13-4-3190 Foreign Producer Questionnaire

OMB No. 3117-0016/USITC No. 14-4-3190; Expiration Date: 6/30/2014
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
DIFFUSION-ANNEALED, NICKEL-PLATED STEEL FROM JAPAN

This questionnaire must be received by the Commission by no later than January

31, 2014

See the Instruction Booklet for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade
Commission in connection with its antidumping investigation concerning diffusion-annealed, nickelplated steel flat-rolled products (“diffusion-annealed, nickel-plated steel”) from Japan (Inv. No. 731-TA1206 (Final)). The information requested in the questionnaire is requested under the authority of the
Tariff Act of 1930, title VII.

Name of firm
Address
World Wide Web address
Has your firm produced or exported diffusion-annealed, nickel-plated steel (as defined in the instruction booklet)
at any time since January 1, 2011?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Read the instruction booklet carefully, complete all parts of the questionnaire, and return the entire
questionnaire to the Commission so as to be received by the date indicated above)

Data reported in this questionnaire relate to (Check one):
JAPAN
Return questionnaire via the U.S. International Trade Commission Drop Box by clicking
on the following link: https://dropbox.usitc.gov/oinv/. (use the following PIN: DANP)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge
and belief and understand that the information submitted is subject to audit and verification by the Commission.
By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I acknowledge that information submitted in this questionnaire response and throughout this proceeding may be used by the
Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or
maintaining the records of this proceeding or related proceedings for which this information is submitted, or in internal audits and
proceedings relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all
contract personnel will sign non-disclosure agreements.

Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Email address
Fax:

Business Proprietary
Foreign Producers’/Exporters’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 2

PART I.—GENERAL INFORMATION
The questions in this questionnaire have been reviewed with market participants to ensure that issues of
concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as
possible. Public reporting burden for this questionnaire is estimated to average 20 hours per response,
including the time for reviewing instructions, searching existing data sources, gathering the data needed,
and completing and reviewing the questionnaire. Send comments regarding the accuracy of this burden
estimate or any other aspect of this collection of information, including suggestions for reducing the
burden, to the Office of Investigations, U.S. International Trade Commission, 500 E Street, SW,
Washington, DC 20436.
I-1a. OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of preparing the reply to this questionnaire and completing the form.
Hours

I-1b.

I-2.

I-3.

OMB feedback.--We are interested in any comments you may have for improving this
questionnaire in general or the clarity of specific questions. Please attach such comments to your
firm’s response or send them to the above address.
Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire (see page 3 of the instruction booklet for reporting guidelines). If your firm is
publicly traded, please specify the stock exchange and trading symbol.

U.S. importers.--Please provide the names, street addresses (not P.O. boxes), contacts, telephone
numbers, and e-mail addresses of the FIVE largest U.S. importers of your firm’s diffusionannealed, nickel-plated steel in 2013.

Importer’s name

1

Dollars

Contact person

Email

Telephone

Street address (not P.O.
box), city, state, and zip
code

Street Address

,
City

2

State

Street Address

,
City

3

State

,
State

Zip Code

Street Address

,
City

5

Zip Code

Street Address
City

4

Zip Code

State

Zip Code

Street Address

,
City

State

Zip Code

Share of
your firm’s
2013
exports (%)

Business Proprietary
Foreign Producers’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 3

PART I.--GENERAL INFORMATION--Continued
I-4.

Related U.S. producers.--Does your firm or any related firm produce, have the capability to
produce, or have any plans to produce diffusion-annealed, nickel-plated steel in the United States
or other countries?
No

I-5.

Yes--Please name the firm(s) and country(ies) below and, if U.S. producer(s),
ensure that they complete the Commission’s producer questionnaire
(contact Nathanael Comly (nathanael.comly@usitc.gov) for copies of
that questionnaire).

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
diffusion-annealed, nickel-plated steel into the United States?
No

Yes--Please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire (contact Nathanael Comly
(nathanael.comly@usitc.gov) for copies of that questionnaire).

Business Proprietary
Foreign Producers’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 4

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Nathanael Comly
(nathanael.comly@usitc.gov; 202-205-3174). Supply all data requested on a calendar-year basis.
II-1.

Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted in
part II.
Name
Title
Email
Telephone
Fax

II-2.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of diffusion-annealed, nickel-plated steel since January 1,
2011.
(check as many as appropriate)
plant openings ..............................

plant closings................................

relocations ....................................

expansions ....................................

acquisitions...................................

consolidations...............................

prolonged shutdowns or
production curtailments................
revised labor agreements ..............

other (e.g., technology) ................

