Published 60-DAY Notice

Federal Register / Vol. 73, No. 21 / Thursday, January 31, 2008 / Notices
Development in the Environmental Health
Sciences; 93.113, Biological Response to
Environmental Health Hazards; 93.114,
Applied Toxicological Research and Testing,
National Institutes of Health, HHS)
Dated: January 24, 2008.
Jennifer Spaeth,
Director, Office of Federal Advisory
Committee Policy.
[FR Doc. 08–418 Filed 1–30–08; 8:45 am]

Dated: January 24, 2008.
Jennifer Spaeth,
Director, Office of Federal Advisory
Committee Policy.
[FR Doc. 08–422 Filed 1–30–08; 8:45 am]

BILLING CODE 4140–01–M

DEPARTMENT OF HEALTH AND
HUMAN SERVICES

BILLING CODE 4140–01–M

National Institutes of Health

DEPARTMENT OF HOMELAND
SECURITY

National Institute of Nursing Research;
Notice of Closed Meeting
Pursuant to section 10(d) of the
Federal Advisory Committee Act, as
amended (5 U.S.C. Appendix 2), notice
is hereby given of the following
meeting.
The meeting will be closed to the
public in accordance with the
provisions set forth in sections
552b(c)(4) and 552b(c)(6), Title 5 U.S.C.,
as amended. The grant applications and
the discussions could disclose
confidential trade secrets or commercial
property such a patentable material, and
personal information concerning
individuals associated with the grant
applications, the disclosure of which
would constitute a clearly unwarranted
invasion of personal privacy.

rwilkins on PROD1PC63 with NOTICES

the Contact Person listed on this notice. The
statement should include the name, address,
telephone number and when applicable, the
business or professional affiliation of the
interested person.
(Catalogue of Federal Domestic Assistance
Program Nos. 93.361, Nursing Research,
National Institutes of Health, HHS)

Name of Committee: National Institute of
Nursing Research Special Emphasis Panel,
NINR Chronic Illness P01 RFA Review.
Date: March 5–6, 2008.
Time: 8 a.m. to 5 p.m.
Agenda: To review and evaluate grant
applications.
Place: Bethesda Marriott, 5151 Pooks Hill
Road, Bethesda, MD 20814.
Contact Person: Yujing Liu, PhD, MD,
Chief, Office of Review, Division of
Extramural Activities, National Institute of
Nursing Research, National Institutes of
Health, 6701 Democracy Blvd., Ste 710,
Bethesda, MD 20892, (310) 451–5152,
yujing_liu@nih.gov.
Any member of the public interested in
presenting oral comments to the committee
may notify the Contact Person listed on this
notice at least 10 days in advance of the
meeting. Interested individuals and
representatives of organizations may submit
a letter on intent, a brief description of the
organization represented, and a short
description of the oral presentation. Only one
representative of an organization may be
allowed to present oral comments and if
accepted by the committee, presentations
may be limited to five minutes. Both printed
and electronic copies are requested for the
record. In addition, any interested person
may file written comments with the
committee by forwarding their statement to

VerDate Aug<31>2005

18:07 Jan 30, 2008

Jkt 214001

Office of the Secretary, Office of
Policy, Private Sector Office, DHS;
Welcome to the United States Survey
Office of Policy, Private Sector
Office, DHS.
ACTION: 60-Day Notice and request for
comments; Reinstatement without
change of a previously approved
information collection OMB Control
Number 1601–0003.
AGENCY:

SUMMARY: The Department of Homeland
Security, Office of the Secretary, Office
of Policy, Private Sector Office will
submit this reinstatement without
change for the following information
collection request (ICR) to the Office of
Management and Budget (OMB) for
review and clearance in accordance
with the Paperwork Reduction Act of
1995 (Pub. L. 104–13, 44 U.S.C. Chapter
35). The Private Sector Office is
soliciting comments concerning the
reinstatement without change to a
previously approved information
collection, Welcome to the United
States Survey.
DATES: Comments are encouraged and
will be accepted until March 31, 2008.
This process is conducted in accordance
with 5 CFR 1320.1.
ADDRESSES: Written comments and/or
suggestions regarding the item(s)
contained in this notice, especially
regarding the estimated public burden
and associated response time, should be
directed to the Department of Homeland
Security (DHS), Office of the Secretary,
Office of Policy, Plans and International
Affairs, Attn: Jenny Randall, Room
10360A, Washington, DC 20528.
Comments may also be submitted via email at Jenny.R.Randall@HQ.DHS.GOV.
FOR FURTHER INFORMATION CONTACT: If
additional information is required
contact: The Department of Homeland
Security (DHS), Private Sector Office,
Jenny Randall (202) 282–9801, this is
not a toll free number.

