Prestressed Concrete Steel Wire Strand from Brazil, India, Japan, Korea, mexico, and Thailand

INSTRUCTION BOOKLET

GENERAL INFORMATION, INSTRUCTIONS, AND
DEFINITIONS FOR COMMISSION FOREIGN
PRODUCER/EXPORTER QUESTIONNAIRES

PRESTRESSED CONCRETE STEEL WIRE STRAND (“PC STRAND”)
FROM BRAZIL, INDIA, JAPAN, KOREA, MEXICO, AND THAILAND
Investigation Nos. 701-TA-432 and 731-TA-1024-1028 (Review)
and AA1921-188 (Third Review)
Further information.--If you have any questions concerning the enclosed
questionnaire(s) or other matters related to this review, you may contact
the following member of the Commission=s staff (Fax 202-205-3205):
Mary Messer, investigator (202-205-3193; E-mail MARY.MESSER@USITC.GOV)
regarding general questions and trade and related information; and
Joshua Levy, economist (202-205-3236; E-mail JOSHUA.LEVY@USITC.GOV)
regarding market related information.

GENERAL INFORMATION
Background.--On December 8, 1978, the Department of the Treasury issued an antidumping
finding on imports of PC strand from Japan (43 FR 57599). Following five-year reviews by the
Department of Commerce (“Commerce”) and the U.S. International Trade Commission
(“Commission”), effective February 3, 1999, Commerce issued a continuation of the antidumping
duty finding on imports of PC strand from Japan (64 FR 40554, July 27, 1999). Following second
five-year reviews by Commerce and the Commission, effective June 25, 2004, Commerce issued
a second continuation of the antidumping duty finding on imports of PC strand from Japan (69 FR
35584). On January 28, 2004, Commerce issued antidumping duty orders on imports of PC strand
from Brazil, India, Korea, Mexico, and Thailand (69 FR 4109-4113). On February 4, 2004,
Commerce issued a countervailing duty order on imports of PC strand from India (69 FR 5319).
On December 1, 2008, the Commission instituted a third review of the antidumping duty finding
concerning Japan and a first review of the orders concerning Brazil, India, Korea, Mexico, and
Thailand pursuant to section 751(c) of the Tariff Act of 1930 (19 U.S.C. § 1675(c)) (the Act) to
determine whether revocation of the finding and orders would be likely to lead to continuation or
recurrence of material injury to the domestic industry within a reasonably foreseeable time (73 FR
72834). If the Commission makes affirmative determinations, the finding and orders will remain
in place. If the Commission makes negative determinations, Commerce will revoke the finding
and orders.
Questionnaires and other information pertinent to this review are available at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2008/pc_strand/reviewphase
.htm. Address all correspondence to the United States International Trade Commission,
Washington, DC 20436. Hearing-impaired individuals can obtain information regarding these
reviews via the Commission=s TDD terminal (202-205-1810).
Due date of questionnaire(s).--Return the completed questionnaire(s) to the United States
International Trade Commission by no later than July 20, 2009. Although the enclosed postpaid
envelope may be used to return the completed questionnaire, use of an overnight mail service may
be necessary to ensure that your response actually reaches the Commission by July 20, 2009. If
you do not use the enclosed envelope, please make sure the completed questionnaire is sent to the
attention of Mary Messer. Return only one copy of the completed questionnaire(s), but
please keep a copy for your records so that you can refer to it if the Commission staff
contacts you with any questions during the course of the reviews.
Service of questionnaire response(s).--In the event that your firm is a party to these reviews, you
are required to serve a copy of the questionnaire(s), once completed, on parties to the proceeding
that are subject to administrative protective order (see 19 CFR ' 207.7). A list of such parties is
maintained by the Commission=s Secretary and may be obtained by calling 202-205-1803. A
certificate of service must accompany the copy of the completed questionnaire(s) you submit (see
19 CFR ' 207.7).

