Drill pipe from China (preliminary)

INSTRUCTION BOOKLET

GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION FOREIGN
PRODUCER/EXPORTER QUESTIONNAIRES

Drill Pipe / Drill Collars from China
Investigation Nos. 701-TA-474 and 731-TA-1176 (Preliminary)

Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to these investigations, you may contact
the following member of the Commission=s staff (Fax 202-205-3205):
Angela Newell, investigator (202-708-5409; E-mail angela.newell@usitc.gov)

GENERAL INFORMATION
Background.-- These investigations were instituted in response to a petition filed effective
December 31, 2009 by VAM Drilling USA Inc., Houston, TX; Rotary Drilling Tools, Beasley, TX;
Texas Steel Conversions, Inc., Houston, TX; TMK IPSCO, Downers Grove, IL; and the United
Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers
International Union, AFL-CIO-CLC, Pittsburgh, PA. Countervailing and/or antidumping duties
may be assessed on the subject imports as a result of these investigations if the Commission makes
an affirmative determination of injury, threat, or material retardation, and if the U.S. Department
of Commerce makes an affirmative determination of subsidization and/or dumping.
Questionnaires and other information pertinent to these investigations are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2010/drill_pipe_from_c
hina/prelimphase.htm. Address all correspondence to the United States International Trade
Commission, Washington, DC 20436. Hearing-impaired individuals can obtain information
regarding this investigation via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than January 14, 2010. Please make sure the
completed questionnaire is sent to the attention of Angela Newell. Return only one copy of the
completed questionnaire(s), but please keep a copy for your records so that you can refer to
it if the Commission staff contacts you with any questions during the course of the
investigation.
Service of questionnaire response(s).--In the event that your firm is a party to these investigations,
you are required to serve a copy of the questionnaire(s), once completed, on parties to the
proceeding that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such
parties is maintained by the Commission=s Secretary and may be obtained by calling
202-205-1803. A certificate of service must accompany the copy of the completed questionnaire(s)
you submit (see 19 CFR ' 207.7).
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.

2

GENERAL INFORMATION--Continued
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with these investigations, may become subject to, and released
under, the administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f)
and section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This
means that certain lawyers and other authorized individuals may temporarily be given access to
the information for use in connection with this investigation or other import-injury investigations
conducted by the Commission on the same or similar merchandise; those individuals would be
subject to severe penalties if the information were divulged to unauthorized individuals.

INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with this investigation (i.e., a producer, importer, purchaser, and/or
foreign producer questionnaire), you need not respond to duplicated questions in the
questionnaires.
Consolidate all establishments in China.--Report the requested data for your establishment(s)
located in China. Firms operating more than one establishment should combine the data for
all establishments into a single report.
Filing instructions.—Questionnaires may be filed either in paper form or electronically.

3

INSTRUCTIONS--Continued
OPTIONS FOR FILING IN PAPER FORM
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615
500 E Street, SW
Washington, DC 20024
• Fax.—Fax to 202.205.3205.
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
OPTIONS FOR FILING ELECTRONICALLY
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2010/drill
_pipe_from_china/prelimphase.htm. Please do not attempt to modify the
format or permissions of the questionnaire document. You may complete the
questionnaire electronically, print it out, and submit it in paper form as described
above, or you may submit it electronically through one of the following means:
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address above. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, INV. NO. 1176. Please note that submitting your
questionnaire by e-mail may subject your firm’s business proprietary information to transmission
over an unsecure environment and to possible disclosure. If you choose this option, the
Commission warns you that any risk involving possible disclosure of such information is assumed
by the submitter and not by the Commission.
Note: If you are a party to these investigations, and service of the questionnaire is required, such
service should be made in paper form.

4

DEFINITIONS
Product.-- Drill pipe (including standard weight and heavy weight drill pipe) and drill collars, of
iron (other than cast iron) or steel, whether or not conforming to American Petroleum Institute
(API) or non-API specifications, whether finished (including with tool joints attached) or
unfinished (including green tubes), and without regard to the specific chemistry of the steel (i.e.,
carbon, alloy, or stainless steel). The scope does not include tool joints not attached to drill pipe.
The subject products are normally classified in the following HTS categories: 7304.22.0030,
7304.22.0045, 7304.22.0060, 7304.23.3000, 7304.23.6030, 7304.23.6045, 7304.23.6060 and also
enters under 8431.43.80.40 and may enter under 8431.43.60. These HTS classifications became
effective on February 3, 2007. Prior to February 2, 2007, these imports entered under
7304.21.3000, 7304.21.6030, 7304.21.6045, 7304.21.6060 and also entered under 8431.43.8040
and may have entered under 8431.43.8060.
Drill Pipe: A length of tube, usually steel, to which (when finished) special threaded
connections called tool joints are attached.
Standard Weight Drill Pipe: conventional drill pipe, most commonly certified to API 5D.
Heavy Weight Drill Pipe: A type of drill pipe whose walls are thicker and collars are
longer than conventional drill pipe.
Drill Collars: Thick-walled pipe to provide stiffness and concentration of weight at the
bit.

Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.
Establishment.--Each facility of a firm in China involved in the production of drill pipe and/or
drill collars (as defined above), including auxiliary facilities operated in conjunction with (whether
or not physically separate from) such facilities.
United States.--For purposes of these investigations, the 50 States, Puerto Rico, the U.S. Virgin
Islands, and the District of Columbia.
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing drill pipe and/or drill collars (as defined above) into the United States from a foreign
manufacturer or through its selling agent.
5

Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Production.--All production in your establishment(s) of drill pipe and/or drill collars, including
production consumed internally within your firm.

6

DEFINITIONS--Continued
Shipments.--Shipments of products produced in your establishment(s) in China. Quantities
reported should be net of returns.
Home market commercial shipments.--Shipments, other than internal consumption and
transfers to related firms, within China.
Home market internal consumption/transfers to related firms.--Shipments made to
related firms in China, including product consumed internally by your firm.
Export shipments.--Shipments to destinations outside China, including shipments to
related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.

7