Download:
pdf |
pdfOMB No. 3117-0016/USITC No. 16-2-3516; Expiration Date: 6/30/2017
(No response is required if currently valid OMB control number is not displayed)
U.S. IMPORTERS’ QUESTIONNAIRE
CIRCULAR WELDED CARBON-QUALITY STEEL PIPE FROM OMAN, PAKISTAN,
THE UNITED ARAB EMIRATES, AND VIETNAM
This questionnaire must be received by the Commission by August 12, 2016
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning circular welded carbon-quality steel
pipe (“circular welded pipe”) from Oman, Pakistan, the United Arab Emirates (“UAE”), and Vietnam (Inv. Nos. 701-TA549 and 731-TA-1299, 1300, 1302, and 1303 (Final)). The information requested in the questionnaire is requested under
the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a
subpoena or other order to compel the submission of records or information in your firm’s possession (19 U.S.C. §
1333(a)). Further information on this questionnaire can be obtained from Jordan Harriman (202-205-2610,
jordan.harriman@usitc.gov).
Name of firm
Address
City
State
Zip Code
Website
Has your firm imported circular welded pipe (as defined on next page) from any country at any time since
January 1, 2013?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: CWP4)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission. By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
investigation or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements.
Name of Authorized Official
Title of Authorized Official
Date
Phone:
Signature
Email address
Fax:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 2
PART I.—GENERAL INFORMATION
Background. This proceeding was instituted in response to a petition filed on October 28, 2015, by Bull
Moose Tube Company, Chesterfield, MO; EXLTUBE, Kansas City, MO; Wheatland Tube, a division of JMC
Steel Group, Chicago, IL; and Western Tube & Conduit, Long Beach, CA. Countervailing and/or
antidumping duties may be assessed on the subject imports as a result of these proceedings if the
Commission makes an affirmative determination of injury, threat, or material retardation, and if the U.S.
Department of Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2016/circular_welded_carbon_quality_steel_pipe_oman/
final.htm
Circular welded pipe covered by these investigations is welded carbon-quality steel pipes and tube, of
circular cross-section, with an outside diameter (O.D.) not more than nominal 16 inches (406.4 mm),
regardless of wall thickness, surface finish (e.g., black, galvanized, or painted), end finish (plain end,
beveled end, grooved, threaded, or threaded and coupled), or industry specification (e.g., American
Society for Testing and Materials International (ASTM), proprietary, or other), generally known as
standard pipe, fence pipe and tube, sprinkler pipe, and structural pipe (although subject product may
also be referred to as mechanical tubing). Specifically, the term “carbon quality” includes products in
which:
(a) iron predominates, by weight, over each of the other contained elements;
(b) the carbon content is 2 percent or less, by weight; and
(c) none of the elements listed below exceeds the quantity, by weight, as indicated:
(i) 1.80 percent of manganese;
(ii) 2.25 percent of silicon;
(iii) 1.00 percent of copper;
(iv) 0.50 percent of aluminum;
(v) 1.25 percent of chromium;
(vi) 0.30 percent of cobalt;
(vii) 0.40 percent of lead;
(viii) 1.25 percent of nickel;
(ix) 0.30 percent of tungsten;
(x) 0.15 percent of molybdenum;
(xi) 0.10 percent of niobium;
(xii) 0.41 percent of titanium;
(xiii) 0.15 percent of vanadium; or
(xiv) 0.15 percent of zirconium.
Covered products are generally made to standard O.D. and wall thickness combinations. Pipe multistenciled to a standard and/or structural specification and to other specifications, such as American
Petroleum Institute (API) API-5L specification, may also be covered by the scope of these investigations.
In particular, such multi-stenciled merchandise is covered when it meets the physical description set
forth above, and also has one or more of the following characteristics: is 32 feet in length or less; is less
than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or painted (e.g., polyester coated)
surface finish; or has a threaded and/or coupled end finish.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 3
Standard pipe is ordinarily made to ASTM specifications A53, A135, and A795, but can also be made to
other specifications. Structural pipe is made primarily to ASTM specifications A252 and A500. Standard
and structural pipe may also be produced to proprietary specifications rather than to industry
specifications.
Sprinkler pipe is designed for sprinkler fire suppression systems and may be made to industry
specifications such as ASTM A53 or to proprietary specifications.
Fence tubing is included in the scope regardless of certification to a specification listed in the exclusions
below, and can also be made to the ASTM A513 specification. Products that meet the physical
description set forth above but are made to the following nominal outside diameter and wall thickness
combinations, which are recognized by the industry as typical for fence tubing, are included despite
being certified to ASTM mechanical tubing specifications:
O.D. in inches (nominal)
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.660
1.660
1.660
1.660
1.660
1.900
1.900
1.900
1.900
1.900
1.900
2.375
2.375
2.375
2.375
2.375
2.375
2.375
2.875
2.875
3.500
3.500
4.000
4.000
4.500
Wall thickness in inches
(nominal)
0.035
0.047
0.055
0.065
0.072
0.083
0.095
0.055
0.065
0.083
0.095
0.109
0.047
0.055
0.065
0.072
0.095
0.109
0.047
0.055
0.065
0.072
0.095
0.109
0.120
0.109
0.165
0.109
0.165
0.148
0.165
0.203
Gage
20
18
17
16
15
14
13
17
16
14
13
12
18
17
16
15
13
12
18
17
16
15
13
12
11
12
8
12
8
9
8
7
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 4
The scope of this proceeding does not include:
(a) pipe suitable for use in boilers, superheaters, heat exchangers, refining furnaces and feedwater
heaters, whether or not cold drawn, which are defined by standards such as ASTM A178 or ASTM A192;
(b) finished electrical conduit, i.e., Electrical Rigid Steel Conduit (also known as Electrical Rigid Metal
Conduit and Electrical Rigid Metal Steel Conduit), Finished Electrical Metallic Tubing, and Electrical
Intermediate Metal Conduit, which are defined by specifications such as American National Standard
(ANSI) C80.1-2005, ANSI C80.3-2005, or ANSI C80.6-2005, and Underwriters
Laboratories Inc. (UL) UL-6, UL-797, or UL-1242;
(c) finished scaffolding, i.e., component parts of final, finished scaffolding that enter the United States
unassembled as a “kit.” A kit is understood to mean a packaged combination of component parts that
contains, at the time of importation, all of the necessary component parts to fully assemble final,
finished scaffolding;
(d) tube and pipe hollows for redrawing;
(e) oil country tubular goods produced to API specifications;
(f) line pipe produced to only API specifications, such as API 5L, and not multi-stenciled; and
(g) mechanical tubing, whether or not cold-drawn, other than what is included in the
above paragraphs.
