Download:
pdf |
pdfOMB No. 3117‐0016/USITC No. 15‐1‐3368; Expiration Date: 6/30/2017
(No response is required if currently valid OMB control number is not displayed)
U.S. PRODUCERS’ QUESTIONNAIRE
CERTAIN WELDED LINE PIPE FROM KOREA AND TURKEY
This questionnaire must be received by the Commission by August 14, 2015
See last page for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade Commission in
connection with its countervailing duty and antidumping investigations concerning Korea and Turkey (Inv. Nos. 701‐TA‐
524‐525 and 731‐TA‐1260‐1261 (Final)). The information requested in the questionnaire is requested under the
authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a
subpoena or other order to compel the submission of records or information in your firm’s possession (19 U.S.C. §
1333(a)).
Name of firm
Address
City
State
Zip Code
Website
Has your firm produced certain welded line pipe (as defined on next page) at any time since January 1, 2012?
NO
(Sign the certification below and promptly return only this page of the questionnaire to the Commission)
YES
(Complete all parts of the questionnaire, and return the entire questionnaire to the Commission)
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking on the
following link: https://dropbox.usitc.gov/oinv/. (PIN: LINE15)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my
knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission.
By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import‐injury proceedings conducted by
the Commission on the same or similar merchandise.
I acknowledge that information submitted in this questionnaire response and throughout this proceeding may be used by the
Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or
maintaining the records of this proceeding or related proceedings for which this information is submitted, or in internal audits and
proceedings relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all
contract personnel will sign non‐disclosure agreements.
Name of Authorized Official Title of Authorized Official
Date
Phone:
Signature
Fax:
Email address
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 2
PART I.—GENERAL INFORMATION
Background.‐‐This proceeding was instituted in response to a petition filed on October 16, 2014, by
American Cast Iron Pipe Company, Birmingham, AL; Energex, a division of JMC Steel Group, Chicago, IL;
Maverick Tube Corporation, Houston, TX; Northwest Pipe Company, Vancouver, WA; Stupp Corporation,
Baton Rouge, LA; Tex‐Tube Company, Houston, TX; TMK IPSCO, Houston, TX; and Welspun Tubular LLC
USA, Little Rock, AR. Countervailing and antidumping duties may be assessed on the subject imports as a
result of these proceedings if the Commission makes an affirmative determination of injury, threat, or
material retardation, and if the U.S. Department of Commerce makes an affirmative determination of
subsidization/dumping. Questionnaires and other information pertinent to this proceeding are available
at:
http://wwwadmin.usitc.gov/investigations/title_7/2015/certain_welded_line_pipe_korea_and_turkey/f
inal.htm
Certain Welded Line Pipe.‐‐Certain welded line pipe is circular welded carbon and alloy steel (other than
stainless steel) pipe of a kind used for oil or gas pipelines, not more than 609.6 mm (24 inches) in
nominal diameter, regardless of wall thickness, length, surface finish, end finish, or stenciling. Such pipe
is normally produced to the American Petroleum Institute (“API”) specification 5L, but can be produced
to comparable foreign specifications, to proprietary grades, or can be non‐graded material. All pipe
meeting the physical description set forth above, including all multiple‐stenciled pipe with an API line
pipe stencil, is covered by the scope of these investigations.
The welded line pipe that is subject to these investigations is currently classifiable in the Harmonized
Tariff Schedule of the United States (HTSUS) under statistical reporting numbers 7305.11.1030,
7305.11.5000, 7305.12.1030, 7305.12.5000, 7305.19.1030, 7305.19.5000, 7306.19.1010, 7306.19.1050,
7306.19.5110, and 7306.19.5150. While the HTSUS subheadings are provided for convenience and
customs purposes, the written description of the scope of these investigations is dispositive.
Reporting of information.‐‐ If information is not readily available from your records, provide carefully
prepared estimates. If your firm is completing more than one questionnaire (i.e., a producer, importer,
and/or purchaser questionnaire), you need not respond to duplicated questions.
Confidentiality.‐‐The commercial and financial data furnished in response to this questionnaire that
reveal the individual operations of your firm will be treated as confidential by the Commission to the
extent that such data are not otherwise available to the public and will not be disclosed except as may
be required by law (see 19 U.S.C. § 1677f). Such confidential information will not be published in a
manner that will reveal the individual operations of your firm; however, general characterizations of
numerical business proprietary information (such as discussion of trends) will be treated as confidential
business information only at the request of the submitter for good cause shown.
Verification.‐‐The information submitted in this questionnaire is subject to audit and verification by the
Commission. To facilitate possible verification of data, please keep all files, worksheets, and supporting
documents used in the preparation of the questionnaire response. Please also retain a copy of the final
document that you submit.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 3
Release of information.‐‐The information provided by your firm in response to this questionnaire, as
well as any other business proprietary information submitted by your firm to the Commission in
connection with this proceeding, may become subject to, and released under, the administrative
protective order provisions of the Tariff Act of 1930 (19 U.S.C. § 1677f) and section 207.7 of the
Commission’s Rules of Practice and Procedure (19 CFR § 207.7). This means that certain lawyers and
other authorized individuals may temporarily be given access to the information for use in connection
with this proceeding or other import‐injury proceedings conducted by the Commission on the same or
similar merchandise; those individuals would be subject to severe penalties if the information were
divulged to unauthorized individuals.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
I‐1a.
Page 4
OMB statistics.‐‐Please report below the actual number of hours required and the cost to your
firm of completing this questionnaire.
Hours
Dollars
The questions in this questionnaire have been reviewed with market participants to ensure that
issues of concern are adequately addressed and that data requests are sufficient, meaningful,
and as limited as possible. Public reporting burden for this questionnaire is estimated to average
50 hours per response, including the time for reviewing instructions, gathering data, and
completing and reviewing the questionnaire.
