Pipeline published an NPRM on March
12, 2008, entitled, "Pipeline Safety: Safety Standards for
Increasing the Maximum Allowable Operating Pressure for Natural Gas
Transmission Pipelines." It appears that an Information Collection
was not submitted to OMB at that time. In this NPRM, Pipeline
proposes to amend the pipeline safety regulations to prescribe
safety requirements for the operation of certain gas transmission
pipelines at pressures based on higher operating stress levels. The
result is an increase of maximum allowable operating pressure
(MAOP) over that currently allowed in the regulations. This action
updates regulatory standards to reflect improvements in pipeline
materials, assessment tools, and maintenance practices, which
together have significantly reduced the risk of failure in steel
pipeline fabricated and installed over the last twenty-five years.
The rule allows use of an established industry standard for the
calculation of MAOP, but limits application of the standard to
pipelines posing a low safety risk based on location, materials,
and construction. This rule will generate significant public
benefits by boosting the potential capacity and efficiency of
pipeline infrastructure, while promoting investment in improved
pipe technology and rigorous life-cycle maintenance. Incorporating
the special permit standards into PHMSAs regulations allows
qualified pipelines to operate at higher pressure. The rule eases
regulatory burdens, encourages the development of new
infrastructure, improves regulatory certainty, and reduces Agency
workload associated with granting individual applications. The
information collection associated with this new regulation will
promote the US DOTs Safety and Environmental Strategic Goals.
Notification requirements ensure operators will assess pipeline new
installations and upgrades to better protect both human and
environmental resources. Pipeline operators will contact PHMSA
before implementing an alternative MAOP. Senior executive officers
must sign the certification and send it to PHMSA at least 30 days
before implementation. PHMSA will review the certification request
to ensure that the new or uprated (replacement) pipelines are
specified to accommodate the higher operating pressure.
Recordkeeping and reporting requirements are developed from
pipeline industry standards and internal procedures previously used
by pipeline operators to monitor, evaluate, control, and record
functions relating to the operation and maintenance of their
pipeline system. Without the information collection, PHMSA would
not be guaranteed timely notification of alternative MAOP pipeline
installation and would lack a method to proactively identify trends
and avoid potential safety issues.
US Code:
49 USC 60102 et seq Name of Law: Pipeline Inspection Protection
Enforcement and Safety (Pipes) Act of 2006
US Code: 49 USC 60102 et seq Name of Law:
Pipeline Safety Acts
Pipeline operators will contact
PHMSA before implementing an alternative maximum allowable
operating pressure (MAOP). Senior executive officers must sign the
certification and send it to PHMSA at least 30 days before
implementation. PHMSA will review the certification request to
ensure that the new or uprated (replacement) pipelines are
specified to accommodate the higher operating pressure.
Recordkeeping and reporting requirements are developed from
pipeline industry standards and internal procedures previously used
by pipeline operators to monitor, evaluate, control, and record
functions relating to the operation and maintenance of their
pipeline system. Without the information collection, PHMSA would
not be guaranteed timely notification of alternative MAOP pipeline
installation and would lack a method to proactively identify trends
and avoid potential safety issues.
$0
No
No
Uncollected
Uncollected
Uncollected
Uncollected
T. Foster 202 366-8553
rules@rspa.dot.gov
No
On behalf of this Federal agency, I certify that
the collection of information encompassed by this request complies
with 5 CFR 1320.9 and the related provisions of 5 CFR
1320.8(b)(3).
The following is a summary of the topics, regarding
the proposed collection of information, that the certification
covers:
(i) Why the information is being collected;
(ii) Use of information;
(iii) Burden estimate;
(iv) Nature of response (voluntary, required for a
benefit, or mandatory);
(v) Nature and extent of confidentiality; and
(vi) Need to display currently valid OMB control
number;
If you are unable to certify compliance with any of
these provisions, identify the item by leaving the box unchecked
and explain the reason in the Supporting Statement.