16-4-3471 Foreign Producers'/Exporters' Questionnaire

OMB No. 3117-0016/USITC No. 16-4-3471; Expiration Date: 6/30/2017
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
CERTAIN COLD-ROLLED STEEL PRODUCTS
This questionnaire must be received by the Commission by April 7, 2016
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning cold-rolled steel from Brazil,
China, India, Japan, Korea, Russia, and the United Kingdom (Inv. Nos. 701-TA-540-544 and 731-TA-1283-1287
and 1289-1290 Final)). The information requested in the questionnaire is requested under the authority of the
Tariff Act of 1930, title VII.
Name of firm
Address
Website
Has your firm produced or exported cold-rolled steel (as defined on next page) at any time since January 1, 2013?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)

Data reported in this questionnaire relate to (Check one):
BRAZIL
KOREA

CHINA

RUSSIA

INDIA

UNITED KINGDOM

JAPAN

Return questionnaire via the Commission Drop Box by clicking on the following link:
https://dropbox.usitc.gov/oinv/. (PIN: COLD)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission.By
means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I, the undersigned, acknowledge that information submitted in response to this request for information and throughout this
proceeding or other proceeding may be disclosed to and used: (i) by the Commission, its employees and Offices, and contract
personnel (a) for developing or maintaining the records of this or a related proceeding, or (b) in internal investigations, audits,
reviews, and evaluations relating to the programs, personnel, and operations of the Commission including under 5 U.S.C.
Appendix 3; or (ii) by U.S. government employees and contract personnel, solely for cybersecurity purposes. I understand that all
contract personnel will sign appropriate nondisclosure agreements
Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Fax:

Email address

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 2

PART I.—GENERAL INFORMATION
Background. This proceeding was instituted in response to a petition filed on July 28, 2015, by AK Steel
Corporation (West Chester, OH), ArcelorMittal USA LLC (Chicago, IL), Nucor Corporation (Charlotte, NC), Steel
Dynamics, Inc. (Fort Wayne, IN), and United States Steel Corporation (Pittsburgh, PA). Countervailing and/or
antidumping duties may be assessed on the subject imports as a result of these proceedings if the Commission
makes an affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce makes an affirmative determination of subsidization and/or dumping. Questionnaires and other
information pertinent to this proceeding are available at
https://www.usitc.gov/investigations/701731/2015/cold_rolled_steel_products_brazil_china_india/final.htm
Certain cold-rolled steel products (“cold-rolled steel”).-- The products covered by these investigations
are certain cold-rolled (cold-reduced), flat-rolled steel products, whether or not annealed, painted,
varnished, or coated with plastics or other non-metallic substances. The products covered do not
include those that are clad, plated, or coated with metal. The products covered include coils that have a
width or other lateral measurement (‘‘width’’) of 12.7 mm or greater, regardless of form of coil (e.g., in
successively superimposed layers, spirally oscillating, etc.). The products covered also include products
not in coils (e.g., in straight lengths) of a thickness less than 4.75 mm and a width that is 12.7 mm or
greater and that measures at least 10 times the thickness. The products covered also include products
not in coils (e.g., in straight lengths) of a thickness of 4.75 mm or more and a width exceeding 150 mm
and measuring at least twice the thickness. The products described above may be rectangular, square,
circular, or other shape and include products of either rectangular or non-rectangular cross-section
where such cross-section is achieved subsequent to the rolling process, i.e., products which have been
‘‘worked after rolling’’ (e.g., products which have been beveled or rounded at the edges). For purposes
of the width and thickness requirements referenced above:
(1) Where the nominal and actual measurements vary, a product is within the scope if application
of either the nominal or actual measurement would place it within the scope based on the
definitions set forth above, and
(2) Where the width and thickness vary for a specific product (e.g., the thickness of certain products
with non-rectangular cross-section, the width of certain products with non-rectangular shape,
etc.), the measurement at its greatest width or thickness applies.
Steel products included in the scope of this proceeding are products in which: (1) Iron predominates, by
weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by
weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively
indicated:
•
•
•
•
•
•
•
•
•
•
•
•
•