We welcome comments regarding the accuracy of this burden estimate, suggestions for
reducing the burden, and any suggestions for improving this questionnaire. Please attach such
comments to your response or send to the Office of Investigations, USITC, 500 E St. SW,
Washington, DC 20436.
I‐1b. TAA information release.‐‐In the event that the U.S. International Trade Commission (USITC)
makes an affirmative final determination in this proceeding, do you consent to the USITC's
release of your contact information (company name, address, contact person, telephone
number, email address) appearing on the front page of this questionnaire to the Departments of
Commerce, Labor, and Agriculture, as applicable, so that your firm and its workers can be made
eligible for benefits under the Trade Adjustment Assistance program?
No
Yes
I‐2.
Establishments covered.‐‐Provide the city, state, zip code, and brief description of each
establishment covered by this questionnaire. If your firm is publicly traded, please specify the
stock exchange and trading symbol in the footnote to the table. Firms operating more than one
establishment should combine the data for all establishments into a single report.
“Establishment”‐‐Each facility of a firm involved in the production of certain welded line pipe,
including auxiliary facilities operated in conjunction with (whether or not physically separate
from) such facilities.
Establishments
City, State
Zip (5 digit)
Description
covered1
1
1
2
3
4
5
6
Additional discussion on establishments consolidated in this questionnaire: .
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
I‐3.
Petition support.‐‐Does your firm support or oppose the petition?
Country
I‐4.
I‐5.
Page 5
Support
Oppose
Take no position
Korea (countervailing duty)
Korea (antidumping duty)
Turkey (countervailing duty)
Turkey (antidumping duty)
Ownership.‐‐Is your firm owned, in whole or in part, by any other firm?
No
Yes‐‐List the following information.
Firm name
Address
Extent of
ownership
(percent)
Related importers/exporters.‐‐Does your firm have any related firms, either domestic or
foreign, that are engaged in importing certain welded line pipe from Korea or Turkey into the
United States or that are engaged in exporting certain welded line pipe from Korea or Turkey to
the United States?
No
Yes‐‐List the following information.
Firm name
Address
Affiliation
I‐6.
Related producers.‐‐Does your firm have any related firms, either domestic or foreign, that are
engaged in the production of certain welded line pipe?
No
Yes‐‐List the following information.
Firm name
Address
Affiliation
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 6
PART II.‐‐TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Angela Newell (202‐708‐
5409, angela.newell@usitc.gov). Supply all data requested on a calendar‐year basis.
II‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part II.
Name
Title
Email
Telephone
Fax
II‐2. Changes in operations.‐‐Please indicate whether your firm has experienced any of the following
changes in relation to the production of certain welded line pipe since January 1, 2012.
(check as many as appropriate)
(please describe)
plant openings
plant closings
relocations
expansions
acquisitions
consolidations
prolonged shutdowns or
production curtailments
revised labor agreements
other (e.g., technology)
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 7
II‐3a. Production using same machinery.‐‐ Please report your firm’s production of products made on
the same equipment and machinery used to produce certain welded line pipe, and the
combined production capacity on this shared equipment and machinery in the periods
indicated.
“Overall production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
Submerged Arc Welded Line Pipe (“SAW”)‐‐SAW pipe is formed from hot‐rolled coils or
cut‐to‐length plate through the use of filler metal and without the application of pressure and
consists of longitudinal SAW pipe (including double seam SAW pipe) and spiral weld (helical)
SAW pipe.
Helical Welded Line Pipe (“HSAW”)–Spiral pipe is formed by coiling hot‐rolled coils or cut‐
to‐length plate into a helix and riveting the overlapping edges together. Spiral pipe made
by the electric‐fusion‐welded process may have a butt joint, a lap joint, or a lock‐seam
joint.
Longitudinal SAW Pipe (“LSAW”)–Pipe that has one or more longitudinal seams
produced from cut‐to‐length plate by the automatic SAW process. At least one
pass shall be on the inside and at least one pass shall be on the outside.
Electric Resistance Welded Line Pipe (“ERW”)‐‐ERW pipe is formed from hot‐rolled coils
through the application of pressure and without the use of filler metal.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 8
(Quantity in short tons)
Calendar years
Item
2012
2013
January‐June
2014
2014
2015
HSAW mills
Overall production capacity (A)
Production of:
HSAW line pipe less than or equal
to 24” O.D. (B)
HSAW line pipe greater than 24”
O.D. (C)
1
Other HSAW products (D)
4
Total HSAW production (E)
0
0
0
0
0
LSAW mills
Overall production capacity (F)
Production of:
LSAW line pipe less than or equal to
24” O.D. (G)
LSAW line pipe greater than 24”
O.D. (H)
2
Other LSAW products (I)
4
0
0
0
0
0
ERW mills
Overall production capacity (K)
Production of:
ERW line pipe less than or equal to
24” O.D. (L)
0
0
Total LSAW production (J)
ERW line pipe greater than 24”
O.D. (M)
Oil country tubular goods (N)
3
Other ERW products (O)
4
Total ERW production (P)
1
0
0
0
Please identify these other HSAW products:
Please identify these other LSAW products:
3
Please identify these other ERW products:
4
Generally, total production lines will not exceed capacity for a given mill type (e.g., line E should not
exceed line A, line J should not exceed line F, and line P should not exceed line K) in any given time period.
If it does, either revise the data or please explain why production exceeded the reported capacity here.
2
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 9
RECONCILATION TO MAIN TRADE GRID.‐‐Please ensure that the quantities reported for line pipe less than
or equal to 24" OD on the three mill types (lines B, G, and L) sum to the total production reported in
question II‐7 (line C). If there is a legitimate reason for these numbers not to reconcile please contact
Angela Newell (202‐708‐5409) prior to submitting this questionnaire; otherwise please ensure that the
reconciliation formula below is returning zeroes ("0"s) in each period.
