Guidance On Meetings With Industry And Investigators On The Research And Development Of Tobacco Products

GUIDANCE ON MEETINGS WITH INDUSTRY AND INVESTIGATORS ON THE RESEARCH AND DEVELOPMENT OF TOBACCO PRODUCTS

Guidance_for_Industry_Investigators_Meetings_with_Industry_and_Investigators_on_the_Research_and_Development_of_Tobacco_Products

GUIDANCE ON MEETINGS WITH INDUSTRY AND INVESTIGATORS ON THE RESEARCH AND DEVELOPMENT OF TOBACCO PRODUCTS

OMB: 0910-0731

Document [pdf]
Download: pdf | pdf
Guidance for Industry and Investigators 

Meetings with Industry and 

Investigators on the Research and 

Development of Tobacco Products 


Written comments may be submitted at any time for Agency consideration to the Division of
Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Room
1061, Rockville, MD, 20852. Alternatively, electronic comments may be submitted to
http://www.regulations.gov. All comments should be identified with the docket number listed in
the notice of availability that publishes in the Federal Register.
For questions regarding this guidance, contact the Center for Tobacco Products at (Tel) 1-877CTP-1373 (1-877-287-1373) Monday-Friday, 9:00 a.m. – 4:00 p.m. EDT.
Additional copies are available online at
http://www.fda.gov/TobaccoProducts/GuidanceComplianceRegulatoryInformation/default.htm.
You may send an e-mail request to SmallBiz.Tobacco@fda.hhs.gov to receive an electronic copy
of this guidance. You may send a request for hard copies to U.S. Food and Drug Administration,
Center for Tobacco Products, Attn: Office of Small Business Assistance, 9200 Corporate Blvd.,
Rockville, MD 20850.

U.S. Department of Health and Human Services 

Food and Drug Administration 

Center for Tobacco Products 


Contains Nonbinding Recommendations

Table of Contents
I. 

INTRODUCTION............................................................................................................. 1
 

II. 

BACKGROUND ............................................................................................................... 2
 

III. 

DEFINITIONS .................................................................................................................. 3
 

A.  Tobacco Product ............................................................................................................................ 3
 
B. 

New Tobacco Product.................................................................................................................... 3
 

C.  Substantially Equivalent or Substantial Equivalence................................................................. 3
 

IV. 

DISCUSSION .................................................................................................................... 4
 

A.  What is the scope of this guidance?.............................................................................................. 4
 
B. 

Which FDA staff would likely attend this meeting? ................................................................... 4
 

C.  How do I request a meeting?......................................................................................................... 4
 
D.  When should I submit my meeting request? ............................................................................... 4
 
E. 

What should I include in my meeting request? ........................................................................... 4
 

F. 

When should I expect FDA to respond to my request? .............................................................. 5
 

G.  If FDA denies my initial meeting request, can I resubmit my request?.................................... 5
 
H.  Could FDA decide that a meeting is unnecessary? ..................................................................... 5
 
I. 

Who will be my point of contact for the meeting? ...................................................................... 5
 

J. 

Is there any additional information that I should submit prior to the scheduled meeting? ... 6
 

K.	  What should I include in my meeting information package? .................................................... 6
 
L.	  Where do I send my meeting requests and meeting information packages?............................ 7
 
M.	  What if I am unable to provide adequate supporting documentation in my meeting 

information package within 45 days prior to the scheduled meeting? ...................................... 8
 
N.	  If my initial meeting request is postponed or canceled, can I resubmit my request? .............. 8
 
O.	  What, if anything, should I bring to the meeting? ...................................................................... 8
 
P.	 

How will the meeting be conducted? ............................................................................................ 8
 

Q.	  Will FDA provide any documentation to summarize the meeting? .......................................... 8
 
R.	  What should I do if I have a question or concern regarding the official meeting minutes? ... 8
 
S.	 

Can I submit or discuss confidential information with FDA prior to, during, or after the 

meeting? .......................................................................................................................................... 9
 

i

Contains Nonbinding Recommendations

Guidance for Industry and Investigators1
Meetings with Industry and Investigators on 

the Research and Development of Tobacco 

Products 

This guidance represents the Food and Drug Administration’s (FDA’s) current thinking on this topic. It
does not create or confer any rights for or on any person and does not operate to bind FDA or the public.
You can use an alternative approach if the approach satisfies the requirements of the applicable statutes
and regulations. If you want to discuss an alternative approach, contact the FDA staff responsible for
implementing this guidance. If you cannot identify the appropriate FDA staff, call the appropriate
number listed on the title page of this guidance.