GENERAL INFORMATION--Continued
Confidentiality.--The commercial and financial data furnished in response to the enclosed
questionnaire(s) that reveal the individual operations of your firm will be treated as confidential by
the Commission to the extent that such data are not otherwise available to the public and will not
be disclosed except as may be required by law (see 19 U.S.C. ' 1677f). Such confidential
information will not be published in a manner that will reveal the individual operations of your
firm; however, nonnumerical characterizations of numerical business proprietary information
(such as discussion of trends) will be treated as confidential business information only at the
request of the submitter for good cause shown.
Verification.--The information submitted in the enclosed questionnaire(s) is subject to audit
and verification by the Commission. To facilitate possible verification of data, please keep
all your workpapers and supporting documents used in the preparation of the questionnaire
response(s).
Release of information.--The information provided by your firm in response to the
questionnaire(s), as well as any other business proprietary information submitted by your firm to
the Commission in connection with the reviews, may become subject to, and released under, the
administrative protective order provisions of the Tariff Act of 1930 (19 U.S.C. ' 1677f) and
section 207.7 of the Commission=s Rules of Practice and Procedure (19 CFR ' 207.7). This means
that certain lawyers and other authorized individuals may temporarily be given access to the
information for use in connection with these reviews or other import-injury investigations or
reviews conducted by the Commission on the same or similar merchandise; those individuals
would be subject to severe penalties if the information were divulged to unauthorized individuals.

INSTRUCTIONS
Answer all questions.--Do not leave any question or section blank unless a questionnaire
expressly directs you to skip over certain questions or sections. If the answer to any question is
Anone,@ write Anone.@ If information is not readily available from your records in exactly the
form requested, furnish carefully prepared estimates--designated as such by the letter
AE@--and explain the basis of your estimates. Answers to questions and any necessary
comments or explanations should be supplied in the space provided or on separate sheets attached
to the appropriate page of the questionnaire(s). If your firm is completing more than one
questionnaire in connection with these reviews (i.e., a producer, importer, purchaser, and/or
foreign producer questionnaire), you need not respond to duplicated questions in the
questionnaires.
Consolidate all establishments in the country for which you are reporting.--Report the requested
data for your establishment(s) located in the subject country. Firms operating more than one
establishment in a given country should combine the data for all establishments in that
country into a single report.
Filing instructions.—Questionnaires may be filed either in paper form or electronically.

INSTRUCTIONS--Continued
OPTIONS FOR FILING IN PAPER FORM
• Overnight mail service.—Mail to the following address:
United States International Trade Commission
Office of Investigations, Room 615-E
500 E Street, SW
Washington, DC 20024
• Fax.—Fax to 202.205.3205.
• U.S. mail.—Mail to the address above, but use zip code 20436. This option is not recommended.
U.S. mail sent to government offices undergoes additional processing to screen for hazardous
materials; this additional processing results in substantial delays in delivery.
OPTIONS FOR FILING ELECTRONICALLY
This questionnaire is available as a “fillable” form in MS Word format on the
Commission’s website at
http://www.usitc.gov/trade_remedy/731_ad_701_cvd/investigations/2008/pc_stra
nd/reviewphase.htm. Please do not attempt to modify the format or permissions
of the questionnaire document. You may complete the questionnaire
electronically, print it out, and submit it in paper form as described above, or you
may submit it electronically through one of the following means:
• Compact disc (CD).—Copy your questionnaire onto a CD, include a signed certification page
(page 1) (either in paper form or scanned PDF copied onto CD), and mail to the address above. It
is strongly recommended that you use an overnight mail service. U.S. mail sent to government
offices undergoes additional processing which not only results in substantial delays in delivery but
may also damage CDs.
• E-mail.—E-mail your questionnaire to the investigator identified on page 1 of the Instruction
Booklet; include a scanned PDF of the signed certification page (page 1). Type the following in
the e-mail subject line: BPI Questionnaire, PC Strand. Please note that submitting your
questionnaire by e-mail may subject your firm’s business proprietary information to transmission
over an unsecure environment and to possible disclosure. If you choose this option, the
Commission warns you that any risk involving possible disclosure of such information is assumed
by the submitter and not by the Commission.
Note: If you are a party to the reviews, and service of the questionnaire is required, such service
should be made in paper form.

