Drill Pipe and drill Collars from China (F)

INSTRUCTION BOOKLET
GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION QUESTIONNAIRES

Drill Pipe / Drill Collars from China
Investigation Nos. 701-TA-474 and 731-TA-1176 (Final)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to this proceeding, you may contact
the following members of the Commission=s staff (Fax 202-205-3205):
Nathanael Comly, investigator (202-205-3174; E-mail nathanael.comly@usitc.gov)
regarding general questions and trade and related information;
David Boyland, auditor (202-708-4725; E-mail david.boyland@usitc.gov)
regarding financial information; and
Amelia Preece, economist (202-205-3250; E-mail amelia.preece@usitc.gov)
regarding pricing, market, and related information.

GENERAL INFORMATION
Background.—This proceeding was instituted in response to a petition filed effective December
31, 2009, by VAM Drilling USA Inc., Houston, TX; Rotary Drilling Tools, Beasley, TX; Texas
Steel Conversions, Inc., Houston, TX; TMK IPSCO, Downers Grove, IL; and the United Steel,
Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers
International Union, AFL-CIO-CLC, Pittsburgh, PA. Countervailing and/or antidumping duties
may be assessed on the subject imports as a result of this proceeding if the Commission makes an
affirmative determination of injury, threat, or material retardation, and if the U.S. Department of
Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to this proceeding are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2010/drill_pipe_from_c
hina/finalphase.htm. Address all correspondence to the United States International Trade
Commission, Washington, DC 20436. Hearing-impaired individuals can obtain information
regarding this proceeding via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than October 15, 2010. Please make sure the
completed questionnaire is sent to the attention of Nathanael Comly. Return only one copy of
the completed questionnaire(s), but please keep a copy for your records so that you can refer
to it if the Commission staff contacts you with any questions during the course of this
proceeding.
Service of questionnaire response(s).--In the event that your firm is a party to this proceeding,
you are required to serve a copy of the questionnaire(s), once completed, on parties to the
proceeding that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such
parties is maintained by the Commission=s Secretary and may be obtained by calling
202-205-1803. A certificate of service must accompany the copy of the completed questionnaire(s)
you submit (see 19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).

2

GENERAL INFORMATION--Continued
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with this proceeding, may become subject to, and released under,
the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with this proceeding or other import-injury investigations
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals.
INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with this proceeding (i.e., a producer, importer, and/or purchaser
questionnaire), you need not respond to duplicated questions in the questionnaires.
Consolidate all U.S. establishments.--Report the requested data for your establishment(s) located
in the United States. Firms operating more than one establishment should combine the data
for all establishments into a single report.
Filing instructions.— This questionnaire is available as a “fillable” form in MS Word
format on the Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2010/drill_pipe_
from_china/finalphase.htm Please do not attempt to modify the format or permissions
of the questionnaire document. Questionnaires may be filed electronically or in paper
form, as described on the following page.

3

INSTRUCTIONS--Continued
OPTIONS FOR FILING
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address below. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, INV. NOS. 701-TA-474 and 731-TA-1176. Please
note that submitting your questionnaire by e-mail may subject your firm’s business proprietary
information to transmission over an unsecure environment and to possible disclosure. If you
choose this option, the Commission warns you that any risk involving possible disclosure of such
information is assumed by the submitter and not by the Commission.
• Fax.—Fax to 202.205.3205.
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615
500 E Street SW
Washington, DC 20024
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.

Note: If you are a party to these investigations, and service of the questionnaire is required,
such service should be made in paper form.

4

DEFINITIONS
Drill pipe and drill collars.-- The products covered by this proceeding are steel drill pipe, and steel
drill collars, whether or not conforming to American Petroleum Institute (API) or non–API
specifications, whether finished or unfinished (including green tubes suitable for drill pipe),
without regard to the specific chemistry of the steel (i.e., carbon, stainless steel, or other alloy
steel), and without regard to length or outer diameter. The scope does not include tool joints not
attached to the drill pipe, nor does it include unfinished tubes for casing or tubing covered by any
other antidumping or countervailing duty order. The subject products are currently imported
under the following Harmonized Tariff Schedule of the United States (HTSUS) statistical
reporting numbers: 7304.22.0030, 7304.22.0045, 7304.22.0060, 7304.23.3000, 7304.23.6030,
7304.23.6045, 7304.23.6060, 8431.43.8040 and may also enter under 8431.43.8060,
8431.43.4000, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044,
7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.49.0015, 7304.49.0060, 7304.59.8020,
7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, and
7304.59.8055. Prior to February 2, 2007, these imports were reported under different statistical
provisions, including 7304.21.3000, 7304.21.6030, 7304.21.6045, and 7304.21.6060. While
HTSUS subheadings are provided for convenience and Customs purposes, the written description
of the scope of this proceeding is dispositive.
Unfinished drill pipe: Tube bodies produced as an integral component for finished drill
pipe (see below). Unfinished drill pipe may be "green" (drill pipe tube that has not been
heat-treated or processed) or it may be upset and heat-treated to meet or exceed API 5D
grades. For the purposes of these questionnaires, the term “drill pipe” includes both
standard-weight and heavy-weight drill pipe.
Finished drill pipe: Heavy seamless tubing used to rotate the bit and circulate the drilling
fluid; joints of finished drill pipe are coupled together by means of tool joints. For the
purposes of these questionnaires, the term “drill pipe” includes both standard-weight and
heavy-weight drill pipe.
Unfinished drill collars: Tubes produced (e.g., hot-pierced or cold-bored) as an integral
component for finished drill collars (see below). Unfinished drill collars do not include bar
stock.
Finished drill collars: Heavy, thick-walled tubing used between the drill pipe and the bit
in the drill stem to provide a pendulum effect to the drill stem and weight to the bit.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
DEFINITIONS—Continued
5

