Follow-up/Supplemental TSCA Sec. 8(e) Submissions

Section 8(e) Notice User Guide –
Primary Authorized Official
Environmental Protection Agency
Office of Pollution Prevention and Toxics
Manage Toxic Substances

Delivery Order # GS00Q09BGD0022
Task Order # EP-G11H-00154
Project # TDD 9.21
Version 3.04
September 10, 2013

Table of Contents
1 

Introduction .......................................................................................................................... 1 
1.1 

Overview ........................................................................................................................ 1 

1.2 

Labeling Confidential Information ................................................................................... 1 

2 

System Requirements: ......................................................................................................... 3 
2.1 

Supported Browsers ....................................................................................................... 3 

2.2 

Screen Resolution .......................................................................................................... 3 

3 

Primary Authorized Official Functions .................................................................................. 4 
3.1 

Log into Section 8(e) Notice Application ........................................................................ 4 

3.2 

Home Screen Navigation ............................................................................................... 5 

3.3 

User Management Screen ............................................................................................. 6 

3.4 

Create New Submission ................................................................................................. 8 

3.4.1 

Section 8(e) Notice Submissions Screen ................................................................. 8 

3.4.2 

Create Passphrase Screen .................................................................................... 10 

3.4.3 

Enter Passphrase Screen ...................................................................................... 11 

3.4.4 

Navigation Tree ...................................................................................................... 12 

3.4.5 

Action Bar ............................................................................................................... 14 

3.4.6 

Technical Contact Information Screen ................................................................... 16 

3.4.7 

Submitting on Behalf Of Company Screen ............................................................. 19 

3.4.8 

Submitting on Behalf of Consortium Screen .......................................................... 21 

3.4.9 

Chemical Identification Screen ............................................................................... 22 

3.4.10 

Document Management Screen ............................................................................. 29 

3.4.11 

TSCA Health and Safety Filing Substantiation Questions ...................................... 33 

3.4.12 

Substantiation Screen ............................................................................................ 33 

3.4.13 

Substantiation (continued) Screen ......................................................................... 35 

4 

Validate .............................................................................................................................. 40 

5 

Submit to EPA via CDX...................................................................................................... 42 
5.1 

Submitting Official Information Screen ......................................................................... 42 

5.2 

Submission Process: Validation Screen....................................................................... 43 

5.3 

Cross-Media Electronic Reporting Regulation (CROMERR) Certification Screen ....... 44 

5.4 

CROMERR Login Screen............................................................................................. 45 

5.5 

CROMERR Security Question Screen ......................................................................... 46 

5.6 

Submit to CDX Screen ................................................................................................. 47 

5.7 

CROMERR Submission Screen ................................................................................... 48 

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
i

6 

Download Copy of Record ................................................................................................. 50 

7 

Create an Amendment ....................................................................................................... 53 

8 

Resources .......................................................................................................................... 55 

Appendix A. Definitions, Acronyms, and Abbreviations .............................................................. 56 
Appendix B. Submission Types, Effects, and Endpoints ............................................................ 57 

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
ii

List of Exhibits
Exhibit 3-1: Chemical Information Submission System Screen .................................................... 5 
Exhibit 3-2: Section 8(e) Notice Home Screen ............................................................................. 6 
Exhibit 3-3: User Management Screen ......................................................................................... 8 
Exhibit 3-4: Section 8(e) Notice Submissions Screen ................................................................. 10 
Exhibit 3-5: Create Passphrase Screen ...................................................................................... 11 
Exhibit 3-6: Enter Passphrase Screen ........................................................................................ 12 
Exhibit 3-7: Navigation Prompt ................................................................................................... 13 
Exhibit 3-8: Navigation Tree ........................................................................................................ 14 
Exhibit 3-9: Action Bar – Validate ............................................................................................... 15 
Exhibit 3-10: Action Bar – Save .................................................................................................. 15 
Exhibit 3-11: Action Bar – Preview .............................................................................................. 15 
Exhibit 3-12: Action Bar – Submit ............................................................................................... 15 
Exhibit 3-13: Action Bar – Help Links .......................................................................................... 16 
Exhibit 3-14: Technical Contact Information Screen ................................................................... 18 
Exhibit 3-15: Submitting on Behalf of Company Screen ............................................................. 20 
Exhibit 3-16: Submitting on Behalf of Consortium Screen .......................................................... 22 
Exhibit 3-17: Chemical Identification Screen: Submission Is for a Mixture ................................. 24 
Exhibit 3-18: Chemical Identification Screen: Submission Is Not For a Mixture ......................... 25 
Exhibit 3-19: Search Substance Registry Services Pop-Up Window .......................................... 26 
Exhibit 3-20: Chemical Not Found in Substance Registry Services Search Pop-Up Window .... 28 
Exhibit 3-21: Chemical Identification Screen (Populated with chemical not found in SRS Search)29 
Exhibit 3-22: Document Management Screen ............................................................................ 30 
Exhibit 3-23: Document Management Pop-Up Window .............................................................. 32 
Exhibit 3-24: Document Management Screen (Populated) ......................................................... 33 
Exhibit 3-25: Substantiation Screen ............................................................................................ 35 
Exhibit 3-26: Substantiation (continued) (Scroll 1) ...................................................................... 38 
Exhibit 3-27: Mock-Up of Substantiation (continued) (Scroll 2) .................................................. 39 
Exhibit 4-1: Section 8(e) Notice Validation Pop-Up Window ....................................................... 41 
Exhibit 5-1: Submitting Official Information Screen ..................................................................... 42 
Exhibit 5-2: Submission Process: Validation Screen .................................................................. 43 
Exhibit 5-3: Submission Process: PDF Generation Screen ........................................................ 44 
Exhibit 5-4: CROMERR Certification Screen .............................................................................. 45 
Exhibit 5-5: CROMERR Login Screen ........................................................................................ 46 
Exhibit 5-6: CROMERR Security Question Screen ..................................................................... 47 
Exhibit 5-7: Submit to CDX Screen ............................................................................................. 48 
Exhibit 5-8: CROMERR Submission Screen .............................................................................. 49 
Exhibit 6-1: Download Copy of Record Screen ........................................................................... 51 

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
iii

Exhibit 6-2: Download Prompt Pop-Up Window ......................................................................... 51 
Exhibit 7-1: Section 8(e) Notice Submissions – Amendment ...................................................... 53 
Exhibit 7-2: Unlock Prompt Message .......................................................................................... 54 
Exhibit 8-1: Resources Screen ................................................................................................... 55 

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
iv

Page intentionally left blank

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
v

1

Introduction

1.1

Overview

This document presents the user guide for the Office of Pollution Prevention and Toxics (OPPT)
‘Section 8(e) Notice’ application submission process. This document is the user guide for the
Primary Authorized Official (AO) user of the Section 8(e) Notice tool. The Primary AO is the
person legally responsible for the submission of Section 8(e) Notice data for the reporting
company. The AO is typically a senior official for the reporting company and may be the
supervisor of the person (or persons) completing the submission.
As a Primary AO, you can create a new submission and assign Supports to edit and complete a
submission on your behalf. You are responsible for submitting all the required information and
are legally responsible for the information submitted to EPA within each Section 8(e) Notice
submission.
General information on Section 8(e) Notices is available on the TSCA Section 8(e) website
available at http://www.epa.gov/oppt/tsca8e/. Information on CDX registration, including user
roles that apply to completing a Section 8(e) Notice, is available at
http://cdx.epa.gov/About/UserGuide
Toxic Substances Control Act (TSCA) regulations require industry to provide the Environmental
Protection Agency (EPA) with documentation regarding chemical production, manufacture,
distribution, use, disposal, import, and export. As a result, the implementation of TSCA has
generated a large volume of documents submitted to the Agency by the regulated community.
TSCA Section 8(e) requires all United States chemical manufacturers, importers, processors, and
distributors to notify EPA after obtaining information on any of their chemical substances or
mixtures that reasonably supports the conclusion that these substances or mixtures present a
substantial risk of injury to health or to the environment.
Anyone subject to the TSCA Section 8(e) reporting requirement should submit a report to EPA
within thirty calendar days of obtaining said information. This information may be toxicity or
exposure data, full reports, summarized results, limited studies (e.g., range-finding studies),
preliminary results, and draft reports that constitute sufficient evidence for Section 8(e)
reporting.
General information on TSCA Section 8(e) “notice of substantial risk” is available at
http://www.epa.gov/oppt/tsca8e/
For questions concerning the TSCA Section 8(e) Notice software requirements, please contact
the Central Data Exchange (CDX) Help Desk at helpdesk@epacdx.net or call 1-888-890-1995
between the hours of 8am – 6pm Eastern Standard Time (EST). For TSCA Section 8(e) Notice
reporting requirements, please contact the TSCA Hotline at TSCA-Hotline@epamail.epa.gov or
call 202-554-1404.
1.2

Labeling Confidential Information

This user guide presents instructions and screenshots for the ‘Section 8(e) Notice’ electronic
application as if you were logged in as the Primary AO. As the Primary AO you are able to
create, modify, delete, and submit an 8(e) notice. The user may claim certain information as
Confidential Business Information (CBI). If the data is claimed as CBI, it will be treated in
accordance with Agency confidentiality regulations at 40 CFR part 2, subpart B.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
1