DEFINITIONS
Prestressed concrete steel wire strand (PC strand).–Steel strand, produced from wire of
non-stainless, non-galvanized steel, which is suitable for use in prestressed concrete applications
(pre-tensioned and/or post-tensioned). The product definition encompasses covered and
uncovered strand and all types, grades, and diameters of PC strand. PC strand is covered by
statistical reporting numbers 7312.10.3010 and 7312.10.3012 of the Harmonized Tariff Schedule
of the United States (HTS).
Pre-tensioned applications.–In pre-tensioned applications, uncovered and/or uncoated PC strand
is tensioned (pulled tightly and slightly elongated) using a calibrated tensioning apparatus, and
concrete is poured around the PC strand. After the concrete has cured, the tension is released and
the tensile force of the strand induces a compressive force in the concrete. Pre-tensioned
prestressed concrete depends upon the bond between the concrete and the PC strand to hold the
concrete in compression.
Post-tensioned applications.–In post-tensioned applications, PC strand is tensioned using a
calibrated tensioning apparatus after the concrete has cured. In post-tensioned prestressed
concrete, tension is maintained by installing permanent mechanical anchors which remain in place
after the tensioning apparatus is removed. Post-tensioned applications may require
covered/coated, uncovered/uncoated, or epoxy-coated PC strand.
Covered and/or coated PC strand.–PC strand that is lubricated with grease and encased in a
plastic tube or PC strand that is coated with epoxy.
Uncovered and/or uncoated PC strand.–Bare PC strand.
Firm.--An individual proprietorship, partnership, joint venture, association, corporation
(including any subsidiary corporation), business trust, cooperative, trustee in bankruptcy, or
receiver under decree of any court.
Related firm.--A firm that your firm solely or jointly owned, managed, or otherwise controlled; a
firm that solely or jointly owned, managed, or otherwise controlled your firm; and/or a firm that
was solely or jointly owned, managed, or otherwise controlled by a firm that also solely or jointly
owned, managed, or otherwise controlled your firm.
Establishment.--Each facility of a firm in a subject country involved in the production of PC
strand (as defined above), including auxiliary facilities operated in conjunction with (whether or
not physically separate from) such facilities.
United States.--For purposes of these reviews, the 50 States, Puerto Rico, the U.S. Virgin Islands,
and the District of Columbia.

DEFINITIONS--Continued
Importer.--Any person or firm engaged, either directly or through a parent company or subsidiary,
in importing PC strand (as defined above) into the United States from a foreign manufacturer or
through its selling agent.
Average production capacity.--The level of production that your establishment(s) could
reasonably have expected to attain during the specified periods. Assume normal operating
conditions (i.e., using equipment and machinery in place and ready to operate; normal operating
levels (hours per week/weeks per year) and time for downtime, maintenance, repair, and cleanup;
and a typical or representative product mix).
Production.--All production in your establishment(s) in a subject country, including production
consumed internally within your firm.
Shipments.--Shipments of products produced in your establishment(s) in a subject country.
Shipment quantities.—Quantities reported should be net of returns.
Shipment values.—Values reported should be net values (i.e., gross sales values less all
discounts, allowances, rebates, prepaid freight, and the value of returned goods) in U.S.
dollars, f.o.b. your point of shipment in the subject country.
Home market commercial shipments.--Shipments, other than internal consumption and
transfers to related firms, within the subject country.
Home market internal consumption/transfers to related firms.--Shipments made to
related firms in the subject country, including product consumed internally by your firm.
Export shipments.--Shipments to destinations outside the subject country, including
shipments to related firms.
Inventories.--Finished goods inventory, not raw materials or work-in-progress.

DEFINITIONS--Continued
Buy America, Buy American.–“Buy America” requirements apply to iron and steel products and
their coatings that are purchased for the Federal-aid highway construction program (highways,
bridges, transit systems, and terminals). Under Buy America, Federal-aid funds may not be
obligated for a project unless iron and steel products used in such projects are manufactured in the
United States. (Manufacturing is any process that modifies the chemical content; physical shape
or size; or final finish of a product. Manufacturing begins with the initial melting and mixing, and
continues through the bending and coating stages (coating includes epoxy coating, galvanizing,
painting, and any other coating that protects or enhances the value of the coated steel or iron
product/component)). An exception is that foreign-source materials valued at the greater of
$2,500, or 0.1 percent of the original contract value, are permitted; value is based on the value “as
delivered to the project site,” and is the total for the project for all foreign-source materials. Under
an alternate-bid procedure, foreign-source materials may be used if the total project bid using
foreign-source materials is 25 percent less than the lowest total bid using domestic materials.
“Buy American” is a separate and distinct program from Buy America, and has completely
different rules. The Buy American Act, which covers specified products, requires the Federal
Government to purchase domestic goods and services unless the head of the agency involved in
the procurement has determined that the prices of the domestic suppliers are “unreasonable” or
that their purchase would be “inconsistent with the public interest.”
For purposes of this questionnaire, the term “Buy America(n)” refers to any Buy America
or Buy American program described above as well as to any other program imposed at the federal,
state, local, or private level that limits or favors purchases of PC strand to material of U.S. origin.
In the case of private purchases, such programs include any restrictions or preferences for U.S.
origin material that are imposed as a matter of formal or informal policy or practice.