was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.
Establishment.--Each facility of a firm involved in the production, importation, and/or purchase
of drill pipe and/or drill collars (as defined above), including auxiliary facilities operated in
conjunction with (whether or not physically separate from) such facilities.
United States.--For purposes of this proceeding, the 50 States, Puerto Rico, the U.S. Virgin Islands,
and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing drill pipe and/or drill collars (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
Imports.--Those products identified for Customs purposes as imports for consumption for which
your firm was the importer of record (i.e., was responsible for paying any import duty) or
consignee (i.e., to which the merchandise was first delivered).
Import quantities.--Quantities reported should be net of returns.
Import values.--Values reported should be landed, duty-paid values at the U.S. port of
entry, including ocean freight and insurance costs, brokerage charges, and import duties
(i.e., all charges except inland freight in the United States).
Purchaser.--Any person or firm engaged, either directly or through a parent company or
subsidiary, in purchasing drill pipe and/or drill collars (as defined above) from another firm that
produces, imports, or otherwise distributes drill pipe and/or drill collars.
Purchases.--Purchases from all sources, NOT including direct imports from foreign producers
(which should be reported in an importer questionnaire).
Purchase quantities.--Quantities reported should be net of returns.
Purchase values.--Values reported should be net values (i.e., gross purchase values less all
discounts, allowances, rebates, and the value of returned goods), delivered to your U.S.
receiving point.
Shipments.--Shipments of products produced in or imported by your establishment(s). Include
shipments to the contracting firm of product produced by your firm under a toll agreement.
Shipment quantities.--Quantities reported should be net of returns.

6

DEFINITIONS—Continued
Shipment values.--Values reported should be net values (i.e., gross sales values less all
discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b.
your U.S. point of shipment. The value of domestic shipments to the contracting firm
under a toll agreement is the conversion fee (including profit).
Types of shipments:
U.S. shipments.--Commercial shipments, internal consumption, and transfers to related
firms within the United States.
Commercial shipments.--Shipments, other than internal consumption and transfers
to related firms, within the United States.
Internal consumption.--Product consumed internally by your firm.
Transfers to related firms.--Shipments made to related domestic firms.
Export shipments.--Shipments to destinations outside the United States, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Toll agreement.--Agreement between two firms whereby the first firm furnishes the raw materials
and the second firm uses the raw materials to produce a product that it then returns to the first firm
with a charge for processing costs, overhead, etc.
Production.--All production in your establishment(s), including production consumed internally
within your firm and production for another firm under a toll agreement.
PRWs.--Production and related workers, including working supervisors and all nonsupervisory
workers (including group leaders and trainees) engaged in fabricating, processing, assembling,
inspecting, receiving, storage, handling, packing, warehousing, shipping, trucking, hauling,
maintenance, repair, janitorial and guard services, product development, auxiliary production for
plant=s own use (e.g., power plant), recordkeeping, and other services closely associated with the
above production operations.

7

DEFINITIONS--Continued
Average number employed.--Add the number of employees, both full-time and part-time, for the
12 pay periods ending closest to the 15th of the month and divide that total by 12. For the
January-June periods, calculate similarly and divide by 6.
Hours worked.--Include time paid for sick leave, holidays, and vacation time. Include overtime
hours actually worked; do not convert overtime pay to its equivalent in straight-time hours.
Wages paid.--Total wages paid before deductions of any kind (e.g., withholding taxes, old-age and
unemployment insurance, group insurance, union dues, bonds, etc.). Include wages paid directly
by your firm for overtime, holidays, vacations, and sick leave.
Fiscal year.--The 12-month period between settlement of your firm=s financial accounts.

8