Roundwood Received for Processing - North

---

Overview

Instructions
Page 1
Page 2-3
Page 4

---

Sheet 1: Instructions

Instructions for "ROUNDWOOD RECEIVED FOR PROCESSING"
This instruction sheet is provided to help you fill out the "ROUNDWOOD RECEIVED FOR PROCESSING"
survey form. This form has been designed to determine the location, size, and composition of the primary
wood-using mills in your state, the volume of roundwood harvested by product, species, and geographic
location, and the volume and disposition of wood residues generated during primary processing for the
calendar year indicated. Your cooperation completing this form for you mill will make the results of this
survey comprehensive, accurate, and timely. All information is held in confidentiality and used only for
statistical reports. No individual mill production data will be released. Your cooperation is appreciated.
Page 1 -- Mill Information
* Fill in the company name and mailing address. Also record the name and phone number of the owner, manager,
	or person that can be contacted if there are any questions concerning the information on the survey form.
* Record the name of the County in which the mill is located and the city or town the mill is nearest to.
	Note: If Latitude and Longitude of mill location are available, they may be entered instead of city or town.
* Indicate the amount of wood the mill is capable of processing in a year when operating at full capacity.
	Please indicate unit of measure if other than thousand board feet per year.
* Under "Total volume of product produced:" ,indicate the amount of wood the mill actually processed during the
	calendar year. This number should equal the sum of volumes entered on pages 2 and 3.
* Check the box under "Mill Type" that best describes the mill. If none of the types listed suit the mill, write
	in the type of mill after "99-Other: (Specify) __________".
* Check the box under "Type of Roundwood Processed" that indicates the type of roundwood received at the mill
	for processing. If the mill processes more than one type of roundwood, complete a separate form for each.
* Under "Primary Product Produced", check the main product produced at the mill.
* Check whether the mill operated full-time or part-time, and the mill status for the calendar year indicated.
Pages 2 and 3 -- SECTION I. ORIGINS AND SPECIES OF ROUNDWOOD PROCESSED
* In the column heading "State or foreign country", record the name or the State or country from which roundwood
	was received (abbreviate as needed). In "County name " column, enter the name of the county or province
	from which roundwood was received (abbreviate as needed). For each species, enter the volume that came
	from each State/Country and County/Province. If the species is not listed, enter it into the last three columns
	labeled "Other:" (a species list is at the bottom of page 3). An example is shown on the first line. If you need
	more space, please duplicate this form.
* At the bottom of page 2 under "UNIT OF MEASURE…", check the scaling unit for the roundwood volumes
	reported under the species columns of the form. If the scaling unit is not listed, use the code
	"17-Other (Specify)_________" and write in the unit of measure the volume is reported in. If a weight scale is
	used, please indicate the weight per thousand board feet or cords in the instruction section on page 3.
Pages 4 -- SECTION II. DISPOSAL OF BARK AND WOOD RESIDUES GENERATED
* Indicate how the wood and bark residues generated at the mill are disposed of by placing percentages in the
	boxes under the appropriate wood-residue type columns. Only produce disposition information for the types
	of residue generated at the mill. Columns should sum to 100%.
* Indicate if a debarker is operated.
* Indicate if any logs are resold outside the United States. A separate form should be filled out with Mill Type
	of "24 - Export logs" check on page 1. Only record the volume logs exported out of the country on the Export
	logs form. SECTION II. DISPOSAL OF BARK AND WOOD RESIDUES GENERATED does not need to be
	completed for any logs that are shipped out of the Country.

---

Sheet 2: Page 1

FOREST SERVICE, U.S. DEPARTMENT OF AGRICULTURE

Form Approved

Northern Research Station

OMB No. 0596-0010

1992 Folwell Avenue

Expires:

St. Paul, Minnesota 55108

ROUNDWOOD RECEIVED FOR PROCESSING

state

year

Company Name:

Mailing Address:

City/State/Zip code

(City)

(ST)

(Zip)

Person to contact regarding this report, their title, and telephone number.