I.

INTRODUCTION

This guidance is intended to assist tobacco manufacturers, importers, researchers, and/or
investigators who seek meetings with staff of FDA’s Center for Tobacco Products (CTP),
relating to their plans to conduct research to inform the regulation of tobacco products or support
the development or marketing of tobacco products. This guidance document discusses, among
other things:




What information FDA recommends you include in a meeting request,
How and when to submit a request, and
What information FDA recommends you submit prior to the meeting.

This guidance does not pertain to other types of meetings or meeting requests other than those
described throughout this document. FDA’s guidance documents, including this guidance, do
not establish legally enforceable responsibilities. Instead, guidances describe the Agency’s
current thinking on a topic and should be viewed only as recommendations, unless specific
regulatory or statutory requirements are cited. The use of the word should in Agency guidances
means that something is suggested or recommended, but not required.

1

This guidance was prepared by the Office of Science and Office of Regulations in the Center for Tobacco Products
at FDA.

1


Contains Nonbinding Recommendations

II.

BACKGROUND




You must generally obtain an order from FDA authorizing the commercial marketing of a new
tobacco product, including when you modify a tobacco product, before the product may be
introduced or delivered for introduction into interstate commerce (section 910(a)(2) of the Federal
Food, Drug, & Cosmetic Act (FD&C Act) (21 U.S.C. 387j(a)(2))). Modification includes “a change
in design, any component, any part, or any constituent, including a smoke constituent, or in the
content, delivery, or form of nicotine, or any other additive or ingredient” (section 910(a)(1)(B)).

To introduce or deliver for introduction a new tobacco product into interstate commerce, there
must be:




A marketing authorization order issued by FDA for the tobacco product under section
910(c)(1)(A)(i) of the FD&C Act;
An order issued by FDA and in effect for the tobacco product, finding it to be
substantially equivalent under section 910(a)(2)(A)(i) of the FD&C Act; or
A written finding from FDA that the tobacco product is exempt from the requirement to
obtain a substantial equivalence order granted under 21 CFR 1107.1.

For information on how to submit a substantial equivalence report under section 905(j) of the
FD&C Act (21 U.S.C. 387e(j)), see FDA’s guidance for industry Section 905(j) Reports:
Demonstrating Substantial Equivalence for Tobacco Product.2 For information on how to
request an exemption from the substantial equivalence requirements, see FDA’s final rule
“Exemptions from Substantial Equivalence Requirements for Tobacco Products” (76 FR 38961;
July 5, 2011).3
Furthermore, modified risk tobacco products (MRTPs) are tobacco products that are sold or
distributed for use to reduce harm or the risk of tobacco-related disease associated with
commercially marketed tobacco products. Before an MRTP can be introduced or delivered for
introduction into interstate commerce, an order from FDA under section 911(g) of the FD&C
Act must be in effect with respect to the tobacco product.
FDA staff intends to participate in many meetings with industry and investigators who seek
assistance relating to the research and development of particular tobacco products. Because
these meetings often represent important opportunities in the regulatory process, it is important
that there are efficient, consistent procedures for the timely and effective conduct of such
meetings. This guidance is intended to provide consistent principles and procedures to promote
well-managed meetings pertaining to tobacco product research and development.

2

Available on the Internet at
http://www.fda.gov/TobaccoProducts/GuidanceComplianceRegulatoryInformation/default.htm
3
Available on the Internet at http://www.gpo.gov/fdsys/pkg/FR-2011-07-05/pdf/2011-16766.pdf.

2


Contains Nonbinding Recommendations
III.

DEFINITIONS

This section provides definitions of certain terms used in this guidance.
A.

Tobacco Product

Tobacco product means “any product made or derived from tobacco that is intended for human
consumption, including any component, part, or accessory of a tobacco product (except for raw
materials other than tobacco used in manufacturing a component, part, or accessory of a tobacco
product)” (section 201(rr)(1) of the FD&C Act (21 U.S.C. 321(rr)(1))). Thus, the term is not
limited to products containing tobacco, but also includes components, parts, or accessories of
tobacco products, whether they are sold for further manufacturing or for consumer use. For
example, cigarettes, rolling papers and filters are tobacco products, whether they are sold to
consumers for use with roll-your-own tobacco or are sold for further manufacturing into a
product sold to a consumer, such as a cigarette. This term does not include an article that is a
drug, a device, or a combination product as defined in the FD&C Act (section 201(rr)(2) of the
FD&C Act (21 U.S.C. 321(rr)(2))).
B.

