13-4-3132 Foreign Producer Questionnaire

OMB No. 3117-0016/USITC No. 13-4-3132; Expiration Date: 6/30/2014
(No response is required if currently valid OMB control number is not displayed)

FOREIGN PRODUCERS’/EXPORTERS’ QUESTIONNAIRE
WELDED STAINLESS STEEL PRESSURE PIPE FROM
MALAYSIA, THAILAND, AND VIETNAM

This questionnaire must be received by the Commission by no later than May 30, 2013
See page 4 of the Instruction Booklet for filing instructions.
The information called for in this questionnaire is for use by the United States International Trade
Commission in connection with its antidumping investigations concerning welded stainless steel pressure
pipe from Malaysia, Thailand, and Vietnam (Inv. Nos. 731-TA-1210-1212 (Preliminary)). The
information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title
VII.

Name of firm

_________________________________________________________________

Address
World Wide Web address
Has your firm produced or exported welded stainless steel pressure pipe (as defined in the instruction booklet) at
any time since January 1, 2010?

NO

(Sign the certification below and promptly return only this page of the questionnaire to the Commission)

YES

(Read the instruction booklet carefully, complete all parts of the questionnaire, and return the entire
questionnaire to the Commission so as to be received by the date indicated above)

Data reported in this questionnaire relate to (Check one):
MALAYSIA

THAILAND

VIETNAM

Return questionnaire via the U.S. International Trade Commission Drop Box by clicking
on the following link: https://dropbox.usitc.gov/oinv/. (use the following PIN: WSSPP)
CERTIFICATION
I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge
and belief and understand that the information submitted is subject to audit and verification by the Commission.
By means of this certification I also grant consent for the Commission, and its employees and contract personnel, to use the
information provided in this questionnaire and throughout this proceeding in any other import-injury proceedings conducted by
the Commission on the same or similar merchandise.
I acknowledge that information submitted in this questionnaire response and throughout this proceeding may be used by the
Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or
maintaining the records of this proceeding or related proceedings for which this information is submitted, or in internal audits and
proceedings relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all
contract personnel will sign non-disclosure agreements.

Name of Authorized Official

Title of Authorized Official

Date

Phone:
Signature

Email address
Fax:

Business Proprietary
Foreign Producers’/Exporters’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 2

PART I.—GENERAL INFORMATION
The questions in this questionnaire have been reviewed with market participants to ensure that issues of
concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as
possible. Public reporting burden for this questionnaire is estimated to average 20 hours per response,
including the time for reviewing instructions, searching existing data sources, gathering the data needed,
and completing and reviewing the questionnaire. Send comments regarding the accuracy of this burden
estimate or any other aspect of this collection of information, including suggestions for reducing the
burden, to the Office of Investigations, U.S. International Trade Commission, 500 E Street, SW,
Washington, DC 20436.
I-1a.

I-1b.

I-2.

I-3.

OMB statistics.--Please report below the actual number of hours required and the cost to your
firm of preparing the reply to this questionnaire and completing the form.
hours
dollars
OMB feedback.--We are interested in any comments you may have for improving this
questionnaire in general or the clarity of specific questions. Please attach such comments to your
response or send them to the above address.
Establishments covered.--Provide the name and address of establishment(s) covered by this
questionnaire (see page 3 of the instruction booklet for reporting guidelines). If your firm is
publicly traded, please specify the stock exchange and trading symbol.

U.S. importers.--Please provide the names, street addresses (not P.O. boxes), contacts, telephone
numbers, and e-mail addresses of the FIVE largest U.S. importers of your firm’s welded stainless
steel pressure pipe in 2012.

Importer’s name

1

Contact person

Email

Telephone

Street address (not P.O.
box), city, state, and zip
code

Street Address

,
City

2

State

Street Address

,
City

3

State

,
State

Zip Code

Street Address

,
City

5

Zip Code

Street Address
City

4

Zip Code

State

Zip Code

Street Address

,
City

State

Zip Code

Share of
your
2012
exports
(%)

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 3

PART I.--GENERAL INFORMATION--Continued
I-4.

Related U.S. producers.--Does your firm or any related firm produce, have the capability to
produce, or have any plans to produce welded stainless steel pressure pipe in the United States or
other countries?
No

I-5.

Yes--Please name the firm(s) and country(ies) below and, if U.S. producer(s),
ensure that they complete the Commission’s producer questionnaire
(contact Michael Szustakowski at 202-205-3169 or mgs@usitc.gov for
copies of that questionnaire).

Related U.S. importers.--Does your firm or any related firm import or have any plans to import
welded stainless steel pressure pipe into the United States?
No

Yes--Please name the firm(s) below and ensure that they complete the
Commission’s importer questionnaire (contact Michael Szustakowski at
202-205-3169 or mgs@usitc.gov for copies of that questionnaire).

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 4

PART II.--TRADE AND RELATED INFORMATION
Further information on this part of the questionnaire can be obtained from Michael Szustakowski (202205-3169, mgs@usitc.gov). Supply all data requested on a calendar-year basis.
II-1.

Contact information.-- Please identify the responsible individual and the manner by which
Commission staff may contact that individual regarding the confidential information submitted in
part II.
Name
Title
Email
Telephone
Fax

II-2.

Changes in operations.--Please indicate whether your firm has experienced any of the following
changes in relation to the production of welded stainless steel pressure pipe since January 1,
2010.
(check as many as appropriate)
(please describe)
plant openings ..............................

plant closings................................

relocations ....................................

expansions ....................................

acquisitions...................................

consolidations...............................

prolonged shutdowns or
production curtailments................
revised labor agreements ..............

other (e.g., technology) ................

