MC-33319 (2002 Version)

Form MC-33319

Page 8

16 DETAILED COST OF MATERIALS, PARTS, AND SUPPLIES
General - The materials, parts, and supplies listed below are those commonly consumed in the manufacture,
processing, or assembly of the products listed in 22 . Please review the entire list and report separately each item
consumed. Leave blank if you do not consume the item. If you use materials, parts, and supplies that are not listed,
describe and report them in the "Cost of all other materials . . . " at the end of this section. If you consumed less than
$25,000 of a listed material, include the value with "Cost of all other materials . . . " Census material code 009700 99 8.
Report materials, parts, and supplies purchased, transferred from other plants of your company, or withdrawn from
inventory.
If quantities are requested, please use the unit of measure specified.
If the information as requested cannot be taken directly from your book records, REASONABLE ESTIMATES ARE
ACCEPTABLE.
Valuation of Materials Consumed - The value of the materials, etc., consumed should be based on the delivered
cost; i.e., the amount paid or payable after discounts and including freight and other direct charges incurred in
acquiring the materials.
Materials received from other plants within your company should be reported at their full economic value (the value
assigned by the shipping plant, plus the cost of freight and other handling charges).
If purchases or transfers do not differ significantly from the amounts actually put into production, you may report
the cost of purchases or transfers. However, if consumption differs significantly from the amounts purchased or
transferred, these amounts should be adjusted for changes in the materials and supplies inventories by adding the
beginning inventory to the amount purchased or transferred and subtracting ending inventory.
Contract Work - Include as materials consumed those you purchased for use by others making products for you
under contract. Amounts paid to the companies doing the contract work should be reported in 15 , line A5, and should
include freight in and out. On the other hand, materials owned by others but used at this establishment in making
products for others under contract or on commission should be excluded.

Line No.

Resales - Cost for products bought and sold or transferred from other establishments of your company and sold
without further manufacture, processing, or assembly should be reported in 15 , line A2, not in 16 . The value of these
products shipped by this establishment should be reported in 22 under Census product code 000999 8900 6, "Resales."

Census material
code

Materials, parts, and supplies

Consumption of purchased
materials and of materials
received from other
establishments of your
company
Cost, including delivery cost
(freight-in)
$ Bil.

0634

0630

Mil.

Thou.

0631

Fluid power products (hydraulic and pneumatic)
1

Pumps, motors, and hydrostatic transmissions

2

Cylinders and rotary actuators

3

Filters

4

Hose or tube fittings and assemblies

. . . . . . . . . . . . . . . . . . . . . .

332912 03 9

5

Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

332912 07 0

. . . . . . . . . . . . . . . .

333996 01 5

. . . . . . . . . . . . . . . . . . . . . . . . . .

333995 01 7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333999 01 9

6

Bolts, nuts, screws, washers, rivets, and other screw machine products

7

Other fabricated metal products, excluding fluid power products

8

Forgings

.

332722 03 2

. . . . .

332000 63 7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

332100 01 5

33319088

Fabricated metal products (excluding castings and forgings)

Castings (rough and semifinished)
9

Iron and steel

10

Nonferrous (aluminum, copper, etc.)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .

331510 01 6
331520 11 4

CONTINUE WITH 16 ON PAGE 9

CONTINUE ON PAGE 9

Form MC-33319

Page 9

If not shown, please enter your 11-digit Census File
Number (CFN) from the mailing address.

Line No.

16 DETAILED COST OF MATERIALS, PARTS, AND SUPPLIES - Continued

Census material
code

Materials, parts, and supplies

Consumption of purchased
materials and of materials
received from other
establishments of your
company
Cost, including delivery cost
(freight-in)
$ Bil.

0634

0630

Mil.

Thou.

0631

Shapes and forms (excluding castings, forgings, and fabricated metal
products)
Steel
11

Bars, bar shapes, and plate

12

Sheet and strip

13

Structural shapes

. . . . . . . . . . . . . . . . . . . . . . . . . .

331200 07 1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

331200 17 0

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

331200 69 1

14

All other steel shapes and forms . . . . . . . . . . . . . . . . . . . . . . .

331200 91 5

15

Nonferrous shapes and forms (including copper and copper-base alloy
and aluminum and aluminum-base) . . . . . . . . . . . . . . . . . . . . . . .