PO 00000

Frm 00073

Fmt 4703

Sfmt 4703

5861

The
Department of Homeland Security
(DHS), Office of the Secretary, Office of
Policy, Private Sector Office, in
conjunction with Customs and Border
Protection (CBP) and Research Triangle
Institute, International, will interview
foreign visitors entering the United
States at four southern border ports of
entry, three northern border ports of
entry and four airport ports of entry.
This survey will measure how CBP is
serving the American public with
vigilance and integrity, while providing
courteous and helpful treatment to
visitors, immigrants and travelers.
Additionally, this survey will further
the Rice-Chertoff Initiative as has been
announced by evaluating the two model
airports (Dulles International Airport,
Chantilly, VA, and Houston
International Airport, Houston, TX) for
baseline information as well as how
welcomed foreign visitors feel upon
entering the United States and
interacting with a DHS Customs and
Border Protection officer.
The Office of Management and Budget
is particularly interested in comments
which:
1. Evaluate whether the proposed
collection of information is necessary
for the proper performance of the
functions of the agency, including
whether the information will have
practical utility;
2. Evaluate the accuracy of the
agency’s estimate of the burden of the
proposed collection of information,
including the validity of the
methodology and assumptions used;
3. Enhance the quality, utility, and
clarity of the information to be
collected; and
4. Minimize the burden of the
collection of information on those who
are to respond, including through the
use of appropriate automated,
electronic, mechanical, or other
technological collection techniques or
other forms of information technology,
e.g., permitting electronic submissions
of responses.

SUPPLEMENTARY INFORMATION:

Analysis
Agency: Department of Homeland
Security, Office of the Secretary, Office
of Policy, Private Sector Office.
Title: Welcome to the United States
Survey.
OMB Number: 1601–0003.
Frequency: One-time collection.
Affected Public: Foreign visitors into
the United States.
Number of Respondents: 939
respondents.
Estimated Time per Respondent: 5
minutes per response.

E:\FR\FM\31JAN1.SGM

31JAN1

5862

Federal Register / Vol. 73, No. 21 / Thursday, January 31, 2008 / Notices
scenarios will result in the goods being
considered products of the Netherlands.
Section 177.29, CBP Regulations (19
CFR 177.29), provides that notice of
final determinations shall be published
in the Federal Register within 60 days
of the date the final determination is
issued. Section 177.30, CBP Regulations
(19 CFR 177.30), provides that any
party-at-interest, as defined in 19 CFR
177.22(d), may seek judicial review of a
final determination within 30 days of
publication of such determination in the
Federal Register.

Total Burden Hours: 78.25 annual
burden hours.
Total Burden Cost (capital/startup):
None.
Total Burden Cost (operating/
maintaining): None.
Scott Charbo,
Chief Information Officer.
[FR Doc. E8–1808 Filed 1–30–08; 8:45 am]
BILLING CODE 4410–10–P

DEPARTMENT OF HOMELAND
SECURITY

Dated: January 25, 2008.
Sandra L. Bell,
Executive Director, Office of Regulations and
Rulings, Office of International Trade.

Bureau of Customs and Border
Protection
Notice of Issuance of Final
Determination Concerning Printers
U.S. Customs and Border
Protection, Department of Homeland
Security.
ACTION: Notice of final determination.

rwilkins on PROD1PC63 with NOTICES

AGENCY:

SUMMARY: This document provides
notice that the Bureau of Customs and
Border Protection (‘‘CBP’’) has issued a
final determination concerning the
country of origin of certain printers
which may be offered to the United
States Government under an
undesignated government procurement
contract. CBP has concluded that the
operations performed in each of two
scenarios will result in the goods being
considered products of the Netherlands.
DATES: The final determination was
issued on January 25, 2008. A copy of
the final determination is attached. Any
party-at-interest, as defined in 19 CFR
177.22(d), may seek judicial review of
this final determination within 30 days
of January 31, 2008.
FOR FURTHER INFORMATION CONTACT:
Gerry O’Brien, Valuation and Special
Programs Branch, Regulations and
Rulings, Office of International Trade
(202–572–8792).
SUPPLEMENTARY INFORMATION: Notice is
hereby given that on January 25, 2008,
pursuant to subpart B of part 177, CBP
Regulations (19 CFR part 177, subpart
B), CBP issued a final determination
concerning the country of origin of
certain printers which may be offered to
the United States Government under an
undesignated government procurement
contract. This final determination, in
HQ H013150, was issued at the request
of Oce´ North America under procedures
set forth at 19 CFR part 177, subpart B,
which implements Title III of the Trade
Agreements Act of 1979, as amended
(19 U.S.C. 2511–18). In the final
determination, CBP concluded that the
operations performed in each of two