2.50 percent of manganese, or
3.30 percent of silicon, or
1.50 percent of copper, or
1.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
2.00 percent of nickel, or
0.30 percent of tungsten (also called wolfram), or
0.80 percent of molybdenum, or
0.10 percent of niobium (also called columbium), or
0.30 percent of vanadium, or
0.30 percent of zirconium.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 3

Unless specifically excluded, products are included in this scope regardless of levels of boron and
titanium.
For example, specifically included in this scope are vacuum degassed, fully stabilized (commonly
referred to as interstitial-free (IF)) steels, high strength low alloy (HSLA) steels, motor lamination steels,
Advanced High Strength Steels (AHSS), and Ultra High Strength Steels (UHSS). IF steels are recognized as
low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to
stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of
elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. Motor lamination
steels contain micro-alloying levels of elements such as silicon and aluminum. AHSS and UHSS are
considered high tensile strength and high elongation steels, although AHSS and UHSS are covered
whether or not they are high tensile strength or high elongation steels.
Subject merchandise includes cold-rolled steel that has been further processed in a third country,
including but not limited to annealing, tempering, painting, varnishing, trimming, cutting, punching,
and/or slitting, or any other processing that would not otherwise remove the merchandise from the
scope of the investigation if performed in the country of manufacture of the cold-rolled steel.
All products that meet the written physical description, and in which the chemistry quantities do not
exceed any one of the noted element levels listed above, are within the scope of this proceeding unless
specifically excluded. The following products are outside of and/or specifically excluded from the scope
of this proceeding:
• Ball bearing steels;1
• Tool steels;2
• Silico-manganese steel;3
• Grain-oriented electrical steels (GOES).4
• Non-Oriented Electrical Steels (NOES).5
1

Ball bearing steels are defined as steels which contain, in addition to iron, each of the following elements by
weight in the amount specified: (i) Not less than 0.95 nor more than 1.13 percent of carbon; (ii) not less than 0.22
nor more than 0.48 percent of manganese; (iii) none, or not more than 0.03 percent of sulfur; (iv) none, or not
more than 0.03 percent of phosphorus; (v) not less than 0.18 nor more than 0.37 percent of silicon; (vi) not less
than 1.25 nor more than 1.65 percent of chromium; (vii) none, or not more than 0.28 percent of nickel; (viii) none,
or not more than 0.38 percent of copper; and (ix) none, or not more than 0.09 percent of molybdenum.
2
Tool steels are defined as steels which contain the following combinations of elements in the quantity by weight
respectively indicated: (i) More than 1.2 percent carbon and more than 10.5 percent chromium; or (ii) not less
than 0.3 percent carbon and 1.25 percent or more but less than 10.5 percent chromium; or (iii) not less than 0.85
percent carbon and 1 percent to 1.8 percent, inclusive, manganese; or (iv) 0.9 percent to 1.2 percent, inclusive,
chromium and 0.9 percent to 1.4 percent, inclusive, molybdenum; or (v) not less than 0.5 percent carbon and not
less than 3.5 percent molybdenum; or (vi) not less than 0.5 percent carbon and not less than 5.5 percent tungsten.
3
Silico-manganese steel is defined as steels containing by weight: (i) Not more than 0.7 percent of carbon; (ii) 0.5
percent or more but not more than 1.9 percent of manganese, and (iii) 0.6 percent or more but not more than 2.3
percent of silicon.
4
As defined in the final determination of the U.S. Department of Commerce in Grain-Oriented Electrical Steel from
Germany, Japan, and Poland: Final Determinations of Sales at Less Than Fair Value and Certain Final Affirmative
Determination of Critical Circumstances, 79 FR 42501, July 22, 2014. This determination defines grain-oriented
electrical steel as ‘‘a flat-rolled alloy steel product containing by weight at least 0.6 percent but not more than 6
percent of silicon, not more than 0.08 percent of carbon, not more than 1.0 percent of aluminum, and no other
element in an amount that would give the steel the characteristics of another alloy steel, in coils or in straight
lengths.’’
5
As defined in the antidumping orders issued by the U.S. Department of Commerce in Non-Oriented Electrical
Steel From the People’s Republic of China, Germany, Japan, the Republic of Korea, Sweden, and Taiwan:
Antidumping Duty Orders, 79 FR 71741, December 3, 2014. The orders define NOES as ‘‘cold-rolled, flat-rolled,