331000 AJ 9

Electric motors and generators
Fractional horsepower electric motors (less than 1 hp)
16

Timing motors, synchronous and subsynchronous . . . . . . . . . . . .

335312 09 6

17

Other fractional horsepower electric motors (less than 1 hp)
(excluding timing motors) . . . . . . . . . . . . . . . . . . . . . . . . . . .

335312 17 9

18

Integral horsepower motors and generators (1 hp or more)

. . . . . . . .

335312 21 1

. . . . . . . . . .

001900 B1 6

19

Electrical transmission, distribution, and control equipment

20

Electrical industrial capacitors, resistors, rheostats, and coil windings

. . . .

335000 07 1

21

Electrical instrument mechanisms and meter movements (including
instrument relays) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

334515 01 2

22

Numerical controls for metalworking machinery (excluding programmable)

335314 09 2

23

Programmable controllers for metalworking machinery

. . . . . . . . . . . . .

335314 11 8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

332991 05 8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

332991 03 3

24

Ball

25

Roller

26

Speed changers, gears, and industrial high-speed drives

27

Wood boxes, pallets, skids, and containers

. . . . . . . . . . . .

333612 00 0

. . . . . . . . . . . . . . . . . . . .

321920 01 9

28

Cutting tools for machine tools . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333515 03 9

29

Printed circuit assemblies, loaded boards or modules (printed circuit boards
with inserted electronic components) . . . . . . . . . . . . . . . . . . . . . . . .

001900 C4 9

33319096

Bearings (mounted or unmounted)

CONTINUE WITH 16 ON PAGE 10
CONTINUE ON PAGE 10

Form MC-33319

Page 10

Line No.

16 DETAILED COST OF MATERIALS, PARTS, AND SUPPLIES - Continued

Census material
code

Materials, parts, and supplies

Consumption of purchased
materials and of materials
received from other
establishments of your
company
Cost, including delivery cost
(freight-in)
$ Bil.

0634

0630

30

Printed circuit boards (without inserted components) for electronic circuitry

334412 00 4

31

Semiconductors, including transistors, diodes, rectifiers, and integrated
circuits for electronic circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

334413 00 2

32

Other components and accessories for electronic circuitry, nec, excluding
tubes
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

001900 D3 0

33

Paper and paperboard containers, including shipping sacks and other paper
packaging supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

322200 17 1

34

Fabricated plastics products (excluding gaskets, hoses, and belting)

. . . . .

326100 07 0

35

Optical instruments and lenses (excluding sighting, tracking, and fire
control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333314 01 1

36

Electronic computing equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .

334100 01 3

37

Electronic communication equipment . . . . . . . . . . . . . . . . . . . . . . . .

334220 01 9

Mil.

Thou.

0631

Cost of all other materials and components, parts, containers, and supplies
consumed (Specify the principal materials, etc. included in this value.) (See
instruction 5 regarding machine tool subassemblies and knockdowns)
38

39

009700 99 8

TOTAL (Should equal total reported in 15 , line A1)

. . . . . . . . . . . . . . .

771000 00 7

17 – 21 Not Applicable.
22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE

If the information as requested cannot be taken directly from your book records, REASONABLE ESTIMATES ARE
ACCEPTABLE.
Valuation of Products - Report the value of the products shipped and services performed at the net selling value,
f.o.b. plant to the customer; i.e., after discounts and allowances, and exclusive of freight charges and excise taxes.
If you transfer products to other establishments within your company, you should assign the full economic value to
the transferred products; i.e., include all direct costs of production and a reasonable proportion of all other costs and
profits.
Contract Work - Report PRODUCTS MADE BY OTHERS FOR YOU FROM YOUR MATERIALS on the specific lines as if
they were made in this establishment. On the other hand, do not report on the specific product lines PRODUCTS THAT
YOU MADE FROM MATERIALS OWNED BY OTHERS. Report only the amount that you received for "commission or
contract receipts" under Census code 000930 0000 8.
CONTINUE WITH 22 ON PAGE 11

CONTINUE ON PAGE 11

33319104

General - The manufactured products and services listed below are generally made in your industry. If you make
products that are not listed, describe and report them in the "All other products made in this establishment" section at
the end of 22 . PLEASE DO NOT COMBINE PRODUCT LINES.
If quantities are requested, please use the unit of measure specified.