This TSCA Section 8(e) Notice electronic application is optional for the production and
submission of these filings. The paper option for filing will continue to be allowed.
Potential users may find that the use of this application saves time, burden and, because it is in an
electronic format, provides easy access to reporting forms. Potential users are reminded to
carefully read and follow application instructions. Persons who wish to use this application must
address all provisions in the application, including those relating to indexing information (i.e.,
company name, address, chemical name etc.) and those related to CBI submissions, including the
requirement for the submission of sanitized or redacted filings.
Please note that certain CBI claims will not be accepted if you choose to use this electronic
application for TSCA Section 8(e). For example, chemical name and/or chemical identity, if the
chemical is listed on the public portion of the TSCA Inventory, may not be claimed as CBI in a
submission using this application. Similarly, the user must enter a non-confidential study title,
because it may not be claimed as CBI. EPA does not expect that such information, if evaluated
under procedures at 40 CFR part 2, subpart B, would generally be found entitled to confidential
treatment.
If the user believes that these or other data elements should be treated as CBI, then the user may
use the paper option to file the Section 8(e) Notice and assert CBI claims.
If the user claims the ‘Mixture Percent’ or an uploaded document as CBI, they are required to
complete the appropriate substantiation questions prior to submitting their Notice to EPA. If the
user claims an uploaded document as CBI, a sanitized document must be provided.
The following fields can be claimed as CBI within the ‘Section 8(e) Notice’ application:
 Technical Contact Information
 Submitting on Behalf of Company information
 Submitting on Behalf of Consortium information
 A single chemical substance that is not on the public TSCA Inventory
 The chemical substances comprising a mixture
 The percent concentrations of individual chemical substances in a mixture
 Any document uploaded within the ‘Document Management’ pop-up window
 All responses to substantiation questions
 Submitting Official Information

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
2

2

System Requirements:

To use the Section 8(e) Notice application the following are required:
 An e-mail account
 A supported web browser (see Section Error! Reference source not found. below) with
Java Script enabled.
 Internet access
 Adobe Acrobat Reader 5.0 or higher
 CDX username and password
2.1
Supported Browsers
One of the following supported browsers is required to access the Section 8(e) Notice
application:
 Internet Explorer 7 or above
 Go to the following link to download:
http://windows.microsoft.com/en-US/internet-explorer/downloads/ie
 Mozilla Firefox 3.5 or above
 Go to the following link to download:
http://www.mozilla.com/en-US/firefox/all-older.html
 Safari 4 or above
 Go to the following link to download:
http://support.apple.com/kb/dl877
 Google Chrome
 Go to the following link to download:
http://www.google.com/chrome
2.2
Screen Resolution
 Screen resolution should be set to 1024 x 768 or greater.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
3

3

Primary Authorized Official Functions

This section describes how to:
 Access the application
 Navigate the Section 8(e) Notice ‘Home’ screen
 Assign Supports to complete a Section 8(e) Notice submission
 Start and complete a Section 8(e) Notice submission
 Submit to EPA via CDX
 Download the Copy of Record
 Create an amendment
The Primary AO is the person legally responsible for the submission of Section 8(e) Notice data
for the reporting company. The AO is typically a senior official for the reporting company and
may be the supervisor of the person (or persons) completing the submission.
As a Primary AO, you can create a new submission and assign Supports to edit and complete a
submission on your behalf. You are responsible for submitting all the required information and
are legally responsible for the information submitted to EPA within each Section 8(e) Notice
submission.
You can save the submission at any point during the data entry process. The save functionality
will allow you to return to that same submission at any point in the future. You can print the
document at any point; however, the ‘Not For Submission’ watermark will be placed on the
portable document format (PDF) document each time the submission is printed.
3.1

Log into Section 8(e) Notice Application

After you create an account in CDX and click the ‘Primary Authorized Official’ link under the
Chemical Safety and Pesticide Programs (CSPP) program service, you will be taken to the
‘Chemical Information Submission System’ screen.
Note: Information on CDX registration, including user roles that apply to completing a Section
8(e) Notice, is available at http://cdx.epa.gov/About/UserGuide

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
4

Exhibit 3-1 shows a screen capture of the ‘Chemical Information Submission System’ screen:
Exhibit 3-1: Chemical Information Submission System Screen

Navigation: Select ‘TSCA Section 8(e) Notice’ from the drop-down menu and click the ‘OK’
button to navigate to the Section 8(e) Notice ‘Home’ screen.
3.2

Home Screen Navigation

You can access the Section 8(e) Notice ‘Home’ screen by selecting ‘Section 8(e) Notice’ from
the ‘Chemical Information Submission System’ screen drop-down menu and by clicking the
‘OK’ button.
The Section 8(e) Notice ‘Home’ screen is the first screen within the Section 8(e) Notice
application. It provides you with links and tabs to access the ‘Section 8(e) Notice’ submissions,
‘User Management,’ and ‘Resources’ screens. To navigate to any of these screens, click the
screen link (highlighted in blue text), or click the screen tab (located within the application
header). The links and tabs provide the same functionality.
 Submissions: Click the ‘Submissions’ link or tab to navigate to the ‘Section 8(e) Notice’
submissions screen. You can create or modify a Section 8(e) Notice submission using the
‘Section 8(e) Notice’ submissions screen. For additional details about the ‘Section 8(e)
Notice’ submissions screen, please refer to Section 3.4.1.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
5

 User Management: Click the ‘User Management’ link or tab to navigate to the ‘User
Management’ screen. You can manage the access rights of Supports per submission using
the ‘User Management’ screen. For additional details about the ‘User Management’
screen, please refer to Section 3.3.
 Resources: Click the ‘Resources’ link or tab to navigate to the ‘Resources’ screen. You
can view the Section 8(e) Notice user guide, as well as useful links for further usability
instructions on the ‘Resources’ screen. For additional details about the ‘Resources’ screen,
please refer to Section 8.
Exhibit 3-2 shows a screen capture for the Section 8(e) Notice ‘Home’ screen:
Exhibit 3-2: Section 8(e) Notice Home Screen

Navigation: Click the ‘User Management’ link or tab to access the ‘User Management’ screen
and assign Supports.
3.3

User Management Screen

You can access the ‘User Management’ screen by clicking the ‘User Management’ link from the
Section 8(e) Notice ‘Home’ screen, or by clicking the tab located within the application header.
On the ‘User Management’ screen, you can assign your Supports to fill out Section 8(e) Notice
submissions. You have the ability to assign access to one or more Supports to modify any of the
Section 8(e) Notice submissions you have created. In order to grant a Support access to a Section
8(e) Notice submission, you must create a new submission and assign a passphrase to that
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
6

submission. You can also assign different Supports to fill out each Section 8(e) Notice
submission.
Section 8(e) Notice Submission: Submissions will not be available in this menu until one has
been created. Select a submission from the drop-down menu to begin assigning Supports. Once a
submission has been selected, the ‘Assign Users’ group box will update to display only the
Supports who have identified you as their AO during CDX registration.
Assign Users: This box shows all the Supports you can assign to complete a Section 8(e) Notice
submission for the submission selected. To move Supports from the ‘Unassigned’ group box to
the ‘Assigned’ group box, highlight the individual or multiple Supports and click the ‘add >>’
button.
 Unassigned: This box contains the registered Supports who have identified you as their
AO that can be assigned to access and edit the selected submission. To highlight multiple
Supports hold down the key on your keyboard while clicking each Support. To
highlight multiple consecutive Supports, hold down the key on your keyboard
while clicking the first and last Support.
 Assigned: This box contains the registered Supports who have been given permission, by
you, to access and edit the selected submission. To move Supports from the ‘Assigned’
group box to the ‘Unassigned’ group box, highlight individual or multiple Supports and
click the ‘<< remove’ button. To highlight multiple Supports hold down the key on
your keyboard and click each Support. To highlight multiple consecutive Supports hold
down the key on your keyboard and click the first and last Support.
When you have finished assigning Supports, click the ‘Save’ button to save the assignments.
Exhibit 3-3 shows a screen capture of the ‘User Management’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
7

Exhibit 3-3: User Management Screen

Navigation: Click the ‘Submissions’ tab located within the application header to navigate to the
‘Section 8(e) Notice’ submissions screen.
3.4

Create New Submission

As a Primary AO, you can start a new submission and assign your Supports to complete
identified submissions.
3.4.1

Section 8(e) Notice Submissions Screen

You can access the ‘Section 8(e) Notice’ submissions screen by clicking the ‘Submissions’ link
from the Section 8(e) Notice ‘Home’ screen, or by clicking the tab located within the application
header.
Only one Section 8(e) Notice submission is created per case number. Case numbers only
generate upon submission. Each column within the table of the ‘Section 8(e) Notice’ submissions
screen can be sorted by clicking the column headers.
Start a New Submission: To create a new Section 8(e) Notice submission, click the ‘Start New
Submission’ button. You will be required to create a passphrase that will be associated with that
particular submission. Make sure to create a passphrase that you will remember, as it cannot be
retrieved or reset.
Edit a Submission: To modify an existing Section 8(e) Notice submission, click the
‘Submission Alias’ link for a submission that has a status of ‘In Progress.’ You will be required