Calendar years
January‐June
Reconciliation item
2012
2013
2014
2014
2015
Subject line pipe reconciliation
between question II‐3a (lines B, G,
and L) and II‐7 (line C), revise if not
zero ("0")
0
0
0
0
0
II‐3b. Operating parameters.‐‐The production capacity reported in II‐3a is based on operating hours
per week, weeks per year.
II‐3c. Capacity calculation.‐‐Please describe the methodology used to calculate overall production
capacity reported in II‐3a, and explain any changes in reported capacity.
II‐3d. Production constraints.‐‐Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.
II‐3e. Product shifting.—
(e)
Is your firm able to switch production (capacity) between certain welded line pipe and other
products using the same equipment and/or labor?
No
Yes‐‐ (i.e., have produced other products or are able to produce other
products). Please identify other actual or potential products: .
(f)
Please describe the factors that affect your firm’s ability to shift production capacity
between products (e.g., time, cost, relative price change, etc.), and the degree to which
these factors enhance or constrain such shifts.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
II‐4.
Page 10
Tolling.‐‐Since January 1, 2012, has your firm been involved in a toll agreement regarding the
production of certain welded line pipe?
“Toll agreement”‐‐Agreement between two firms whereby the first firm furnishes the raw
materials and the second firm uses the raw materials to produce a product that it then returns
to the first firm with a charge for processing costs, overhead, etc.
No
Yes‐‐Please describe the toll arrangement(s) and name the firm(s) involved
II‐5.
Foreign trade zones.‐‐
(a)
Firm's FTZ operations.‐‐Does your firm produce certain welded line pipe in and/or admit
certain welded line pipe into a foreign trade zone (FTZ)?
“Foreign trade zone” is a designated location in the United States where firms utilize
special procedures that allow delayed or reduced customs duty payments on foreign
merchandise. A foreign trade zone must be designed as such pursuant to the rules and
procedures set forth in the Foreign‐Trade Zones Act.
No
Yes‐‐Describe the nature of your firms operations in FTZs and
identify the specific FTZ site(s).
(b)
Other firms' FTZ operations.‐‐To your knowledge, do any firms in the United States
import certain welded line pipe into a foreign trade zone (FTZ) for use in distribution of
certain welded line pipe and/or the production of downstream articles?
No/Don’t know
Yes‐‐Identify the firms and the FTZs.
II‐6.
Importer.‐‐Since January 1, 2012, has your firm imported certain welded line pipe?
“Importer” – The person or firm primarily liable for the payment of any duties on the
merchandise, or an authorized agent acting on his behalf. The importer may be the consignee,
or the importer of record.
No
Yes‐‐COMPLETE AND RETURN A U.S. IMPORTERS’ QUESTIONNAIRE
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
II‐7.
Page 11
Production, shipment and inventory data.‐‐Report your firm’s production capacity, production,
shipments, and inventories related to the production of certain welded line pipe in its U.S.
establishment(s) during the specified periods.
“Average production capacity” or “capacity” – The level of production that your
establishment(s) could reasonably have expected to attain during the specified periods. Assume
normal operating conditions (i.e., using equipment and machinery in place and ready to
operate; normal operating levels (hours per week/weeks per year) and time for downtime,
maintenance, repair, and cleanup; and a typical or representative product mix).
“Production” – All production in your U.S. establishment(s), including production consumed
internally within your firm and production for another firm under a toll agreement.
“U.S. commercial shipments” –Shipments made within the United States as a result of an arm’s
length commercial transaction in the ordinary course of business. Report net values (i.e., gross
sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods) in U.S. dollars, f.o.b. your point of shipment.
“Internal consumption” – Product consumed internally by your firm.
“Transfers to related firms” –Shipments made to related domestic firms. Such transactions are
valued at fair market value.
“Related firm” –A firm that your firm solely or jointly owns, manages, or otherwise controls.
Such transactions are valued at fair market value.
“Export shipments” –Shipments to destinations outside the United States, including shipments
to related firms.
“Inventories”— Finished goods inventory, not raw materials or work‐in‐progress.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the trade data, as Commission staff may contact your firm regarding
questions on the trade data. The Commission may also request that your company submit copies
of the supporting documents/records (such as production and sales schedules, inventory records,
etc.) used to compile these data.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
II‐7.
Page 12
Production, shipment and inventory data.—
Quantity (in short tons) and value (in $1,000)
Calendar years
Item
2012
2013
January‐June
2014
1
Average production capacity (quantity) (A)
2014
Beginning‐of‐period inventories (quantity)
(B)
Production (quantity) (C)
U.S. shipments:
Commercial shipments:
Quantity (D)
Value (E)
Internal consumption:
Quantity (F)
2
Value (G)
Transfers to related firms:
Quantity (H)
2
Value (I)
2015
3
Export shipments:
Quantity (J)
Value (K)
4
End‐of‐period inventories (quantity) (L)
1
The production capacity reported is based on operating
hours per week,
weeks per year. Please describe the
methodology used to calculate production capacity, and explain any changes in reported capacity. .
2
Internal consumption and transfers to related firms must be valued at fair market value. In the event that your firm
uses a different basis for valuing these transactions, please specify that basis (e.g., cost, cost plus, etc.) and provide value
data using that basis for each of the periods noted above: .
3
Identify your firm’s principal export markets: .
RECONCILIATION OF SHIPMENTS, PRODUCTION, AND INVENTORY.‐‐Generally, the data reported for the end‐of‐
period inventories (i.e., line L) should be equal to the beginning‐of‐period inventories (i.e., line B), plus
production (i.e., line C), less total shipments (i.e., lines D, F, H, and J). Please ensure that any differences are not
due to data entry errors in completing this form, but rather actually reflect your firm’s records; and also provide
any likely explanations for any differences (e.g., theft, loss, damage, record systems issues, etc.) if they exist.