New Tobacco Product

New tobacco product means “any tobacco product (including those products in test markets) that
was not commercially marketed in the United States as of February 15, 2007; or any
modification (including a change in design, any component, any part, or any constituent,
including a smoke constituent, or in the content, delivery or form of nicotine, or any other
additive or ingredient) of a tobacco product where the modified product was commercially
marketed in the United States after February 15, 2007” (section 910(a)(1) of the FD&C Act).
C.

Substantially Equivalent or Substantial Equivalence

The terms substantially equivalent and substantial equivalence are defined at section
910(a)(3)(A) of the FD&C Act as follows:
In this section and section 905(j), the term “substantially equivalent” or “substantial
equivalence” means, with respect to the tobacco product being compared to the predicate
tobacco product, that the Secretary by order has found that the tobacco product—
(i) has the same characteristics as the predicate tobacco product; or
(ii) has different characteristics and the information submitted contains information,
including clinical data if deemed necessary by the Secretary, that demonstrates that it is
not appropriate to regulate the product under [section 910 of the FD&C Act] because the
product does not raise different questions of public health.

A tobacco product may not be found to be substantially equivalent to a predicate tobacco product
that has been removed from the market at the initiative of the FDA or that has been determined
by a judicial order to be misbranded or adulterated (section 910(a)(3)(C) of the FD&C Act).

3


Contains Nonbinding Recommendations
IV.

DISCUSSION
A.

What is the scope of this guidance?

This guidance is intended to assist tobacco manufacturers, importers, researchers, and/or
investigators who seek meetings with CTP regarding their research and development plans
related to tobacco products.
B.

Which FDA staff would likely attend this meeting?

Staff from FDA’s CTP would attend this meeting. Staff from other parts of FDA may also
participate as appropriate.
C.

How do I request a meeting?

Any tobacco product manufacturer, researcher, importer, or investigator involved in the
development or marketing of a tobacco product, or their representatives, should submit a written
meeting request to the Director, Office of Science, CTP, at FDA. The request should be
prominently identified as “OS Meeting Request” and can be sent by mail, courier, or securely
transmitted electronically via the FDA Electronic Submissions Gateway (ESG) and the
eSubmitter tool. Please refer to section IV.L in this document for the mailing address.4
D.

When should I submit my meeting request?

A meeting request usually should be submitted prior to filing a tobacco product submission.
Occasionally, a meeting request is submitted during the review of a submission. For example, an
applicant can request a meeting to discuss the appropriate design of postmarketing studies during
the review of a pending modified risk tobacco product application (MRTPA).
E.

What should I include in my meeting request?

A meeting request should include adequate information for FDA to determine the potential
utility of the meeting and to identify appropriate FDA staff to discuss the proposed agenda items.
A meeting request should include the following information:
1.	
2.	
3.	
4.	
5.	

Product name and FDA-assigned Submission Tracking Number (if applicable)
Product category (e.g., cigarettes, smokeless tobacco) (if applicable)
Product use (indicate for consumer use or for further manufacturing)
Contact information for individual or company requesting the meeting
The type of meeting being requested (e.g., tobacco product application, such as a
premarket tobacco application or MRTPA, or research regarding the development of
a tobacco product)

4

Please refer to the ESG website instructions for setting up a WebTrader account at:
http://www.fda.gov/ForIndustry/ElectronicSubmissionsGateway/ucm114831.htm. Information about the eSubmitter
tool can be found at: http://www.fda.gov/ForIndustry/FDAeSubmitter/ucm189469.htm.

4


Contains Nonbinding Recommendations
6.	 A brief statement of the purpose of the meeting, which could include a discussion of
the types of studies or data to be discussed at the meeting, the general nature of the
primary questions to be asked, and where the meeting fits in the overall product
development plans
7.	 A draft list of the specific objectives/outcomes expected from the meeting
8.	 A preliminary proposed agenda, including estimated amounts of time needed for each
agenda item and designated speaker(s)
9.	 A draft list of specific questions, grouped by discipline
10. A list of all individuals (including titles and responsibilities) who will attend meeting
on your behalf
11. The approximate date on which supporting documentation (i.e., the information
package described in section IV.K of this document) likely will be received by FDA
12. Suggested format of the meeting (e.g., conference call, in person at FDA offices,
video conference) and suggested dates and times for the meeting (note that generally
a meeting will be scheduled for approximately 1 – 1.5 hours)
F.

