Preliminary Investigations - April

INSTRUCTION BOOKLET

GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION FOREIGN
PRODUCER/EXPORTER QUESTIONNAIRES

Galvanized Steel Wire from China and Mexico
Investigation Nos. 701-TA-479 and 731-TA-1183-1184 (Preliminary)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to this proceeding, you may contact
the following member of the Commission=s staff (Fax 202-205-3205):
Angela Newell, investigator (202-708-5409; E-mail Angela.Newell@usitc.gov)

GENERAL INFORMATION
Background.--This proceeding was instituted in response to a petition filed on March 31, 2011, by
Davis Wire Corp., Irwindale, CA; Johnstown Wire Technologies, Inc., Johnstown, PA; Mid-South
Wire Co., Inc., Nashville, TN; National Standard, LLC, Niles, MI; and Oklahoma Steel and Wire
Co., Inc., Madill, OK. Countervailing and/or antidumping duties may be assessed on the subject
imports as a result of this proceeding if the Commission makes an affirmative determination of
injury, threat, or material retardation, and if the U.S. Department of Commerce makes an
affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2011/galvanized_steel_
wire/prelimphase.htm. Address all correspondence to the United States International Trade
Commission, Washington, DC 20436. Hearing-impaired individuals can obtain information
regarding this proceeding via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than April 14, 2011. Although the enclosed postpaid
envelope may be used to return the completed questionnaire, use of an overnight mail service may
be necessary to ensure that your response actually reaches the Commission by April 14, 2011. If
you do not use the enclosed envelope, please make sure the completed questionnaire is sent to the
attention of Angela Newell. Return only one copy of the completed questionnaire(s), but
please keep a copy for your records so that you can refer to it if the Commission staff
contacts you with any questions during the course of the proceeding.
Service of questionnaire response(s).--In the event that your firm is a party to this proceeding,
you are required to serve a copy of the questionnaire(s), once completed, on parties to the
proceeding that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such
parties is maintained by the Commission=s Secretary and may be obtained by calling
202-205-1803. A certificate of service must accompany the copy of the completed questionnaire(s)
you submit (see 19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.

2

GENERAL INFORMATION--Continued
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with the proceeding, may become subject to, and released under,
the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with this proceeding or other import-injury proceedings
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals.

INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with this proceeding (i.e., a producer, importer, purchaser, and/or
foreign producer questionnaire), you need not respond to duplicated questions in the
questionnaires.
Consolidate all establishments in China and Mexico.--Report the requested data for your
establishment(s) located in China and Mexico. Firms operating more than one establishment
should combine the data for all establishments into a single report.
Filing instructions.—Questionnaires may be filed either electronically or in paper form.

3

INSTRUCTIONS--Continued
OPTIONS FOR FILING
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2011/galv
anized_steel_wire/prelimphase.htm. Please do not attempt to modify the format
or permissions of the questionnaire document. You may complete the
questionnaire and submit it, electronically, or you may print it out and submit it in
paper form, as described below:
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address above. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• Upload via Secure Drop Box.—Upload the completed questionnaire in MS Word format along
with a scanned copy of the signed certification page (page 1) through the Commission’s secure
upload facility:
Web address: https://dropbox.usitc.gov/oinv/

Pin: GLVWRE

• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, INV. NO. 1183. Please note that submitting your
questionnaire by e-mail may subject your firm’s business proprietary information to transmission
over an unsecure environment and to possible disclosure. If you choose this option, the
Commission warns you that any risk involving possible disclosure of such information is assumed
by the submitter and not by the Commission.
• Fax.—Fax to 202.205.3205.
• Overnight mail service.—Mail to the following address: United States International Trade
Commission; Office of Investigations, Room 615; 500 E Street SW; Washington, DC 20024.
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
Note: If you are a party to the proceeding, and service of the questionnaire is required, such
service should be made in paper form.

4

DEFINITIONS
Galvanized steel wire.—A cold-formed carbon-quality steel product in coils, of solid, circular
cross section with a diameter of 0.5842 mm (0.0230 inch) or more, usually formed by drawing
wire rod or wire through a die, and coated with zinc (whether by hot-dipping or electroplating).
The subject steel product is one in which: (1) iron predominates, by weight, over each of the other
contained elements; (2) the carbon content is two percent or less, by weight; and (3) none of
the elements listed below exceeds the quantity, by weight, respectively indicated:
•
1.80 percent of manganese, or
•
1.50 percent of silicon, or
•
1.00 percent of copper, or
•
0.50 percent of aluminum, or
•
1.25 percent of chromium, or
•
0.30 percent of cobalt, or
•
0.40 percent of lead, or
•
1.25 percent of nickel, or
•
0.30 percent of tungsten, or
•
0.02 percent of boron, or
•
0.10 percent of molybdenum, or
•
0.10 percent of niobium, or
•
0.41 percent of titanium, or
•
0.15 percent of vanadium, or
•
0.15 percent of zirconium.
Galvanized steel wire is currently classified in subheadings 7217.20.30 and 7217.20.45 of
the HTSUS which cover galvanized wire of all diameters and all carbon content. Galvanized wire
is reported under statistical reporting numbers 7217.20.3000, 7217.20.4510, 7217.20.4520,
7217.20.4530, 7217.20.4540, 7217.20.4550, 7217.20.4560, 7217.20.4570, and 7217.20.4580.
Although the HTSUS subheadings are provided for convenience and Customs purposes,
the written description of the merchandise is dispositive.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.

5

DEFINITIONS--Continued
Establishment.--Each facility of a firm in China and Mexico involved in the production of
galvanized steel wire (as defined above), including auxiliary facilities operated in conjunction
with (whether or not physically separate from) such facilities.
United States.--For purposes of this proceeding, the 50 States, Puerto Rico, the U.S. Virgin Islands,
and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing galvanized steel wire (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Production.--All production in your establishment(s) in China and Mexico, including production
consumed internally within your firm.
Shipments.--Shipments of products produced in your establishment(s) in China and Mexico.
Quantities reported should be net of returns.
Home market commercial shipments.--Shipments, other than internal consumption and
transfers to related firms, within China and Mexico.
Home market internal consumption/transfers to related firms.--Shipments made to
related firms in China and Mexico, including product consumed internally by your firm.
Export shipments.--Shipments to destinations outside China and Mexico, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.

6