VerDate Aug<31>2005

18:07 Jan 30, 2008

Jkt 214001

HQ H013150
January 25, 2008
MAR–2–05 OT:RR:CTF:VS H013150 GOB
Category: Marking
David M. Murphy, Esq. Grunfeld, Desiderio,
Lebowitz, Silverman & Klestadt LLP, 399
Park Avenue, 25th Floor, New York, NY
10022–4877
RE: U.S. Government Procurement; Title III,
Trade Agreements Act of 1979 (19 U.S.C.
2511); Subpart B, Part 177, CBP
Regulations; Country of Origin of
Printers
Dear Mr. Murphy:
This is in response to your letter dated May
30, 2007, which we received by facsimile
transmission on June 19, 2007, requesting a
final determination on behalf of Oce´ North
America (‘‘Oce´ ’’), pursuant to subpart B of
Part 177, Customs and Border Protection
(‘‘CBP’’) Regulations (19 CFR 177.21 et seq.).
We received your revised submission on July
17, 2007. Pursuant to our request for
additional information, you submitted
correspondence of September 28, 2007,
November 2, 2007, and November 26, 2007.
Under the pertinent regulations, which
implement Title III of the Trade Agreements
Act of 1979 (‘‘TAA’’), as amended (19 U.S.C.
2511 et seq.), CBP issues country of origin
advisory rulings and final determinations as
to whether an article is or would be a product
of a designated country or instrumentality for
the purpose of granting waivers of certain
‘‘Buy American’’ restrictions in U.S. law or
practice for products offered for sale to the
U.S. Government. You state that Oce´ will be
the importer of the subject merchandise.
This final determination concerns the
country of origin of certain ‘‘Cobalt’’ printers.
We note that Oce´ is a party-at-interest within
the meaning of 19 CFR 177.22(d)(1) and is
entitled to request this final determination.
Facts:
You describe the pertinent facts as follows.
The Cobalt printer is a newly-designed wideformat printer, incorporating revolutionary
print technology which was developed by
Oce´ Technologies BV in the Netherlands. The
printer will be capable of printing wide
format color documents using Oce´ ’s
advanced imaging devices. The
subassemblies for this printer are: Imaging
devices; upper module; printer cartridges; cut

PO 00000

Frm 00074

Fmt 4703

Sfmt 4703

and receiving unit; frame lower unit; power
supply unit; controller, including embedded
software; and media drawer. Based upon
customer needs, customized software
options, developed in the Netherlands and
France, will be available. Some of the printer
subassemblies will be assembled in the
Netherlands, some will be assembled in
Malaysia. You state that, after the
subassemblies are completed, they will
undergo a ‘‘substantial configuration’’ in
either the Netherlands or the United States.
You claim that the imaging devices and the
printer cartridges are the most important
components of the printer system. The
imaging devices are claimed to be the
printer’s most complex component and are
the key to its function and capabilities
because this particular printer is designed to
create wide format printed sheets. The
printer functions by converting a computer
image signal into numerous signals and then
steering each of the imaging devices, which
perform the actual print process. The
printing unit is steered by the printed board
assembly of the imaging devices, which
creates a fixed print onto a sheet of paper.
The process allows the movement of the
paper under the imaging devices, which
require the use of printer ink/toner which is
replenished with ink/toner from the
cartridges when the ink/toner level lowers.
The imaging devices will be produced in Oce´
Technologies’ new manufacturing site in the
Netherlands from parts of European origin
obtained from European suppliers, including
a printed board assembly. Each imaging
device is filled with blank ink/toner and
tested in the Netherlands. You state that
‘‘Oce´ Technologies employs trained and
highly skilled operators and technicians to
manufacture the imaging devices in its high
tech manufacturing facility.’’ The imaging
devices comprise fifty three percent (53%) of
the printer’s value.
The printer cartridges contain color ink/
toner which is used to print the image. The
ink/toner cartridge will be produced in Oce´
Technologies’ manufacturing facility in the
Netherlands, using plastic parts sourced in
China. The cartridges will be filled with ink/
toner and an EPROM (chip) inserted in the
Netherlands. The chip controls
communication with the engine controller.
The following subassemblies will be
assembled in Malaysia. The upper module,
which is constructed from subunits
consisting of various plates, guides, shafts,
motors, printed circuit boards, and bundles,
moves and guides the imaging devices along
in a carriage. The upper module will be
assembled in Malaysia from approximately
600 parts in a process primarily involving
screwing operations using workers who are
‘‘low trained and low skilled.’’ European
parts constitute forty percent (40%) of the
value of the upper module. The upper
module comprises approximately twenty
seven percent (27%) of the printer’s value.
The controller, developed by Oce´
Technologies, converts the raw computer
signal into specific signals to each imaging
device. The keys to the controller are the
mainboard, which will be sourced from a
European supplier and of European origin,
and its software, developed by Oce´

E:\FR\FM\31JAN1.SGM

31JAN1