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
8

to enter the passphrase associated with that particular submission to access and continue editing
the submission.
Submitted Submission: To edit an already submitted Section 8(e) Notice submission (i.e., to
create an amendment), you must first unlock the particular submission by clicking the lock icon (
) under the ‘Action’ column. You will be required to enter the passphrase associated with that
particular submission to gain access and amend the submission. All submitted changes will be
considered an amendment. Refer to Section 7 for further instructions on creating an amendment.
The ‘Section 8(e) Notice’ submissions screen displays the following columns:
 Submission Alias: Displays the submission alias you provided within the ‘Technical
Contact Information’ screen. The ‘Submission Alias’ column will display a time stamp
unless you define a unique submission alias on the ‘Technical Contact Information’
screen. The submission alias is to help identify each Section 8(e) Notice submission.
 Case Number: Displays the case number for the submission. The case number generates
upon submission. The ‘Case Number’ column will display as blank until the Section 8(e)
Notice has been submitted successfully.
 Status: Displays the status of the Section 8(e) Notice submission. The column will display
values as either ‘In Progress’ or ‘Submitted.’
 Modify Date: Displays the date the submission was last modified.
 Submission Date: Displays the date you sent the submission to EPA. This date populates
only after you submit.
 Copy of Record: Click the ’Copy of Record’ icon to continue the download copy of
record process. The ’Copy of Record’ icon is displayed only after you submit to EPA via
CDX. The ’Copy of Record’ icon is confirmation that your submission has been
successfully received by EPA. Note that the ’Copy of Record’ icon may take 15-20
minutes to display on the ‘Section 8(e) Notice’ submissions screen. Refer to Section 6 for
further instructions on downloading the copy of record.
 Action: Displays a ‘Delete’ icon ( ) for all submissions with a status of ‘In Progress.’
Displays a ‘Lock’ icon ( ) for all submissions that have been submitted. Only an AO can
unlock a submission by clicking the ‘Unlocked’ icon ( ).
 Export Options: Displays ‘CSV,’ ‘Excel,’ ‘XML,’ and ‘PDF’ links for you to export the
‘Section 8(e) Notice’ submissions screen in one of the specified formats as an Excel
spreadsheet, Comma-Separated Values (CSV), Extensible Markup Language (XML), or
Portable Document Format (PDF).
Exhibit 3-4 shows a screen capture of the ‘Section 8(e) Notice’ submissions screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
9

Exhibit 3-4: Section 8(e) Notice Submissions Screen

Navigation: Click the ‘Start New Submission’ button to navigate to the ‘Create Passphrase’
screen.
3.4.2

Create Passphrase Screen

To start a new Section 8(e) Notice submission, click the ‘Start New Submission’ button on the
‘Section 8(e) Notice’ submissions screen. The ‘Create Passphrase’ screen allows you to create a
passphrase and associate that passphrase with your submission.
New Passphrase: To associate a passphrase with a submission, enter a passphrase that is at least
8 characters in length. To protect your account, your passphrase should contain a combination of
letters and numbers. The passphrase you create may include spaces, but should not contain
special characters (for example, +, and *). You can associate the same passphrase with multiple
submissions.
You will be responsible for remembering the passphrase and distributing it to only authorized
Supports for the submission. If you forget the passphrase, you will not be able to access the
Section 8(e) Notice submission to print, submit, or make changes. If you lose or forget the
passphrase, you must create a new submission and passphrase. For security reasons, the system
administrator does not have access to the passphrase and will not be able to retrieve it or reset it
to a new one.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
10

Exhibit 3-5 shows a screen capture of the ‘Create Passphrase’ screen:
Exhibit 3-5: Create Passphrase Screen

Navigation: Create a passphrase and click the ‘Next’ button to navigate to the ‘Technical
Contact Information’ screen.
3.4.3

Enter Passphrase Screen

To edit a submission click the ‘Submission Alias’ link for a submission with a status of ‘In
Progress’ on the ‘Section 8(e) Notice’ submissions screen. The ‘Enter Passphrase’ screen allows
you to enter the passphrase associated with the submission.
Enter Passphrase: Enter the passphrase that you originally created and associated with the
submission.
Exhibit 3-6 shows a screen capture of the ‘Enter Passphrase’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
11

Exhibit 3-6: Enter Passphrase Screen

Navigation: Enter the passphrase that you originally created and associated with the submission
and click the ‘Next’ button to navigate to the ‘Technical Contact Information’ screen.
3.4.4

Navigation Tree

The navigation tree is located on the left hand side of each screen. You can perform the
following functions using the navigation tree:
 Collapse and Expand folders: Each section of the submission falls under a collapsible
folder within the navigation tree, which allows you to save space or easily view items in
the navigation tree. When a folder is expanded, you can click the minus sign (-), the folder
icon ( ), or the folder title link to collapse that section of the navigation tree. When a
folder is collapsed, you can click the plus sign (+), the folder icon ( ), or the folder title
link to expand that section of the navigation tree. When you place your cursor over a
folder title link, it will highlight in red.
 Open and Close the Navigation Tree: To provide more visual form space, a navigation
arrow ( ) that opens and closes the navigation tree is located to the right of the navigation
tree. Click the arrow ( ) to close the navigation tree and increase the space of the form
content. Likewise, click the arrow ( ) on the closed navigation tree to open the
navigation tree.
 Navigate between screens: You can use the navigation tree to navigate between the
various screens within the application. Each screen of the submission is denoted with a
form icon ( ). You can click the form icon ( ) or the screen title link to navigate to the
selected screen. You are required to save all information entered on a particular screen
before navigating to the next screen or all entered information will be lost. A prompt will
appear after you click a link in the navigation tree indicating, ‘Are you sure you want to
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
12

leave the current page? Any unsaved changes will be lost.’ If you click the ‘OK’ button,
you will be taken to the requested screen without saving any of the data in the previous
screen. If you click the ‘Cancel’ button, the prompt will close and you will not be taken to
the requested screen.
 Add Chemical: You can click the ‘Add Chemical’ button located at the bottom of the
navigation tree to add another chemical report within a single submission. Clicking the
‘Add Chemical’ button will generate another chemical report folder containing a
‘Chemical Identification’ screen and a ‘Document Management’ screen. The system
provides a ‘Remove’ icon ( ) that allows you to remove any unwanted chemical report
folders.
Exhibit 3-7 shows a screen capture of the navigation prompt window:
Exhibit 3-7: Navigation Prompt

Exhibit 3-8 shows a screen capture of the navigation tree:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
13

Exhibit 3-8: Navigation Tree

3.4.5

Action Bar

The action bar is located at the bottom of each screen. You can perform the following functions
using the action bar:
 Validate: You can click the ‘Validate’ icon ( ) at any stage of completing a Section 8(e)
Notice submission to check for certain types of errors in a submission. A ‘Section 8(e)
Notice Validation’ pop-up window generates when you click the ‘Validate’ icon ( ). The
‘Section 8(e) Notice Validation’ pop-up window displays a report of all validation errors
relating to a failed validation. Refer to Section 4 for more information on validating a
submission.
The following exhibits, Exhibit 3-9, Exhibit 3-10, Exhibit 3-11, and Exhibit 3-12 show the
screen captures for the action bar:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
14

Exhibit 3-9: Action Bar – Validate

 Save: You can click the ‘Save’ icon ( ) at any stage of completing a Section 8(e) Notice
submission. After you click the ‘Save’ icon ( ), the data entered on the screen will save.
The ‘Save’ function does not validate any entered data.
Exhibit 3-10: Action Bar – Save

 Preview: You can click the ‘Preview’ icon ( ) at any stage of completing a Section 8(e)
Notice submission to preview the submission. After you click the ‘Preview’ icon ( ), a
watermarked PDF version of the submission will generate.
Exhibit 3-11: Action Bar – Preview

 Submit: You can click the ‘Submit’ icon ( ) to submit the Section 8(e) Notice
submission after you or the Support have completed all required sections of the Section
8(e) Notice submission process. After you click the ‘Submit’ icon ( ), the validation
process is initiated. Refer to Section 4 for further instructions on validation errors. You
can continue the submission process only after clearing all validation errors. Refer to
Section 5 for more information on submitting a Section 8(e) Notice.
Exhibit 3-12: Action Bar – Submit

 Help Links: You can click any of the ‘Help’ links, located at the bottom of each screen, at
any stage of completing a Section 8(e) Notice submission.
 If you click the ‘CDX Homepage’ link, you will be taken to the CDX Homepage.
 If you click the ‘MyCDX Homepage’ link, you will be taken to the CDX Login screen.
 If you click the ‘EPA Homepage’ link, you will be taken to the EPA Homepage.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
15



If you click the ‘Terms and Conditions’ link, you will be taken to the CDX Terms and
Conditions screen.
 If you click the ‘Privacy Notice’ link, you will be taken to the CDX Privacy and Security
Notice screen.
Exhibit 3-13 shows the screen capture of the action bar ‘Help’ links:
Exhibit 3-13: Action Bar – Help Links

3.4.6

Technical Contact Information Screen

You can access the ‘Technical Contact Information’ screen by clicking the ‘Start New
Submission’ button on the ‘Section 8(e) Notice’ submissions screen and creating a new
passphrase, or by accessing a Section 8(e) Notice submission that is in progress and entering the
passphrase associated with the selected submission.
The ‘Technical Contact Information’ screen allows you to submit on behalf of another company
or submit on behalf of a consortium. To identify if you are submitting on behalf of another
entity, the system provides the radio button for ‘This is a submission on behalf of a consortium.’
To identify if you are submitting on behalf of another company, the system provides the radio
button ‘This is a submission on behalf of another company.’ The system will not allow you to
select more than one radio button per submission.
If you are submitting on behalf of another company, select the ‘This is a submission on behalf of
another company’ radio button. This functionality has been implemented to accommodate a
company that may use an agent or another individual. If this radio button is selected, you can
enter the contact information for the manufacturing or processing establishment on whose behalf
the submission is being made into the ‘Submitting on Behalf Of Company’ screen upon clicking
the ‘Next’ button. If you select the radio button for ‘This is a submission on behalf of a
consortium,’ you are taken to the ‘Submitting on Behalf of Consortium’ screen upon clicking the
‘Next’ button.
If you are not submitting on behalf of another company or on behalf of a consortium, you must
select the ‘N/A’ radio button.
The following fields are displayed on the ‘Technical Contact Information’ screen:
 CBI: Checking this checkbox will claim the technical contact information as CBI.
 Submission Alias: This field is auto-populated with a time stamp and displays on the
‘Section 8(e) Notice’ submissions screen within the ‘Submission Alias’ column. This field
is editable should you choose to provide your own submission alias.
 N/A: Selecting the ‘N/A’ radio button allows you to signify that you are neither making a
submission on behalf of a consortium nor making a submission on behalf of another
company.
 This is a submission on behalf of a consortium: Selecting the ‘This is a submission on
behalf of a consortium’ radio button allows you to identify yourself as an individual
submitting on behalf of a consortium.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
16