County mill is located in: _________________________

Latitude of mill: ______________________

Name of city or town mills is located nearest to: ______________________ or

Longitude of mill: _____________________

Annual mill capacity (volume per year when operating at full capacity): __________

Number of Employees: __________

Please complete this form and return it promptly. If complete records are not available, please give your best estimates.

DO NOT INCLUDE LOGS OR BOLTS SOLD OR TRANSFERRED TO ANOTHER PRIMARY PROCESSING PLANT.

ALL VOLUMES REPORTED WILL BE HELD CONFIDENTIAL AND WILL ONLY BE USED TO AGGREGATE TO THE

COUNTY AND STATE LEVEL. Other information may be used to compile "Regional/Statewide Industry" directories.

Please check the box to be omitted from "Regional/Statewide Industry" directories.

For Official Use Only.

Mill #:__1_____ State:_38__ County:_____ Product:______ Total volume:_____________

XXXX XX XXX XX XXXXXXX

Mill Type

Type of Roundwood Processed

Primary Product Produced

Check only one

(Check only one kind of product. If more than one

(Check only one Major product produced

XX

kind was processed, fill out a separate form for each)

from the roundwood received at the mill)

11-Band sawmill

XX

XX

12-Circular sawmill

01-Saw logs and bolts

11-Lumber

13-Chip-n-saw

02-Veneer logs and bolts

12-Ties

14-Gang sawmill

04-Cabin logs

13-Pallet lumber

15-Scragg sawmill

05-Charcoal wood

14-Lath

16-Portable band saw

06-Cooperage logs and bolts

21-Veneer-sheathing

21-Commercial veneer mill

07-Excelsior/shaving bolts

22-Veneer-matches

22-Container/packaging

08-Handle bolts

23-Veneer-plywood

veneer mill

09-Industrial fuelwood

24-Veneer-sticks

23-Face veneer mill

10-Mine timbers

25-Veneer-boxes

24-Export logs

11-Other (Specify): ___________________

51-Handles/blanks

50-Handle mill

12-Pilings

61-Barrels/stocks

61-Tight cooperage

13-Poles

62-Container/stocks

62-Slack cooperage

14-Posts

71-Posts - fencing

71-Untreated post, pole,

Operating time:

Mill status:

72-Posts - Other:__________

or piling mill

X

X

73-Poles - utility

72-Treated post, pole,

1-Full time

1-New

74-Poles - Other:__________

or piling mill

2-Part time

2-Existing

75-Pilings

81-Cabin log mill

3-Closed

81-Cabin logs

82-Charcoal kiln

4-Reopened

82-Charcoal briquettes/lumps

83-Excelsior/shavings mill

5-Inactive

83-Excelsior/bedding

84-Mine timbers

6-Sold

84-Packing material

85-Shingles mill

Check here if "NO" wood was processed during

85-Shingles/shakes

99-Other:

calendar year and return form.

86-Mine supports

(Specify) ______________

Check here if you wish to receive a copy of

94-Industrial fuelwood

the report resulting from this study.

99-Other: (Specify) ___________

Public reporting burden for this collection of information is estimated to average 50 minutes per response, including the time for reviewing

instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of

information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions

for reducing this burden, to Department of Agriculture, Clearance Officer, OIRM, Room 404-W. Washington, DC 20250; and to the

Office of Management and Budget, Paperwork Reduction Project (OMB# 0596-0010), Washington, DC 20503.

---

Sheet 3: Page 2-3

SECTION I. ORIGINS AND SPECIES OF ROUNDWOOD PROCESSED

Report the origins, species, and volume of roundwood processed during the calendar year. Do not include the volume of roundwood

sold or transferred to other companies. At the bottom of the page, check the Unit of Measure used to scale roundwood at your mill.

For Official Use Only.

If green tons or dry tons are checked, please specify pounds per thousand board feet _________ or pounds per cord __________.

Mill #:__2_____ State:_____ County:_____ Product:______ Prodout:_____

XXX XX XXX XX XX

In the columns labeled "Origins of Roundwood", identify the State and Counties, or Countries from which roundwood was received.