Calendar years
Reconciliation
B + C – D – F – H – J – L = should equal
zero ("0") or provide an explanation.1
1
2012
2013
0
January‐June
2014
0
2014
0
2015
0
Explanation if the calculated fields above are returning values other than zero (i.e., “0”) but are nonetheless accurate: .
0
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
II‐8.
Page 13
Channels of distribution.‐‐ Report your firm’s commercial U.S. shipments by channel of
distribution.
Quantity (in short tons)
Calendar years
Item
2012
2013
January‐June
2014
2014
2015
Channels of distribution:
Commercial U.S. shipments:
Line pipe less than or equal to
16” in O.D. to distributors
(quantity) (M)
Line pipe less than or equal to
16” in O.D. to end users
(quantity) (N)
Line pipe greater than 16” but
less than or equal to 24” in
O.D. to distributors (quantity)
(O)
Line pipe greater than 16” but
less than or equal to 24” in
O.D. to end users (quantity)
(P)
Calendar years
Reconciliation
(M + N + O + P) – D = zero ("0"), if not
revise.
2012
2013
0
January‐June
2014
0
2014
0
0
2015
0
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
II‐9.
Page 14
Employment data.‐‐Report your firm’s employment‐related data related to the production of
certain welded line pipe and provide any explanation for any trends in these data.
“Production Related Workers” (PRWs) includes working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production
for plant’s own use (e.g., power plant), recordkeeping, and other services closely associated with
the above production operations.
Average number employed may be computed by adding the number of employees, both full
time and part time, for the 12 pay periods ending closest to the 15th of the month and divide
that total by 12. For the January to June periods, calculate similarly and divide by 6.
“Hours worked” includes time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight time hours.
“Wages paid” –Total wages paid before deductions of any kind (e.g., withholding taxes, old‐age
and unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid
directly by your firm for overtime, holidays, vacations, and sick leave.
Calendar years
Item
2012
2013
January‐June
2014
2014
2015
Average number of PRWs
(number)
Hours worked by PRWs
(1,000 hours)
Wages paid to PRWs ($1,000)
Explanation of trends:
II‐10. Related firms.‐‐If your firm reported transfers to related firms in question II‐8, please indicate
the nature of the relationship between your firm and the related firms (e.g., joint venture,
wholly owned subsidiary), whether the transfers were priced at market value or by a non‐
market formula, whether your firm retained marketing rights to all transfers, and whether the
related firms also processed inputs from sources other than your firm.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 15
II‐11. Purchases.‐‐Other than direct imports, has your firm otherwise purchased certain welded line
pipe since January 1, 2012?
“Purchase” – A transaction to buy product from a U.S. corporate entity such as another U.S.
producer, a U.S. distributor, or a U.S. firm that has directly imported the product.
“Direct import” –A transaction to buy from a foreign producer where your firm is the importer
of record or consignee.
No
Yes‐‐Report such purchases below and explain the reasons for your firms'
purchases:
(Quantity in short tons)
Calendar years
Item
Purchases from U.S.
importers1 of certain welded
line pipe from—
Korea
2012
2013
January‐June
2014
2014
2015
Turkey
All other sources
Purchases from domestic
producers2
Purchases from other
sources2
1
Please list the name of the importer(s) from which your firm purchased this product. If your firm’s import
suppliers differ by source, please identify the source for each listed supplier: .
2
Please list the name of the producer(s) or U.S. distributor(s) from which your firm purchased this product:
.
II‐12. Other explanations:‐‐If your firm would like to further explain a response to a question in Part II
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 16
PART III.‐‐FINANCIAL INFORMATION
Address questions on this part of the questionnaire to Mary Klir (202‐205‐3247, mary.klir@usitc.gov).
III‐1. Contact information.‐‐ Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted
in part III.
Name
Title
Email
Telephone
Fax
III‐2. Accounting system.‐‐Briefly describe your firm’s financial accounting system.
A.
When does your firm’s fiscal year end (month and day)?
If your firm’s fiscal year changed during the data‐collection period, explain
below:
B.1. Describe the lowest level of operations (e.g., plant, division, company‐wide) for
which financial statements are prepared that include certain welded line pipe:
2. Does your firm prepare profit/loss statements for certain welded line pipe:
Yes
No
3. How often did your firm (or parent company) prepare financial statements
(including annual reports, 10Ks)? Please check relevant items below.
Audited unaudited annual reports 10Ks
Monthly quarterly semi‐annually annually
4. Accounting basis: GAAP cash tax other comprehensive
basis of accounting (specify)
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the financial data, as Commission staff may contact your firm
regarding questions on the financial data. The Commission may also request that your company
submit copies of the supporting documents/records (financial statements, including internal
profit‐and‐loss statements for the division or product group that includes certain welded line pipe,
as well as specific statements and worksheets) used to compile these data.
III‐3.
Cost accounting system.‐‐Briefly describe your firm’s cost accounting system (e.g., standard
cost, job order cost, etc.).
III‐4.
Allocation basis.‐‐Briefly describe your firm’s allocation basis, if any, for COGS, SG&A, and
interest expense and other income and expenses.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
III‐5.
Other products.‐‐Please list the products your firm produced in the facilities in which your firm
produced certain welded line pipe, and provide the share of net sales accounted for by these
other products in your firm’s most recent fiscal year.
Products
III‐6.
Page 17
Share of sales
Certain welded line pipe
%
%
%
%
%
Does your firm purchase inputs (raw materials, labor, energy, or any services) used in the
production of certain welded line pipe from any related suppliers (e.g., inclusive of transactions
between related firms, divisions and/or other components within the same company)?
Yes‐‐Continue to question III‐7.
III‐7.
No‐‐Continue to question III‐9a.
Inputs from related suppliers.‐‐Please identify the inputs used in the production of certain
welded line pipe that your firm purchases from related suppliers and that are reflected in table
III‐9a. For “Share of total COGS” please report this information by relevant input on the basis of
your most recently completed fiscal year. For “Input valuation” please describe the basis, as
recorded in your company’s own accounting system, of the purchase cost from the related
supplier; e.g., the related supplier’s actual cost, cost plus, negotiated transfer price to
approximate fair market value.