 This is a submission on behalf of another company: Selecting the ‘This is a submission
on behalf of another company’ radio button allows you to identify yourself as an
individual submitting on behalf of another company.
 Copy CDX Registration: Clicking the ‘Copy CDX Registration’ button will
automatically populate the fields with your contact information provided during CDX
registration.
 Prefix: Displays all optional prefixes. If applicable, select the appropriate prefix. If you
have clicked the ‘Copy CDX Registration’ button, the fields populate with information
entered during CDX registration.
 First Name: Enter the technical contact’s first name. If you have clicked the ‘Copy CDX
Registration’ button, the fields populate with information entered during CDX registration.
This is a required field.
 Middle Initial: Enter the technical contact’s middle initial. If you have clicked the ‘Copy
CDX Registration’ button, the fields populate with information entered during CDX
registration.
 Last Name: Enter the technical contact’s last name. If you have clicked the ‘Copy CDX
Registration’ button, the fields populate with information entered during CDX registration.
This is a required field.
 Suffix: Displays all optional suffixes. If applicable, select the appropriate suffix. If you
have clicked the ‘Copy CDX Registration’ button, the fields populate with information
entered during CDX registration.
 Company Name: Enter the technical contact’s company name. If you have clicked the
‘Copy CDX Registration’ button, the fields populate with information entered during
CDX registration. This is a required field.
 Phone Number: Enter the technical contact’s daytime phone number; US or international.
If you have clicked the ‘Copy CDX Registration’ button, the fields populate with
information entered during CDX registration. This is a required field.
 Email Address: Enter the technical contact’s email address. The email address must
follow the standard email address format: john.doe@abc.com. If you have clicked the
‘Copy CDX Registration’ button, the fields populate with information entered during
CDX registration. This is a required field.
 Mailing Address 1: Enter the first line of the technical contact’s mailing address. If you
have clicked the ‘Copy CDX Registration’ button, the fields populate with information
entered during CDX registration. This is a required field.
 Mailing Address 2: Enter the second line of the technical contact’s mailing address. If
you have clicked the ‘Copy CDX Registration’ button, the fields populate with
information entered during CDX registration.
 City: Enter the city of the technical contact’s mailing address. If you have clicked the
‘Copy CDX Registration’ button, the fields populate with information entered during
CDX registration. This is a required field.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
17

 State: Enter the state of the technical contact’s mailing address. If you have clicked the
‘Copy CDX Registration’ button, the fields populate with information entered during
CDX registration. This is a required field if the ‘Country’ field is ‘United States.’
 Postal Code: Enter the postal code of the technical contact’s mailing address. If you have
clicked the ‘Copy CDX Registration’ button, the fields populate with information entered
during CDX registration. This is a required field.
 Country: Displays all available countries. Select the country of the technical contact’s
mailing address. If you have clicked the ‘Copy CDX Registration’ button, the fields
populate with information entered during CDX registration. This is a required field.
Exhibit 3-14 shows the screen capture of the ‘Technical Contact Information’ screen:
Exhibit 3-14: Technical Contact Information Screen

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
18

Navigation: If you selected the ‘This is a submission on behalf of another company’ radio
button, click the ‘Next’ button to navigate to the ‘Submitting on Behalf of Company’ screen.
You can also access this screen by clicking the ‘Submitting on Behalf of Company’ link within
the navigation tree. If you selected the ‘This is a submission on behalf of a consortium’ radio
button, click the ‘Next’ button to navigate to the ‘Submitting on Behalf of Consortium’ screen.
You can also access this screen by clicking the ‘Submitting on Behalf of Consortium’ screen. If
you selected the ‘N/A’ radio button, click the ‘Next’ button to navigate to the ‘Chemical
Identification’ screen. You can also access this screen by clicking the ‘Chemical Identification’
link within the navigation tree.
3.4.7

Submitting on Behalf Of Company Screen

You can access the ‘Submitting on Behalf Of Company’ screen by selecting the ‘This is a
submission on behalf of another company’ radio button and clicking the ‘Next’ button from the
‘Technical Contact Information’ screen. You can also access this screen by clicking the
‘Submitting on Behalf of Company’ link within the navigation tree.
The ‘Submitting on Behalf Of Company’ screen presents you with a list of fields that allows you
to input the contact information for the manufacturing or processing establishment on whose
behalf the submission is being made.
The following fields are displayed on the ‘Submitting on Behalf of Company’ screen:
 CBI: Checking this checkbox will claim the ‘Submitting on Behalf of Company’
information as CBI.
 Prefix: The ‘Prefix’ drop-down menu displays all optional prefixes. If applicable, select
the appropriate prefix.
 First Name: Enter the first name of the manufacturing or processing establishment
contact for which the submission is being made. This is a required field.
 Middle Initial: Enter the middle initial of the manufacturing or processing establishment
contact for which the submission is being made.
 Last Name: Enter the last name of the manufacturing or processing establishment contact
for which the submission is being made. This is a required field.
 Suffix: The ‘Suffix’ drop-down menu displays all optional suffixes and captures the suffix
of the manufacturing or processing establishment contact for which the submission is
being made. If applicable, select the appropriate suffix.
 Company Name: Enter the company name of the manufacturing or processing
establishment. This is a required field.
 Phone Number: Enter the daytime telephone number of the manufacturing or processing
establishment contact for whom the submission is being made; US or international. This
field does not accept dashes. This is a required field.
 Email Address: Enter the email address of the manufacturing or processing establishment
contact for which the submission is being made. The email address must follow the
standard email address format: john.doe@abc.com. This is a required field.
 Mailing Address 1: Enter the first line of the mailing address of the manufacturing or
processing establishment contact. This is a required field.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
19

 Mailing Address 2: Enter the second line of the mailing address of the manufacturing or
processing establishment contact.
 City: Enter the city of the mailing address of the manufacturing or processing
establishment contact. This is a required field.
 State: Enter the state of the mailing address of the manufacturing or processing
establishment contact. This is a required field if the ‘Country’ field is defined as ‘United
States.’
 Postal Code: Enter the postal code of the mailing address of the manufacturing or
processing establishment contact. This is a required field.
 Country: Enter the country of the mailing address of the manufacturing or processing
establishment contact. This is a required field.
Exhibit 3-15 shows the screen capture of the ‘Submitting on Behalf of Company’ screen:
Exhibit 3-15: Submitting on Behalf of Company Screen

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
20

Navigation: Click the ‘Next’ button to navigate to the ‘Chemical Identification’ screen. You can
also access this screen by clicking the ‘Chemical Identification’ link within the navigation tree.
3.4.8

Submitting on Behalf of Consortium Screen

You can access the ‘Submitting on Behalf of Consortium’ screen by selecting the ‘This is a
submission on behalf of a consortium’ radio button and by clicking the ‘Next’ button from the
‘Technical Contact Information’ screen. You can also access this screen by clicking the
‘Submitting on Behalf of Consortium’ link within the navigation tree.
The ‘Submitting on Behalf of Consortium’ screen allows you to enter contact information for
each consortium member. The system provides you with the ability to identify the consortium
name. The contact information of the logged in user will pre-populate the first consortium field
set; this information is editable. To add a consortium member, click the ‘Add’ button to display
fields that can be populated and saved. You can click the ‘Save’ button for each consortium
member added to capture all information entered on the screen. A minimum of two consortium
members must be added to pass validation.
The following fields are displayed on the ‘Submitting on Behalf of Consortium’ screen:
 CBI: Checking this checkbox will claim the ‘Submitting on Behalf of Consortium’
information as CBI.
 Consortium Name: Enter the name of the consortium.
 Prefix: The ‘Prefix’ drop-down menu displays all optional prefixes and captures the
consortium member contact’s prefix. If applicable, select the appropriate prefix.
 First Name: Enter the consortium member contact’s first name. This field is required.
 Middle Initial: Enter the consortium member contact’s middle initial.
 Last Name: Enter the consortium member contact’s last name. This field is required.
 Suffix: The ‘Suffix’ drop-down menu displays all optional suffixes and captures the
consortium member contact’s suffix.
 Company Name: Enter the consortium member contact’s company name. This field is
required.
 Phone Number: Enter the consortium member contact’s day time telephone number; US
or international. This field does not accept dashes. This field is required.
 Email Address: Enter the consortium member contact’s email address. The email address
must follow the standard email address format: john.doe@abc.com. This field is required.
 Mailing Address 1: Enter the first line of the consortium member contact’s mailing
address. This field is required.
 Mailing Address 2: Enter the second line of the consortium member contact’s mailing
address.
 City: Enter the city of the consortium member contact’s mailing address. This is a
required field.
 State: Enter the state of the consortium member contact’s mailing address. This field is
required only if the country field is set to ‘United States.’