The products subject to this proceeding are currently classifiable in Harmonized Tariff Schedule of the
United States (HTSUS) statistical reporting numbers 7306.19.1010, 7306.19.1050, 7306.19.5110,
7306.19.5150, 7306.30.1000, 7306.30.5015, 7306.30.5020, 7306.30.5025, 7306.30.5032, 7306.30.5040,
7306.30.5055, 7306.30.5085, 7306.30.5090, 7306.50.1000, 7306.50.5030, 7306.50.5050, and
7306.50.5070. The HTSUS subheadings above are provided for convenience and U.S. Customs purposes
only. The written description of the scope of the proceeding is dispositive.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing circular welded pipe (as defined above) into the United States from a foreign manufacturer
or through its selling agent.
Reporting of information.-- If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.-- The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 5
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
I-1.
OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
40 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-2.
Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”--Each facility of a firm involved in the importation of circular welded pipe,
including auxiliary facilities operated in conjunction with (whether or not physically separate
from) such facilities.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
I-3.
Ownership.--Is your firm owned, in whole or in part, by any other firm?
No
Yes--List the following information
Firm name
I-4.
Address
Yes--List the following information.
Firm name
Address
Affiliation
Related producers.--Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of circular welded pipe?
No
Yes--List the following information.
Firm name
I-6.
Extent of
ownership
(percent)
Related importers/exporters.--Does your firm have any related firms, either domestic or
foreign, that are engaged in importing circular welded pipe from Oman, Pakistan, the UAE, or
Vietnam into the United States or that are engaged in exporting circular welded pipe from
Oman, Pakistan, the UAE, or Vietnam to the United States?
No
I-5.
Page 6
Address
Affiliation
Importing operations.--Please indicate the nature of your firm’s importing operations on
circular welded pipe. More than one answer may be applicable.
Importer of record
Takes title to the
imported product(s)
Consignee of the
imported products(s)
Customs broker or
freight forwarder
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
I-7.
Consignee.--If your firm is an importer of record of circular welded pipe but is not the
consignee, please list the consignees below (firm name, address, telephone number, and
individual to contact).
Firm name
I-8.
Page 7
Contact person
and phone
number
Address
FTZ, TIB, or bonded warehouses.--Please indicate whether your firm enters circular welded pipe
into, or withdraws such merchandise from, foreign trade zones or bonded warehouses. Also
indicate whether your firm imports circular welded pipe under the TIB (temporary importation
under bond) program.
“Foreign trade zone” is a designated location in the United States where firms utilize special
procedures that allow delayed or reduced customs duty payments on foreign merchandise, as
well as other savings. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign-Trade Zones Act.
“Bonded warehouse” is a secured facility supervised by U.S. customs, where dutiable landed
imports are stored pending their re-export, or release after payment of import duties, taxes, and
other charges. A bonded warehouse must be designed as such pursuant to the rules and
procedures set forth in 19 U.S.C. § 1555.
“Temporary Importation under Bond (“TIB”) program” is a procedure whereby imported
merchandise may be entered under certain conditions for a limited time into the United States
free of duty. Under the program, an importer posts a bond for twice the amount of duty, taxes,
etc. that would otherwise be owed on the importation and agrees to export or destroy the
merchandise within a specified time or pay liquidated damages. This program is restricted to
certain categories of merchandise listed in subheadings 9813.00.05 through 9813.00.75 of the
Harmonized Tariff Schedule of the United States(HTS).
No
Foreign trade zones
Bonded warehouses
Temporary importation under bond
Yes
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
I-9.
Page 8
Third-country trade activities.--To your knowledge, have the products subject to this
proceeding been the subject of any other import relief proceedings in the United States or in
any other countries?
No
Yes–Please specify.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 9
PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Jordan Harriman (202-2052610, jordan.harriman@usitc.gov). Supply all data requested on a calendar-year basis.
II-1.
Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II-2.
Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the importation of circular welded pipe since January 1, 2013.
(check as many as appropriate)
Office/warehouse openings
Office/warehouse closings
Relocations
Expansions
Acquisitions
Consolidations
Prolonged shutdowns or
importation curtailments
Revised labor agreements
Other (e.g., technology)
(If checked, please describe; leave blank if not applicable)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 10
II-3.
Reasons for importing if producer.--If your firm also produces circular welded pipe in the United
States, please indicate the reasons for importing this product. If your firm’s reasons differ by
source, please elaborate.
II-4.
Arranged imports.--Has your firm imported or arranged for the importation of circular welded
pipe for delivery after June 30, 2016?
“Arranged imports” are imports for which your firm has placed an order with a foreign supplier
for subject merchandise, but delivery of those imports is not scheduled to occur until after the
date listed above.