Input
Related supplier
Share of total COGS
Input valuation as recorded in the firm’s accounting books and records
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
III‐8.
Page 18
Inputs purchased from related suppliers.‐‐Please confirm that the inputs purchased from
related suppliers, as identified in III‐7, were reported in III‐9a (financial results on certain welded
line pipe) in a manner consistent with your firm’s accounting books and records.
Yes
No‐‐In the space below, please report the valuation basis of inputs purchased from related
suppliers as reported in table III‐9a.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 19
III‐9a. Operations on certain welded line pipe.‐‐Report the revenue and related cost information
requested below on the certain welded line pipe operations of your firm’s U.S.
establishment(s).1 Do not report resales of products. Note that internal consumption and
transfers to related firms must be valued at fair market value. Input purchases from related
suppliers should be consistent with and based on information in your firm’s accounting books
and records. Provide data for your firm’s three most recently completed fiscal years, and for
the specified interim periods.
Quantity (in short tons) and value (in $1,000)
Fiscal years ended‐‐
Item
2012
2013
January‐June
2014
2014
2015
2
Net sales quantities:
Commercial sales (“CS”)
Internal consumption (“IC”)
Transfers to related firms (“Transfers”)
0
0
0
0
0
Total net sales quantities
2
Net sales values:
Commercial sales
Internal consumption
Transfers to related firms
0
0
0
0
0
Total net sales values
3
Cost of goods sold (COGS):
Raw material costs – hot‐rolled steel
0
0
0
0
0
Direct labor
Other factory costs
Raw material costs – other
Total Raw materials
4
Less: Byproduct/scrap revenue, if applicable
Total COGS
0
0
0
0
0
Gross profit or (loss)
0
0
0
0
0
Selling, general, and administrative (SG&A)
expenses:
Selling expenses
General and administrative expenses
0
0
0
0
0
0
0
0
0
0
All other expense items
All other income items
0
0
0
0
0
Total SG&A expenses
Operating income (loss)
Other expenses and income:
Interest expense
Net income or (loss) before income taxes
Depreciation/amortization included above
1 Include only sales (whether domestic or export) and costs related to your U.S. manufacturing operations.
2
Less discounts, returns, allowances, and prepaid freight. The quantities and values should approximate the corresponding
shipment quantities and values reported in Part II of this questionnaire.
3 COGS (whether for domestic or export sales) should include costs associated with CS, IC, and Transfers.
4
Byproduct revenue should be reported here as a positive number for the calculated fields to function as intended.
Note ‐‐ The table above contains calculations that will appear when you have entered data in the MS
Word form fields.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 20
III‐9b. Financial data reconciliation.‐‐The calculable line items from question III‐9a (i.e., total net sales
quantities and values, total COGS, gross profit (or loss), total SG&A, and net income (or loss))
have been calculated from the data submitted in the other line items. Do the calculated fields
return the correct data according to your firm's financial records ignoring non‐material
differences that may arise due to rounding?
Yes No‐‐If the calculated fields do not show the correct data, please double check the
feeder data for data entry errors and revise.
Also, check signs accorded to the post operating income line items; the two
expense line items should report positive numbers (i.e., expenses are
positive and incomes or reversals are negative‐‐instances of the latter
should be rare in those lines) while the income line item also in most
instances should have its value be a positive number (i.e., income is positive,
expenses or reversals are negative).
If after reviewing and potentially revising the feeder data your firm has
provided, the differences between your records and the calculated fields
persist please identify and discuss the differences in the space below.
III‐10. Raw material costs.—Please describe the key factors that affect reported raw material costs for
hot‐rolled steel, particularly if analyzed on a per short ton basis and compared to published
price data for hot‐rolled steel; e.g., the quality or type of hot‐rolled steel required to produce
certain welded line pipe, freight costs, additional processing costs (specify), inventory valuation,
adjustments taken in the normal course of business (specify), yield loss.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 21
III‐11a. Nonrecurring items (charges and gains) included in the subject product financial results.‐‐For
each annual and interim period for which financial results are reported in question III‐9a, please
specify all material (significant) nonrecurring items (charges and gains) in the schedule below,
the specific table III‐9a line item where the nonrecurring items are included, a brief description
of the relevant nonrecurring items, and the associated values (in $1,000), as reflected in table
III‐9a; i.e., if an aggregate nonrecurring item has been allocated to table III‐9a, only the allocated
value amount included in table III‐9a should be reported in the schedule below. Note: The
Commission’s objective here is to gather information only on material (significant) nonrecurring
items which impacted the reported financial results of the subject product in table III‐9a.
Fiscal years ended‐‐
2012
2013
January‐June
2014
2014
2015
Nonrecurring item: In this column please provide a brief
Nonrecurring item: In these columns please report the amount of the relevant
description of each nonrecurring item and indicate the
nonrecurring item reported in table III‐9a.
specific line item in table III‐9a where the nonrecurring item is
classified.
Value ($1,000)
1. , classified as
2. , classified as
3. , classified as
4. , classified as
5. , classified as
6. , classified as
7. , classified as
III‐11b. Classification of identified nonrecurring items (charges and gains) in the accounting books and
records of the company.‐‐If non‐recurring items were reported in table III‐10 above, please
identify where your company recorded these items in your accounting books and records in the
normal course of business; i.e., III‐10 information designates where these items are reported in
table III‐9a.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 22
III‐12. Asset values.‐‐Report the total assets (i.e., both current and long‐term assets) associated with
the production, warehousing, and sale of certain welded line pipe. If your firm does not
maintain some or all of the specific asset information necessary to calculate total assets for
certain welded line pipe in the normal course of business, please estimate this information
based upon a method (such as production, sales, or costs) that is consistent with your firm’s cost
allocations in the previous question. Provide data as of the end of your firm’s three most
recently completed fiscal years.