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
21

 Postal Code: Enter the postal code of the consortium member contact’s mailing address.
This field is required.
 Country: Enter the country of the mailing address of the consortium contact. This is a
required field.
Exhibit 3-16 shows the screen captures for the ‘Submitting on Behalf of Consortium’ screen:
Exhibit 3-16: Submitting on Behalf of Consortium Screen

Navigation: Click the ‘Next’ button to navigate to the ‘Chemical Identification’ screen. You can
also access this screen by clicking the ‘Chemical Identification’ link within the navigation tree.
3.4.9
Chemical Identification Screen
You can access the ‘Chemical Identification’ screen by clicking the ‘Next’ button from the
‘Submitting on Behalf Of Company’ screen (if you selected the ‘This is a submission on behalf
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
22

of another company’ radio button), by clicking the ‘Next’ button from the ‘Submitting on
Behalf of Consortium’ screen (if you selected the ‘This is a submission on behalf of a
consortium’ radio button), or by clicking the ‘Next’ button from the ‘Technical Contact
Information’ screen (if you selected the ‘N/A’ radio button). You can also access this screen by
clicking the ‘Chemical Identification’ link within the navigation tree.
The ‘Chemical Identification’ screen provides a ‘Chemical Alias’ field to help distinguish
between chemical reports when there is more than one chemical report. If you provide a
chemical alias, the chemical alias will display within the navigation tree. If you do not provide a
chemical alias, ‘Chemical Report’ will remain as the title of each chemical report folder.
To access Substance Registry Services (SRS) you will identify if you are reporting for a mixture
by selecting the ‘Yes’ or ‘No’ radio button for ‘Is this a submission for a mixture?.’ If you
identify you are submitting for a mixture, the system provides a ‘Please provide the mixture,
compound, or product name’ optional text box. The mixture name text box does not appear if
you select ‘No’ for ‘Is this a submission for a mixture?’.
The following fields are displayed on the ‘Chemical Identification’ screen:
 Chemical Alias: The chemical alias is used to help distinguish between chemical reports
within the navigation tree when there is more than one. A chemical alias can be created for
each chemical report folder. If a chemical alias is not identified, ‘Chemical Report’ will
remain as the chemical report folder title within the navigation tree.
 This is a submission for a mixture: Selecting the ‘Yes’ radio button captures if you are
reporting for a mixture.
 Please check this checkbox if the mixture is CBI: Clicking this checkbox will claim the
entire chemical mixture as CBI. Checking the CBI checkbox will disable all individual
chemical CBI checkboxes.
 Please provide the mixture, compound, or product name: Enter the mixture,
compound, or product’s name.
 Add: Clicking the ‘Add’ button will generate a chemical substance field set.
 Search SRS: Clicking the ‘Search SRS’ button will generate a pop-up window to perform
an SRS search. Refer to Section 3.4.9.1 for further details.
 Chemical Identifying Number: Displays the chemical identifying number for the
specified chemical substance.
 Chemical Name: Displays the chemical name of the specified substance.
 Synonym: Displays the chemical synonym(s) identified by the user. Clicking the ‘Add’
icon ( ) will allow you to enter up to three synonyms for the identified chemical
substance. Click the ‘Delete’ icon ( ) to delete a synonym.
 Mixture (%): Enter the percent composition of each chemical within a mixture. This
displays only when you have identified the submission is for a mixture.
 Mixture % CBI: Checking this checkbox will claim all mixture percent information as
CBI.
Exhibit 3-17 shows the screen capture of the ‘Chemical Identification’ screen for a user reporting
for a mixture:
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
23

Exhibit 3-17: Chemical Identification Screen: Submission Is for a Mixture

 CBI: Checking the CBI checkbox will claim the chemical as CBI. The CBI checkbox only
appears if the chemical is not found on the TSCA inventory list.
 This is a submission for a mixture: Selecting the ‘No’ radio button captures that the user
is not reporting for a mixture.
 Search SRS: Clicking the ‘Search SRS’ button will generate a pop-up window to perform
an SRS search. Refer to Section 3.4.9.1 for further details.
 Chemical Identifier: Displays the chemical identifying number for the specified chemical
substance.
 Chemical Name: Displays the chemical name of the specified substance.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
24

 Synonym: Displays the chemical synonym(s) identified by the user. Clicking the ‘Add’
icon ( ) will allow you to enter up to three synonyms for the identified chemical
substance. Click the ‘Delete’ icon ( ) to delete a synonym.
Exhibit 3-18: shows the screen capture for the ‘Chemical Identification’ screen for reporting for
a single chemical substance:
Exhibit 3-18: Chemical Identification Screen: Submission Is Not For a Mixture

Navigation: Click the ‘Next’ button to navigate to the ‘Document Management’ screen. You can
also access this screen by clicking the ‘Document Management’ link within the navigation tree.
3.4.9.1

Search Substance Registry Services

Click the ‘Search SRS’ button to generate the ‘Substance Registry Services’ pop-up window.
You can search for the chemical(s) being reported by the ‘Chemical Abstract Service Registry
Number (CASRN),’ ‘CA Index Name or Other Synonym,’ ‘Accession Number,’ or ‘Generic
Name.’ After you have searched for and selected a chemical and clicked the ‘OK’ button, the
selected chemical information will populate the ‘Chemical Identification’ screen. See Section
3.4.9.2 below if you don’t know the CAS or Accession Number.
 CASRN: Enter the CASRN of the chemical.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
25

 CA Index Name or Other Synonym: Enter the CA Index Name or Other Synonym of
the chemical. Displays the following search options: ‘Contains,’ ‘Begins With,’ and
‘Matches Exactly.’
 Accession Number: Enter the accession number of the chemical. Displays the following
search options: ‘Contains,’ ‘Begins With,’ and ‘Matches Exactly.’
 Generic Name: Enter the generic name of the chemical. Displays the following search
options: ‘Contains,’ ‘Begins With,’ and ‘Matches Exactly.’
Exhibit 3-19 shows the screen capture for the ‘Search Substance Registry Services’ pop-up
window:
Exhibit 3-19: Search Substance Registry Services Pop-Up Window

Navigation: Click the ‘X’ button in the upper-right hand corner of the ‘SRS Search’ window to
close the ‘Substance Registry Services Search’ pop-up window and return to the ‘Chemical
Identification’ screen.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
26

3.4.9.2

Chemical Not Found in Substance Registry Services

You can access the ‘Chemical Not Found in Substance Registry Services’ screen by entering
known information into the SRS window and performing a search. If there are no results, a
message will be returned stating ‘There were no results returned.’ If you are sure the chemical
does not exist in SRS, please click the ‘Create New Chemical’ button to enter the chemical
information. Clicking the ‘Create New Chemical’ button on the ‘Search Substance Registry
Services’ screen takes you to the ‘Chemical Not Found in Substance Registry Services’ screen.
Click the ‘Cancel’ button to go back to the ‘Search Substance Registry Services’ screen. When
entering information into the ‘Chemical Not Found in Substance Registry Services’ screen at
least one of the following four fields is required; ‘Accession Number,’ ‘CASRN,’
‘Premanufacture Notice (PMN) Number,’ or ‘International Union of Pure and Applied
Chemistry (IUPAC) Name’
If you do not know the accession number, CASRN, PMN number, or IUPAC number, check the
‘Unknown’ checkbox. Once you check the ‘Unknown’ checkbox, the above mentioned fields are
disabled and you are only required to enter a chemical name (or descriptor).
 Unknown: Checking the ‘Unknown’ checkbox disables the ‘Accession Number,’
‘CASRN,’ ‘PMN Number,’ and ‘IUPAC Name’ fields and requires you to enter the
chemical name in the ‘Chemical Name (descriptor)’ field.
 Accession Number: If known, enter the accession number of the chemical.
 CASRN: If known, enter the CASRN of the chemical.
 PMN Number: If known, enter the PMN number of the chemical.
 IUPAC Name: If known, enter the IUPAC name of the chemical.
 Chemical Name (descriptor): Enter the chemical name/descriptor of the chemical being
reported. This is a required field when the ‘Unknown’ checkbox is checked.
Exhibit 3-20 shows the screen capture for the ‘Chemical Not Found in Substance Registry
Services’ pop-up window:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
27

Exhibit 3-20: Chemical Not Found in Substance Registry Services Search Pop-Up
Window

Navigation: Click the ‘OK’ button to populate the entered information and navigate to the
‘Chemical Identification’ screen. Click the ‘Cancel’ button to navigate to the ‘Search Substance
Registry Services’ screen.
The following fields are displayed on the ‘Chemical Identification’ screen if a chemical is not
found in SRS Search:
 CBI: Checking this checkbox will claim the chemical identity as CBI.
 Chemical Identifier: Displays which identifier you used to label the chemical. The
chemical identifier will vary depending on the data entered in the ‘Chemical Not Found In
Substance Registry Services’ screen.
 Chemical Name (descriptor): Displays the chemical name (or descriptor) of the chemical
being reported entered in the ‘Chemical Not Found In Substance Registry Services’
screen.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
28

 Synonym: Enter the chemical synonym(s).. Clicking the ‘Add’ icon ( ) will allow you
to enter up to three synonyms for the identified chemical substance. Click the ‘Delete’
icon ( ) to delete a synonym.
Exhibit 3-21 shows the screen captures for the ‘Chemical Identification’ screen when it is
populated with a chemical not found in SRS Search:
Exhibit 3-21: Chemical Identification Screen (Populated with chemical not found in SRS
Search)

Navigation: Click the ‘Next’ button to navigate to the ‘Document Management’ screen.
3.4.10

