In accordance
with 5 CFR 1320, the information collection is approved for three
years.
Inventory as of this Action
Requested
Previously Approved
11/30/2018
36 Months From Approved
11/30/2015
56
0
108
13,038
0
20,537
375,200
0
590,280
This standard applies to owners and
operators of secondary lead smelter industry facilities. The
provisions of this subpart apply to secondary lead smelters that
use blast, reverberatory, rotary, or electric smelting furnaces to
recover lead metal from scrap lead, primarily from used lead-acid
automotive-type batteries. Consistent with the NESHAP General
Provisions (40 CFR Part 63, Subpart A), owners and operators must
comply with recordkeeping, monitoring and reporting requirements
including control device parameter monitoring, conduct performance
tests and submittal of initial and periodic reports such as
semiannual compliance reports and an operation, maintenance and
monitoring plan. The required semiannual reports are used to
determine periods of excess emissions, identify problems at the
facility, verify operation/maintenance procedures, and for
compliance determinations.
In this ICR renewal, we have
made adjustments to reflect current rule requirements and removed
duplicate items contained in previous ICRs. In addition, this ICR
renewal reflects a decrease in the number of respondents from 16 to
14 due to facility closures.
$35,905
No
No
No
No
No
Uncollected
Patrick Yellin 202 564-2970
yellin.patrick@epa.gov
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.