Note: Total assets should reflect net assets after any accumulated depreciation and allowances
deducted.
Total assets should be allocated to the subject products if these assets are also related to other
products. Please provide a brief explanation if there are any substantial changes in total asset
value during the period; e.g., due to asset write‐offs, revaluation, and major purchases.
Value (in $1,000)
Fiscal years ended‐‐
Item
1
Total assets (net)
1
2012
2013
2014
Describe
III‐13a. Capital expenditures and research and development expenses.‐‐Report your firm’s capital
expenditures and research and development expenses on certain welded line pipe. Provide
data for your firm’s three most recently completed fiscal years, and for the specified interim
periods.
Value (in $1,000)
Fiscal years ended‐‐
Item
2012
2013
January‐June
2014
2014
Capital expenditures
Research and development expenses
III‐13b. Capital expenditures.‐‐Please indicate the nature, focus, and significance of your firm’s capital
expenditures on the subject product.
2015
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 23
III‐14. Data consistency and reconciliation.‐‐Please indicate whether your firm’s financial data for
questions III‐9a, 12, and 13a are based on a calendar year or on your firm’s fiscal year:
Calendar year
Fiscal year Specify fiscal year
Please note the quantities and values reported in question III‐9a should reconcile with the data
reported in question II‐7 (including export shipments) as long as they are reported on the same
calendar year basis.
Do these data in question III‐9a reconcile with data in question II‐7?
Yes
No
If no, please explain.
III‐15a. Effects of imports.‐‐Since January 1, 2012, has your firm experienced any actual negative effects
on its return on investment or its growth, investment, ability to raise capital, existing
development and production efforts (including efforts to develop a derivative or more advanced
version of the product), or the scale of capital investments as a result of imports of certain
welded line pipe from Korea or Turkey?
No
Yes‐‐My firm has experienced actual negative effects as follows:
Cancellation, postponement, or rejection of expansion projects
Denial or rejection of investment proposal
Reduction in the size of capital investments
Rejection of bank loans
Lowering of credit rating
Problem related to the issue of stocks or bonds
Other (specify):
III‐15b. Does your firm’s response differ by country?
No
Yes
If yes, indicate which country and why:
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 24
III‐16a. Anticipated effects of imports.‐‐Does your firm anticipate any negative effects due to imports of
certain welded line pipe from Korea or Turkey?
No
Yes
If yes, my firm anticipates negative effects as follows:
III‐16b. Does your firm’s response differ by country?
No
Yes
If yes, indicate which country and why:
III‐17. Other explanations:‐‐If your firm would like to further explain a response to a question in Part III
that did not provide a narrative box, please note the question number and the explanation in
the space provided below. Please also use this space to highlight any issues your firm had in
providing the data in this section, including but not limited to technical issues with the MS Word
questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 25
PART IV.‐‐ PRICING AND MARKET FACTORS
Further information on this part of the questionnaire can be obtained from Cindy Cohen (202‐205‐3230,
cindy.cohen@usitc.gov).
IV‐1. Contact information.‐‐Please identify the individual that Commission staff may contact
regarding the confidential information submitted in part IV.
Name
Title
Email
Telephone
Fax
PRICE DATA
IV‐2. This question requests quarterly quantity and value data for your firm’s commercial shipments
to unrelated U.S. customers since January 1, 2012 of the following products produced by your
firm.
Product 1.‐‐ API 5L Grade B/X42 welded pipe, 6‐inch nominal size (6.625 inch O.D.), plain end,
with a wall thickness of 0.280 inch.
Product 2.‐‐ API 5L Grade B/X42 welded pipe, 8‐inch nominal size (8.625 inch O.D.), plain end,
with wall thickness of 0.322 inch.
Product 3.‐‐ API 5L Grade B/X42 welded pipe, 12‐inch nominal size (12.75 inch O.D.), plain
end, with a wall thickness of 0.375 inch.
Product 4.‐‐ API 5L Grade B/X60 welded pipe or API 5L Grade X60, 24‐inch nominal size (24
inch O.D.), plain end, with a wall thickness of 0.375 inch.
Please note that values should be f.o.b., U.S. point of shipment and should not include U.S.‐inland
transportation costs. Values should reflect the final net amount paid to your firm (i.e., should be net
of all deductions for discounts or rebates).
During January 2012‐June 2015, did your firm produce and sell to unrelated U.S. customers any
of the above listed products (or any products that were competitive with these products)?
Yes.‐‐Please complete the following pricing data table as appropriate.
No.‐‐Skip to question IV‐3.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
IV‐2.
Page 26
Price data.‐‐Report below the quarterly price data1 for pricing products2 produced and sold by
your firm.
Report data in actual short tons and actual dollars (not 1,000s).
(Quantity in short tons, value in dollars)
Product 1
Product 2
Product 3
Quantity
Value
Quantity
Value Quantity
Value
Product 4
Period of shipment
Quantity
Value
2012:
January‐March
April‐June
July‐September
October‐December
2013:
January‐March
April‐June
July‐September
October‐December
2014:
January‐March
April‐June
July‐September
October‐December
2015:
January‐March
April‐June
1
Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned
goods), f.o.b. your firm’s U.S. point of shipment.
2
Pricing product definitions are provided on the first page of Part IV.
Note.‐‐If your firm’s product does not exactly meet the product specifications but is competitive with the specified product,
provide a description of your firm’s product. Also, please explain any anomalies in your firm’s reported pricing data.
Product 1:
Product 2:
Product 3:
Product 4:
Pricing data methodology.—Please describe the method and the kinds of documents/records
that were used to compile your price data.
Note: As requested in Part I of this questionnaire, please keep all supporting documents/records
used in the preparation of the price data, as Commission staff may contact your firm regarding
questions on the price data. The Commission may also request that your company submit copies
of the supporting documents/records (such as sales journal, invoices, etc.) used to compile these
data.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
IV‐3.