No
Yes–Fill out the table below.
Quantity (in short tons)
Period/Source
Oman
Pakistan
UAE
Vietnam SeAH
Vietnam Hongyuan
Vietnam Hoa Phat
Vietnam (all other
firms)
Other sources
Jul-Sept 2016
Oct-Dec 2016
Jan-Mar 2017
Apr-Jun 2017
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 11
Definitions
“Imports” –Those products identified for Customs purposes as imports for consumption for
which your firm was the importer of record (i.e., was responsible for paying any import duty) or
consignee (i.e., to which the merchandise was first delivered).
“Import quantities” –Quantities reported should be net of returns.
“Import values”—Values reported should be landed, duty-paid values at the U.S. port of entry,
including ocean freight and insurance costs, brokerage charges, and import duties (i.e., all
charges except inland freight in the United States).
“U.S. commercial shipments”— Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” –Product consumed internally by your firm.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
Such transactions are valued at fair market value.
“Export shipments”— Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories” --Finished goods inventory, not raw materials or work in progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-5.
Page 12
IMPORTS FROM OMAN.–Report your firm’s imports and your firm’s shipments and inventories
of circular welded pipe imported from Oman by your firm during the specified periods.
OMAN
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-5.
Page 13
IMPORTS FROM OMAN.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K, L and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-6a.
Page 14
U.S. Shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
OMAN
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipments in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-5. The following reconciliation sums the total
quantity and the total value in this grid and subtracts out the reported data from question II-5. If the
calculated fields below return values other than zero (i.e., “0”), the data reported must be revised prior
to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-6b.
Page 15
U.S. Shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
OMAN
Calendar year 2015
U.S. Shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. Shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II5). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-5. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-6c.
Page 16
Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
OMAN
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-7.
Page 17
Subject multi-stenciled and mechanical tubing from Oman.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Oman1
Quantity
Value
In-scope mechanical tubing from
Oman1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-5.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-8.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from Oman
for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from Oman
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-9.
Page 18
IMPORTS FROM PAKISTAN.–Report your firm’s imports and your firm’s shipments and
inventories of circular welded pipe imported from Pakistan by your firm during the specified
periods.
PAKISTAN
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-9.
Page 19
IMPORTS FROM PAKISTAN.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K, L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 20
II-10a. U.S. Shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
PAKISTAN
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipments in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-9. The following reconciliation sums the total
quantity and the total value in this grid and subtracts out the reported data from question II-9. If the
calculated fields below return values other than zero (i.e., “0”), the data reported must be revised prior
to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 21
II-10b. U.S. Shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
PAKISTAN
Calendar year 2015
U.S. Shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. Shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II9). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-9. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 22
II-10c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
PAKISTAN
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-11.
Page 23
Subject multi-stenciled and mechanical tubing from Pakistan.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Pakistan1
Quantity
Value
In-scope mechanical tubing from
Pakistan1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-9.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-12.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Pakistan for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from Pakistan
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-13.
Page 24
IMPORTS FROM THE UAE.–Report your firm’s imports and your firm’s shipments and
inventories of circular welded pipe imported from the United Arab Emirates (“UAE”) by your
firm during the specified periods.
THE UAE
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-13.
Page 25
IMPORTS FROM THE UAE.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 26
II-14a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
THE UAE
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipments in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-13. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-13. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 27
II-14b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
THE UAE
Calendar year 2015
U.S. Shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II13). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-13. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 28
II-14c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
THE UAE
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-15.
Page 29
Subject multi-stenciled and mechanical tubing from the UAE.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from the UAE1
Quantity
Value
In-scope mechanical tubing from
the UAE1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-13.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-16.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from the
UAE for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from the UAE
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-17.
Page 30
IMPORTS FROM SeAH Steel VINA Corporation in Vietnam (“Vietnam SeAH”).–Report your firm’s
imports and your firm’s shipments and inventories of circular welded pipe imported from Vietnam
SeAH by your firm during the specified periods.
VIETNAM SeAH
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-17.
Page 31
IMPORTS FROM VIETNAM SeAH.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K, L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 32
II-18a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
VIETNAM SeAH
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-17. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-17. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 33
II-18b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
VIETNAM SeAH
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II17). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-17. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 34
II-18c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
VIETNAM SeAH
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-19.
Page 35
Subject multi-stenciled and mechanical tubing from Vietnam SeAH.--Circular welded pipe
may be multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for
purposes of these investigations, such pipe is considered to be “circular welded pipe” if it is 32
feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized
and/or painted surface finish; or has a threaded and/or coupled end finish; see definitions in
the instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical
tubing specifications (for purposes of these investigations, such pipe is considered to be
“circular welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard,
structural, fence, or sprinkler pipe). Please report these imports in the following table only if
they were reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Vietnam SeAH1
Quantity
Value
In-scope mechanical tubing from
Vietnam SeAH 1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-17.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-20.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Vietnam SeAH for the 12-month period of October 2014 through September 2015 specified
below.
Actual imports
Item
Overall U.S. imports from Vietnam SeAH
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-21.
Page 36
IMPORTS FROM Haiphong Hongyuan Machinery Manufactory Co., Ltd. in Vietnam (“Vietnam
Hongyuan”).–Report your firm’s imports and your firm’s shipments and inventories of circular
welded pipe imported from Vietnam Hongyuan by your firm during the specified periods.
VIETNAM Hongyuan
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-21.
Page 37
IMPORTS FROM VIETNAM Hongyuan.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 38
II-22a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
VIETNAM Hongyuan
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-21. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-21. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 39
II-22b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
VIETNAM Hongyuan
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II21). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-21. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 40
II-22c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
VIETNAM Hongyuan
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-23.
