Home’ button
to navigate to the Section 5 Notices and Supports ‘Home’ screen.
• CBI: Check the ‘CBI’ checkbox to claim the ‘Submitting On Behalf Of’ information as
confidential.
• First Name: Enter the first name of the ‘Submitting On Behalf Of’ individual on whose
behalf you are submitting this form.
• Middle Initial: Enter the middle initial of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting this form.
• Last Name: Enter the last name of the ‘Submitting On Behalf Of’ individual on whose
behalf you are submitting this form.
• Job Title: Enter the job title of the ‘Submitting On Behalf Of’ individual on whose behalf
you are submitting this form.
• Company Name: Enter the company name of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting this form.
• Phone Number: Enter the phone number of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting this form.
• Email Address: Enter the email address of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting this form. The email address must follow the standard email
address format: John.Doe@abc.com.
• Mailing Address 1: Enter the first line of the mailing address of the ‘Submitting On Behalf
Of’ individual on whose behalf you are submitting this form.
• Mailing Address 2: Enter the second line of the mailing address of the ‘Submitting On
Behalf Of’ individual on whose behalf you are submitting this form.
• City: Enter the city of the mailing address of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting you are submitting this form.
• State: Enter the state of the mailing address of the ‘Submitting On Behalf Of’ individual on
whose behalf you are submitting this form.
• Postal Code: Enter the postal code of the ‘Submitting On Behalf Of’ individual on whose
behalf you are submitting this form.
• Country: Enter the country of the ‘Submitting On Behalf Of’ individual on whose behalf
you are submitting this form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
168

Exhibit 9-2 shows a screen capture of the ‘Submitting On Behalf Of’ screen:
Exhibit 9-2: Submitting On Behalf Of Screen

Navigation: Click the ‘Next’ button to continue with submitting the form and proceed to the
‘Submission Process: Validation’ screen. Click the ‘Home’ button to navigate back to the
Section 5 Notices and Supports ‘Home’ screen.
9.3

Submission Process: Validation

Click the ‘Submit’ icon ( ) that is located in the bottom action bar of the Section 5 Notices and
Supports form to begin the submission process and access the ‘Submission Process: Validation’
screen.
The first step in the submission process will validate the information entered within the Section 5
Notices and Supports form. After a form is validated, the system will generate a PDF.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
169

Exhibit 9-3 shows a screen capture of the ‘Submission Process: Validation’ screen:
Exhibit 9-3: Submission Process: Validation Screen

Exhibit 9-4 shows a screen capture of the ‘Submission Process: PDF Generation’ screen:
Exhibit 9-4: Submission Process: PDF Generation Screen

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
170

Navigation: Click the ‘View PDF’ button to generate and view a PDF of the form. Click the
‘Continue’ button to continue with submitting the form and proceed to the ‘Cross-Media
Electronic Reporting Regulation (CROMERR) Certification’ screen.
9.4

Cross-Media Electronic Reporting Regulation (CROMERR) Certification

Click the ‘Continue’ button on the ‘Submission Process: PDF Generation’ screen to access the
‘Cross-Media Electronic Reporting Regulation (CROMERR) Certification’ screen.
CROMERR provides the legal framework for electronic reporting under all of EPA’s
environmental regulations.
After clicking the ‘Continue’ button, the system requires you to certify that the form is
CROMERR compliant. By clicking the ‘I Certify’ button on the ‘Cross-Media Electronic
Reporting Regulation (CROMERR) Certification’ screen, you authenticate all of the information
entered in the form. Click the ‘Cancel’ button to navigate back to the Section 5 Notices and
Supports application.
Exhibit 9-5 shows a screen capture for the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Certification’ screen:
Exhibit 9-5: Cross-Media Electronic Reporting Regulation (CROMERR) Certification
Screen

Navigation: Click the ‘I Certify’ button to continue with submitting the form and proceed to the
‘CROMERR Login’ screen.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
171

9.5

Cross-Media Electronic Reporting Regulation (CROMERR) Login

You can access the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Login’ screen
by clicking the ‘I Certify’ button on the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Certification’ screen.
To proceed with the submission, log into CDX using the credentials you provided during CDX
registration:
• Please login with your CDX password: Enter your CDX registration password.
Exhibit 9-6 shows a screen capture of the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Login’ screen.
Exhibit 9-6: Cross-Media Electronic Reporting Regulation (CROMERR) Login Screen