Document Management Screen

You can access the ‘Document Management’ screen by clicking the ‘Next’ button from the
‘Chemical Identification’ screen. You can also access this screen by clicking the ‘Document
Management’ link within the navigation tree.
The ‘Document Management’ screen allows you to upload documents related to Section 8(e)
Notice reporting requirements. To add Section 8(e) Notice documents, click the ‘Add Document’
button. Clicking the ‘Add Document’ button generates the ‘Document Management’ pop-up
window.
The ‘Document Management’ pop-up window allows you to attach the submission types: ‘Initial
Submission,’ ‘Follow-up Submission, and ‘Final Report Submission.’
The ‘Document Management’ table displays the ‘Report Study Title’ of the document, the
document type, the date the document was attached, and the CBI status of the document. The
system allows you to delete unwanted documents by clicking the ‘Delete’ icon ( ) located
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
29

under the ‘Action’ column. Clicking the report study title link generates the ‘Document
Management’ pop-up window. This allows you to view and edit the attached documents.
 Add Document: Clicking the ‘Add Document’ button generates the ‘Document
Management’ pop-up window.
 Report Study Title: Displays the file name and file extension of the attached file.
Clicking the file name link displays the ‘Document Management’ pop-up window and
allows you to view and edit the attached document.
 Submission Type: Displays the submission type chosen in the ‘Document Management’
pop-up window.
 Attachment Date: Displays the date the document was attached.
 CBI: Displays ‘N’ or ‘Y’ depending on if the CBI checkbox was checked.
 Action: Clicking the ‘Delete’ icon ( ) will delete the specified row and all contents
within. A warning message displays to confirm the deletion of the document.
Exhibit 3-22 shows the screen capture of the ‘Document Management’ screen:
Exhibit 3-22: Document Management Screen

The ‘Document Management’ pop-up window allows you to browse for a document from your
local hard drive and attach one document at a time. You must enter a report study title and attach
one document. Clicking the ‘Browse’ button will generate the ‘File Upload’ window on your
local hard drive. Select the document you wish to attach and click the ‘Open’ button. If a
document is marked as ‘CBI’ then a sanitized copy of the document must be attached. To save
the attached document to the ‘Document Management’ screen, click the ‘OK’ button within the
‘Document Management’ pop-up window.
 Report Study Title: Enter the report study title that is unique to this chemical report. This
field is required. This study title must be non-confidential.
 CBI: Checking the ‘CBI’ checkbox will claim the uploaded document as CBI.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
30

 Submission Type: Allows you to select the submission type for the attachments. Displays
the following options: ‘Initial Submission,’ ‘Follow-up Submission,’ and ‘Final
Submission.’
 Original Document: Clicking the ‘Browse’ button will generate the ‘File Upload’
window for you to search for a particular file on your hard drive.
 CBI: Checking the ‘CBI’ checkbox will claim the uploaded summary/abstract document
as CBI.
 Summary/Abstract: Displays ‘Yes’ and ‘No’ radio buttons. If you select the ‘Yes’ radio
button a document upload will generate. Click the ‘Browse’ button to generate the ‘File
Upload’ window for you to search for a particular file on your hard drive.
 Effects: Allows you to select the effect specific to the chemical report. Displays the
following options: ‘Health Effects,’ ‘Environmental Fate,’ ‘Ecotoxicity,’ and ‘Physical
Chemical Properties.’
 Endpoints: Allows you to select an endpoint that is specific to the chemical report. The
endpoints will be specific to the effect chosen from the ‘Effects’ drop-down menu. If no
effect is chosen, no endpoints will display.
Refer to Error! Reference source not found. for a complete list of values that are found within each
of the drop-down menus on the ‘Document Management’ pop-up window. If you have multiple
documents that share the same effects and/or endpoints, you must upload each individual
document separately and select values from the drop-down menus.
Exhibit 3-23 shows the screen capture of the ‘Document Management’ pop-up window:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
31

Exhibit 3-23: Document Management Pop-Up Window

Navigation: Upload all required documentation and click the ‘OK’ button to save all data to the
‘Document Management’ table.
Exhibit 3-24 shows the screen capture for the ‘Document Management’ screen when a document
is uploaded:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
32

Exhibit 3-24: Document Management Screen (Populated)

Navigation: Click the ‘Next’ button to navigate to the ‘Substantiation’ screen if a chemical or
document was claimed as CBI. If no chemical or document was claimed as CBI click the
‘Submit’ button to begin your submission process.
3.4.11

TSCA Health and Safety Filing Substantiation Questions

Users completing submissions within the Section 8(e) Notice application may claim
confidentiality for information within the TSCA Section 8(e) submission. If you are claiming
CBI within the TSCA Section 8(e) Notice submission, you must complete substantiation
questions and submit detailed written explanations to substantiate all CBI claims. Sanitized
copies of all documents claimed as CBI must be submitted to be placed in the TSCA public
docket.
The system allows you to complete Section 8(e) Notice substantiation for chemicals claimed as
CBI as well as documents claimed as CBI. If you only claim the submitting official information,
or the technical contact information as CBI, the system does not require the submitter to
complete substantiation.
The system takes you to the substantiation sections of the application. Each time you claim an
item as CBI that allows substantiation; the system generates an alert that informs you
substantiation must be completed for items claimed as CBI.
The system will auto-populate substantiation questions for which the information has already
been provided within the Section 8(e) Notice application. The substantiation questions are
logically separated into sections within the application to streamline the substantiation process.
Each question has functionality built into the system dependent upon your responses.
3.4.12

Substantiation Screen

The ‘Substantiation’ screen presents you with substantiation questions that pertain to the
chemical substance(s) and document(s) claimed as CBI. The ‘Substantiation’ screen presents you
with substantiation questions that allow answers to be entered as free text in text fields or by
selecting ‘Yes’ or ‘No’ radio buttons.
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
33

You can access the ‘Substantiation’ screen by clicking the ‘Next’ button from the ‘Document
Management’ screen if the chemical substance(s) has been claimed as CBI or document has been
claimed as CBI. You can also access the screen by clicking the ‘Substantiation’ link within the
navigation tree. All of the fields on the ‘Substantiation’ screens are required.
Substantiation Question 1:
Is the subject chemical on the TSCA Inventory or otherwise available in commerce in the
United States? If it is a mixture, is the mixture in commerce?


Yes/No: Allows you to identify if the substance is commercially available.



CBI: Checking this checkbox will claim the answer as CBI.

Substantiation Question 2:
Is the subject chemical or mixture expected to be subject to TSCA or is it expected to be
used for a non-TSCA purpose?


Yes/No: Allows you to identify if the substance is expected to be used for a nonTSCA purpose.



CBI: Checking this checkbox will claim the answer as CBI.

Substantiation Question 3:
Describe the substantial harmful effects that would result to your competitive position if
the CBI information is made available to the public. In your answer, explain the causal
relationship between disclosure and any resulting substantial harmful effects. Consider in
your answer such constraints as capital and marketing cost, specialized technical
expertise, or unusual processes and your competitor’s access to your customers. Address
each piece of information claimed CBI separately.


CBI: Checking this checkbox will claim the answer as CBI



A text field is available for you to answer the question.

Substantiation Question 4:
For what period do you assert your claim of confidentiality? If the claim is to extend until
a certain event or point in time, please indicate that event or time period.


CBI: Checking this checkbox will claim the answer as CBI.



Event: Allows you to enter the appropriate information to complete the question.



Date: Provides a calendar widget for you to specify the date to which the claim of
confidentiality extends.

If you answered ‘Yes’ to any of the questions above indicate why in the text box
below. Indicate below where the information appears and explain why it should
nevertheless be treated as confidential:


A text box is displayed and allows you to enter any text.

Exhibit 3-25 shows the screen captures for the ‘Substantiation’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
34

Exhibit 3-25: Substantiation Screen

Navigation: Answer all substantiation questions and click the ‘Next’ button to navigate to the
‘Substantiation (continued)’ screen.
3.4.13

Substantiation (continued) Screen

The ‘Substantiation (continued)’ screen presents you with substantiation questions that require
answers to be entered as free text in text fields or by selecting ‘Yes’ or ‘No’ radio buttons.
You can access the ‘Substantiation (continued)’ screen by clicking the ‘Next’ button from the
‘Substantiation’. All of the fields on the ‘Substantiation (continued)’ screen are required.
Substantiation Question 5A:
Do you assert that disclosure of this information you are claiming CBI would reveal any
of the following?
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
35

Confidential processes used in manufacturing the substance?
Clicking the ‘Yes’ radio button will bring up another question:


CBI: Checking this checkbox will claim the answer as CBI.

Substantiation Question 5B:
Do you assert that disclosure of this information you are claiming CBI would reveal any
of the following?
If a mixture, the actual portions of the substance in the mixture?
Clicking the ‘Yes’ radio button will bring up another question:


CBI: Checking this checkbox will claim the answer as CBI.

Substantiation Question 5C:
Do you assert that disclosure of this information you are claiming CBI would reveal any
of the following?
Information unrelated to the effects of the substance on human health or the
environment?
Clicking the ‘Yes’ radio button will bring up another question:


CBI: Checking this checkbox will claim the answer as CBI.

Substantiation Question 6A:
Does the information claimed as confidential appear or is it referred to in any of the
following:
Advertising or promotional material for the chemical substance or the resulting end
product?
Clicking the ‘Yes’ radio button brings up another set of questions:


CBI: Checking this checkbox will claim the answer as CBI.



Browse for the document(s) containing the materials as indicated above:
Browse for the specified document and click the ‘Upload’ button.

Substantiation Question 6B:
Does the information claimed as confidential appear or is it referred to in any of the
following:
Non-confidential material safety data sheets or other similar materials (such as technical
data sheets) for the substance or resulting end product (include copies of this information
as it appears when accompanying the substance and/or product at the time of transfer or
sale)?
Clicking the ‘Yes’ radio button brings up another set of questions:


CBI: Checking this checkbox will claim the answer as CBI.



Browse for the document(s) containing the materials as indicated above:
Browse for the specified document and click the ‘Upload’ button.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
36

Substantiation Question 6C:
Does the information claimed as confidential appear or is it referred to in any of the
following:
Professional or trade publications?
Clicking the ‘Yes’ radio button brings up another set of questions:


CBI: Checking this checkbox will claim the answer as CBI.