Page 41
Subject multi-stenciled and mechanical tubing from Vietnam Hongyuan.--Circular welded
pipe may be multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for
purposes of these investigations, such pipe is considered to be “circular welded pipe” if it is 32
feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized
and/or painted surface finish; or has a threaded and/or coupled end finish; see definitions in
the instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical
tubing specifications (for purposes of these investigations, such pipe is considered to be
“circular welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard,
structural, fence, or sprinkler pipe). Please report these imports in the following table only if
they were reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Vietnam Hongyuan1
Quantity
Value
In-scope mechanical tubing from
Vietnam Hongyuan 1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-21.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-24.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Vietnam Hongyuan for the 12-month period of October 2014 through September 2015 specified
below.
Actual imports
Item
Overall U.S. imports from Vietnam
Hongyuan
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-25.
Page 42
IMPORTS FROM Hoa Phat Steel Pipe Co. in Vietnam (“Vietnam Hoa Phat”).–Report your firm’s
imports and your firm’s shipments and inventories of circular welded pipe imported from Vietnam
Hoa Phat by your firm during the specified periods.
VIETNAM Hoa Phat
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-25.
Page 43
IMPORTS FROM VIETNAM Hoa Phat.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 44
II-26a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
VIETNAM Hoa Phat
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-25. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-25. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 45
II-26b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
VIETNAM Hoa Phat
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II25). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-25. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 46
II-26c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
VIETNAM Hoa Phat
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-27.
Page 47
Subject multi-stenciled and mechanical tubing from Vietnam Hoa Phat.--Circular welded pipe
may be multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for
purposes of these investigations, such pipe is considered to be “circular welded pipe” if it is 32
feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized
and/or painted surface finish; or has a threaded and/or coupled end finish; see definitions in
the instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical
tubing specifications (for purposes of these investigations, such pipe is considered to be
“circular welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard,
structural, fence, or sprinkler pipe). Please report these imports in the following table only if
they were reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Vietnam Hoa Phat1
Quantity
Value
In-scope mechanical tubing from
Vietnam Hoa Phat1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-25.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-28.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Vietnam Hoa Phat for the 12-month period of October 2014 through September 2015 specified
below.
Actual imports
Item
Overall U.S. imports from Vietnam Hoa Phat
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-29.
Page 48
IMPORTS FROM all other firms in Vietnam (“Vietnam all others”).–Report your firm’s imports
and your firm’s shipments and inventories of circular welded pipe imported from all other firms in
Vietnam by your firm during the specified periods.
VIETNAM all others
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-29.
Page 49
IMPORTS FROM VIETNAM all others.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 50
II-30a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
VIETNAM all others
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-29. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-29. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 51
II-30b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
VIETNAM all others
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II29). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-29. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 52
II-30c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
VIETNAM all others
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-31.
Page 53
Subject multi-stenciled and mechanical tubing from Vietnam all others.--Circular welded pipe
may be multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for
purposes of these investigations, such pipe is considered to be “circular welded pipe” if it is 32
feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized
and/or painted surface finish; or has a threaded and/or coupled end finish; see definitions in
the instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical
tubing specifications (for purposes of these investigations, such pipe is considered to be
“circular welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard,
structural, fence, or sprinkler pipe). Please report these imports in the following table only if
they were reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Vietnam all others1
Quantity
Value
In-scope mechanical tubing from
Vietnam all others1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-29.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-32.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Vietnam all others for the 12-month period of October 2014 through September 2015 specified
below.
Actual imports
Item
Overall U.S. imports from Vietnam all others
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-33.
Page 54
IMPORTS FROM CANADA.–Report your firm’s imports and your firm’s shipments and inventories
of circular welded pipe imported from Canada by your firm during the specified periods.
CANADA
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-33.
Page 55
IMPORTS FROM CANADA.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 56
II-34a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
CANADA
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-33. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-33. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 57
II-34b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
CANADA
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II33). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-33. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 58
II-34c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
CANADA
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-35.
Page 59
Subject multi-stenciled and mechanical tubing from Canada.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Canada1
Quantity
Value
In-scope mechanical tubing from
Canada1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-33.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-36.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Canada for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from Canada
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-37.
Page 60
IMPORTS FROM MEXICO.–Report your firm’s imports and your firm’s shipments and inventories
of circular welded pipe imported from Mexico by your firm during the specified periods.
MEXICO
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-37.
Page 61
IMPORTS FROM MEXICO.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 62
II-38a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
MEXICO
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-37. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-37. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 63
II-38b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
MEXICO
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II37). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-37. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 64
II-38c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
MEXICO
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-39.
Page 65
Subject multi-stenciled and mechanical tubing from Mexico.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Mexico1
Quantity
Value
In-scope mechanical tubing from
Mexico1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-37.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-40.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from
Mexico for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from Mexico
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-41.
Page 66
IMPORTS FROM KOREA.–Report your firm’s imports and your firm’s shipments and inventories
of circular welded pipe imported from Korea by your firm during the specified periods.
KOREA
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-41.
Page 67
IMPORTS FROM KOREA.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 68
II-42a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
KOREA
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-41. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-41. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 69
II-42b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
KOREA
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II41). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-41. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 70
II-42c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
KOREA
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-43.
Page 71
Subject multi-stenciled and mechanical tubing from Korea.--Circular welded pipe may be
multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for purposes of
these investigations, such pipe is considered to be “circular welded pipe” if it is 32 feet in
length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized and/or
painted surface finish; or has a threaded and/or coupled end finish; see definitions in the
instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical tubing
specifications (for purposes of these investigations, such pipe is considered to be “circular
welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard, structural,
fence, or sprinkler pipe). Please report these imports in the following table only if they were
reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from Korea1
Quantity
Value
In-scope mechanical tubing from
Korea1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-41.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-44.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from Korea
for the 12-month period of October 2014 through September 2015 specified below.
