FERC requested
to withdraw this collection in order to designate the collection as
an "extension without change of a currently approved collection."
The terms of the previous clearance remain in effect.
Inventory as of this Action
Requested
Previously Approved
06/30/2014
36 Months From Approved
06/30/2014
470
0
470
138,980
0
138,980
55,800
0
55,800
The three FAC Reliability Standards
(FAC-010-1, FAC-001-1, and FAC-014-1) contained in the FERC-725D
information collection require planning authorities and reliability
coordinators to establish methodologies to determine system
operating limits (SOLs) for the bulk-power system in the planning
and operation horizons. The three Reliability Standards do not
require responsible entities to file information with the
Commission. Nor, with the exception of a three year
self-certification of compliance, do the Reliability Standards
require responsible entities to file information with the ERO or
Regional Entities. However, the Reliability Standards do require
responsible entities to develop and maintain certain information
for a specified period of time, subject to inspection by the ERO or
Regional Entities. These three Reliability Standards serve an
important reliability purpose in ensuring that SOLs used in the
reliable planning and operation of the Bulk-Power System are
determined based on an established methodology. Moreover, they
clearly identify the entities to which they apply and contain clear
and enforceable requirements.
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.