Form MC-33319

Page 11

If not shown, please enter your 11-digit Census File
Number (CFN) from the mailing address.
22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Resales - Do not report on the specific product lines those PRODUCTS BOUGHT AND SOLD OR TRANSFERRED FROM
OTHER ESTABLISHMENTS OF YOUR COMPANY AND SOLD WITHOUT FURTHER MANUFACTURE. Report only a value
under Census code 000999 8900 6, "Resales."
Machine Tool Subassemblies and Knockdowns - Report the sale of purchased machine tool subassemblies and
knockdowns under Census product code 000999 8900 6, "Resales," (line 76).

Line No.

Detailed Data Reported Elsewhere - Items denoted by an asterisk (*) require totals for groups of products covered
in the more frequent Current Industrial Reports (CIR). If you report on the CIR form, the sum of the detailed products
should equal the total reported on this form.
NOTE: Only totals are requested; do not duplicate detail reported on the CIR.
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

1

Boring machines (excluding machining centers) and drilling machines
(excluding machining centers) (Corresponds to the value of shipments
reported on CIR Form MQ333W, Metalworking Machinery, for 2002, item
codes 1110 - 1265)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 A100 9

2

Gear-cutting machines (Corresponds to the value of shipments reported on
CIR Form MQ333W, Metalworking Machinery, for 2002, item code 1991)* . .

333512 1100 9

3

Grinding, polishing, buffing, honing, and lapping machines, except geartooth grinding, lapping, polishing, and buffing machines (Corresponds
to the value of shipments reported on CIR Form MQ333W, Metalworking
Machinery, for 2002, item codes 2010 - 2740.)* . . . . . . . . . . . . . . . . . .

333512 2100 8

4

Lathes (turning machines) numerically and nonnumerically controlled
(Corresponds to the value of shipments reported on CIR Form MQ333W,
Metalworking Machinery, for 2002, item codes 2801 - 3102)* . . . . . . . . . .

333512 3100 7

5

Milling machines (excluding machining centers) (Corresponds to the value
of shipments reported on CIR Form MQ333W, Metalworking Machinery, for
2002, item codes 3309 - 3675.)* . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 4100 6

6

Machining centers (multifunction numerically controlled machines)
(Corresponds to the value of shipments reported on CIR Form MQ333W,
Metalworking Machinery, for 2002, item codes 3721 - 3736)* . . . . . . . . . .

333512 7100 3

7

Station type machines (Corresponds to the value of shipments reported on
CIR Form MQ333W, Metalworking Machinery, for 2002, item codes 3821 3825)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 8100 2

8

Other metal cutting machine tools (except those designed primarily for
home workshops, laboratories, garages, etc.) (Corresponds to the value of
shipments reported on CIR Form MQ333W, Metalworking Machinery, for
2002, item codes 3840 - 4630.)* . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 9100 1

Mil.

Thou.

0731

9

Drilling machines

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 5101 3

10

Grinding and polishing machines (including crankshaft regrinding and
valve grinding machines) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 5106 2

11

Sawing and cut-off machines . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 5116 1

33319112

Machine tools designed primarily for home workshops, laboratories,
garages, etc. (metalworking and primarily metalworking only)

Other metalworking (or primarily metalworking) types (including
automotive cylinder reboring machines and lathes) (Specify kind.)

12

333512 5199 7
CONTINUE WITH 22 ON PAGE 12
CONTINUE ON PAGE 12

Form MC-33319

Page 12

Line No.

22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

Mil.

Thou.

0731

Parts for metal cutting type machine tools, sold separately, rebuilt metal
cutting type machine tools, and remanufactured metal cutting machine tools
13

Parts for metal cutting machine tools

. . . . . . . . . . . . . . . . . . . . . .

333512 6101 2

14

Rebuilt metal cutting type machine tools (includes machines returned to
same configuration they were in when new from factory) . . . . . . . . .