Actual imports
Item
Overall U.S. imports from Korea
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-45.
Page 72
IMPORTS FROM ALL OTHER SOURCES.–Report your firm’s imports and your firm’s shipments
and inventories of circular welded pipe imported from all other sources combined (all sources
except Canada, Korea, Mexico, Oman, Pakistan, the UAE, or Vietnam) by your firm during the
specified periods.
ALL OTHER SOURCES (AOS)
)
(list sources:
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
Beginning-of-period inventories
(quantity) (A)
Imports:1
Quantity (B)
Value (C)
U.S. shipments:
Commercial shipments2:
Quantity (D)
Value (E)
Internal consumption/
company transfers:
Quantity (F)
Value3 (G)
Export shipments:4
Quantity (H)
Value (I)
End-of-period inventories
(quantity) (J)
Channels of distribution:
Commercial U.S. shipments:
To distributors (quantity) (K)
To end users (quantity) (L)
To retailers (quantity) (M)
1
Please identify the foreign producers, if known:
.
Please estimate the share of your firm’s commercial U.S. shipments in 2015 that were certified as lead-free under the
Safe Drinking Water Act:
percent.
3
Sales to related firms (including internal consumption) must be valued at fair market value. In the event that your firm
uses a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and
provide value data using that basis for each of the periods noted above:
.
4
Identify your firm’s principal export markets:
.
2
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-45.
Page 73
IMPORTS FROM ALL OTHER SOURCES.–Continued
RECONCILIATION OF SHIPMENTS, IMPORTS, AND INVENTORIES.--Generally, the data reported for the
end-of-period inventories (i.e., line J) should be equal to the beginning-of-period inventories (i.e., line A),
plus imports (i.e., line B), less total shipments (i.e., lines D, F, and H). Please ensure that any differences
are not due to data entry errors in completing this form, but rather actually reflect your firm’s records;
and also provide any likely explanations for any differences (e.g., theft, loss, damage, record systems
issues, etc.) if they exist.
Calendar years
Reconciliation
2013
2014
A + B – D – F – H – J = should equal zero
("0") or provide an explanation.1
0
January-June
2015
0
2015
0
2016
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless
accurate:
.
RECONCILIATION OF CHANNELS.--Please ensure that the quantities reported for channels of distribution
(i.e., lines K , L, and M) in each time period equal the quantity reported for commercial U.S. commercial
shipments (i.e., line D) in each time period. If the calculated fields below return values other than zero
(i.e., “0”), the data reported must be revised prior to submission to the Commission.
Calendar years
Reconciliation item
K + L + M – D = zero ("0"), if not
revise.
2013
2014
0
January-June
2015
0
2015
0
2016
0
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 74
II-46a. U.S. shipments by nominal pipe size and wall thickness.—Please report the quantity (in short
tons) and value (in $1,000) of your firms' U.S. shipments (i.e., inclusive of commercial U.S.
shipments, internal consumption, and transfers to related firms) of circular welded pipe in 2015
by nominal pipe size ("NPS") and wall thickness.
ALL OTHER SOURCES
Calendar year 2015
Wall thickness (down) and
diameter thickness (across)
NPS ⅛
NPS 2 ½
NPS 4
NPS 9
through NPS through NPS through NPS through NPS
2
3½
8
16
Total
Quantity (short tons); Value ($1,000)
Schedule 5s and 5.-Quantity
0
Value
0
Schedule 10s and 10.-Quantity
0
Value
0
Schedules 20, 30, 40s, and 40.-Quantity
0
Value
0
All other wall thicknesses.-Quantity
0
Value
0
Total.-Quantity
0
0
0
0
0
Value
0
0
0
0
0
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity and total value reported for
U.S. shipment in 2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F for
quantity; and lines E and G for value) in 2015 in question II-45. The following reconciliation sums the
total quantity and the total value in this grid and subtracts out the reported data from question II-45. If
the calculated fields below return values other than zero (i.e., “0”), the data reported must be revised
prior to submission to the Commission.
Reconciliation
2015
Quantity reconciliation, should = zero ("0"), if not
revise
0
Value reconciliation, should = zero ("0"), if not
revise
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 75
II-46b. U.S. shipments by production standard/stenciling.—Please report the quantity (in short tons)
of your firms' U.S. shipments (i.e., inclusive of commercial U.S. shipments, internal consumption,
and transfers to related firms) of circular welded pipe in 2015 by production standard/stenciling.
ALL OTHER SOURCES
Calendar year 2015
U.S. shipments by Production standard/ stenciling
Quantity (short tons)
Produced to single standard/ single stenciled.—
ASTM A53 (X)
ASTM A135/A795 (Y)
ASTM A500/A252 (Z)
ASTM A513 (AA)
ASTM A252
In-scope fence tubing standards1
Other standards, proprietary or otherwise2
Produced to multiple standards/ multi-stenciled3
No standard4
Total U.S. shipments
0
1
These include WT40 and SS40.
Please list and described these standards in order of importance (i.e., involving the greatest
volume):
3
Please identify the most relevant (i.e., involving the greatest volume) multi-stencil combinations
reported by your firm:
4
Please these products
2
RECONCILIATION OF US SHIPMENTS.-- Please ensure that the total quantity reported for U.S. shipment in
2015 in this grid equal the quantity reported for U.S. shipments (i.e., lines D and F) in 2015 in question II45). The following reconciliation sum the total quantity and the total value in this grid and subtracts out
the reported data from question II-45. If the calculated fields below return values other than zero (i.e.,
“0”), the data reported must be revised prior to submission to the Commission.