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 4

The products subject to this proceeding are currently imported under the following Harmonized Tariff
Schedule of the United States (HTSUS) provisions: 7209.15.0000, 7209.16.0030, 7209.16.0060,
7209.16.0070, 7209.16.0091, 7209.17.0030, 7209.17.0060, 7209.17.0070, 7209.17.0091, 7209.18.1530,
7209.18.1560, 7209.18.2510, 7209.18.2520, 7209.18.2580, 7209.18.6020, 7209.18.6090, 7209.25.0000,
7209.26.0000, 7209.27.0000, 7209.28.0000, 7209.90.0000, 7210.70.3000, 7211.23.1500, 7211.23.2000,
7211.23.3000, 7211.23.4500, 7211.23.6030, 7211.23.6060, 7211.23.6075, 7211.23.6085, 7211.29.2030,
7211.29.2090, 7211.29.4500, 7211.29.6030, 7211.29.6080, 7211.90.0000, 7212.40.1000, 7212.40.5000,
7225.50.6000, 7225.50.8015, 7225.50.8085, 7225.99.0090, 7226.92.5000, 7226.92.7050, and
7226.92.8050.6
Reporting of information.-- If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
purchaser and/or foreign producer questionnaire), you need not respond to duplicated questions.
Confidentiality.--The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. §1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.--The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Release of information.--The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import-injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
alloy steel products, whether or not in coils, regardless of width, having an actual thickness of 0.20 mm or more, in
which the core loss is substantially equal in any direction of magnetization in the plane of the material. The term
‘substantially equal’ means that the cross grain direction of core loss is no more than 1.5 times the straight grain
direction (i.e., the rolling direction) of core loss. NOES has a magnetic permeability that does not exceed 1.65 Tesla
when tested at a field of 800 A/m (equivalent to 10 Oersteds) along (i.e., parallel to) the rolling direction of the
sheet (i.e., B800 value). NOES contains by weight more than 1.00 percent of silicon but less than 3.5 percent of
silicon, not more than 0.08 percent of carbon, and not more than 1.5 percent of aluminum. NOES has a surface
oxide coating, to which an insulation coating may be applied.’’
6
The products subject to this proceeding may also be imported under the following HTSUS provisions:
7210.90.9000, 7212.50.0000, 7215.10.0010, 7215.10.0080, 7215.50.0016, 7215.50.0018, 7215.50.0020,
7215.50.0061, 7215.50.0063, 7215.50.0065, 7215.50.0090, 7215.90.5000, 7217.10.1000, 7217.10.2000,
7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.19.0000,
7226.19.1000, 7226.19.9000, 7226.99.0180, 7228.50.5015, 7228.50.5040, 7228.50.5070, 7228.60.8000, and
7229.90.1000.
The HTSUS subheadings above are provided for convenience and U.S. Customs purposes only. The written
description of the scope of this proceeding is dispositive.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
I-1.

Page 5

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours

Dollars

The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
20 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I-2.

Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire. If your firm is publicly traded, please specify the stock exchange and trading
symbol.
“Establishment”-- Each facility of a firm in Brazil, China, India, Japan, Korea, Russia, and the
United Kingdom involved in the production or export of cold-rolled steel, including auxiliary
facilities operated in conjunction with (whether or not physically separate from) such facilities.
Firms operating more than one establishment in Brazil, China, India, Japan, Korea, Russia, and
the United Kingdom should combine the data for all establishments into a single report.

I-3.

Related producers.--Does your firm or any related firm produce, have the capability to produce,
or have any plans to produce cold-rolled steel in the United States or other countries?
No

Yes--Please name the firm(s) and country(ies) below and, if U.S. producer(s),
ensure that they complete the Commission’s producer questionnaire.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
I-4.

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
cold-rolled steel into the United States?
No

I-5.

2

3

4

5

Yes--Please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire.

U.S. importers.--Please provide the names, street addresses (not P.O. boxes), contacts,
telephone numbers, and e-mail addresses of the FIVE largest U.S. importers of your firm’s coldrolled steel in 2015.