333512 6107 9

15

Remanufactured metal cutting type machine tools (includes machines
in which the original carcass is reused and all possible modern
improvements have been incorporated) (Corresponds to the value of
shipments reported on CIR Form MQ333W, Metalworking Machinery, for
2002, item code 4700)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333512 6111 1

16

Punching and shearing machines (including power and manual) and
bending and forming machines (power only) (Corresponds to the value of
shipments reported on CIR Form MQ333W, Metalworking Machinery, for
2002, item codes 5009 - 5270.)* . . . . . . . . . . . . . . . . . . . . . . . . . . .

333513 1100 7

17

Metalworking presses (except forging and die-stamping presses)
(Corresponds to the value of shipments reported on CIR Form MQ333W,
Metalworking Machinery, for 2002, item codes 5409 - 6305)* . . . . . . . . . .

333513 3100 5

18

Other metal forming machine tools, including forging and die-stamping
machines (except metalworking presses) (Corresponds to the value of
shipments reported on CIR Form MQ333W, Metalworking Machinery, for
2002, item codes 6405 - 7173.)* . . . . . . . . . . . . . . . . . . . . . . . . . . .

333513 5100 3

Parts for metal forming machine tools, sold separately, rebuilt metal forming
machine tools, and remanufactured metal forming machine tools
19

Parts for die-casting machines

20

Other parts for metal forming machine tools

. . . . . . . . . . . . . . . . .

333513 7111 8

21

Rebuilt metal forming machine tools (includes machines returned to
same configuration they were in when new from factory) . . . . . . . . .

333513 7117 5

22

Remanufactured metal forming machine tools (includes machines in
which the basic carcass is reused and all possible modern improvements
have been incorporated) (Corresponds to the value of shipments
reported on CIR Form MQ333W, Metalworking Machinery, for 2002, item
code 7200)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333513 7121 7

23

Hot rolling mill machinery (including combination hot and cold) (except tube
rolling)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333516 1100 0

. . . . . . . . . . . . . . . . . . . . . . . . . .

333513 7101 9

24

Tandem roll mills

25

Single stand roll mills

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

33319120

Cold rolling mill machinery
333516 3101 6
333516 3106 5

Other cold rolling mill machinery and equipment (Specify kind.)

26

333516 3191 7

CONTINUE WITH 22 ON PAGE 13

CONTINUE ON PAGE 13

Form MC-33319

Page 13

If not shown, please enter your 11-digit Census File
Number (CFN) from the mailing address.

Line No.

22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

Mil.

Thou.

0731

Other rolling mill machinery (including tube mill machinery) and parts for all
rolling mill machinery
27

Tube mill machinery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333516 5101 4

28

Processing lines (including pickling and cleaning, tinning, galvanizing,
etc.), scarfing units, and press feed lines . . . . . . . . . . . . . . . . . . . .

333516 5106 3

Other rolling mill machinery and equipment (except parts) (Specify
kind.)

29

333516 5111 3

30

Machined rolls for rolling mills . . . . . . . . . . . . . . . . . . . . . . . . . .

333516 5116 2

31

Parts (except rolls) for rolling mill machinery, sold separately

. . . . . . .

333516 5121 2

32

Rotary transfer (dial or rotary, trunnion, center column) . . . . . . . . . . .

333518 1101 4

33

Inline transfer, synchronous . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333518 1206 1

34

Inline transfer, nonsynchronous

333518 1311 9

Assembly machines

. . . . . . . . . . . . . . . . . . . . . . . . .

Special-purpose and other types (Specify kind.)

35

333518 1416 6

36

Parts and attachments for assembly machines (sold separately) . . . . . .

333518 1521 3

37

Industrial robots, attachments, and parts . . . . . . . . . . . . . . . . . . . . . .

333999 8109 2

Other metalworking machinery (except handheld and ultrasonic)
Machines for weaving and other wire fabricating and wiredrawing
machines and draw benches
38

Draw benches and wiredrawing machines (except dies)

. . . . . . . .

333518 3101 2

39

33319138

Wire rope or wire cable making machines (Specify kind.)

333518 3106 1

Other machines for working wire (Specify kind.)

40

333518 3111 1

CONTINUE WITH 22 ON PAGE 14

CONTINUE ON PAGE 14

Form MC-33319

Page 14

Line No.

22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

Mil.

Thou.

0731

Other metalworking machinery (except handheld and ultrasonic) - Continued
Coil handling equipment (conversion or straightening)
41

Cut-to-length lines

42

Slitting lines

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333518 3116 0

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333518 3121 0

Other metalworking machinery (Specify kind.)