Then, identify the species harvested from each location by entering the harvest volume under each appropriate species. If a

Note: Check the box next to the unit of measure at the bottom of this page for the volumes reported.

species is not listed, print the species name in the empty columns labeled "Other Sp.". A species list is provided at the bottom

of the page, but please include any species that are processed at your plant that are not included in the list.

Origin of Roundwood

Volume of species harvested from each location.

Volume of species harvested from each location.

(Please list)

State

Code

Larch/

Aspen/

White

Others

Others

or

Balsam

Hem-

Tama-

Jack

Red

White

Other

balsam

Bass-

Yellow

(Paper)

Black

Hard

Soft

Red

White

foreign

Code

Cedar

fir

lock

rack

pine

pine

pine

pines

Spruce

Ash

poplar

wood

Beech

birch

birch

cherry

Elm

Hickory

maple

maple

oaks

oaks

county

XX

County

XXX

60

12

260

70

105

125

129

100

90

540

747

950

531

371

375

762

970

400

320

310

814

815

IN(ex.)

Clay(ex.)

35

46

27

10

46

52

Species List

Unit of Measure (Check one): BF = board feet and MBF = 1,000 board feet

220 - Cypress

370 - Other birch

731 - Sycamore

1-Doyle MBF

5-Green tons

202 - Douglas fir

740 - Cottonwood

999 - Other hardwoods not listed

10-Doyle BF

6-Dry tons

8-M(1,000) Linear feet

110 - Loblolly-shortleaf pines

602 - Black walnut

2-Scribner MBF

7-M(1,000) pieces

14-Linear feet

108 - Lodgepole pine

611 - Sweetgum

Other: ______________

11-Scribner BF

13-Pieces

9-M(1,000) Cubic feet

121 - Longleaf-slash pines

621 - Yellow-poplar

3-International MBF

4-Standard cord (4'X4'X8')

15-Cubic feet

122 - Ponderosa-Jeffrey pines

690 - Tupelo/black gum

Other: ______________

12-International BF

16-Lake States cord (4'X4'X100")

99-Other (specify)__________________

3-Lumber tally MBF

12-Lumber tally-bf

Page 2

Page 3

---

Sheet 4: Page 4

SECTION II. DISPOSAL OF BARK AND WOOD RESIDUES GENERATED
For Official Use Only.
Mill #:__3_____ State:_____ County:_____ Product:______
XXXX XX XXX XX
Instructions:	For each type of wood residue generated at your mill, enter the percentage that was disposed of by
	the various means. Each column should sum to 100% for each species group recorded.
				BARK		COARSE		FINE
						RESIDUES		RESIDUES
						(Suitable for chipping		(Sawdust, veneer
						such as slabs,		clippings, etc. not
						edgings, etc.)		suitable for chipping)
				Conifer	Hardwood	Conifer	Hardwood	Conifer	Hardwood
DISPOSITION OF RESIDUES				11	12	21	22	31	32
				XXX	XXX	XXX	XXX	XXX	XXX
1. USED FOR:			X
a. Manufacture of fiber products and or composite
	products such as pulp, hardboard,
	particleboard, or OSB		1
b. Charcoal or chemical wood.			2
c. Industrial fuel at this plant.			3
d. Industrial fuel at other plants.			4
e. Domestic household fuel --
	sold or given away		5
f. Other Bio-energy products such as
	Pellets, biodiesel, ethanol		8
g. Mulch			9
h. Miscellaneous uses such as livestock
	bedding, small dimension,
	and specialty items		6
2. NOT USED (including land fill and
	bark burned as waste)		7
3. TOTAL				100%	100%	100%	100%	100%	100%
Do you own or operate a debarker?			Yes		No
Do you resell any logs OUTSIDE the U.S.?			Yes		No
	(If you resell logs that are sold to other Countries, a separate form should be completed. Record the volume,
	species, and State and county of origin for the volume that was exported. DO NOT include the export volume
	on the form for roundwood that was processed at your mill. 'Section III. Disposal of Bark and
	Wood Residues Generated' does not need to be completed for logs exported outside the U.S.)
Page 4