Reconciliation
Quantity reconciliation, should = zero ("0"), if not
revise
2015
0
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 76
II-46c. Shipments by various additional attributes.—Please check all that apply to any portion of your
firms U.S. shipments in 2015.
ALL OTHER SOURCES
End finishes:
Plain end/ square cut
Beveled
Threaded
Threaded and coupled
Other end finishes (describe:
Surface finishes:
Black
Painted
Galvanized
Other surface finishes (describe:
)
)
Lengths:
Single random lengths (approx. 20 feet)
Double random lengths (approx. 40 feet)
Triple random lengths (approx. 60 feet)
Quadruple random lengths (approx. 80 feet
Other lengths (describe:
)
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-47.
Page 77
Subject multi-stenciled and mechanical tubing from All other sources.--Circular welded pipe
may be multiple-stenciled to both ASTM and API specifications, such as API 5L or X-42 (for
purposes of these investigations, such pipe is considered to be “circular welded pipe” if it is 32
feet in length or less; is less than 2.0 inches (50 mm) in outside diameter; has a galvanized
and/or painted surface finish; or has a threaded and/or coupled end finish; see definitions in
the instruction booklet.). Circular welded pipe may also be certified to ASTM mechanical
tubing specifications (for purposes of these investigations, such pipe is considered to be
“circular welded pipe” if it meets the standard sizes, O.D., and wall thickness of standard,
structural, fence, or sprinkler pipe). Please report these imports in the following table only if
they were reported to U.S. Customs under HTSUS statistical reporting numbers other than
7306.30.1000, 7306.30.5025, 7306.30.5032, 7306.30.5040, 7306.30.5055, 7306.30.5085, and
7306.30.5090. (Primary HTS statistical reporting numbers.)
Quantity (in short tons), value (in $1,000)
Calendar years
Item
2013
2014
January-June
2015
2015
2016
In-scope multiple-stenciled
imports from All other sources1
Quantity
Value
In-scope mechanical tubing from
All other sources1, 2
Quantity
Value
1
Please ensure these goods are reported in data in question II-45.
While the data reported in this grid relates to only a subset of all mechanical tubing, your firm may also import other
mechanical tubing whether in-scope or out-of-scope in relation to these investigations. For calendar year 2015 please
provide the total quantity of your firm’s imports of all mechanical tubing regardless of whether they are in-scope or out-ofscope merchandise in these investigations:
short tons.
2
II-48.
Imports preceding the petition.—Report your firm’s imports of circular welded pipe from All
other sources for the 12-month period of October 2014 through September 2015 specified
below.
Actual imports
Item
Overall U.S. imports from All other sources
In-scope U.S. imports of multiple-stenciled
and/or mechanical tubing not reported in
the primary HTS statistical reporting
numbers. (A subset of the first line.)
Oct 2014 –
Sept 2015
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
II-49.
Page 78
Other explanations.—If your firm would like to further explain a response to a question in Part II
that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 79
PART III.--PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Lauren Gamache (202-2053489, lauren.gamache@usitc.gov).
III-1.
Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax
PRICE DATA
III-2.
(a)
This question requests quarterly quantity and value data for your firm’s commercial
shipments to unrelated U.S. customers since January 1, 2013 of the following products your firm
imported from Oman, Pakistan, the UAE, and/or Vietnam:
Product 1.—ASTM A-53 schedule 40 black plain-end, with nominal outside diameter of 2-4
inches inclusive;
Product 2.—ASTM A-53 schedule 40 galvanized plain-end, with nominal outside diameter of 2-4
inches inclusive;
Product 3.-- ASTM A-53 schedule 40 black plain-end, with nominal outside diameter of 6-8
inches inclusive; and
Product 4.-- Schedule 40 galvanized fence tube, with nominal outside diameter of 1-1/4 – 3
inches, inclusive.
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.-inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2013-June 2016, did your firm import from Oman, Pakistan, the UAE, and/or
Vietnam and sell to unrelated U.S. customers any of the above listed products (or any products
that were competitive with these products)?
Yes.--Please complete the following pricing data table(s) as appropriate.
No.--Skip to question III-3.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 80
III-2a. Price data.--Report below the quarterly price data1 for pricing products2 imported from Oman
and sold by your firm to distributors and service centers.
Oman
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Quantity
Value
Period of shipment
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 81
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Oman
and sold by your firm to end users.
Oman
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 82
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Oman
and sold by your firm to retailers.
Oman
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 83
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Pakistan
and sold by your firm to distributors and service centers.
Pakistan
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 84
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Pakistan
and sold by your firm to end users.
Pakistan
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 85
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Pakistan
and sold by your firm to retailers.
Pakistan
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 86
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from the UAE
and sold by your firm to distributors and service centers.
THE UAE
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 87
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from the UAE
and sold by your firm to end users.
THE UAE
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 88
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from the UAE
and sold by your firm to retailers.
THE UAE
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 89
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(SeAH) and sold by your firm to distributors and service centers.
Vietnam (SeAH)
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 90
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(SeAH) and sold by your firm to end users.
Vietnam (SeAH)
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 91
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(SeAH) and sold by your firm to retailers.
Vietnam (SeAH)
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 92
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hongyuan) and sold by your firm to distributors and service centers.
Vietnam (Hongyuan)
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 93
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hongyuan) and sold by your firm to end users.
Vietnam (Hongyuan)
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 94
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hongyuan) and sold by your firm to retailers.
Vietnam (Hongyuan)
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 95
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hoa Phat) and sold by your firm to distributors and service centers.