43
44

333518 3126 9

Parts and attachments for other metalworking machinery (sold
separately) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333518 3131 9

Special dies and tools, die sets, jigs, and fixtures
Jigs and fixtures, all types
Gauging and checking types
45

Less than 1,000 lb weight

46

1,000 lb weight or more

. . . . . . . . . . . . . . . . . . . . . . . . .

333514 0101 4

. . . . . . . . . . . . . . . . . . . . . . . . . .

333514 0103 0

All other jigs and fixtures (holding, positioning, layout, assembly, etc.)
Less than 1,000 lb weight
47

Work-holding fixtures

48

Other than work-holding fixtures

49

1,000 lb weight or more

. . . . . . . . . . . . . . . . . . . . . . . . .

333514 0109 7

. . . . . . . . . . . . . . . . . .

333514 0106 3

. . . . . . . . . . . . . . . . . . . . . . . . . .

333514 0112 1

Metalworking forming and drawing dies, all sizes
Forming and drawing dies
50

500 lb weight or less . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333514 0321 8

51

501 to 3,000 lb weight

333514 0326 7

52

More than 3,000 lb weight

. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .

333514 0332 5

53

High-speed steel

54

Carbide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333514 0535 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333514 0538 7

33319146

Metalworking stamping, forging, extrusion, wiredrawing, and
straightening dies
Stamping dies (including lamination and blanking), progressive type

Other (Specify kind.)

55

333514 0429 9

CONTINUE WITH 22 ON PAGE 15

CONTINUE ON PAGE 15

Form MC-33319

Page 15

If not shown, please enter your 11-digit Census File
Number (CFN) from the mailing address.

Line No.

22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

Mil.

Thou.

0731

Special dies and tools, die sets, jigs, and fixtures - Continued
56

All other metalworking dies, including lamination and blanking dies
(punch, trim, notch, pierce, perforate, etc.) . . . . . . . . . . . . . . . . . . .

333514 0423 2

57

Industrial models and prototypes

333514 0878 7

. . . . . . . . . . . . . . . . . . . . . . . .

Other specially designed tooling (Specify kind.)

58

333514 0981 9

Work holding devices
59

Rotary tables, including numerically controlled

. . . . . . . . . . . . . . . .

333515 3146 3

60

Indexing work holders, excluding rotary tables

. . . . . . . . . . . . . . . .

333515 3152 1

61

Collets, jaws, vises

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333515 3154 7

62

Other than collets, jaws, or vises such as mandrels, feeding fingers
clamps, stops, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

333515 3166 1

63

Receipts for machine shop job work and job order repairs

. . . . . . . . . . .

332710 0100 1

All other products made in this establishment - Specify and report each
product with sales value of $50,000 or more that cannot be assigned to
one of the "listed products and services". For all remaining products, write
"Other" and report a single total value.
18

64
26

65
34

66
42

67
59

68
67

69

70

33319153

Contract work - Receipts for work done for others on their materials (Specify
products worked on and kind of work.)

000930 0000 8

Miscellaneous receipts
71

Sales of scrap and refuse

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

000999 8013 8

72

Receipts for installation (or construction) of products of this
establishment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

000999 8031 0

CONTINUE WITH 22 ON PAGE 16

CONTINUE ON PAGE 16

Form MC-33319

Page 16

Line No.

22 DETAIL OF SALES, SHIPMENTS, RECEIPTS, OR REVENUE - Continued
Products and services
*Items correspond to products reported on Current Industrial Reports (CIR)

Census product
code

Products shipped and other
receipts
Value, f.o.b. plant
$ Bil.

0734

0730

Mil.

Thou.

0731

Miscellaneous receipts - Continued
73

Receipts for research and developmental work

74

Receipts for repair work

75

Other miscellaneous receipts

. . . . . . . . . . . . . . . .

000999 8041 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

000999 8061 7

. . . . . . . . . . . . . . . . . . . . . . . . . . .

000999 8098 9

76

Resales - Sales of products bought and sold without further manufacture,
processing, or assembly (The cost of such items should be reported in 15 ,
line A2.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

000999 8900 6

77

TOTAL (Should equal

770000 0000 8

4

, line A) . . . . . . . . . . . . . . . . . . . . . . . . . . .