Importer’s name

1

Page 6

Contact
person

Email

Telephone

Street address (not
P.O. box), city, state,
and zip code

Street Address
,
City State Zip Code
Street Address
,
City State Zip Code
Street Address
,
City State Zip Code
Street Address
,
City State Zip Code
Street Address
,
City State Zip Code

Share of
your
firm’s
2015 U.S.
exports
(%)

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 7

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Nathanael Comly
(nathanael.comly@usitc.gov; 202-205-3174). Supply all data requested on a calendar-year basis.
II-1.

Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax

II-2.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of cold-rolled steel since January 1, 2013.
(check as many as appropriate)

plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)

(please describe, including the time period and volume
affected)

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
II-3.

Anticipated changes in operations.--Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of cold-rolled steel in
the future?
No

II-4a.

Page 8

Yes–Supply details as to the time, nature, and significance of such changes
and provide underlying assumptions, along with relevant portions of
business plans or other supporting documentation that address this
issue. Include in the response a specific projection of your firm’s
capacity to produce cold-rolled steel (in short tons) for 2016 and
2017.

Production using same machinery.-- Please report your firm’s production of products made on
the same equipment and machinery used to produce cold-rolled steel, and the combined
production capacity on this shared equipment and machinery.
“Overall production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” --All production in your establishment(s) in Brazil, China, India, Japan, Korea,
Russia, and the United Kingdom, including production consumed internally within your firm.
Quantity (in short tons)
Calendar years
Item

2013

2014

2015

Overall production capacity
Production of:
Hot-rolled steel1
Cold-rolled steel 2
Other products
Total

0

0

0

0

0

0

3

1

Not further processed into cold-rolled steel.
Data entered for production of cold-rolled steel will populate here once reported in question II-10.
3
Please identify these products:
.
2

II-4b.

Operating parameters.--The production capacity reported in II-4a is based on operating
per week,
weeks per year.

hours

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 9

II-4c.

Capacity calculation.--Please describe the methodology used to calculate overall production
capacity reported in II-4a, and explain any changes in reported capacity.

II-4d.

Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.

II-4e.

Product shifting.—
(i).

Is your firm able to switch production (capacity) between cold-rolled steel and other
products using the same equipment and/or labor?
No

(ii).

Yes-- (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products:
.

Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.

II-5.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of cold-rolled steel?
percent.

II-6.

Firm's estimated share of production in Brazil, China, India, Japan, Korea, Russia, and the United
Kingdom.--Please estimate the percentage of total production of cold-rolled steel in the country
specified on the certification page accounted for by your firm’s production in 2015.
percent.

II-7.

Firm's estimated share of country's exports.--Please estimate the percentage of total exports to
the United States of cold-rolled steel from the country specified on the certification page
accounted for by your firm’s exports in 2015.
percent.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
II-8.

Page 10

Inventories in the United States.--Has your firm, since 2013, maintained any inventories of coldrolled steel in the United States (not including inventories held by firms identified in question
I-3)?
“Inventories”--Finished goods inventory, not raw materials or work in progress.
No

Yes--Report the quantity of such end-of-period inventories below.
Quantity (in short tons)
Calendar year
Item

2013

2014

2015

Inventory
II-9.

Third country trade actions.--Is the cold-rolled steel exported by your firm subject to
antidumping/countervailing duty/safeguard findings, remedies, or proceedings?
No

Yes--List the products(s), countries affected, and the date of such
findings/remedies/proceedings.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
II-10.