(please describe)

Business Proprietary
Foreign Producers’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 5

PART II.--TRADE AND RELATED INFORMATION--Continued
II-3.

Anticipated changes in operations.--Does your firm anticipate any changes in the character of
its operations or organization (as noted above) relating to the production of diffusion-annealed,
nickel-plated steel in the future?
No

II-4a.

Yes–Supply details as to the time, nature, and significance of such changes
and provide underlying assumptions, along with relevant portions of
business plans or other supporting documentation that address this
issue. Include in the response a specific projection of your firm’s
capacity to produce diffusion-annealed, nickel-plated steel (in
short tons) for 2014 and 2015.

Production and capacity.--Please report your firm’s production of diffusion-annealed, nickelplated steel, production of products made on the same equipment and machinery used to produce
diffusion-annealed, nickel-plated steel, and the combined production capacity on this shared
equipment and machinery in the periods indicated.
(Quantity in short tons)
Item

Calendar years
2011

2012

2013

Overall production capacity
1

Production of subject merchandise:
Diffusion-annealed, nickel-plated steel
Production of nonsubject
merchandise:
2
Other nickel-plated steel
Other

3

Nonsubject merchandise subtotal
Total
1

Subject merchandise should equal production data reported in II-8.
Not diffusion-annealed.
3
Please identify:
2

.

II-4b.

Operating parameters.--The production capacity (see definitions in instruction booklet) reported in
II-4a is based on operating
hours per week,
weeks per year.

II-4c.

Capacity calculation.--Please describe the methodology used to calculate overall production capacity
reported in II-4a, and explain any changes in reported capacity.

Business Proprietary
Foreign Producers’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 6

PART II.--TRADE AND RELATED INFORMATION--Continued
II-4d.

Production constraints.--Please describe the constraint(s) that set the limit(s) on your firm’s
production capacity.

II-4e.

Product shifting.--Please describe the constraint(s) that set the limit(s) on your firm’s ability to shift
production capacity between products.

II-5.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of diffusion-annealed, nickel-plated steel?
percent

II-6.

Inventories in the United States.--Has your firm, since 2011, maintained any inventories of
diffusion-annealed, nickel-plated steel in the United States (not including inventories held by
firms identified in question I-3)?
No

Yes--Report the quantity of such end-of-period inventories below.
(Quantity in short tons)
Item

2011

2012

2013

Inventory

II-7.

Third country trade actions.--Is the diffusion-annealed, nickel-plated steel exported by your
firm subject to antidumping/countervailing duty/safeguard findings, remedies, or proceedings?
No

Yes--List the products(s), countries affected, and the date of such
findings/remedies/proceedings.
Product

Country

Date

Business Proprietary
Foreign Producers’ Questionnaire - Diffusion-Annealed, Nickel-Plated Steel

Page 7

PART II.--TRADE AND RELATED INFORMATION--Continued
II-8.

Trade data.--Report your firm’s production capacity, production, shipments, and inventories
related to the production of diffusion-annealed, nickel-plated steel in your establishment(s) in
Japan during the specified periods. (See definitions in the instruction booklet.)

Japan
Quantity (in short tons)
1

Actual experience
Item

2011

2012

Projections
2013

2014

2015

Average production capacity (A)
2

Beginning-of-period inventories (B)
3

Production (C)
Home market shipments:
Internal consumption/transfers (D)
Commercial shipments (E)
4

Exports to the United States (F)
5

Exports to all other markets (G)
Total exports (H)
(should equal F+G)
Total shipments (I)
(should equal D+E+F+G)
End-of-period inventories (J)
1

Please explain the basis for your firm’s projections.

2

Reconciliation of data.—The data should reconcile as follows: B + C - I = J. Do these data reconcile?

Yes

No

Also, end-of-period inventories should equal the beginning-of-period inventories reported in the subsequent calendar year (i.e.,
Yes
No
line J of year 2011 should equal line B of year 2012). Do these data reconcile?
If your firm’s data do not reconcile, please explain:
3

Please estimate the percentage of total production of diffusion-annealed, nickel-plated steel in Japan accounted for by your
percent
firm’s production in 2013.
4

Please estimate the percentage of total exports to the United States of diffusion-annealed, nickel-plated steel from Japan
percent
accounted for by your firm’s exports in 2013.
5

Identify principal other export markets.