Browse for the document(s) containing the materials as indicated above:
Browse for the specified document and click the ‘Upload’ button.

Substantiation Question 6D:
Does the information claimed as confidential appear or is it referred to in any of the
following:
Any other media or publications available to the public or to your competitors?
Clicking the ‘Yes’ radio button brings up another set of questions:


CBI: Checking this checkbox will claim the answer as CBI.



Browse for the document(s) containing the materials as indicated above:
Browse for the specified document and click the ‘Upload’ button.

Substantiation Question 7:
Has EPA, another federal agency, or court made any confidentiality determination
regarding information associated with this substance?
Clicking the ‘Yes’ radio button brings up another question:


CBI: Checking this checkbox will claim the answer as CBI.



Browse for the document(s) containing the materials as indicated above:
Browse for the specified document and click the ‘Upload’ button.

If you answered 'Yes' to any of the questions above indicate in the text box below. Indicate
below where the information appears and explain why it should nevertheless be treated as
confidential: Displays a text field for you to enter the appropriate information to complete the
question.
Exhibit 3-26 and Exhibit 3-27 show the screen capture for the ‘Substantiation (continued)’
screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
37

Exhibit 3-26: Substantiation (continued) (Scroll 1)

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
38

Exhibit 3-27: Mock-Up of Substantiation (continued) (Scroll 2)

Navigation: Answer all of the substantiation questions and click the ‘Validate’ button to
navigate to the ‘Section 8(e) Notice Validation’ pop-up window.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
39

4

Validate

You can click the ‘Validate’ icon ( ) at any stage of completing a Section 8(e) Notice. The
‘Section 8(e) Notice Validation’ pop-up window is displayed when you click the ‘Validate’ icon
( ) in the action bar. The ‘Section 8(e) Notice Validation’ pop-up window displays a report of
all validation errors. During the validation process, the application validates each screen of the
Section 8(e) Notice to find missing and invalid data. For example, if a document is claimed as
CBI a sanitized version of the document must be uploaded. If a sanitized version if not uploaded,
you will be unable to complete the submission.
Validation Errors: Errors are denoted by an ‘Error’ icon ( ) and can be fixed by clicking the
error link. The links will display the Screen Title Name (e.g., Chemical Identification) and the
associated error. For example, if you claimed an uploaded document as CBI and have not
attached a sanitized copy prior to validation, the system would display a validation error similar
to ‘Document Management: You have uploaded a CBI document. A sanitized copy is
required.’ After you click a link, the main application screen will display the screen where the
error occurred so you can easily fix the error. Once you have fixed the error(s), click the
‘Validate’ icon ( ) again to refresh the ‘Section 8(e) Notice Validation’ pop-up window. If the
information you fixed passes validation, the error will be removed from the ‘Section 8(e) Notice
Validation’ pop-up window. You must fix all validation errors to successfully submit to EPA via
CDX.
Warning Messages: Warnings are denoted by a ‘Warning’ icon ( ) and can be fixed by
clicking the warning link. The links will display the Screen Title and the associated warning.
After you click a link, the main application screen will display the section where the warning
occurred so you can easily fix the warning. Once you have fixed the warning(s), click the
‘Validate’ icon ( ) again to refresh the ‘Section 8(e) Notice Validation’ pop-up window. If the
information you fixed passes validation, the warning will be removed from the ‘Section 8(e)
Notice Validation’ pop-up window. You can pass validation and continue to submit a form to
CDX with active warning messages.
You can close the ‘Section 8(e) Notice Validation’ pop-up window by clicking the ‘X’ button
located at the top right of the ‘Section 8(e) Notice Validation’ pop-up window.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
40

Exhibit 4-1 shows the screen capture for the ‘Section 8(e) Notice Validation’ pop-up window:
Exhibit 4-1: Section 8(e) Notice Validation Pop-Up Window

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
41

5

Submit to EPA via CDX

As the Primary AO, you have the ability to sign and submit Section 8(e) Notice submissions to
EPA. Any assigned Supports for your submissions do not have access rights to submit to EPA
via CDX.
Once you complete all required information and correct all items failing validation, the system
will allow you to successfully submit.
5.1

Submitting Official Information Screen

Click the ‘Submit’ icon ( ) that is located in the bottom action bar of the Section 8(e) Notice
application to access the ‘Submitting Official Information’ screen. This screen only displays to
the Primary AO upon submission.
After clicking the ‘Submit’ icon ( ), the system requires you to review your contact
information provided during CDX registration. The system also requires you to identify your job
title.
Exhibit 5-1 shows the screen capture of the ‘Submitting Official Information’ screen:
Exhibit 5-1: Submitting Official Information Screen

Navigation: Click the ‘Next’ button to continue the submission process and proceed to the
‘Submission Process: Validation’ screen.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
42

5.2

Submission Process: Validation Screen

You can access the ‘Submission Process: Validation’ screen by clicking the ‘Next’ button from
the ‘Submitting Official Information’ screen.
The ‘Submission Process: Validation’ screen will validate the information entered within the
Section 8(e) Notice submission.
Exhibit 5-2 shows the screen capture of the ‘Submission Process: Validation’ screen:
Exhibit 5-2: Submission Process: Validation Screen

After the Section 8(e) Notice submission being submitted is verified, a PDF is generated for you
to view.
Exhibit 5-3 shows the screen capture of the ‘Submission Process: PDF Generation’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
43

Exhibit 5-3: Submission Process: PDF Generation Screen

Navigation: Click the ‘Continue’ button to continue the submission process and proceed to the
‘Cross-Media Electronic Reporting Regulation (CROMERR) Certification’ screen. Click the
‘View PDF’ button to view a copy of the Section 8(e) Notice submission.
5.3

Cross-Media Electronic Reporting Regulation (CROMERR) Certification Screen

Click the ‘Continue’ button on the ‘Submission Process: PDF Generation’ screen to access the
‘Cross-Media Electronic Reporting Regulation (CROMERR) Certification’ screen.
After clicking the ‘Continue’ button on the ‘Submission Process: PDF Generation’ screen, the
system requires you to certify that the submission is CROMERR compliant. By clicking the ‘I
Certify’ button on the ‘CROMERR Certification’ screen, you authenticate all of the information
entered in the submission. Clicking the ‘Cancel’ button will allow you to navigate back to the
Section 8(e) Notice application.
Exhibit 5-4 shows the screen capture for the ‘CROMERR Certification’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
44

Exhibit 5-4: CROMERR Certification Screen

Navigation: Click the ‘I Certify’ button to continue the submission process and proceed to the
‘CROMERR Login’ screen.
5.4

CROMERR Login Screen

You can access the ‘CROMERR Login’ screen by clicking the ‘I Certify’ button on the
‘CROMERR Certification’ screen.
To submit the Section 8(e) Notice submission, log in to CDX using the credentials you provided
during CDX registration:
 Please login with your CDX password: Enter your CDX registration password.
Exhibit 5-5 shows the screen capture of the ‘CROMERR Login’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
45

Exhibit 5-5: CROMERR Login Screen

Navigation: Enter your CDX registration password and click the ‘Next’ button to navigate to the
‘CROMERR Security Question’ screen.
5.5

CROMERR Security Question Screen

You can access the ‘CROMERR Security Question’ screen by entering your CDX registration
password and clicking the ‘Next’ button on the ‘CROMERR Login’ screen.
The ‘Cross-Media Electronic Reporting Regulation (CROMERR) Security Question’ screen
randomly selects and displays one of the five CROMERR eSIG-PIN questions that you answered
on the 20-5-1 question screen during CDX registration. Answer the CROMERR security
question and click the ‘OK’ button.
Exhibit 5-6 shows the screen capture of the ‘CROMERR Security Question’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
46

Exhibit 5-6: CROMERR Security Question Screen

Navigation: Answer the security question and click the ‘Next’ button to navigate to the ‘Submit
to CDX’ screen.
5.6

Submit to CDX Screen

You can access the ‘Submit to CDX’ screen after answering the 20-5-1 security question and
clicking the ‘Next’ button on the ‘CROMERR Security Question’ screen.
On the ‘Submit to CDX’ screen, you will see a certification message. Read the message and
acknowledge it by clicking the ‘Confirm’ button. Once you have clicked the ‘Confirm’ button,
your submission will be submitted to EPA via CDX.
Exhibit 5-7 shows the screen capture of the ‘Submit to CDX’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
47

Exhibit 5-7: Submit to CDX Screen

Navigation: Click the ‘Confirm’ button to navigate to the ‘CROMERR Submission’ screen.
5.7

CROMERR Submission Screen

You can access the ‘CROMERR Submission’ screen by acknowledging the certification to
submit to EPA via CDX by clicking the ‘Confirm’ button on the ‘Submit to CDX’ screen.
On the ‘CROMERR Submission’ screen, you will see a message indicating the submission was
successfully submitted to EPA via CDX.
Exhibit 5-8 shows the screen capture of the ‘CROMERR Submission’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
48

Exhibit 5-8: CROMERR Submission Screen

Navigation: Click the ‘Finish’ button to navigate to the Section 8(e) Notice ‘Home’ screen.
Then click the ‘Submissions’ link or tab to find your locked submission. The ‘Section 8(e)
Notice’ submissions screen will display the submission with a lock icon ( ) under the ‘Action’
column and will display a status of ‘Submitted.’