Navigation: Enter your CDX registration password and click the ‘Next’ button to navigate to the
‘Cross-Media Electronic Reporting Regulation (CROMERR) Security Question’ screen.
9.6

Cross-Media Electronic Reporting Regulation (CROMERR) Security Question

You can access the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Security
Question’ screen by entering your CDX registration password on the ‘Cross-Media Electronic
Reporting Regulation (CROMERR) Login’ screen and clicking the ‘Next’ button.
The ‘Cross-Media Electronic Reporting Regulation (CROMERR) Security Question’ screen
randomly selects and displays one of the five CROMERR eSIG-PIN questions you answered on
the ‘20-5-1 Question’ screen during the initial login to CDX.
eSIG-PIN Authorization Code: Provide one of the five secret answers to the questions that
were pulled from the list of 20 CDX security questions.
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
172

Exhibit 9-7 shows a screen capture of the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Security Question’ screen:
Exhibit 9-7: Cross-Media Electronic Reporting Regulation (CROMERR) Security Question
Screen

Navigation: Answer the security question and click the ‘Next’ button to navigate to the ‘Submit
to CDX’ screen.
9.7

Submit to CDX

You can access the ‘Submit to CDX’ screen after answering the 20-5-1 security question on the
‘Cross-Media Electronic Reporting Regulation (CROMERR) Security Question’ screen and
clicking the ‘Next’ button.
On the ‘Submit to CDX’ screen, you will see a certification message. Read the message and
acknowledge by clicking the ‘Confirm’ button. Once you have clicked the ‘Confirm’ button,
your form will be submitted to CDX.
This screen is only applicable to the original forms (PMN, Biotechnology, and Bona Fide). This
screen will display during the submission process for joint submissions and Letters of Support.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
173

Exhibit 9-8 shows a screen capture of the ‘Submit to CDX’ screen:
Exhibit 9-8: Submit to CDX Screen

Navigation: Click the ‘Confirm’ button to navigate to the ‘Cross-Media Electronic Reporting
Regulation (CROMERR) Submission’ screen.
9.8

Cross-Media Electronic Reporting Regulation (CROMERR) Submission

You can access the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Submission’
screen by acknowledging the certification to submit to EPA via CDX by clicking the ‘Confirm’
button.
On the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Submission’ screen, you
will see a message indicating the submission has been successfully submitted to EPA via CDX.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
174

Exhibit 9-9 shows a screen capture of the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Submission’ screen:
Exhibit 9-9: Cross-Media Electronic Reporting Regulation (CROMERR) Submission
Screen

Navigation: Click the ‘Finish’ button to navigate back to the Section 5 Notices and Supports
‘Home’ screen. Click the ‘Forms’ link or tab to find your locked processed submission. The
‘Section 5 Notices and Supports Forms’ screen will display the submission with a ‘Lock’ icon
(

) under the ‘Action’ column and will display a status of ‘Submitted.’

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
175

Download Copy of Record

To download a Copy of Record, navigate to the ‘Section 5 Notices and Supports Forms’ screen
and locate a form alias for which you have successfully completed a submission and which has a
status of ‘Submitted.’
Click the ‘Copy of Record’ icon ( ) from the ‘Section 5 Notices and Supports Forms’ screen to
navigate to the ‘Enter Passphrase’ screen to login into CDX. The ‘Enter Passphrase’ screen
requires you to enter the passphrase originally associated with the form. If your passphrase is
entered correctly, you will access the ‘Cross-Media Electronic Reporting Regulation
(CROMERR) Login’ screen where you are required to enter your credentials you provided
during CDX registration. Once you have provided the correct CDX password, click the ‘Next’
button to navigate to the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Security
Question’ screen. The ‘Cross-Media Electronic Reporting Regulation (CROMERR) Security
Question’ screen randomly selects and displays one of the five CROMERR eSIG-PIN questions
that you answered on the 20-5-1 Question screen during CDX registration. Answer the
CROMERR security question and click the ‘OK’ button. If your answer was successful, you will
be taken to the ‘Download Copy of Record’ screen.
Exhibit 10-1 shows a screen capture of the ‘Download Copy of Record’ screen:
Exhibit 10-1: Download Copy of Record Screen