Page 27
Price setting.‐‐ How does your firm determine the prices that it charges for sales of certain
welded line pipe (check all that apply)? If your firm issues price lists, please submit sample
pages of a recent list.
Transaction
by
transaction
Contracts
IV‐4.
Set
price
lists
Other
If other, describe
Discount policy.‐‐ Please indicate and describe your firm’s discount policies (check all that
apply).
Quantity
discounts
Annual
total
volume
discounts
IV‐5.
No
discount
policy
(a)
What are your firm’s typical sales terms for its U.S.‐produced certain welded line pipe?
Net 60
days
(b)
2/10 net
30 days
Other
Other (specify)
On what basis are your firm’s prices of domestic certain welded line pipe usually quoted
(check one)?
IV‐6.
Describe
Pricing terms.‐‐
Net 30
days
Other
Delivered
F.o.b.
If f.o.b., specify point
Contract versus spot.‐‐Approximately what share of your firm’s sales of its U.S.‐produced
certain welded line pipe in 2014 was on a (1) long‐term contract basis, (2) annual contract basis,
(3) short‐term contract basis, and (4) spot sales basis?
Long‐term
contracts
(multiple
deliveries for
more than 12
months)
Share of 2014
sales
%
Type of sale
Short‐term
Annual
contracts
contracts
(multiple
(multiple
deliveries for
deliveries for 12
less than 12
months)
months)
%
%
Spot sales
(for a single
delivery)
%
Total
(should
sum to
100.0%)
0.0
%
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
IV‐7.
Page 28
Contract provisions.‐‐Please fill out the table regarding your firm’s typical sales contracts for
U.S.‐produced certain welded line pipe (or check “not applicable” if your firm does not sell on a
long‐term, short‐term and/or annual contract basis).
Typical sales
contract provisions
Average contract
duration
Item
Short‐term contracts
(multiple deliveries
for less than 12
months)
Annual contracts
(multiple
deliveries for 12
months)
Long‐term contracts
(multiple deliveries for
more than 12 months)
# of days
365
Price renegotiation
(during contract
period)
Yes
No
Quantity
Price
Both
Yes
No
Fixed quantity
and/or price
Meet or release
provision
Not applicable
IV‐8.
Lead times.‐‐What is your firm’s share of sales from inventory and produced to order and what
is the typical lead time between a customer’s order and the date of delivery for your firm’s sales
of its U.S.‐produced certain welded line pipe?
Share of 2014
Source
sales
Lead time (days)
From inventory
%
Produced to order
%
Total (should sum to 100.0%)
0.0 %
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
IV‐9.
Page 29
Shipping information.‐‐
(a)
(b)
(c)
What is the approximate percentage of the total delivered cost of U.S.‐produced certain
welded line pipe that is accounted for by U.S. inland transportation costs?
percent
Who generally arranges the transportation to your firm’s customers’ locations?
Your firm Purchaser (check one)
Indicate the approximate percentage of your firm’s sales of certain welded line pipe that
are delivered the following distances from its production facility.
Distance from production facility
Share
Within 100 miles
%
101 to 1,000 miles
%
Over 1,000 miles
%
Total (should sum to 100.0%)
0.0 %
IV‐10. Geographical shipments.‐‐ In which U.S. geographic market area(s) has your firm sold its U.S.‐
produced certain welded line pipe since January 1, 2012 (check all that apply)?
Geographic area
√ if applicable
Northeast.–CT, ME, MA, NH, NJ, NY, PA, RI, and VT.
Midwest.–IL, IN, IA, KS, MI, MN, MO, NE, ND, OH, SD, and WI.
Southeast.–AL, DE, DC, FL, GA, KY, MD, MS, NC, SC, TN, VA, and WV.
Central Southwest.–AR, LA, OK, and TX.
Mountains.–AZ, CO, ID, MT, NV, NM, UT, and WY.
Pacific Coast.–CA, OR, and WA.
Other.–All other markets in the United States not previously listed,
including AK, HI, PR, and VI.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 30
IV‐11. End uses.‐‐List the end uses of the certain welded line pipe that your firm manufactures. For
each end‐use product, what percentage of the total cost is accounted for by certain welded line
pipe and other inputs?
Share of total cost of end use product
accounted for by
Total
Certain welded line
(should sum to
pipe
Other inputs
End use product
100.0% across)
%
%
0.0 %
%
%
0.0 %
%
%
0.0 %
IV‐12. Substitutes.‐‐ Can other products be substituted for certain welded line pipe?
No
Yes‐‐Please fill out the table.
End use in which this
substitute is used
Substitute
Have changes in the prices of this substitute
affected the price for certain welded line
pipe?
No Yes
Explanation
1.
2.
3.
IV‐13. Demand trends.‐‐ Indicate how demand within the United States and outside of the United
States (if known) for certain welded line pipe has changed since January 1, 2012. Explain any
trends and describe the principal factors that have affected these changes in demand.
Market
Overall
No
Overall
increase change decrease
Fluctuate
with no
clear trend
Explanation and factors
Within
the United
States
Outside
the United
States
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 31
IV‐14. Product changes.‐‐Have there been any significant changes in the product range, product mix,
or marketing of certain welded line pipe since January 1, 2012?
No
Yes
If yes, please describe and quantify if possible.
IV‐15. Conditions of competition.‐‐
(a) Is the certain welded line pipe market subject to business cycles (other than general
economy‐wide conditions) and/or other conditions of competition distinctive to certain
welded line pipe? If yes, describe.
Check all that apply.
Please describe.
No
Skip to question IV‐16.
Yes‐Business cycles (e.g.
seasonal business)
Yes‐Other distinctive
conditions of competition
(b) If yes, have there been any changes in the business cycles or conditions of competition for
certain welded line pipe since January 1, 2012?
No
Yes
If yes, describe.