Vietnam (Hoa Phat)
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 96
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hoa Phat) and sold by your firm to end users.
Vietnam (Hoa Phat)
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 97
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(Hoa Phat) and sold by your firm to retailers.
Vietnam (Hoa Phat)
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 98
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(all other sources) and sold by your firm to distributors and service centers.
Vietnam (all other sources)
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 99
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(all other sources) and sold by your firm to end users.
Vietnam (all other sources)
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 100
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Vietnam
(all other sources) and sold by your firm to retailers.
Vietnam (all other sources)
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 101
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Korea
and sold by your firm to distributors and service centers.
Korea
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 102
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Korea
and sold by your firm to end users.
Korea
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 103
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from Korea
and sold by your firm to retailers.
Korea
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 104
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from all other
sources and sold by your firm to distributors and service centers.
All other sources
Sales to distributors and service centers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 105
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from all other
sources and sold by your firm to end users.
All other sources
Sales to end users
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 106
III-2a. Continued.--Report below the quarterly price data1 for pricing products2 imported from all other
sources and sold by your firm to retailers.
All other sources
Sales to retailers
Report data in actual short tons and actual dollars (not 1,000s).
Product 1
Quantity
Value
(Quantity in short tons, value in dollars)
Product 2
Product 3
Quantity
Value
Quantity
Value
Product 4
Period of shipment
Quantity
Value
2013:
January-March
April-June
July-September
OctoberDecember
2014:
January-March
April-June
July-September
OctoberDecember
2015:
January-March
April-June
July-September
OctoberDecember
2016:
January-March
April-June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your firm’s U.S.
point of shipment.
2
Pricing product definitions are provided on the first page of Part III.
Note.--If your firm’s product does not exactly meet the product specifications but is competitive with the specified product, provide a description of
your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
(b)
No
Page 107
Does your firm import pricing product 4 (“Schedule 40 galvanized fence tube, with nominal
outside diameter of 1-1/4 – 3 inches, inclusive”) produced to ATSM standards?
Yes
If yes, provide the estimated
share of commercial
shipments produced to
ATSM standards in 2015
%
Please list the relevant ATSM standards
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records used in
the preparation of the price data, as Commission staff may contact your firm regarding questions on the
price data. The Commission may also request that your company submit copies of the supporting
documents/records (such as sales journal, invoices, etc.) used to compile these data.
Pricing data methodology.—Please describe the method and the kinds of documents/records
that were used to compile your price data.
III-3.
Price setting.-- How does your firm determine the prices that it charges for sales of circular
welded pipe (check all that apply)? If your firm issues price lists, please submit sample pages of
a recent list.
Transaction
by
transaction
III-4.
Contracts
Set
price
lists
Other
If other, describe
Discount policy.-- Please indicate and describe your firm’s discount policies (check all that
apply).
Quantity
discounts
Annual
total
volume
discounts
No
discount
policy
Other
Describe
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
III-5.
Pricing terms.-(a)
What are your firm’s typical sales terms for circular welded pipe imported from Oman,
Pakistan, the UAE, and/or Vietnam?
Net 30 days
(b)
Net 60
days
2/10 net 30
days
Other
Other (specify)
On what basis are your firm’s prices of imported circular welded pipe from Oman,
Pakistan, the UAE, and/or Vietnam usually quoted (check one)?
Delivered
III-6.
Page 108
F.o.b.
If f.o.b., specify point
Contract versus spot.--Approximately what share of your firm’s sales of circular welded pipe
imported from Oman, Pakistan, the UAE, and/or Vietnam in 2015 was on a (1) long-term
contract basis, (2) annual contract basis, (3) short-term contract basis, and (4) spot sales basis?
Long-term
contracts
(multiple
deliveries for
more than 12
months)
Share of 2015
sales
%
Type of sale
Short-term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
less than 12
months)
months)
%
Total
(should
sum to
100.0%)
Spot sales
(for a single
delivery)
%
%
0.0
%
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
III-7.
Page 109
Contract provisions.— Please fill out the table regarding your firm’s typical sales contracts for
circular welded pipe from Oman, Pakistan, the UAE, and/or Vietnam (or check “not applicable” if
your firm does not sell on a long-term, short-term and/or annual contract basis).
Typical sales
contract provisions
Item
Average contract
duration
No. of
days
Price renegotiation
(during contract
period)
Yes
Short-term
contracts
(multiple deliveries
for less than 12
months)
Annual contracts
(multiple deliveries
for 12 months)
Long-term contracts
(multiple deliveries for
more than 12 months)
365
No
Quantity
Fixed quantity
and/or price
Price
Both
Meet or release
provision
Yes
Indexed to raw
material costs
Yes1
No
No
Not applicable
1
Please provide an explanation of the indexing mechanism and relevant raw materials:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
III-8.
Page 110
Lead times.--What is your firm’s share of sales of circular welded pipe imported from Oman,
Pakistan, the UAE, and/or Vietnam from inventory and produced to order and what is the typical
lead time between a customer’s order and the date of delivery for your firm’s sales of circular
welded pipe?
Source
Lead time (average
Share of 2015 sales number of days)
From your firm’s U.S. inventory
%
From foreign manufacturers’ inventory
%
Produced to order
%
Total (should sum to 100.0%)
III-9.
0.0 %
Shipping information.—
(a)
What is the approximate percentage of the total delivered cost of circular welded pipe
imported from Oman, Pakistan, the UAE, and/or Vietnam that is accounted for by U.S.
inland transportation costs?
percent.
(b)
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm
Purchaser (check one)
(c)
When your firm sells circular welded pipe imported from Oman, Pakistan, the UAE,
and/or Vietnam, from where is it shipped?