The ‘Download Copy of Record’ screen displays the ‘File Name’ and ‘Action’ columns in a
table format. Click the ‘Copy of Record’ icon ( ) to download the individual files uploaded
during the submission process, PDF version of the submission or the XML version of the Section
5 Notices and Supports form. When you click the ‘Copy of Record’ icon ( ), the system will
TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
176

allow you to view or download the individual files that were uploaded during the submission
process.
After you click the ‘Copy of Record’ icon ( ), enter the passphrase associated with the case
number, and click the ‘Next’ button. If the passphrase was correctly entered, the application will
take you to the ‘CROMERR Login’ screen to enter the CDX password. If your login was
successful, you will access to the ‘CROMERR Security Question’ screen. The ‘CROMERR
Security Question’ screen randomly selects and displays one of the five CROMERR eSIG-PIN
questions that you answered on the 20-5-1 Question screen during the initial login to CDX.
Answer the CROMERR security question and click the ‘OK’ button. If your answer was
successful, you will navigate to the ‘Download Copy of Record’ screen.
Exhibit 10-2 shows a screen capture of the download prompt screen:
Exhibit 10-2: Download Prompt Screen

If you click the ‘Copy of Record’ icon (

) you will download:

• A PDF version of the Section 5 Notices and Supports form
• An XML version of the Section 5 Notices and Supports form
• The documents attached to a Section 5 Notices and Supports form

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
177

Create an Amendment

To amend a submitted Joint PMN, Joint Biotechnology, or Bona Fide Letter of Support
submission, navigate to the ‘Section 5 Notices and Supports Forms’ screen and locate a
previously submitted form with a status of ‘Submitted.’ In addition to displaying a status of
‘Submitted’ under the ‘Status’ column, the ‘Lock’ icon ( ) will be displayed under the ‘Action’
column. Click the ‘Lock’ icon ( ) under the ‘Action’ column to start an amendment.
Exhibit 11-1 shows a screen capture of the ‘Section 5 Notices and Supports Forms’ screen:
Exhibit 11-1: Section 5 Notices and Supports Form

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
178

Navigation: After clicking the ‘Lock’ icon ( ), you will receive a prompt to confirm the unlock
process. If you do not want to continue with the amendment, click the ‘Cancel’ button to cancel
the amendment process and return to the ‘Section 5 Notices and Supports Forms’ screen. Click
the ‘OK’ button to close the prompt and continue with the amendment.
Exhibit 11-2 shows a screen capture of the ‘Unlock Prompt’ message:
Exhibit 11-2: Unlock Prompt Message

After you click the ‘OK’ button, you will be taken to the ‘Enter Passphrase’ screen. You must
enter the passphrase originally associated with the submission to start the revised notice process.
After you enter the passphrase and click the ‘Next’ button you will be taken to the ‘General
Form Information’ screen. Refer to Section 3.6 for further instructions on the ‘Enter Passphrase’
screen.
After a submission has been unlocked, the ‘Section 5 Notices and Supports Forms’ screen will
display a status of ‘In Progress’ under the ‘Status’ column, and an ‘Unlocked’ icon ( ) will
display under the ‘Action’ column; however, you will not see these changes until you navigate
back to the ‘Section 5 Notices and Supports Forms’ screen. Refer to Section 1 through Section
4.1.26 for instructions on editing a revised PMN form. Refer to Section 5.1.1 through Section
5.1.3 for instructions on editing a revised Biotechnology form.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
179