IV‐16. Supply constraints.‐‐Has your firm refused, declined, or been unable to supply certain welded
line pipe since January 1, 2012 (examples include placing customers on allocation or “controlled
order entry,” declining to accept new customers or renew existing customers, delivering less
than the quantity promised, been unable to meet timely shipment commitments, etc.)?
No
Yes
If yes, please describe.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 32
IV‐17. Raw materials.‐‐How have certain welded line pipe raw materials prices changed since January
1, 2012?
Explain, noting how raw material price changes
Fluctuate
with no have affected your firm’s selling prices for certain
Overall
No
Overall
welded line pipe.
increase change decrease clear trend
IV‐18. Interchangeability.‐‐Is certain welded line pipe produced in the United States and in other
countries interchangeable (i.e., can they physically be used in the same applications)?
Please indicate A, F, S, N, or 0 in the table below:
A = the products from a specified country‐pair are always interchangeable
F = the products are frequently interchangeable
S = the products are sometimes interchangeable
N = the products are never interchangeable
0 = no familiarity with products from a specified country‐pair
Country‐pair
United
States
Korea
Turkey
Japan
Mexico
Other countries
Korea
Turkey
Japan
Mexico
For any country‐pair producing certain welded line pipe that is sometimes or never
interchangeable, identify the country‐pair and explain the factors that limit or preclude
interchangeable use:
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 33
IV‐19. Factors other than price.‐‐Are differences other than price (e.g., quality, availability,
transportation network, product range, technical support, etc.) between certain welded line
pipe produced in the United States and in other countries a significant factor in your firm’s sales
of the products?
Please indicate A, F, S, N, or 0 in the table below:
A = such differences are always significant
F = such differences are frequently significant
S = such differences are sometimes significant
N = such differences are never significant
0 = no familiarity with products from a specified country‐pair
Country‐pair
Korea
Turkey
Japan
Mexico
Other countries
United States
Korea
Turkey
Japan
Mexico
For any country‐pair for which factors other than price always or frequently are a significant factor in
your firm’s sales of certain welded line pipe , identify the country‐pair and report the advantages or
disadvantages imparted by such factors:
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 34
IV‐20. Customer identification‐‐List the names and contact information for your firm’s 10 largest U.S.
customers for certain welded line pipe since January 1, 2012. Indicate the share of the quantity
of your firm’s total shipments of certain welded line pipe that each of these customers
accounted for in 2014.
Customer’s name
City
State
Share of 2014 sales (%)
1
2
3
4
5
6
7
8
9
10
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 35
IV‐21. Competition from imports
(a)
Lost revenue.‐‐Since January 1, 2012: To avoid losing sales to competitors selling
certain welded line pipe from Korea and/or Turkey, did your firm:
No
Yes
Reduce prices
Roll back announced price increases
(b)
Lost sales.‐‐Since January 1, 2012: Did your firm lose sales of certain welded line pipe to
imports of this product from Korea and/or Turkey?
No
Yes
(c)
The submission of lost sales/lost revenue allegations is to be completed only by NON‐
PETITIONERS. (Note: petitioners may provide allegations involving quotes made
AFTER the filing of the petition.) Please do not resubmit allegations provided
previously.
If your firm indicated “yes” to any of the above, your firm can provide the Commission
with additional information by downloading and completing the lost sales/lost revenues
worksheet at http://usitc.gov/trade_remedy/question.htm. Note that the Commission
may contact the firms named to verify the allegations reported.
Is your firm submitting the lost sales/lost revenues worksheet?
No—Please explain.
Yes—Please complete the worksheet and submit via the Commission dropbox.
https://dropbox.usitc.gov/oinv/. (PIN: LINE15)
IV‐22. Other explanations‐‐If your firm would like to further explain a response to a question in Part IV
that did not provide a narrative response box, please note the question number and the
explanation in the space provided below. Please also use this space to highlight any issues your
firm had in providing the data in this section, including but not limited to technical issues with
the MS Word questionnaire.
Business Proprietary
U.S. Producers’ Questionnaire ‐ Certain Welded Line Pipe
Page 36
HOW TO FILE YOUR QUESTIONNAIRE RESPONSE
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at:
http://wwwadmin.usitc.gov/investigations/title_7/2015/certain_welded_line_pipe_korea_
and_turkey/final.htm
Please do not attempt to modify the format or permissions of the questionnaire
document. Please submit the completed questionnaire using one of the methods noted
below. If your firm is unable to complete the MS Word questionnaire or cannot use one
of the electronic methods of submission, please contact the Commission for further
instructions.
• Upload via Secure Drop Box.—Upload the MS Word questionnaire along with a scanned copy of the
signed certification page (page 1) through the Commission’s secure upload facility:
Web address: https://dropbox.usitc.gov/oinv/
Pin: LINE15
• E‐mail.—E‐mail the MS Word questionnaire to angela.newell@usitc.gov; include a scanned copy of
the signed certification page (page 1). Please note that submitting your questionnaire by e‐mail may
subject your firm’s business proprietary information to transmission over an unsecure environment and
to possible disclosure. If you choose this option, the Commission warns you that any risk involving
possible disclosure of such information is assumed by the submitter and not by the Commission.
If your firm does not produce this product, please fill out page 1, print, sign, and submit a scanned copy
to the Commission.
Parties to this proceeding.—If your firm is a party to this proceeding, it is required to serve a copy of the
completed questionnaire on parties to the proceeding that are subject to administrative protective
order (see 19 CFR § 207.7). A list of such parties may be obtained from the Commission’s Secretary (202‐
205‐1803). A certificate of service must accompany the completed questionnaire you submit (see 19 CFR
§ 207.7). Service of the questionnaire must be made in paper form.
File Type | application/pdf |
File Title | Microsoft Word - US producer questionnaire_CWLP |
Author | angela.newell |
File Modified | 2015-06-29 |
File Created | 2015-06-29 |