When should I expect FDA to respond to my request?

FDA generally intends to respond in writing within 21 calendar days of receipt of the meeting
request. If FDA agrees to the meeting, the written response should include:
	 the date, time, and place of the meeting,
	 the expected FDA participants, and
	 instructions for submitting the meeting information package.
If a meeting request is denied, the response should include a clear explanation of the reason(s)
for the denial (e.g., the meeting request did not provide enough information for FDA to
determine the utility of the meeting).
G.

If FDA denies my initial meeting request, can I resubmit my request?

If FDA denies your initial request, FDA intends to consider a subsequent meeting request to be a
new request.
H.

Could FDA decide that a meeting is unnecessary?

FDA may determine that a meeting is unnecessary and, instead, submit written responses to
questions contained in the meeting request. If you believe that the responses are insufficient, you
can submit a subsequent request for a meeting.
I.

Who will be my point of contact for the meeting?

FDA’s response to your meeting request should list the name and contact information for an
employee of CTP’s Office of Science, which will likely be a Regulatory Health Project Manager.
This employee will be your point of contact for additional questions regarding the meeting.

5


Contains Nonbinding Recommendations

J. 	

Is there any additional information that I should submit prior to the
scheduled meeting?

If FDA schedules the meeting, we recommend that you submit a “meeting information package”
at least 45 days prior to the scheduled meeting. You can also submit this package with the
meeting request. However, if this information changes prior to the scheduled meeting, you
should update the information accordingly. If these changes are voluminous and/or complex,
FDA may choose to reevaluate whether a meeting or a written response is appropriate and/or
postpone the meeting to give staff appropriate time to review the new materials.
K. 	

What should I include in my meeting information package?

Your meeting information package should include summary information relevant to your
product(s) and the proposed agenda. Full study reports or detailed data generally are not
appropriate for meeting packages; the summarized material should describe the design, conduct,
analysis, and results of relevant studies and clinical trials with some degree of quantification. The
pre-specified study endpoints should be stated, as should whether endpoints were altered or
analyses changed. Also, merely describing a result as significant does not provide enough
information for FDA to give good advice or identify important problems the requestor may have
missed.
To facilitate FDA’s review of your meeting information package, we suggest you organize the
contents according to the proposed agenda. The meeting package should be a sequentially
paginated document (individual sections can be numbered separately) with a table of contents,
appropriate indices, appendices, cross references or hyperlinking, and tabs differentiating
sections.
The meeting information package should support the intended meeting objectives. Although the
contents of the meeting information package will vary depending on the product, the phase of the
tobacco product development, and issues to be discussed, the meeting information package
generally should include the following (as applicable):
1.	
2.	
3.	
4.	
5.	

Product name and FDA-assigned Submission Tracking Number
Product category
Product use (indicate for consumer use or further manufacturing)
Product type (e.g., finished tobacco product or component, part, accessory)
A brief statement of the purpose of the meeting, which could include a discussion of the
types of studies or data that you intend to discuss at the meeting, the general nature of
your critical questions, and where the meeting fits in overall development plans
6.	 A list of the specific objectives/outcomes expected from the meeting
7.	 An agenda, including estimated amounts of time needed for each agenda item and 

designated speaker(s) 

8.	 A list of specific questions grouped by discipline

6


Contains Nonbinding Recommendations
9.	 Chemistry, manufacturing, and control data summary
10. Preclinical data summary
11. Clinical data summary
12. Behavioral and product use data summary
13. User and non-user perception data summary
14. Investigational plans for studies and surveillance of the tobacco product, including a
summary of proposed study protocols containing the following information:
a.	 Study objective(s),
b.	 Study hypotheses,
c.	 Study design,
d.	 Study population (inclusion/exclusion criteria, comparison group(s)),
e.	 Human subject protection information, including Institutional Review Board (IRB)
information,
f.	 Primary and secondary endpoints (definition and success criteria),
g.	 Sample size calculation,
h.	 Data collection procedures,
i.	 Duration of follow-up and baseline and follow-up assessments, and
j.	 Data analysis plan(s).
The content of your meeting information package should include the information necessary to
support your meeting purpose and objectives. Although the request for a meeting should include
items 1 through 8 above (as applicable), these items should be updated in the information
package if necessary to reflect the most current and accurate information available to you. For
specific guidance regarding the contents of the information package, you should contact your
CTP point of contact.
L.