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
49

6

Download Copy of Record

To download a copy of record, navigate to the ‘Section 8(e) Notice’ submissions screen and
locate a successfully completed submission with a status of ‘Submitted.’ Note that if you have
just submitted to EPA via CDX, the ‘Copy of Record’ icon may take 15-20 minutes to display.
In addition, you must refresh the ‘Section 8(e) Notice’ submissions screen by clicking your
browser’s refresh button for the ‘Copy of Record’icon to display.
After you click the ‘Copy of Record’icon, enter the passphrase associated with the submission,
and click the ‘Next’ button. The ‘Enter Passphrase’ screen requires you to enter the passphrase
originally associated with the submission. If your passphrase is entered correctly, you will be
taken to the ‘Cross-Media Electronic Reporting Regulation (CROMERR) Login’ screen where
you are required to enter the credentials you provided during CDX registration. Once you have
provided the correct CDX password, click the ‘Next’ button to navigate to the ‘Cross-Media
Electronic Reporting Regulation (CROMERR) Security Question’ screen. The ‘CROMERR
Security Question’ screen randomly selects and displays one of the five CROMERR eSIG-PIN
questions that you answered on the 20-5-1 Question screen during CDX registration. Answer the
‘CROMERR Security Question’ and click the ‘OK’ button. If your answer was correct, you will
be taken to the ‘Download Copy of Record’ screen.
The ‘Download Copy of Record’ screen displays the ‘Chemical Report Folder Alias,’ ‘File
Name,’ ‘File Type,’ ‘File Size,’ and ‘Actions’ columns in a table format. You can click the copy
of record icon to download a PDF version of the submitted Section 8(e) Notice submission and a
XML version of the Section 8(e) Notice submission. When you click the ‘Copy of Record’icon,
the system will allow you to view or download the individual files that were uploaded during the
submission process.
Exhibit 6-1 shows the screen capture of the ‘Download Copy of Record’ screen:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
50

Exhibit 6-1: Download Copy of Record Screen

Exhibit 6-2 shows a screen capture of the download prompt pop-up window:
Exhibit 6-2: Download Prompt Pop-Up Window

If you click the copy of record icon you will download the zip file of the Section 8(e) Notice
submission that contains the following:
 A PDF version of the Section 8(e) Notice submission
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
51

 An XML version of the Section 8(e) Notice submission

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
52

7

Create an Amendment

To amend a submitted Section 8(e) Notice submission, navigate to the ‘Section 8(e) Notice’
submissions screen and locate a submission with a status of ‘Submitted.’ In addition to
displaying a status of ‘Submitted’ under the ‘Status’ column, the ‘Lock’ icon ( ) will be
displayed under the ‘Action’ column. Click the ‘Lock’ icon ( ) under the ‘Action’ column to
start an amendment.
Exhibit 7-1 shows the screen capture of the ‘Section 8(e) Notice’ submissions screen:
Exhibit 7-1: Section 8(e) Notice Submissions – Amendment

Navigation: After clicking the ‘Lock’ icon ( ), you will receive a prompt to confirm the
unlock process. Once your submission is unlocked, you will have the ability to update the
information within your document. If you do not want to continue with the amendment, click the
‘Cancel’ button to cancel the amendment process and return to the ‘Section 8(e) Notice’
submissions screen. Click the ‘OK’ button to close the prompt and continue with the amendment
process.
Exhibit 7-2 shows the screen capture of the ‘Unlock Prompt’ message:

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
53

Exhibit 7-2: Unlock Prompt Message

After you click the ‘OK’ button, you will be taken to the ‘Enter Passphrase’ screen. You must
enter the passphrase originally associated with the submission to start the amendment process.
After you enter the passphrase and click the ‘Next’ button, you will be taken to the ‘Technical
Contact Information’ screen.
After a submission has been unlocked, the ‘Section 8(e) Notice’ submissions screen will display
a status of ‘In Progress’ under the ‘Status’ column, and the ‘Unlocked’ icon ( ) will display
under the ‘Action’ column; however, you will not see these changes until you navigate back to
the ‘Section 8(e) Notice’ submissions screen.

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
54

8

Resources

You can access the ‘Resources’ screen by clicking the ‘Resources’ link on the Section 8(e)
Notice ‘Home’ screen or by clicking the ‘Resources’ tab located in the application header. The
‘Resources’ screen provides you with a link to the Section 8(e) Notice user guide as well as
additional helpful links. Click the ‘User Guide’ link to access the Section 8(e) Notice user guide
document.
Toxic Substances Control Act (TSCA) Section 8(e) Notices: If you click this link, a new
internet browser window will generate displaying EPA’s TSCA Section 8(e) Notices screen.
CDX Home: If you click this link, a new internet browser window will generate displaying the
CDX Homepage.
TSCA Chemical Substances Inventory: If you click this link, a new internet browser window
for EPA's TSCA Chemical Substances Inventory screen will be displayed.
Exhibit 8-1 shows the screen capture of the ‘Resources’ screen:
Exhibit 8-1: Resources Screen

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
55

Appendix A. Definitions, Acronyms, and Abbreviations
The following table displays all the definitions, acronyms, and abbreviations used in this
document and their full name.
Definitions, Acronyms, and Abbreviations
Acronym

Full Name

AO

Authorized Official

CA

Chemical Abstract

CASRN

Chemical Abstract Service Registry Number

CBI

Confidential Business Information

CDX
CoR

Central Data Exchange
Copy of Record

CROMERR

Cross-Media Electronic Reporting Regulation Security System

CSPP

Submissions for Chemical Safety and Pesticide Programs

CSV

Comma-Separated Values

EPA

Environmental Protection Agency

EST

Eastern Standard Time

FIFRA

Federal Insecticide, Fungicide, and Rodenticide Act

IUPAC

International Union of Pure and Applied Chemistry

OPPT

Office of Pollution Prevention and Toxics

PDF

Portable Document Format

PMN

Premanufacture Notices

SRS

Substance Registry Services

TSCA

Toxic Substances Control Act

UVCB

Unknown or Variable Composition or Complex Reaction Product or Biological Material

XML

Extensible Markup Language

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
56

Appendix B. Submission Types, Effects, and Endpoints
The following appendix displays all possible options within each drop-down menu on the
‘Document Management’ pop-up window.
First Dropdown:
 Title: Submission Type
 Contains the following values
o Initial Submission
o Follow-Up Submission
o Final Submission
Second Dropdown
 Title: Summary/Abstract Submission
 Contains the following values
o Yes
o No
Third Dropdown
 Title: Effects
 Contains the following values
o Health Effect
o Ecotoxicity
o Environmental Fate
o Physical-Chemical Properties
Fourth Dropdown
 Title: Endpoints
 Contains the following values
o For Health Effect (shows when Health Effect is selected from third dropdown)
 Basic Toxic kinetics
 Dermal Absorption
 Acute Toxicity: oral
 Acute Toxicity: inhalation
 Acute Toxicity: dermal
 Acute Toxicity: other routes
 Skin irritation/corrosion
 Eye irritation
 Skin sensitization
 Respiratory sensitization
 Repeated Dose toxicity: oral
 Repeated Dose toxicity: inhalation
TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
57

 Repeated Dose Toxicity: dermal
 Repeated Dose Toxicity: other routes
 Genetic Toxicity in vitro
 Genetic Toxicity in vivo
 Carcinogenicity
 Toxicity to Reproduction
 Developmental Toxicity/teratogenicity
 Toxicity to reproduction: other studies
 Neurotoxicity
 Immunotoxicity
 Specific investigations: other studies
 Health surveillance data
 Epidemiological data
 Direct observations: clinical cases, poisoning incidents and other
 Sensitization data (humans)
 Exposure related observations in humans: other data
 Toxic effects on livestock and pets
 Additional toxicological information
 Other
o For Ecotoxicity (shows when Ecotoxicity is selected from third dropdown)
 Short-term toxicity to fish
 Long-term toxicity to fish
 Short-term toxicity to aquatic invertebrates
 Long-term toxicity to aquatic invertebrates
 Toxicity to aquatic algae and cyanobacteria
 Toxicity to aquatic plants other than algae
 Toxicity to microorganisms
 Toxicity to other aquatic organisms
 Sediment toxicity
 Toxicity to soil macroorganisms except arthropods
 Toxicity to terrestrial arthropods
 Toxicity to terrestrial plants
 Toxicity to soil microorganisms
 Toxicity to birds
 Toxicity to other above-ground organisms
 Biological effects monitoring
 Biotransformation and kinetics
 Additional ecotoxicological information
 Other

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
58

o For Environmental Fate (shows when Environmental Fate is selected from third
dropdown)
 Photo transformation in air
 Hydrolysis
 Photo transformation in water
 Photo transformation in soil
 Biodegradation in water: screening test
 Biodegradation in water and sediment: simulation tests
 Biodegradation in soil
 Mode of degradation in actual use
 Bioaccumulation: aquatic/sediment
 Bioaccumulation: terrestrial
 Adsorption/desorption
 Henry's Law constant
 Distribution Modeling
 Other Distribution Data
 Monitoring Data
 Field Studies
 Additional Information on Environmental Fate and Behavior
 Other
o For Physical-Chemical Properties (shows when Physical-Chemical Properties is
selected from third dropdown)
 Appearance/Physical
 Melting Point
 Boiling Point
 Density
 Particle size distribution
 Vapor Pressure
 Partition Coefficient
 Water Solubility
 Solubility in Organic Solvent
 Surface Tension
 Flash Point
 Auto Flammability
 Flammability
 Explosiveness
 Oxidizing Properties
 Oxidation Reduction Potential
 Stability in organic solvents and identity of relevant degradation products
 Storage stability and reactivity towards container material

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
59








Stability: thermal, sunlight, metals
pH
Dissociation constant
Viscosity
Additional physic-chemical information
Other

TDD 9 21 OPPT MTS Section 8(e) Notice User Guide
Primary Authorized Official

September 10, 2013
60