Resources

You can access the ‘Resources’ screen by clicking the ‘Resources’ tab located at the top of the
screen at any time during the submission process. You can also access the ‘Resources’ screen by
clicking the ‘Resources’ link from the Section 5 Notices and Supports ‘Home’ screen. The
‘Resources’ screen provides you with links to the appropriate Section 5 Notices and Supports
user guides as well as additional helpful links. Click the ‘User Guide’ link to access the Section 5
Notices and Supports user guide document.
• Regulatory Impact Analysis for the Regulation of Microbial Products of Biotechnology:
Government Costs: If you click this link, a new internet browser window will generate
displaying the ‘Regulatory Impact Analysis for the Regulation of Microbial Products of
Biotechnology: Government Costs’ screen.
• Microbial Products of Biotechnology: Final Rule (62 FR 17910): If you click this link, a
new internet browser window will generate displaying the ‘Microbial Products of
Biotechnology: Final Rule (62 FR 17910)’ screen.
• Points to Consider in the Preparation of TSCA Biotechnology Submissions for
Microorganisms: If you click this link, a new internet browser window will generate
displaying the ‘Points to Consider in the Preparation of TSCA Biotechnology Submissions
for Microorganisms’ PDF.
• CDX Homepage: If you click this link, a new internet browser window will generate
displaying the CDX Homepage.
• TSCA Chemical Substances Inventory: If you click this link, a new internet browser
window will generate displaying the ‘TSCA Chemical Substances Inventory’ screen.
• Substance Registry Services (SRS): If you click this link, a new internet browser window
will generate displaying the ‘Substance Registry Services (SRS)’ screen.
• Facility Registry System (FRS): If you click this link, a new internet browser window will
generate displaying the ‘Facility Registry System (FRS)’ screen.
The FRS generally includes such core data elements as name, address, affiliated
organizations and contacts, and industrial classifications. When using this query to search
for facilities, use any combination of facility name, geographic location, facility industrial
classification, affiliated organization and contact, program category, and national systems
information. Enter in as many fields as possible, otherwise the system will return a results
list too big to display.
To search for a specific facility, search by Facility Name, Registry ID, Zip Code, and State
for an accurate list of results. Search by City Name, Zip Code, and State to return a
truncated list of results within a geographic region.
• CAS Inventory Expert Services: If you click this link, a new internet browser window will
generate displaying the ‘CAS Inventory Expert Services (IES)’ screen.
• National Pollutant Discharge Elimination System (NPDES): If you click this link, a new
internet browser window will generate displaying the ‘National Pollutant Discharge
Elimination System (NPDES)’ screen.

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
180

• New Chemicals Program Homepage: If you click this link, a new internet browser window
will generate displaying the ‘New Chemicals Program’ screen.
• Status of Section 5 Notices: If you click this link, a new internet browser window will
generate displaying the ‘Status of Section 5 Notices’ screen.
Exhibit 12-1 shows a screen capture of the ‘Resources’ screen (Scroll 1):
Exhibit 12-1: Resources Screen (Scroll 1)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
181

Exhibit 12-2 shows a screen capture of the ‘Resources’ screen (Scroll 2):
Exhibit 12-2: Resources Screen (Scroll 2)

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
182

Appendix A
The following table displays all the definitions, acronyms, and abbreviations used in this
document and their full name.
Definitions, Acronyms, and Abbreviations
Acronym

Full Name

ACM

Alternative Control Measures

Authorized Official

BCF/BAF

Bioconcentration Factors/Bioaccumulation Factors

CBI

Confidential Business Information

Chemical Abstracts

CAS

Chemical Abstracts Service

CASRN

Chemical Abstracts Service Registry Number

CDX

Central Data Exchange

CFR

Code of Federal Regulations

CoR

Copy of Record

CROMERR

Cross-Media Electronic Reporting Regulation

CSPP

Chemical Safety and Pesticide Programs

CSV

Comma-Separated Values

DNA

Deoxyribonucleic Acid

EPA

Environmental Protection Agency

EST

Eastern Standard Time

ETI

Environmental Technology Initiative

Federal Regulation

FRS

Facility Registry System

GPC

Gel-permeation Chromatography

Identification

Internet Explorer

IES

Inventory Expert Service

Industrial Hygienist

Infrared

Kilogram

LOREX

Low Release/Low Exposure Exemption

LOS

Letter of Support

LVE

Low Volume Exemption

MCAN

Microbial Commercial Activity Notice

Mass Spectrometry

MSDS

Material Safety Data Sheet

NIOSH

National Institute for Occupational Safety and Health

NMR

Nuclear Magnetic Resonance

NOC

Notice of Commencement

NPDES

National Pollutant Discharge Elimination System

OPPT

Office of Pollution Prevention and Toxics

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized Official

December 17, 2014
183

PDF

Portable Document Format

PMN

Premanufacture Notice

POTW

Publicly Owned Treatment Works

PPE

Personal Protective Equipment

PPM

Parts Per Million

RCRA

Resource Conservation and Recovery Act

SAR

Structure-Activity Relationship

SDS

Safety Data Sheet

SME

Subject Matter Expert

SNUN

Significant New Use Notice

SNUR

Significant New Use Rule

SRS

Substance Registry Services

STN

Scientific and Technical Information Network

TERA

TSCA Experimental Release Application

TME

Test Market Exemption

TMEA

Test Marketing Exemption Application

Toxic Substances

TSCA

Toxic Substances Control Act

Ultraviolet

XML

Extensible Markup Language

TDD 9.21 OPPT MTS Section 5 Notices and Supports User Guide
Secondary Authorized
Official

December 17, 2014
184

File Type	application/pdf
File Modified	2015-03-13
File Created	2015-03-13