Where do I send my meeting requests and meeting information packages?

You should send your request for a meeting and meeting information package to FDA’s Center
for Tobacco Products at the following address:
Center for Tobacco Products

Attn: Document Control Center, Room 020J 

9200 Corporate Boulevard 

Rockville, MD 20850


If you have a WebTrader account, you can send your request and meeting information package
via the FDA ESG (www.fda.gov/esg). We encourage you to submit the meeting information
package electronically. To facilitate the meeting process, we strongly suggest that copies of
meeting information packages provided in electronic format also be provided in paper format.
Your CTP point of contact will advise you on the number of paper copies you should submit for
the planned FDA meeting attendees.

7


Contains Nonbinding Recommendations
M. 	

What if I am unable to provide adequate supporting documentation in my
meeting information package within 45 days prior to the scheduled meeting?

FDA may decide to postpone or cancel a meeting if we have not received adequate supporting
documentation for a productive meeting within this timeframe. You should get in touch with
your point of contact as soon as possible if you will not be able to meet this deadline.
N. 	

If my initial meeting request is postponed or canceled, can I resubmit my
request?

FDA intends to take reasonable steps to avoid postponing or canceling a scheduled meeting. If
you cancel a previously scheduled meeting, FDA will consider a subsequent meeting request to
be a new request.
O. 	

What, if anything, should I bring to the meeting?

At least two business days prior to the scheduled meeting, you should provide your point of
contact with an electronic copy of your presentation. Alternatively, you can bring to the meeting
paper copies for all attendees. Your CTP point of contact will advise you on the number of
paper copies you should submit for the planned FDA meeting attendees.
P. 	

How will the meeting be conducted?

Your presentations should be limited to information included in the information package. FDA
staff may not be able to provide comments on new data.
Before the end of the meeting, attendees should summarize the important discussion points,
agreements, clarifications, and action items. FDA intends to ask the meeting participant(s) to
present the summary to ensure that there is mutual understanding of meeting outcomes and
actions. FDA staff should then add or further clarify any important points not covered in the
summary. The summary can be done at the end of the meeting or after the discussion of each
question.
Q. 	

Will FDA provide any documentation to summarize the meeting?

Documentation of meeting outcomes, agreements, disagreements, and action items is helpful for
ensuring that this information is preserved for meeting attendees and future reference. FDA
intends to provide the official minutes of the meeting to summarize the important discussion
points, decisions, recommendations, agreements, disagreements, issues for further discussion,
and action items. We intend to send you the official minutes within 45 days of the meeting.
R. 	

What should I do if I have a question or concern regarding the official
meeting minutes?

If you have a question or concern regarding the meeting minutes, you should get in touch with
your CTP point of contact. If you disagree with the accuracy of FDA’s minutes, you should send

8


Contains Nonbinding Recommendations
your comments and suggested changes, including your recommendations and rationale, to your
point of contact for our consideration. If FDA deems it appropriate to change the official
minutes, the Agency intends to document this change in an addendum to the official minutes.
FDA also intends to include any areas of continued objection to the accuracy of the minutes in
such an addendum.
S. 	

Can I submit or discuss confidential information with FDA prior to, during,
or after the meeting?

You may choose to submit nonpublic, trade secret, or confidential commercial information prior
to a meeting or to discuss such information prior to, during, or after the meeting. FDA abides by
the federal laws governing confidentiality, including sections 301(j) and 906(c) of the FD&C Act
(21 U.S.C. 331(j) and 387f(c)), the Trade Secrets Act (18 U.S.C. 1905), and the Freedom of
Information Act (5 U.S.C. 552), as well as FDA’s implementing regulations.

9



File Typeapplication/pdf
File TitleMeetings with Industry and Investigators on the Research and Development of Tobacco Products
SubjectMeetings with Industry and, Investigators on the Research and, Development of Tobacco Products
AuthorFDA/CTP
File Modified2012-10-16
File Created2012-05-16

© 2024 OMB.report | Privacy Policy