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 5

PART II.--TRADE AND RELATED INFORMATION--Continued
II-3.
Anticipated changes in operations.--Does your firm anticipate any changes in the character of
your operations or organization (as noted above) relating to the production of welded stainless steel
pressure pipe in the future?
No

II-4a.

Yes–Supply details as to the time, nature, and significance of such changes
and provide underlying assumptions, along with relevant portions of
business plans or other supporting documentation that address this
issue. Include in your response a specific projection of your firm’s
capacity to produce welded stainless steel pressure pipe (in short tons)
for 2013 and 2014.

Same equipment and machinery.--Has your firm since 2010 produced, or does your firm
anticipate producing in the future, other products on the same equipment and machinery used in
the production of welded stainless steel pressure pipe?
No

Yes--List the following.

Product

Period

Basis for allocation of capacity data

Welded stainless steel pressure
pipe

II-4b.

Please report your firm’s combined production capacity and production of these products and
welded stainless steel pressure pipe in the periods indicated.
(Quantity in short tons)
Calendar years
Item

2010

2011

January-March
2012

2012

2013

1

Overall Production Capacity

Production of:
Welded stainless steel pressure
pipe ≤ 14”
Welded stainless steel pressure
pipe > 14”
All other products

2

All products
1

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production
capacity, and explain any changes in reported capacity (use additional pages as necessary).

2

Please identify the other products:

____________________________________

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 6

PART II.--TRADE AND RELATED INFORMATION--Continued
II-5.

Constraints on production.--Please describe the constraint(s) that set the limit(s) on your
production capacity.

II-6.

Production shifting.--Is your firm able to switch production between welded stainless steel
pressure pipe and other products in response to a relative change in the price of welded stainless
steel pressure pipe vis-a-vis the price of other products, using the same equipment and labor?
No

Yes---Please identify the other products, the approximate time and cost
involved in switching, and the minimum relative price change required
for your firm to switch production to or from welded stainless steel
pressure pipe.

II-7.

Share of sales.--What percentage of your firm’s total sales in its most recent fiscal year was
represented by sales of welded stainless steel pressure pipe?
percent

II-8.

Share of total production.--Please estimate what percentage of total production of welded
stainless steel pressure pipe in Malaysia, Thailand, or Vietnam is accounted for by your firm’s
total production of welded stainless steel pressure pipe in 2012.
(a) Your firm accounted for
pressure pipe in Malaysia.

percent of 2012 total production of welded stainless steel

(b) Your firm accounted for
pressure pipe in Thailand.

percent of 2012 total production of welded stainless steel

(c) Your firm accounted for
pressure pipe in Vietnam.

percent of 2012 total production of welded stainless steel

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 7

PART II.--TRADE AND RELATED INFORMATION--Continued
II-9.

Share of total exports.--Please estimate what percentage of total exports to the United States of
welded stainless steel pressure pipe from Malaysia, Thailand, or Vietnam is accounted for by
your firm’s total exports of welded stainless steel pressure pipe in 2012.

.
(a) Your firm accounted for
percent of total 2012 exports of welded stainless steel
pressure pipe from Malaysia to the United States.
(b) Your firm accounted for
percent of total 2012 exports of welded stainless steel
pressure pipe from Thailand to the United States.
(c) Your firm accounted for
percent of total 2012 exports of welded stainless steel
pressure pipe from Vietnam to the United States.
II-10.

Inventories in the United States.--Has your firm, since 2010, maintained any inventories of
welded stainless steel pressure pipe in the United States (not including inventories held by firms
identified in question I-3)?
No

Yes--Report the quantity of such end-of-period inventories below.

(Quantity in short tons)
January-March
Item

2010

2011

2012

2012

2013

Inventory

II-11.

Third country trade actions.--Is the welded stainless steel pressure pipe exported by your firm
subject to antidumping/countervailing duty/safeguard findings, remedies, or proceedings?
No

Yes--List the products(s), countries affected, and the date of such
findings/remedies/proceedings.
Product

Country

Date

Business Proprietary
Foreign Producers’ Questionnaire – Welded Stainless Steel Pressure Pipe

Page 8

PART II.--TRADE AND RELATED INFORMATION--Continued
II-10.

Report your firm’s production capacity, production, shipments, and inventories related to the
production of welded stainless steel pressure pipe in your establishment(s) in Malaysia, Thailand,
or Vietnam during the specified periods. (See definitions in the instruction booklet.) Do not
submit data on multiple countries combined, the establishments reported here should all be
located in the country of the firm’s address reported on the certification page. Multinational
companies with production in multiple subject countries should submit separate foreign producer
questionnaire responses for each subject country.
Quantity (in short tons)
Actual experience
January-March
Item

2010

2011

2012

2012

2013

Projections
2013

1

2014

2

Average production capacity (A)
3

Beginning-of-period inventories (B)
Production (C)
Home market shipments:
Internal consumption/transfers (D)
Commercial shipments (E)
Exports to the United States (F)
4

Exports to all other markets (G)
Total exports (H)
(should equal F+G)
Total shipments (I)
(should equal D+E+F+G)
End-of-period inventories (J)
1

Please explain the basis for your projections.

2

The production capacity (see definitions in instruction booklet) reported is based on operating
hours per week,
weeks per year. Please describe the methodology used to calculate production capacity, and explain any changes in reported
capacity.

3

Reconciliation of data.—The data should reconcile as follows: B + C - I = J. Do these data reconcile?

Yes

No

Also, end-of-period inventories should equal the beginning-of-period inventories reported in the subsequent calendar year (i.e.,
line J of year 2010 should equal line B of year 2011). Do these data reconcile?
Yes
No
If your data do not reconcile, please explain:
4

Identify principal other export markets.