Page 11

Trade data for cold-rolled steel producers.--Report your firm’s production capacity, production,
shipments, and inventories related to the production of cold-rolled steel in your
establishment(s) in Brazil, China, India, Japan, Korea, Russia, and the United Kingdom during the
specified periods. Do not include resales of cold rolled steel that your firm did not produce;
those data to the degree they are exported to the United States should only be reported in
question II-11.
Do not submit data by manufacturing facility if they are in the same country. If your firm has
multiple manufacturing establishments within one country, you are required to combine data
for those establishments within one foreign producer questionnaire response.
Do not submit data on multiple countries combined. The establishments reported here should
all be located in the country of the firm’s address reported on the certification page.
Multinational companies with production in multiple subject countries should submit separate
foreign producer questionnaire responses for each subject country.
“Average production capacity” or “capacity” –The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods for all
products manufactured in that establishment using the same manufacturing equipment.
Assume normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” --All production in your establishment(s) in Brazil, China, India, Japan, Korea,
Russia, and the United Kingdom, including production consumed internally within your firm.
“Shipments”--Shipments of products produced in your establishment(s) in Brazil, China, India,
Japan, Korea, Russia, and the United Kingdom. Quantities
reported should be net of returns.
“Home market commercial shipments”--Shipments, other than internal consumption and
transfers to related firms, within Brazil, China, India, Japan, Korea, Russia, and the United
Kingdom.
“Home market internal consumption/transfers to related firms”--Shipments made to
related firms in Brazil, China, India, Japan, Korea, Russia, or the United Kingdom, including
product consumed internally by your firm.
“Export shipments”--Shipments to destinations outside the country listed on page 1 (i.e. Brazil,
China, India, Japan, Korea, Russia, or the United Kingdom), including shipments to related firms.
“Inventories”--Finished goods inventory, not raw materials or work-in-progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
II-10.

Page 12

Trade data--Continued.
Quantity (in short tons)

Item

Actual experience

Projections1

Calendar year

Calendar year

2013

2014

2015

2016

2017

2

Average production capacity (A)
Beginning-of-period inventories
(B)
Production (C)
Home market shipments:
Internal consumption/
transfers (D)
Commercial shipments (E)3
Exports to the United States (F)
Exports to all other markets4 (G)
Total exports (H)
(should equal F+G)

0

0

0

0

0

Total shipments (I)
(should equal D+E+F+G)

0

0

0

0

0

End-of-period inventories (J)
1

Please explain the basis for your firm’s projections.
.
The production capacity reported is based on operating
hours per week,
weeks per year. Please
describe the methodology used to calculate production capacity, and explain any changes in reported capacity.
.
4
Identify principal other export markets.
.
2

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)
II-10.

Page 13

Trade data.—Continued.
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.--Generally, the data reported
for the end-of-period inventories (i.e., line J) should be equal to the beginning-of-period
inventories (i.e., line B), plus production (i.e., line C), less total shipments (i.e., lines D, E, F, and
G). Please ensure that any differences are not due to data entry errors in completing this form,
but rather actually reflect your firm’s records; and also provide any likely explanations for any
differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.

Item

Actual experience

Projections

Calendar year

Calendar year

2013

2014

2015

2016

2017

B + C – D – E – F –G – J =
should equal zero ("0")
or provide an
explanation.1
0
0
0
0
1
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are
nonetheless accurate.
II-11.

0

Exports to the United States not produced by your firm.--Report your firm’s exports to the
United States of cold-rolled steel that was produced in Brazil, China, India, Japan, Korea, Russia,
and/or the United Kingdom but not by your firm during the specified periods.
Quantity (in short tons)

Item
Exports to the United States
1

2013

Actual experience

Projections1

Calendar year

Calendar year

2014

2015

2016

2017

1

List the producer(s).

II-12.

Other explanations.--If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.

.

Business Proprietary
Foreign Producers’ Questionnaire – Cold-Rolled Steel (Final)

Page 14

HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the Commission’s website at:
https://www.usitc.gov/investigations/701731/2015/cold_rolled_steel_products_brazil_china_india/final.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: COLD

• E-mail.—E-mail your questionnaire to nathanael.comly@usitc.gov; include a scanned copy of the
signed certification page (page 1). Submitters are strongly encouraged to encrypt nonpublic documents
that are electronically transmitted to the Commission to protect your sensitive information from
unauthorized disclosure. The USITC secure drop-box system and the Electronic Document Information
System (EDIS) use Federal Information Processing Standards (FIPS) 140-2 cryptographic algorithms to
encrypt data in transit. Submitting your nonpublic documents by a means that does not use these
encryption algorithms (such as by email) may subject your firm’s nonpublic information to unauthorized
disclosure during transmission. If you choose a non-encrypted method of electronic transmission, the
Commission warns you that the risk of such possible unauthorized disclosure is assumed by you and not
by the Commission.
If your firm did not produce or export this product, please fill out page 1, print, sign, and submit a
scanned copy to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, you are required to serve a copy of
the completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202205-1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.