33319161

23 – 27 Not Applicable.

CONTINUE ON PAGE 17

Form MC-33319

Page 17

If not shown, please enter your 11-digit Census File
Number (CFN) from the mailing address.
28 ESTABLISHMENT ACTIVITIES
This activity was performed -

A. Indicate activities that were performed by this establishment
or were performed for this establishment by another company
during 2002.
(Mark "X" ALL that apply.)
1. Product design/engineering . . . . . . . . . . . . . . . .

By another
By this
establishment
establishment
of this
company

By another
company

Not at all

0921

8071

0941

0961

a. Bundling or kitting (combining multiple items into a
prepackaged product) . . . . . . . . . . . . . . . . .

0923

8072

0943

0963

b. Pick and pack (taking goods from inventory and
packaging them to fill orders) . . . . . . . . . . . . . .

0924

8073

0944

0964

c. Warehousing of finished products . . . . . . . . . . .

0925

8074

0945

0965

d. Breaking bulk (reducing large shipments into smaller
portions for customers) . . . . . . . . . . . . . . . .

0926

8075

0946

0966

e. Local delivery (within a city, town, or other local area,
including adjoining towns and suburban areas) . . . . .

0927

8076

0947

0967

f. Long distance delivery (beyond local areas and
commercial zones) . . . . . . . . . . . . . . . . . . .

0928

8077

0948

0968

g. Processing of returned merchandise . . . . . . . . . .

0932

8078

0952

0972

2. Order fulfillment

1. Manage inventory owned by this establishment AND held at
this location? . . . . . . . . . . . . . . . . . . . . . . .

0936

Yes

0937

No

2. Manage inventory owned by this establishment BUT held at
a customer's location? . . . . . . . . . . . . . . . . . . .

0956

Yes

0957

No

3. Manage inventory owned by another company BUT held at
this location? . . . . . . . . . . . . . . . . . . . . . . .

0976

Yes

0977

No

4. Manage inventory owned by another company AND held
somewhere other than at this location? . . . . . . . . . . .

0994

Yes

0995

No

5. Contract with another firm for any of your production using
materials owned by this location? . . . . . . . . . . . . .

8041

Yes

8042

No

6. Send any partially completed products to a foreign facility
for processing that were then returned to this establishment
for completion? . . . . . . . . . . . . . . . . . . . . . .

8044

Yes

8045

No

7. Manufacture products for a government to their
specifications? . . . . . . . . . . . . . . . . . . . . . .

8047

Yes

8048

No

8. Manufacture products for another business to their
specifications? . . . . . . . . . . . . . . . . . . . . . .

8016

Yes

8017

No

9. Manufacture products for a final retail customer to their
specifications? . . . . . . . . . . . . . . . . . . . . . .

8060

Yes

8062

No

CONTINUE ON PAGE 18

33319179

B. During 2002 did this establishment:

Form MC-33319

Page 18

29 OPERATIONAL STATUS
Activity that best describes this establishment's status at the end of 2002
(Mark "X" only ONE box.)
In operation

0011

Under construction,
development, or
exploration

0012

0060

0013

Temporarily or seasonally inactive

0014

Ceased operation - Give date at right

Month

0018

Day

Year

Sold or leased to another operator Give date at right AND enter new name
and mailing address below

0015

Name of new owner or operator

0061

Employer Identification Number
Enter EIN of new
owner (9 digits)

0062

Mailing address (number and street, P.O. Box, etc.)

0063

City, town, village, etc.

0064

-

State

0065

ZIP Code

Remarks (Please use this space for any explanations that may be essential in understanding your reported data.)

30 CERTIFICATION - This report is substantially accurate and was prepared in accordance with the instructions.

0078

Yes

0079

No - Enter time period covered

Month

Year

Month

FROM
0070

0072

Name of person to contact regarding this report

Area code
Telephone
0074
0076

Internet e-mail address

Number

-

0073

Year

TO

33319187

Is the time period covered by this report a calendar year?

0071

Title

Extension

Area code

Number

Fax

-

0075

Month

Date
completed

Day

0069

Thank you for completing your 2002 Economic Census form.
PLEASE PHOTOCOPY THIS FORM FOR YOUR RECORDS AND RETURN THE ORIGINAL.

Year