FGIS 923 Moisture Meter Test

Reporting and Recordkeeping Requirements (US Grain Standards Act and Agricultural Marketing Act of 1946)

fgis-923.xls

Reporting and Recordkeeping Requirements - Private Sector

OMB: 0580-0013

Document [xlsx]
Download: xlsx | pdf

Overview

FGIS-923
Instructions


Sheet 1: FGIS-923






. FORM APPROVED


OMB NO. 0580-0013


File Name:




Field Office




Agency



Location



Phone



Fax












PARTS A. AND B. CALIBRATION CONSTANTS & DIAGNOSTIC VALUES VERIFICATION






VERIFIED K1 THRU K9 : Initials














METER S/N
SCD1
SCD2










PART C. WEIGHING ACCURACY TEST








DROP 1 DROP 2 DROP 3 DROP 4 DROP 5
D3 VALUE






D3 / 10 ROUND TO 0.1
0.0 0.0 0.0 0.0 0.0
SCALE WEIGHT (g)






GAC WT - SCALE WEIGHT
0.0 0.0 0.0 0.0 0.0








AVG OF DIFFERENCES
0.0 RANGE OF DIFFERENCES
0.0









PART D. GRAIN MOISTURE SAMPLE TEST






METER CAC
SAMPLE I.D.













DROP 1 DROP 2 DROP 3 DROP 4 DROP 5 DROP 6
DISPLAY MOISTURE






D1






D2






D3






D4






CALC. MOISTURE






AVG MOISTURE #DIV/0!





STD. AVG.MOISTURE






DEVIATION #DIV/0!
OPERATOR (FIELD):
DATE TESTED:

TOLERANCE 0.15
REVIEWER (HQ):
DATE REVIEWED:









RECOMMENDED ACTION: APPROVED RETEST REPAIR
COMMENTS














Form FGIS 923 (7-04) Previous editions may be used.

Expires January 2015





































































































































































































































































































































Sheet 2: Instructions









Instructions for Completing


Form FGIS-923, “Moisture Meter Test”







Fill in any missing or incorrect information in the Identification Block.




Part A.




Verify all official calibration constants. Update all obsolete calibrations. Initial to indicate that all calibrations are correct.




Part B.




Enter meter serial number.

Enter SCD1 and SCD2 values.




Part C.




1 Enter the result of the first drop (the D3 value).

2 Divide the D3 reading by 10. Record the result to 0.1

3 Enter the weight reading from the lab scale.

4 Enter the difference (Item 2 minus Item 3).

5 Repeat Item 1 through Item 4 for a total of five drops.

6 Enter the average difference (average of five differences from Item 4).

7 Enter the range of differences (total spread of the differences).




Part D.




1 Enter the CAC from the meter display (not from records).

2 Enter the grain sample identification.

3 Enter the moisture display for the first drop.

4 Enter the values D1, D2, D3, and D4 for the first drop.


5 Repeat Items 3 and 4 for a total of six drops.

6 Enter the name of the field test meter operator.


7 Enter the date.

8 Check the box whether the meter is approved for use, needs testing again, or repairing.

9 Any additional comments necessary concerning the test or information about the meter.










































File Typeapplication/vnd.ms-excel
File TitleGAC Moisture Meter Test Form
Subjectelectronic forms
Last Modified ByASGreenfield
File Modified2011-03-16
File Created1998-06-30

© 2024 OMB.report | Privacy Policy