Point of importation
Storage facility (check one)
(d)
Indicate the approximate percentage of your firm’s sales of circular welded pipe
imported from Oman, Pakistan, the UAE, and/or Vietnam that are delivered the
following distances from your firm’s U.S. point of shipment.
Distance from your firm’s U.S. point of shipment
Share
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
0.0
%
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 111
III-10. Geographical shipments.--In which U.S. geographic market area(s) has your firm sold circular
welded pipe imported from subject countries since January 1, 2013 (check all that apply)?
Geographic area
Oman
Pakistan
UAE
Vietnam
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and
VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH,
SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC,
SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and
WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not
previously listed, including AK, HI, PR, and VI.
III-11. End uses.--List the end uses of the circular welded pipe that your firm imports from Oman,
Pakistan, the UAE, or Vietnam. For each end-use product, what percentage of the total cost is
accounted for by circular welded pipe and other inputs?
Share of total cost of end-use product
accounted for by
End use product
Circular welded pipe
Total
(should sum to
100.0% across)
Other inputs
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
III-12. Substitutes.-- Can other products be substituted for circular welded pipe?
No
Substitute
1.
2.
3.
Yes--Please fill out the table.
End use in which this
substitute is used
Have changes in the price of this substitute
affected the price for circular welded pipe?
No Yes
Explanation
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 112
III-13. Demand trends.-(a)
Indicate how demand within the United States and outside of the United States (if
known) for circular welded pipe has changed since January 1, 2013. Explain any trends
and describe the principal factors that have affected these changes in demand.
Overall
increase
Market
No
Overall Fluctuate with
change decrease no clear trend
Explanation and factors
Within
the United
States
Outside
the United
States
(b)
What effects, if any, do the prices of gas and oil have on demand for and price of circular
welded pipe?
III-14. Product changes.--Have there been any significant changes in the product range, product mix or
marketing of circular welded pipe since January 1, 2013?
No
Yes
If yes, please describe.
III-15. Conditions of competition.—
(a) Is the circular welded pipe market subject to business cycles (other than general economywide conditions) and/or other conditions of competition distinctive to circular welded pipe?
Check all that apply.
No
Yes-Business cycles (e.g.
seasonal business)
Yes-Other distinctive
conditions of competition
Please describe.
Skip to question III-16.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 113
(b) If yes, have there been any changes in the business cycles or conditions of competition for
circular welded pipe since January 1, 2013?
No
Yes
If yes, describe.
III-16. Impact of Allied.-- Did U.S. producer Allied’s exit from the market affect U.S. prices for circular
welded pipe?
No
Yes
If yes, describe the effects.
III-17. Supply constraints.--Has your firm refused, declined, or been unable to supply circular welded
pipe since January 1, 2013 (examples include placing customers on allocation or “controlled
order entry,” declining to accept new customers or renew existing customers, delivering less
than the quantity promised, been unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
III-18. Raw materials.-- How have circular welded pipe raw material prices changed since January 1,
2013?
Fluctuate
Explain, noting how raw material price changes
Overall
No
Overall
with no
have affected your firm’s selling prices for circular
increase change decrease clear trend
welded pipe.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 114
III-19. Interchangeability.--Is circular welded pipe produced in the United States and in other countries
interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country-pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country-pair
Countrypair
Oman
Pakistan
UAE
Vietnam
Korea
All other
countries
United
States
Oman
Pakistan
UAE
Vietnam
Korea
For any country-pair producing circular welded pipe which is sometimes or never
interchangeable, please identify the country-pair and explain the factors that limit or preclude
interchangeable use:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 115
III-20. Factors other than price.--Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between circular welded pipe
produced in the United States and in other countries a significant factor in your firm’s sales of
the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country-pair
Countrypair
Oman
Pakistan
UAE
Vietnam
Korea
All other
countries
United
States
Oman
Pakistan
UAE
Vietnam
Korea
For any country-pair for which factors other than price always or frequently are a significant
factor in your firm’s purchases of circular welded pipe, identify the country-pair and report
the advantages or disadvantages imparted by such factors:
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 116
III-21. Customer identification.--List the names and contact information for your firm’s 10 largest U.S.
customers for circular welded pipe since January 1, 2013. Indicate the share of the quantity of
your firm’s total shipments of circular welded pipe that each of these customers accounted for
in 2016.
Customer’s name
City
State
Share of 2015
sales (%)
1
2
3
4
5
6
7
8
9
10
III-22. Other explanations.--If your firm would like to further explain a response to a question in Part III
that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Importers’ Questionnaire – Circular Welded Pipe
Page 117
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
https://www.usitc.gov/investigations/701731/2016/circular_welded_carbon_quality_st
eel_pipe_oman/final.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: CWP4
• E-mail.—E-mail the MS Word questionnaire to jordan.harriman@usitc.gov; include a scanned copy of
the signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic
documents that are electronically transmitted to the Commission to protect your sensitive information
from unauthorized disclosure. The USITC secure drop-box system and the Electronic Document
Information System (EDIS) use Federal Information Processing Standards (FIPS) 140-2 cryptographic
algorithms to encrypt data in transit. Submitting your nonpublic documents by a means that does not
use these encryption algorithms (such as by email) may subject your firm’s nonpublic information to
unauthorized disclosure during transmission. If you choose a non-encrypted method of electronic
transmission, the Commission warns you that the risk of such possible unauthorized disclosure is
assumed by you and not by the Commission.
If your firm did not import this product, please fill out page 1, print, sign, and submit a scanned copy to
the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
| File Type | application/pdf |
| File Title | US importer questionnaire |
| Subject | Title 7 investigations |
| Author | Szustakowski, Michael |
| File Modified | 2016-06-30 |
| File Created | 2016-06-30 |